Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834 1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871 1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892 1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 2032 2033 2034 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046 2047 2048 2049 2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063 2064 2065 2066 2067 2068 2069 2070 2071 2072 2073 2074 2075 2076 2077 2078 2079 2080 2081 2082 2083 2084 2085 2086 2087 2088 2089 2090 2091 2092 2093 2094 2095 2096 2097 2098 2099 2100 2101 2102 2103 2104 2105 2106 2107 2108 2109 2110 2111 2112 2113 2114 2115 2116 2117 2118 2119 2120 2121 2122 2123 2124 2125 2126 2127 2128 2129 2130 2131 2132 2133 2134 2135 2136 2137 2138 2139 2140 2141 2142 2143 2144 2145 2146 2147 2148 2149 2150 2151 2152 2153 2154 2155 2156 2157 2158 2159 2160 2161 2162 2163 2164 2165 2166 2167 2168 2169 2170 2171 2172 2173 2174 2175 2176 2177 2178 2179 2180 2181 2182 2183 2184 2185 2186 2187 2188 2189 2190 2191 2192 2193 2194 2195 2196 2197 2198 2199 2200 2201 2202 2203 2204 2205 2206 2207 2208 2209 2210 2211 2212 2213 2214 2215 2216 2217 2218 2219 2220 2221 2222 2223 2224 2225 2226 2227 2228 2229 2230 2231 | # SPDX-License-Identifier: GPL-2.0-only # # Multifunction miscellaneous devices # if HAS_IOMEM menu "Multifunction device drivers" config MFD_CORE tristate select IRQ_DOMAIN default n config MFD_CS5535 tristate "AMD CS5535 and CS5536 southbridge core functions" select MFD_CORE depends on PCI && (X86_32 || (X86 && COMPILE_TEST)) help This is the core driver for CS5535/CS5536 MFD functions. This is necessary for using the board's GPIO and MFGPT functionality. config MFD_ALTERA_A10SR bool "Altera Arria10 DevKit System Resource chip" depends on ARCH_INTEL_SOCFPGA && SPI_MASTER=y && OF select REGMAP_SPI select MFD_CORE help Support for the Altera Arria10 DevKit MAX5 System Resource chip using the SPI interface. This driver provides common support for accessing the external gpio extender (LEDs & buttons) and power supply alarms (hwmon). config MFD_ALTERA_SYSMGR bool "Altera SOCFPGA System Manager" depends on ARCH_INTEL_SOCFPGA && OF select MFD_SYSCON help Select this to get System Manager support for all Altera branded SOCFPGAs. The SOCFPGA System Manager handles all SOCFPGAs by using regmap_mmio accesses for ARM32 parts and SMC calls to EL3 for ARM64 parts. config MFD_ACT8945A tristate "Active-semi ACT8945A" select MFD_CORE select REGMAP_I2C depends on I2C && OF help Support for the ACT8945A PMIC from Active-semi. This device features three step-down DC/DC converters and four low-dropout linear regulators, along with a complete ActivePath battery charger. config MFD_SUN4I_GPADC tristate "Allwinner sunxi platforms' GPADC MFD driver" select MFD_CORE select REGMAP_MMIO select REGMAP_IRQ depends on ARCH_SUNXI || COMPILE_TEST depends on !TOUCHSCREEN_SUN4I help Select this to get support for Allwinner SoCs (A10, A13 and A31) ADC. This driver will only map the hardware interrupt and registers, you have to select individual drivers based on this MFD to be able to use the ADC or the thermal sensor. This will try to probe the ADC driver sun4i-gpadc-iio and the hwmon driver iio_hwmon. To compile this driver as a module, choose M here: the module will be called sun4i-gpadc. config MFD_AS3711 bool "AMS AS3711" select MFD_CORE select REGMAP_I2C select REGMAP_IRQ depends on I2C=y help Support for the AS3711 PMIC from AMS config MFD_AS3722 tristate "ams AS3722 Power Management IC" select MFD_CORE select REGMAP_I2C select REGMAP_IRQ depends on I2C=y && OF help The ams AS3722 is a compact system PMU suitable for mobile phones, tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down controllers, 11 LDOs, RTC, automatic battery, temperature and over current monitoring, GPIOs, ADC and a watchdog. config PMIC_ADP5520 bool "Analog Devices ADP5520/01 MFD PMIC Core Support" depends on I2C=y help Say yes here to add support for Analog Devices AD5520 and ADP5501, Multifunction Power Management IC. This includes the I2C driver and the core APIs _only_, you have to select individual components like LCD backlight, LEDs, GPIOs and Kepad under the corresponding menus. config MFD_AAT2870_CORE bool "AnalogicTech AAT2870" select MFD_CORE depends on I2C=y depends on GPIOLIB || COMPILE_TEST help If you say yes here you get support for the AAT2870. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. config MFD_AT91_USART tristate "AT91 USART Driver" select MFD_CORE depends on ARCH_AT91 || COMPILE_TEST help Select this to get support for AT91 USART IP. This is a wrapper over at91-usart-serial driver and usart-spi-driver. Only one function can be used at a time. The choice is done at boot time by the probe function of this MFD driver according to a device tree property. config MFD_ATMEL_FLEXCOM tristate "Atmel Flexcom (Flexible Serial Communication Unit)" select MFD_CORE depends on OF help Select this to get support for Atmel Flexcom. This is a wrapper which embeds a SPI controller, a I2C controller and a USART. Only one function can be used at a time. The choice is done at boot time by the probe function of this MFD driver according to a device tree property. config MFD_ATMEL_HLCDC tristate "Atmel HLCDC (High-end LCD Controller)" select MFD_CORE select REGMAP_MMIO depends on OF help If you say yes here you get support for the HLCDC block. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. config MFD_ATMEL_SMC bool select MFD_SYSCON config MFD_BCM590XX tristate "Broadcom BCM590xx PMUs" select MFD_CORE select REGMAP_I2C depends on I2C help Support for the BCM590xx PMUs from Broadcom config MFD_BD9571MWV tristate "ROHM BD9571MWV PMIC" select MFD_CORE select REGMAP_I2C select REGMAP_IRQ depends on I2C help Support for the ROHM BD9571MWV PMIC, which contains single voltage regulator, voltage sampling units, GPIO block and watchdog block. This driver can also be built as a module. If so, the module will be called bd9571mwv. config MFD_AC100 tristate "X-Powers AC100" select MFD_CORE depends on SUNXI_RSB help If you say Y here you get support for the X-Powers AC100 audio codec IC. This driver include only the core APIs. You have to select individual components like codecs or RTC under the corresponding menus. config MFD_AXP20X tristate select MFD_CORE select REGMAP_IRQ config MFD_AXP20X_I2C tristate "X-Powers AXP series PMICs with I2C" select MFD_AXP20X select REGMAP_I2C depends on I2C help If you say Y here you get support for the X-Powers AXP series power management ICs (PMICs) controlled with I2C. This driver include only the core APIs. You have to select individual components like regulators or the PEK (Power Enable Key) under the corresponding menus. Note on x86 this provides an ACPI OpRegion, so this must be 'y' (builtin) and not a module, as the OpRegion must be available as soon as possible. For the same reason the I2C bus driver options I2C_DESIGNWARE_PLATFORM and I2C_DESIGNWARE_BAYTRAIL must be 'y' too. config MFD_AXP20X_RSB tristate "X-Powers AXP series PMICs with RSB" select MFD_AXP20X depends on SUNXI_RSB help If you say Y here you get support for the X-Powers AXP series power management ICs (PMICs) controlled with RSB. This driver include only the core APIs. You have to select individual