# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: NXP PCA954x I2C bus switch

maintainers:
  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>

description:
  The binding supports NXP PCA954x and PCA984x I2C mux/switch devices.

allOf:
  - $ref: /schemas/i2c/i2c-mux.yaml#

properties:
  compatible:
    oneOf:
      - enum:
          - nxp,pca9540
          - nxp,pca9542
          - nxp,pca9543
          - nxp,pca9544
          - nxp,pca9545
          - nxp,pca9546
          - nxp,pca9547
          - nxp,pca9548
          - nxp,pca9846
          - nxp,pca9847
          - nxp,pca9848
          - nxp,pca9849
      - items:
          - const: nxp,pca9646
          - const: nxp,pca9546

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  "#interrupt-cells":
    const: 2

  interrupt-controller: true

  reset-gpios:
    maxItems: 1

  i2c-mux-idle-disconnect:
    type: boolean
    description: Forces mux to disconnect all children in idle state. This is
      necessary for example, if there are several multiplexers on the bus and
      the devices behind them use same I2C addresses.

  idle-state:
    description: if present, overrides i2c-mux-idle-disconnect
    $ref: /schemas/mux/mux-controller.yaml#/properties/idle-state

required:
  - compatible
  - reg

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>

    i2c {
        #address-cells = <1>;
        #size-cells = <0>;

        i2c-mux@74 {
            compatible = "nxp,pca9548";
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <0x74>;

            interrupt-parent = <&ipic>;
            interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
            interrupt-controller;
            #interrupt-cells = <2>;

            i2c@2 {
                #address-cells = <1>;
                #size-cells = <0>;
                reg = <2>;

                eeprom@54 {
                    compatible = "atmel,24c08";
                    reg = <0x54>;
                };
            };

            i2c@4 {
                #address-cells = <1>;
                #size-cells = <0>;
                reg = <4>;

                rtc@51 {
                    compatible = "nxp,pcf8563";
                    reg = <0x51>;
                };
            };
        };
    };
...