components like regulators or the PEK (Power Enable Key) under the corresponding menus. config MFD_CROS_EC_DEV tristate "ChromeOS Embedded Controller multifunction device" select MFD_CORE depends on CROS_EC default CROS_EC help Select this to get support for ChromeOS Embedded Controller sub-devices. This driver will instantiate additional drivers such as RTC, USBPD, etc. but you have to select the individual drivers. To compile this driver as a module, choose M here: the module will be called cros-ec-dev. config MFD_MADERA tristate "Cirrus Logic Madera codecs" select MFD_CORE select REGMAP select REGMAP_IRQ select MADERA_IRQ select PINCTRL select PINCTRL_MADERA help Support for the Cirrus Logic Madera platform audio codecs config MFD_MADERA_I2C tristate "Cirrus Logic Madera codecs with I2C" depends on MFD_MADERA depends on I2C select REGMAP_I2C help Support for the Cirrus Logic Madera platform audio SoC core functionality controlled via I2C. config MFD_MADERA_SPI tristate "Cirrus Logic Madera codecs with SPI" depends on MFD_MADERA depends on SPI_MASTER select REGMAP_SPI help Support for the Cirrus Logic Madera platform audio SoC core functionality controlled via SPI. config MFD_CS47L15 bool "Cirrus Logic CS47L15" select PINCTRL_CS47L15 depends on MFD_MADERA help Support for Cirrus Logic CS47L15 Smart Codec config MFD_CS47L35 bool "Cirrus Logic CS47L35" select PINCTRL_CS47L35 depends on MFD_MADERA help Support for Cirrus Logic CS47L35 Smart Codec config MFD_CS47L85 bool "Cirrus Logic CS47L85" select PINCTRL_CS47L85 depends on MFD_MADERA help Support for Cirrus Logic CS47L85 Smart Codec config MFD_CS47L90 bool "Cirrus Logic CS47L90/91" select PINCTRL_CS47L90 depends on MFD_MADERA help Support for Cirrus Logic CS47L90 and CS47L91 Smart Codecs config MFD_CS47L92 bool "Cirrus Logic CS47L92/93" select PINCTRL_CS47L92 depends on MFD_MADERA help Support for Cirrus Logic CS42L92, CS47L92 and CS47L93 Smart Codecs config MFD_ASIC3 bool "Compaq ASIC3" depends on GPIOLIB depends on ARM || COMPILE_TEST select MFD_CORE help This driver supports the ASIC3 multifunction chip found on many PDAs (mainly iPAQ and HTC based ones) config PMIC_DA903X bool "Dialog Semiconductor DA9030/DA9034 PMIC Support" depends on I2C=y help Say yes here to add support for Dialog Semiconductor DA9030 (a.k.a ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC usually found on PXA processors-based platforms. This includes the I2C driver and the core APIs _only_, you have to select individual components like LCD backlight, voltage regulators, LEDs and battery-charger under the corresponding menus. config PMIC_DA9052 bool select MFD_CORE config MFD_DA9052_SPI bool "Dialog Semiconductor DA9052/53 PMIC variants with SPI" select REGMAP_SPI select REGMAP_IRQ select PMIC_DA9052 depends on SPI_MASTER=y help Support for the Dialog Semiconductor DA9052 PMIC when controlled using SPI. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. config MFD_DA9052_I2C bool "Dialog Semiconductor DA9052/53 PMIC variants with I2C" select REGMAP_I2C select REGMAP_IRQ select PMIC_DA9052 depends on I2C=y help Support for the Dialog Semiconductor DA9052 PMIC when controlled using I2C. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. config MFD_DA9055 bool "Dialog Semiconductor DA9055 PMIC Support" select REGMAP_I2C select REGMAP_IRQ select MFD_CORE depends on I2C=y help Say yes here for support of Dialog Semiconductor DA9055. This is a Power Management IC. This driver provides common support for accessing the device as well as the I2C interface to the chip itself. Additional drivers must be enabled in order to use the functionality of the device. This driver can be built as a module. If built as a module it will be called "da9055" config MFD_DA9062 tristate "Dialog Semiconductor DA9062/61 PMIC Support" select MFD_CORE select REGMAP_I2C select REGMAP_IRQ depends on I2C help Say yes here for support for the Dialog Semiconductor DA9061 and DA9062 PMICs. This includes the I2C driver and core APIs. Additional drivers must be enabled in order to use the functionality of the device. config MFD_DA9063 tristate "Dialog Semiconductor DA9063 PMIC Support" select MFD_CORE select REGMAP_I2C select REGMAP_IRQ depends on I2C help Say yes here for support for the Dialog Semiconductor DA9063 PMIC. This includes the I2C driver and core APIs. Additional drivers must be enabled in order to use the functionality of the device. config MFD_DA9150 tristate "Dialog Semiconductor DA9150 Charger Fuel-Gauge chip" depends on I2C select MFD_CORE select REGMAP_I2C select REGMAP_IRQ help This adds support for the DA9150 integrated charger and fuel-gauge chip. This driver provides common support for accessing the device. Additional drivers must be enabled in order to use the specific features of the device. config MFD_DLN2 tristate "Diolan DLN2 support" select MFD_CORE depends on USB help This adds support for Diolan USB-I2C/SPI/GPIO Master Adapter DLN-2. Additional drivers such as I2C_DLN2, GPIO_DLN2, etc. must be enabled in order to use the functionality of the device. config MFD_ENE_KB3930 tristate "ENE KB3930 Embedded Controller support" depends on I2C depends on MACH_MMP3_DT || COMPILE_TEST select MFD_CORE help This adds support for the power-off functionality and access to the registers that control LEDS and USB port power on ENE KB3930 Embedded Controller. To use the LED functionality LEDS_ARIEL must be enabled. config MFD_EXYNOS_LPASS tristate "Samsung Exynos SoC Low Power Audio Subsystem" depends on ARCH_EXYNOS || COMPILE_TEST select MFD_CORE select REGMAP_MMIO help Select this option to enable support for Samsung Exynos Low Power Audio Subsystem. config MFD_GATEWORKS_GSC tristate "Gateworks System Controller" depends on (I2C && OF) select MFD_CORE select REGMAP_I2C select REGMAP_IRQ help Enable support for the Gateworks System Controller (GSC) found on Gateworks Single Board Computers supporting system functions such as push-button monitor, multiple ADC's for voltage and temperature monitoring, fan controller and watchdog monitor. This driver provides common support for accessing the device. Additional drivers must be enabled in order to use the functionality of the device. config MFD_MC13XXX tristate depends on (SPI_MASTER || I2C) select MFD_CORE select REGMAP_IRQ help Enable support for the Freescale MC13783 and MC13892 PMICs. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. config MFD_MC13XXX_SPI tristate "Freescale MC13783 and MC13892 SPI interface" depends on SPI_MASTER select REGMAP_SPI select MFD_MC13XXX help Select this if your MC13xxx is connected via an SPI bus. config MFD_MC13XXX_I2C tristate "Freescale MC13892 I2C interface" depends on I2C select REGMAP_I2C select MFD_MC13XXX help Select this if your MC13xxx is connected via an I2C bus. config MFD_MP2629 tristate "Monolithic Power Systems MP2629 ADC and Battery charger" depends on I2C select REGMAP_I2C select MFD_CORE help Select this option to enable support for Monolithic Power Systems battery charger. This provides ADC, thermal and battery charger power management functions. config MFD_MXS_LRADC tristate "Freescale i.MX23/i.MX28 LRADC" depends on ARCH_MXS || COMPILE_TEST select MFD_CORE select STMP_DEVICE help Say yes here to build support for the Low Resolution Analog-to-Digital Converter (LRADC) found on the i.MX23 and i.MX28 processors. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device: mxs-lradc-adc for ADC readings mxs-lradc-ts for touchscreen support This driver can also be built as a module. If so, the module will be called mxs-lradc. config MFD_MX25_TSADC tristate "Freescale i.MX25 integrated Touchscreen and ADC unit" select REGMAP_MMIO depends on (SOC_IMX25 && OF) || COMPILE_TEST help Enable support for the integrated Touchscreen and ADC unit of the i.MX25 processors. They consist of a conversion queue for general purpose ADC and a queue for Touchscreens. config MFD_HI6421_PMIC tristate "HiSilicon Hi6421 PMU/Codec IC" depends on OF select MFD_CORE select REGMAP_MMIO help Add support for HiSilicon Hi6421 PMIC. Hi6421 includes multi- functions, such as regulators, RTC, codec, Coulomb counter, etc. This driver includes core APIs _only_. You have to select individual components like voltage regulators under corresponding menus in order to enable them. We communicate with the Hi6421 via memory-mapped I/O. config MFD_HI6421_SPMI tristate "HiSilicon Hi6421v600 SPMI PMU/Codec IC" depends on OF depends on SPMI select MFD_CORE select REGMAP_SPMI help Add support for HiSilicon Hi6421v600 SPMI PMIC. Hi6421 includes multi-functions, such as regulators, RTC, codec, Coulomb counter, etc. This driver includes core APIs _only_. You have to select individual components like voltage regulators under corresponding menus in order to enable them. We communicate with the Hi6421v600 via a SPMI bus. config MFD_HI655X_PMIC tristate "HiSilicon Hi655X series PMU/Codec IC" depends on ARCH_HISI || COMPILE_TEST depends on OF select MFD_CORE select REGMAP_MMIO select REGMAP_IRQ help Select this option to enable Hisilicon hi655x series pmic driver. config HTC_PASIC3 tristate "HTC PASIC3 LED/DS1WM chip support" select MFD_CORE help This core driver provides register access for the LED/DS1WM chips labeled "AIC2" and "AIC3", found on HTC Blueangel and HTC Magician devices, respectively. Actual functionality is handled by the leds-pasic3 and ds1wm drivers. config HTC_I2CPLD bool "HTC I2C PLD chip support" depends on I2C=y && GPIOLIB help If you say yes here you get support for the supposed CPLD found on omap850 HTC devices like the HTC Wizard and HTC Herald. This device provides input and output GPIOs through an I2C interface to one or more sub-chips. config MFD_INTEL_QUARK_I2C_GPIO tristate "Intel Quark MFD I2C GPIO" depends on PCI depends on X86 depends on COMMON_CLK select MFD_CORE help This MFD provides support for I2C and GPIO that exist only in a single PCI device. It splits the 2 IO devices to their respective IO driver. The GPIO exports a total amount of 8 interrupt-capable GPIOs. config LPC_ICH tristate "Intel ICH LPC" depends on PCI select MFD_CORE help The LPC bridge function of the Intel ICH provides support for many functional units. This driver provides needed support for other drivers to control these functions, currently GPIO and watchdog. config LPC_SCH tristate "Intel SCH LPC" depends on PCI select MFD_CORE help LPC bridge function of the Intel SCH provides support for System Management Bus and General Purpose I/O. config INTEL_SOC_PMIC bool "Support for Crystal Cove PMIC" depends on ACPI && HAS_IOMEM && I2C=y && GPIOLIB && COMMON_CLK depends on X86 || COMPILE_TEST depends on I2C_DESIGNWARE_PLATFORM=y select MFD_CORE select REGMAP_I2C select REGMAP_IRQ help Select this option to enable support for Crystal Cove PMIC on some Intel SoC systems. The PMIC provides ADC, GPIO, thermal, charger and related power management functions on these systems. This option is a bool as it provides an ACPI OpRegion which must be available before any devices using it are probed. This option also causes the designware-i2c driver to be builtin for the same reason. config INTEL_SOC_PMIC_BXTWC tristate "Support for Intel Broxton Whiskey Cove PMIC" depends on MFD_INTEL_PMC_BXT select MFD_CORE select REGMAP_IRQ help Select this option to enable support for Whiskey Cove PMIC on Intel Broxton systems. The PMIC provides ADC, GPIO, thermal, charger and related power management functions on these systems. config INTEL_SOC_PMIC_CHTWC bool "Support for Intel Cherry Trail Whiskey Cove PMIC" depends on ACPI && HAS_IOMEM && I2C=y && COMMON_CLK depends on X86 || COMPILE_TEST depends on I2C_DESIGNWARE_PLATFORM=y select MFD_CORE select REGMAP_I2C select REGMAP_IRQ help Select this option to enable support for the Intel Cherry Trail Whiskey Cove PMIC found on some Intel Cherry Trail systems. This option is a bool as it provides an ACPI OpRegion which must be available before any devices using it are probed. This option also causes the designware-i2c driver to be builtin for the same reason. config INTEL_SOC_PMIC_CHTDC_TI tristate "Support for Intel Cherry Trail Dollar Cove TI PMIC" depends on GPIOLIB depends on I2C depends on ACPI depends on X86 select MFD_CORE select REGMAP_I2C select REGMAP_IRQ help Select this option for supporting Dollar Cove (TI version) PMIC device that is found on some Intel Cherry Trail systems. config INTEL_SOC_PMIC_MRFLD tristate "Support for Intel Merrifield Basin Cove PMIC" depends on GPIOLIB depends on ACPI depends on INTEL_SCU select MFD_CORE select REGMAP_IRQ help Select this option for supporting Basin Cove PMIC device that is found on Intel Merrifield systems. config MFD_INTEL_LPSS tristate select COMMON_CLK select MFD_CORE config MFD_INTEL_LPSS_ACPI tristate "Intel Low Power Subsystem support in ACPI mode" select MFD_INTEL_LPSS depends on X86 && ACPI help This driver supports Intel Low Power Subsystem (LPSS) devices such as I2C, SPI and HS-UART starting from Intel Sunrisepoint (Intel Skylake PCH) in ACPI mode. config MFD_INTEL_LPSS_PCI tristate "Intel Low Power Subsystem support in PCI mode" select MFD_INTEL_LPSS depends on X86 && PCI help This driver supports Intel Low Power Subsystem (LPSS) devices such as I2C, SPI and HS-UART starting from Intel Sunrisepoint (Intel Skylake PCH) in PCI mode. config MFD_INTEL_PMC_BXT tristate "Intel PMC Driver for Broxton" depends on X86 depends on X86_PLATFORM_DEVICES depends on ACPI select INTEL_SCU_IPC select MFD_CORE help This driver provides support for the PMC (Power Management Controller) on Intel Broxton and Apollo Lake. The PMC is a multi-function device that exposes IPC, General Control Register and P-unit access. In addition this creates devices for iTCO watchdog and telemetry that are part of the PMC. config MFD_INTEL_PMT tristate "Intel Platform Monitoring Technology (PMT) support" depends on PCI select MFD_CORE help The Intel Platform Monitoring Technology (PMT) is an interface that provides access to hardware monitor registers. This driver supports Telemetry, Watcher, and Crashlog PMT capabilities/devices for platforms starting from Tiger Lake. config MFD_IPAQ_MICRO bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support" depends on SA1100_H3100 || SA1100_H3600 select MFD_CORE help Select this to get support for the Microcontroller found in the Compaq iPAQ handheld computers. This is an Atmel AT90LS8535 microcontroller flashed with a special iPAQ firmware using the custom protocol implemented in this driver. config MFD_IQS62X tristate "Azoteq IQS620A/621/622/624/625 core support" depends on I2C select MFD_CORE select REGMAP_I2C help Say Y here if you want to build core support for the Azoteq IQS620A, IQS621, IQS622, IQS624 and IQS625 multi-function sensors. Additional options must be selected to enable device-specific functions. To compile this driver as a module, choose M here: the module will be called iqs62x. config MFD_JANZ_CMODIO tristate "Janz CMOD-IO PCI MODULbus Carrier Board" select MFD_CORE depends on PCI help This is the core driver for the Janz CMOD-IO PCI MODULbus carrier board. This device is a PCI to MODULbus bridge which may host many different types of MODULbus daughterboards, including CAN and GPIO controllers. config MFD_KEMPLD tristate "Kontron module PLD device" select MFD_CORE help This is the core driver for the PLD (Programmable Logic Device) found on some Kontron ETX and nearly all COMexpress (ETXexpress) modules as well as on some other Kontron products. The PLD device may provide functions like watchdog, GPIO, UART and I2C bus. This driver can also be built as a module. If so, the module will be called kempld-core. config MFD_88PM800 tristate "Marvell 88PM800" depends on I2C select REGMAP_I2C select REGMAP_IRQ select MFD_CORE help This supports for Marvell 88PM800 Power Management IC. This includes the I2C driver and the core APIs _only_, you have to select individual components like voltage regulators, RTC and battery-charger under the corresponding menus. config MFD_88PM805 tristate "Marvell 88PM805" depends on I2C select REGMAP_I2C select REGMAP_IRQ select MFD_CORE help This supports for Marvell 88PM805 Power Management IC. This includes the I2C driver and the core APIs _only_, you have to select individual components like codec device, headset/Mic device under the corresponding menus. config MFD_88PM860X bool "Marvell 88PM8606/88PM8607" depends on I2C=y select REGMAP_I2C select MFD_CORE help This supports for Marvell 88PM8606/88PM8607 Power Management IC. This includes the I2C driver and the core APIs _only_, you have to select individual components like voltage regulators, RTC and battery-charger under the corresponding menus. config MFD_MAX14577 tristate "Maxim Semiconductor MAX14577/77836 MUIC + Charger Support" depends on I2C select MFD_CORE select REGMAP_I2C select REGMAP_IRQ select IRQ_DOMAIN help Say yes here to add support for Maxim Semiconductor MAX14577 and MAX77836 Micro-USB ICs with battery charger. This driver provides common support for accessing the device; additional drivers must be enabled in order to use the functionality of the device. config MFD_MAX77620 bool "Maxim Semiconductor MAX77620 and MAX20024 PMIC Support" depends on I2C=y depends on OF || COMPILE_TEST select MFD_CORE select REGMAP_I2C select REGMAP_IRQ select IRQ_DOMAIN help Say yes here to add support for Maxim Semiconductor MAX77620 and MAX20024 which are Power Management IC with General purpose pins, RTC, regulators, clock generator, watchdog etc. This driver provides common support for accessing the device; additional drivers must be enabled in order to use the functionality of the device. config MFD_MAX77650 tristate "Maxim MAX77650/77651 PMIC Support" depends on I2C depends on OF || COMPILE_TEST select MFD_CORE select REGMAP_I2C select REGMAP_IRQ help Say Y here to add support for Maxim Semiconductor MAX77650 and MAX77651 Power Management ICs. This is the core multifunction driver for interacting with the device. The module name is 'max77650'. Additional drivers can be enabled in order to use the following functionalities of the device: GPIO, regulator, charger, LED, onkey. config MFD_MAX77686 tristate "Maxim Semiconductor MAX77686/802 PMIC Support" depends on I2C depends on OF || COMPILE_TEST select MFD_CORE select REGMAP_I2C select REGMAP_IRQ select IRQ_DOMAIN help Say yes here to add support for Maxim Semiconductor MAX77686 and MAX77802 which are Power Management IC with an RTC on chip. This driver provides common support for accessing the device; additional drivers must be enabled in order to use the functionality of the device. config MFD_MAX77693 tristate "Maxim Semiconductor MAX77693 PMIC Support" depends on I2C select MFD_CORE select REGMAP_I2C select REGMAP_IRQ help Say yes here to add support for Maxim Semiconductor MAX77693. This is a companion Power Management IC with Flash, Haptic, Charger, and MUIC(Micro USB Interface Controller) controls on chip. This driver provides common support for accessing the device; additional drivers must be enabled in order to use the functionality of the device. config MFD_MAX77843 bool "Maxim Semiconductor MAX77843 PMIC Support" depends on I2C=y select MFD_CORE select REGMAP_I2C select REGMAP_IRQ help Say yes here to add support for Maxim Semiconductor MAX77843. This is companion Power Management IC with LEDs, Haptic, Charger, Fuel Gauge, MUIC(Micro USB Interface Controller) controls on chip. This driver provides common support for accessing the device; additional drivers must be enabled in order to use the functionality of the device. config MFD_MAX8907 tristate "Maxim Semiconductor MAX8907 PMIC Support" select MFD_CORE depends on I2C select REGMAP_I2C select REGMAP_IRQ help Say yes here to add support for Maxim Semiconductor MAX8907. This is a Power Management IC. This driver provides common support for accessing the device; additional drivers must be enabled in order to use the functionality of the device. config MFD_MAX8925 bool "Maxim Semiconductor MAX8925 PMIC Support" depends on I2C=y select MFD_CORE help Say yes here to add support for Maxim Semiconductor MAX8925. This is a Power Management IC. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. config MFD_MAX8997 bool "Maxim Semiconductor MAX8997/8966 PMIC Support" depends on I2C=y select MFD_CORE select IRQ_DOMAIN help Say yes here to add support for Maxim Semiconductor MAX8997/8966. This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic, MUIC controls on chip. This driver provides common support for accessing the device; additional drivers must be enabled in order to use the functionality of the device. config MFD_MAX8998 bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support" depends on I2C=y select MFD_CORE select IRQ_DOMAIN help Say yes here to add support for Maxim Semiconductor MAX8998 and National Semiconductor LP3974. This is a Power Management IC. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. config MFD_MT6360 tristate "Mediatek MT6360 SubPMIC" select MFD_CORE select REGMAP_I2C select REGMAP_IRQ select CRC8 depends on I2C help Say Y here to enable MT6360 PMU/PMIC/LDO functional support. PMU part includes Charger, Flashlight, RGB LED PMIC part includes 2-channel BUCKs and 2-channel LDOs LDO part includes 4-channel LDOs config MFD_MT6397 tristate "MediaTek MT6397 PMIC Support" select MFD_CORE select IRQ_DOMAIN help Say yes here to add support for MediaTek MT6397 PMIC. This is a Power Management IC. This driver provides common support for accessing the device; additional drivers must be enabled in order to use the functionality of the device. config MFD_MENF21BMC tristate "MEN 14F021P00 Board Management Controller Support" depends on I2C select MFD_CORE help Say yes here to add support for the MEN 14F021P00 BMC which is a Board Management Controller connected to the I2C bus. The device supports multiple sub-devices like LED, HWMON and WDT. This driver provides common support for accessing the devices; additional drivers must be enabled in order to use the functionality of the BMC device. This driver can also be built as a module. If so the module will be called menf21bmc. config EZX_PCAP bool "Motorola EZXPCAP Support" depends on SPI_MASTER help This enables the PCAP ASIC present on EZX Phones. This is needed for MMC, TouchScreen, Sound, USB, etc.. config MFD_CPCAP tristate "Support for Motorola CPCAP" depends on SPI depends on OF || COMPILE_TEST select MFD_CORE select REGMAP_SPI select REGMAP_IRQ help Say yes here if you want to include driver for CPCAP. It is used on many Motorola phones and tablets as a PMIC. At least Motorola Droid 4 is known to use CPCAP. config MFD_VIPERBOARD tristate "Nano River Technologies Viperboard" select MFD_CORE depends on USB default n help Say yes here if you want support for Nano River Technologies Viperboard. There are mfd cell drivers available for i2c master, adc and both gpios found on the board. The spi part does not yet have a driver. You need to select the mfd cell drivers separately. The drivers do not support all features the board exposes. config MFD_NTXEC tristate "Netronix embedded controller (EC)" depends on OF || COMPILE_TEST depends on I2C select REGMAP_I2C select MFD_CORE help Say yes here if you want to support the embedded controller found in certain e-book readers designed by the original design manufacturer Netronix. config MFD_RETU tristate "Nokia Retu and Tahvo multi-function device" select MFD_CORE depends on I2C select REGMAP_IRQ help Retu and Tahvo are a multi-function devices found on Nokia Internet Tablets (770, N800 and N810). config MFD_PCF50633 tristate "NXP PCF50633" depends on I2C select REGMAP_I2C help Say yes here if you have NXP PCF50633 chip on your board. This core driver provides register access and IRQ handling facilities, and registers devices for the various functions so that function-specific drivers can bind to them. config PCF50633_ADC tristate "NXP PCF50633 ADC" depends on MFD_PCF50633 help Say yes here if you want to include support for ADC in the NXP PCF50633 chip. config PCF50633_GPIO tristate "NXP PCF50633 GPIO" depends on MFD_PCF50633 help Say yes here if you want to include support GPIO for pins on the PCF50633 chip. config UCB1400_CORE tristate "Philips UCB1400 Core driver" depends on AC97_BUS depends on GPIOLIB help This enables support for the Philips UCB1400 core functions. The UCB1400 is an AC97 audio codec. To compile this driver as a module, choose M here: the module will be called ucb1400_core. config MFD_PM8XXX tristate "Qualcomm PM8xxx PMIC chips driver" depends on (ARM || HEXAGON || COMPILE_TEST) select IRQ_DOMAIN_HIERARCHY select MFD_CORE select REGMAP help If you say yes to this option, support will be included for the built-in PM8xxx PMIC chips. This is required if your board has a PM8xxx and uses its features, such as: MPPs, GPIOs, regulators, interrupts, and PWM. Say M here if you want to include support for PM8xxx chips as a module. This will build a module called "pm8xxx-core". config MFD_QCOM_RPM tristate "Qualcomm Resource Power Manager (RPM)" depends on ARCH_QCOM && OF help If you say yes to this option, support will be included for the Resource Power Manager system found in the Qualcomm 8660, 8960 and 8064 based devices. This is required to access many regulators, clocks and bus frequencies controlled by the RPM on these devices. Say M here if you want to include support for the Qualcomm RPM as a module. This will build a module called "qcom_rpm". config MFD_SPMI_PMIC tristate "Qualcomm SPMI PMICs" depends on ARCH_QCOM || COMPILE_TEST depends on OF depends on SPMI select REGMAP_SPMI help This enables support for the Qualcomm SPMI PMICs. These PMICs are currently used with the Snapdragon 800 series of SoCs. Note, that this will only be useful paired with descriptions of the independent functions as children nodes in the device tree. Say M here if you want to include support for the SPMI PMIC series as a module. The module will be called "qcom-spmi-pmic". config MFD_RDC321X tristate "RDC R-321x southbridge" select MFD_CORE depends on PCI help Say yes here if you want to have support for the RDC R-321x SoC southbridge which provides access to GPIOs and Watchdog using the southbridge PCI device configuration space. config MFD_RT4831 tristate "Richtek RT4831 four channel WLED and Display Bias Voltage" depends on I2C select MFD_CORE select REGMAP_I2C help This enables support for the Richtek RT4831 that includes 4 channel WLED driving and Display Bias Voltage. It's commonly used to provide power to the LCD display and LCD backlight. config MFD_RT5033 tristate "Richtek RT5033 Power Management IC" depends on I2C select MFD_CORE select REGMAP_I2C select REGMAP_IRQ help This driver provides for the Richtek RT5033 Power Management IC, which includes the I2C driver and the Core APIs. This driver provides common support for accessing the device. The device supports multiple sub-devices like charger, fuel gauge, flash LED, current source, LDO and Buck. config MFD_RC5T583 bool "Ricoh RC5T583 Power Management system device" depends on I2C=y select MFD_CORE select REGMAP_I2C help Select this option to get support for the RICOH583 Power Management system device. This driver provides common support for accessing the device through i2c interface. The device supports multiple sub-devices like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey. Additional drivers must be enabled in order to use the different functionality of the device. config MFD_RK808 tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power Management Chip" depends on I2C && OF select MFD_CORE select REGMAP_I2C select REGMAP_IRQ help If you say yes here you get support for the RK805, RK808, RK809, RK817 and RK818 Power Management chips. This driver provides common support for accessing the device through I2C interface. The device supports multiple sub-devices including interrupts, RTC, LDO & DCDC regulators, and onkey. config MFD_RN5T618 tristate "Ricoh RN5T567/618 PMIC" depends on I2C depends on OF select MFD_CORE select REGMAP_I2C select REGMAP_IRQ help Say yes here to add support for the Ricoh RN5T567, RN5T618, RC5T619 PMIC. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. config MFD_SEC_CORE tristate "Samsung Electronics PMIC Series Support" depends on I2C=y depends on OF || COMPILE_TEST select MFD_CORE select REGMAP_I2C select REGMAP_IRQ help Support for the Samsung Electronics PMIC devices coming usually along with Samsung Exynos SoC chipset. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device To compile this driver as a module, choose M here: the module will be called sec-core. Have in mind that important core drivers (like regulators) depend on this driver so building this as a module might require proper initial ramdisk or might not boot up as well in certain scenarios. config MFD_SI476X_CORE tristate "Silicon Laboratories 4761/64/68 AM/FM radio." depends on I2C select MFD_CORE select REGMAP_I2C help This is the core driver for the SI476x series of AM/FM radio. This MFD driver connects the radio-si476x V4L2 module and the si476x audio codec. To compile this driver as a module, choose M here: the module will be called si476x-core. config MFD_SIMPLE_MFD_I2C tristate depends on I2C select REGMAP_I2C help This driver creates a single register map with the intention for it to be shared by all sub-devices. Once the register map has been successfully initialised, any sub-devices represented by child nodes in Device Tree will be subsequently registered. config MFD_SL28CPLD tristate "Kontron sl28cpld Board Management Controller" depends on I2C depends on ARCH_LAYERSCAPE || COMPILE_TEST select MFD_SIMPLE_MFD_I2C help Say yes here to enable support for the Kontron sl28cpld board management controller. It can be found on the following boards: * SMARC-sAL28 config MFD_SM501 tristate "Silicon Motion SM501" depends on HAS_DMA help This is the core driver for the Silicon Motion SM501 multimedia companion chip. This device is a multifunction device which may provide numerous interfaces including USB host controller, USB gadget, asynchronous serial ports, audio functions, and a dual display video interface. The device may be connected by PCI or local bus with varying functions enabled. config MFD_SM501_GPIO bool "Export GPIO via GPIO layer" depends on MFD_SM501 && GPIOLIB help This option uses the gpio library layer to export the 64 GPIO lines on the SM501. The platform data is used to supply the base number for the first GPIO line to register. config MFD_SKY81452 tristate "Skyworks Solutions SKY81452" select MFD_CORE select REGMAP_I2C depends on I2C help This is the core driver for the Skyworks SKY81452 backlight and voltage regulator device. This driver can also be built as a module. If so, the module will be called sky81452. config MFD_SC27XX_PMIC tristate "Spreadtrum SC27xx PMICs" depends on ARCH_SPRD || COMPILE_TEST depends on SPI_MASTER select MFD_CORE select REGMAP_SPI select REGMAP_IRQ help This enables support for the Spreadtrum SC27xx PMICs with SPI interface. The SC27xx series PMICs integrate power management, audio codec, battery management and user interface support function (such as RTC, Typec, indicator and so on) in a single chip. This driver provides common support for accessing the SC27xx PMICs, and it also adds the irq_chip parts for handling the PMIC chip events. config ABX500_CORE bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions" depends on ARCH_U8500 || COMPILE_TEST default y if ARCH_U8500 help Say yes here if you have the ABX500 Mixed Signal IC family chips. This core driver expose register access functions. Functionality specific drivers using these functions can remain unchanged when IC changes. Binding of the functions to actual register access is done by the IC core driver. config AB8500_CORE bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" depends on ABX500_CORE && MFD_DB8500_PRCMU select POWER_SUPPLY select MFD_CORE select IRQ_DOMAIN help Select this option to enable access to AB8500 power management chip. This connects to U8500 either on the SSP/SPI bus (deprecated since hardware version v1.0) or the I2C bus via PRCMU. It also adds the irq_chip parts for handling the Mixed Signal chip events. This chip embeds various other multimedia functionalities as well. config AB8500_DEBUG bool "Enable debug info via debugfs" depends on AB8500_GPADC && DEBUG_FS default y if DEBUG_FS help Select this option if you want debug information using the debug filesystem, debugfs. config MFD_DB8500_PRCMU bool "ST-Ericsson DB8500 Power Reset Control Management Unit" depends on UX500_SOC_DB8500 select MFD_CORE help Select this option to enable support for the DB8500 Power Reset and Control Management Unit. This is basically an autonomous system controller running an XP70 microprocessor, which is accessed through a register map. config MFD_STMPE bool "STMicroelectronics STMPE" depends on (I2C=y || SPI_MASTER=y) depends on OF select MFD_CORE help Support for the STMPE family of I/O Expanders from STMicroelectronics. Currently supported devices are: STMPE811: GPIO, Touchscreen, ADC STMPE1601: GPIO, Keypad STMPE1801: GPIO, Keypad STMPE2401: GPIO, Keypad STMPE2403: GPIO, Keypad This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. Currently available sub drivers are: GPIO: stmpe-gpio Keypad: stmpe-keypad Touchscreen: stmpe-ts ADC: stmpe-adc menu "STMicroelectronics STMPE Interface Drivers" depends on MFD_STMPE config STMPE_I2C bool "STMicroelectronics STMPE I2C Interface" depends on I2C=y default y help This is used to enable I2C interface of STMPE config STMPE_SPI bool "STMicroelectronics STMPE SPI Interface" depends on SPI_MASTER help This is used to enable SPI interface of STMPE endmenu config MFD_STA2X11 bool "STMicroelectronics STA2X11" depends on STA2X11 select MFD_CORE select REGMAP_MMIO config MFD_SUN6I_PRCM bool "Allwinner A31 PRCM controller" depends on ARCH_SUNXI || COMPILE_TEST select MFD_CORE help Support for the PRCM (Power/Reset/Clock Management) unit available in A31 SoC. config MFD_SYSCON bool "System Controller Register R/W Based on Regmap" select REGMAP_MMIO help Select this option to enable accessing system control registers via regmap. config MFD_DAVINCI_VOICECODEC tristate select MFD_CORE select REGMAP_MMIO config MFD_TI_AM335X_TSCADC tristate "TI ADC / Touch Screen chip support" select MFD_CORE select REGMAP select REGMAP_MMIO help If you say yes here you get support for Texas Instruments series of Touch Screen /ADC chips. To compile this driver as a module, choose M here: the module will be called ti_am335x_tscadc. config MFD_DM355EVM_MSP bool "TI DaVinci DM355 EVM microcontroller" depends on I2C=y && MACH_DAVINCI_DM355_EVM help This driver supports the MSP430 microcontroller used on these boards. MSP430 firmware manages resets and power sequencing, inputs from buttons and the IR remote, LEDs, an RTC, and more. config MFD_LP3943 tristate "TI/National Semiconductor LP3943 MFD Driver" depends on I2C select MFD_CORE select REGMAP_I2C help Support for the TI/National Semiconductor LP3943. This driver consists of GPIO and PWM drivers. With these functionalities, it can be used for LED string control or general usage such like a GPIO controller and a PWM controller. config MFD_LP8788 bool "TI LP8788 Power Management Unit Driver" depends on I2C=y select MFD_CORE select REGMAP_I2C select IRQ_DOMAIN help TI LP8788 PMU supports regulators, battery charger, RTC, ADC, backlight driver and current sinks. config MFD_TI_LMU tristate "TI Lighting Management Unit driver" depends on I2C select MFD_CORE select REGMAP_I2C help Say yes here to enable support for TI LMU chips. TI LMU MFD supports LM3532, LM3631, LM3632, LM3633, LM3695 and LM36274. It consists of backlight, LED and regulator driver. It provides consistent device controls for lighting functions. config MFD_OMAP_USB_HOST bool "TI OMAP USBHS core and TLL driver" depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3 depends on COMMON_CLK default y help This is the core driver for the OAMP EHCI and OHCI drivers. This MFD driver does the required setup functionalities for OMAP USB Host drivers. config MFD_PALMAS bool "TI Palmas series chips" select MFD_CORE select REGMAP_I2C select REGMAP_IRQ depends on I2C=y help If you say yes here you get support for the Palmas series of PMIC chips from Texas Instruments. config TPS6105X tristate "TI TPS61050/61052 Boost Converters" depends on I2C select REGMAP_I2C select REGULATOR select MFD_CORE select REGULATOR_FIXED_VOLTAGE help This option enables a driver for the TP61050/TPS61052 high-power "white LED driver". This boost converter is sometimes used for other things than white LEDs, and also contains a GPIO pin. config TPS65010 tristate "TI TPS6501x Power Management chips" depends on I2C && GPIOLIB default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK help If you say yes here you get support for the TPS6501x series of Power Management chips. These include voltage regulators, lithium ion/polymer battery charging, and other features that are often used in portable devices like cell phones and cameras. This driver can also be built as a module. If so, the module will be called tps65010. config TPS6507X tristate "TI TPS6507x Power Management / Touch Screen chips" select MFD_CORE depends on I2C help If you say yes here you get support for the TPS6507x series of Power Management / Touch Screen chips. These include voltage regulators, lithium ion/polymer battery charging, touch screen and other features that are often used in portable devices. This driver can also be built as a module. If so, the module will be called tps6507x. config MFD_TPS65086 tristate "TI TPS65086 Power Management Integrated Chips (PMICs)" select MFD_CORE select REGMAP select REGMAP_IRQ select REGMAP_I2C depends on I2C help If you say yes here you get support for the TPS65086 series of Power Management chips. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. config TPS65911_COMPARATOR tristate config MFD_TPS65090 bool "TI TPS65090 Power Management chips" depends on I2C=y select MFD_CORE select REGMAP_I2C select REGMAP_IRQ help If you say yes here you get support for the TPS65090 series of Power Management chips. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. config MFD_TPS65217 tristate "TI TPS65217 Power Management / White LED chips" depends on I2C && OF select MFD_CORE select REGMAP_I2C select IRQ_DOMAIN help If you say yes here you get support for the TPS65217 series of Power Management / White LED chips. These include voltage regulators, lithium ion/polymer battery charger, wled and other features that are often used in portable devices. This driver can also be built as a module. If so, the module will be called tps65217. config MFD_TI_LP873X tristate "TI LP873X Power Management IC" depends on I2C select MFD_CORE select REGMAP_I2C help If you say yes here then you get support for the LP873X series of Power Management Integrated Circuits (PMIC). These include voltage regulators, thermal protection, configurable General Purpose Outputs (GPO) that are used in portable devices. This driver can also be built as a module. If so, the module will be called lp873x. config MFD_TI_LP87565 tristate "TI LP87565 Power Management IC" depends on I2C && OF select MFD_CORE select REGMAP_I2C help If you say yes here then you get support for the LP87565 series of Power Management Integrated Circuits (PMIC). These include voltage regulators, thermal protection, configurable General Purpose Outputs (GPO) that are used in portable devices. This driver can also be built as a module. If so, the module will be called lp87565. config MFD_TPS65218 tristate "TI TPS65218 Power Management chips" depends on I2C && OF select MFD_CORE select REGMAP_I2C select REGMAP_IRQ help If you say yes here you get support for the TPS65218 series of Power Management chips. These include voltage regulators, gpio and other features that are often used in portable devices. This driver can also be built as a module. If so, the module will be called tps65218. config MFD_TPS6586X bool "TI TPS6586x Power Management chips" depends on I2C=y select MFD_CORE select REGMAP_I2C help If you say yes here you get support for the TPS6586X series of Power Management chips. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. This driver can also be built as a module. If so, the module will be called tps6586x. config MFD_TPS65910 bool "TI TPS65910 Power Management chip" depends on I2C=y depends on GPIOLIB || COMPILE_TEST select MFD_CORE select REGMAP_I2C select REGMAP_IRQ select IRQ_DOMAIN help if you say yes here you get support for the TPS65910 series of Power Management chips. config MFD_TPS65912 tristate select MFD_CORE select REGMAP select REGMAP_IRQ config MFD_TPS65912_I2C tristate "TI TPS65912 Power Management chip with I2C" select MFD_TPS65912 select REGMAP_I2C depends on I2C help If you say yes here you get support for the TPS65912 series of PM chips with I2C interface. config MFD_TPS65912_SPI tristate "TI TPS65912 Power Management chip with SPI" select MFD_TPS65912 select REGMAP_SPI depends on SPI_MASTER help If you say yes here you get support for the TPS65912 series of PM chips with SPI interface. config MFD_TPS80031 bool "TI TPS80031/TPS80032 Power Management chips" depends on I2C=y select MFD_CORE select REGMAP_I2C select REGMAP_IRQ help If you say yes here you get support for the Texas Instruments TPS80031/ TPS80032 Fully Integrated Power Management with Power Path and Battery Charger. The device provides five configurable step-down converters, 11 general purpose LDOs, USB OTG Module, ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with Power Path from USB, 32K clock generator. config TWL4030_CORE bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support" depends on I2C=y select IRQ_DOMAIN select REGMAP_I2C help Say yes here if you have TWL4030 / TWL6030 family chip on your board. This core driver provides register access and IRQ handling facilities, and registers devices for the various functions so that function-specific drivers can bind to them. These multi-function chips are found on many OMAP2 and OMAP3 boards, providing power management, RTC, GPIO, keypad, a high speed USB OTG transceiver, an audio codec (on most versions) and many other features. config TWL4030_POWER bool "TI TWL4030 power resources" depends on TWL4030_CORE && ARM help Say yes here if you want to use the power resources on the TWL4030 family chips. Most of these resources are regulators, which have a separate driver; some are control signals, such as clock request handshaking. This driver uses board-specific data to initialize the resources and load scripts controlling which resources are switched off/on or reset when a sleep, wakeup or warm reset event occurs. config MFD_TWL4030_AUDIO bool "TI TWL4030 Audio" depends on TWL4030_CORE select MFD_CORE default n config TWL6040_CORE bool "TI TWL6040 audio codec" depends on I2C=y select MFD_CORE select REGMAP_I2C select REGMAP_IRQ default n help Say yes here if you want support for Texas Instruments TWL6040 audio codec. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device (audio, vibra). config MENELAUS bool "TI TWL92330/Menelaus PM chip" depends on I2C=y && ARCH_OMAP2 help If you say yes here you get support for the Texas Instruments TWL92330/Menelaus Power Management chip. This include voltage regulators, Dual slot memory card transceivers, real-time clock and other features that are often used in portable devices like cell phones and PDAs. config MFD_WL1273_CORE tristate "TI WL1273 FM radio" depends on I2C select MFD_CORE default n help This is the core driver for the TI WL1273 FM radio. This MFD driver connects the radio-wl1273 V4L2 module and the wl1273 audio codec. config MFD_LM3533 tristate "TI/National Semiconductor LM3533 Lighting Power chip" depends on I2C select MFD_CORE select REGMAP_I2C help Say yes here to enable support for National Semiconductor / TI LM3533 Lighting Power chips. This driver provides common support for accessing the device; additional drivers must be enabled in order to use the LED, backlight or ambient-light-sensor functionality of the device. config MFD_TIMBERDALE tristate "Timberdale FPGA" select MFD_CORE depends on PCI && GPIOLIB && (X86_32 || COMPILE_TEST) help This is the core driver for the timberdale FPGA. This device is a multifunction device which exposes numerous platform devices. The timberdale FPGA can be found on the Intel Atom development board for in-vehicle infontainment, called Russellville. config MFD_TC3589X bool "Toshiba TC35892 and variants" depends on I2C=y depends on OF select MFD_CORE help Support for the Toshiba TC35892 and variants I/O Expander. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. config MFD_TMIO bool default n config MFD_T7L66XB bool "Toshiba T7L66XB" depends on ARM && HAVE_CLK select MFD_CORE select MFD_TMIO help Support for Toshiba Mobile IO Controller T7L66XB config MFD_TC6387XB bool "Toshiba TC6387XB" depends on ARM && HAVE_CLK select MFD_CORE select MFD_TMIO help Support for Toshiba Mobile IO Controller TC6387XB config MFD_TC6393XB bool "Toshiba TC6393XB" depends on ARM && HAVE_CLK select GPIOLIB select MFD_CORE select MFD_TMIO help Support for Toshiba Mobile IO Controller TC6393XB config MFD_TQMX86 tristate "TQ-Systems IO controller TQMX86" select MFD_CORE help Say yes here to enable support for various functions of the TQ-Systems IO controller and watchdog device, found on their ComExpress CPU modules. config MFD_VX855 tristate "VIA VX855/VX875 integrated south bridge" depends on PCI select MFD_CORE help Say yes here to enable support for various functions of the VIA VX855/VX875 south bridge. You will need to enable the vx855_spi and/or vx855_gpio drivers for this to do anything useful. config MFD_LOCHNAGAR bool "Cirrus Logic Lochnagar Audio Development Board" select MFD_CORE select REGMAP_I2C depends on I2C=y && OF help Support for Cirrus Logic Lochnagar audio development board. config MFD_ARIZONA select REGMAP select REGMAP_IRQ select MFD_CORE tristate config MFD_ARIZONA_I2C tristate "Cirrus Logic/Wolfson Microelectronics Arizona platform with I2C" select MFD_ARIZONA select REGMAP_I2C depends on I2C help Support for the Cirrus Logic/Wolfson Microelectronics Arizona platform audio SoC core functionality controlled via I2C. config MFD_ARIZONA_SPI tristate "Cirrus Logic/Wolfson Microelectronics Arizona platform with SPI" select MFD_ARIZONA select REGMAP_SPI depends on SPI_MASTER help Support for the Cirrus Logic/Wolfson Microelectronics Arizona platform audio SoC core functionality controlled via SPI. config MFD_CS47L24 bool "Cirrus Logic CS47L24 and WM1831" depends on MFD_ARIZONA help Support for Cirrus Logic CS47L24 and WM1831 low power audio SoC config MFD_WM5102 bool "Wolfson Microelectronics WM5102" depends on MFD_ARIZONA help Support for Wolfson Microelectronics WM5102 low power audio SoC config MFD_WM5110 bool "Wolfson Microelectronics WM5110 and WM8280/WM8281" depends on MFD_ARIZONA help Support for Wolfson Microelectronics WM5110 and WM8280/WM8281 low power audio SoC config MFD_WM8997 bool "Wolfson Microelectronics WM8997" depends on MFD_ARIZONA help Support for Wolfson Microelectronics WM8997 low power audio SoC config MFD_WM8998 bool "Wolfson Microelectronics WM8998" depends on MFD_ARIZONA help Support for Wolfson Microelectronics WM8998 low power audio SoC config MFD_WM8400 bool "Wolfson Microelectronics WM8400" select MFD_CORE depends on I2C=y select REGMAP_I2C help Support for the Wolfson Microelecronics WM8400 PMIC and audio CODEC. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. config MFD_WM831X bool config MFD_WM831X_I2C bool "Wolfson Microelectronics WM831x/2x PMICs with I2C" select MFD_CORE select MFD_WM831X select REGMAP_I2C select IRQ_DOMAIN depends on I2C=y help Support for the Wolfson Microelecronics WM831x and WM832x PMICs when controlled using I2C. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. config MFD_WM831X_SPI bool "Wolfson Microelectronics WM831x/2x PMICs with SPI" select MFD_CORE select MFD_WM831X select REGMAP_SPI select IRQ_DOMAIN depends on SPI_MASTER help Support for the Wolfson Microelecronics WM831x and WM832x PMICs when controlled using SPI. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. config MFD_WM8350 bool config MFD_WM8350_I2C bool "Wolfson Microelectronics WM8350 with I2C" select MFD_WM8350 select REGMAP_I2C depends on I2C=y help The WM8350 is an integrated audio and power management subsystem with watchdog and RTC functionality for embedded systems. This option enables core support for the WM8350 with I2C as the control interface. Additional options must be selected to enable support for the functionality of the chip. config MFD_WM8994 tristate "Wolfson Microelectronics WM8994" select MFD_CORE select REGMAP_I2C select REGMAP_IRQ depends on I2C help The WM8994 is a highly integrated hi-fi CODEC designed for smartphone applications. As well as audio functionality it has on board GPIO and regulator functionality which is supported via the relevant subsystems. This driver provides core support for the WM8994, in order to use the actual functionality of the device other drivers must be enabled. config MFD_WM97xx tristate "Wolfson Microelectronics WM97xx" select MFD_CORE select REGMAP_AC97 select AC97_BUS_COMPAT depends on AC97_BUS_NEW help The WM9705, WM9712 and WM9713 is a highly integrated hi-fi CODEC designed for smartphone applications. As well as audio functionality it has on board GPIO and a touchscreen functionality which is supported via the relevant subsystems. This driver provides core support for the WM97xx, in order to use the actual functionality of the device other drivers must be enabled. config MFD_STW481X tristate "Support for ST Microelectronics STw481x" depends on I2C && (ARCH_NOMADIK || COMPILE_TEST) select REGMAP_I2C select MFD_CORE help Select this option to enable the STw481x chip driver used in various ST Microelectronics and ST-Ericsson embedded Nomadik series. config MFD_ROHM_BD718XX tristate "ROHM BD71837 Power Management IC" depends on I2C=y depends on OF select REGMAP_I2C select REGMAP_IRQ select MFD_CORE help Select this option to get support for the ROHM BD71837 Power Management ICs. BD71837 is designed to power processors like NXP i.MX8. It contains 8 BUCK outputs and 7 LDOs, voltage monitoring and emergency shut down as well as 32,768KHz clock output. config MFD_ROHM_BD70528 tristate "ROHM BD70528 Power Management IC" depends on I2C=y depends on OF select REGMAP_I2C select REGMAP_IRQ select MFD_CORE help Select this option to get support for the ROHM BD70528 Power Management IC. BD71837 is general purpose single-chip power management IC for battery-powered portable devices. It contains 3 ultra-low current consumption buck converters, 3 LDOs and 2 LED drivers. Also included are 4 GPIOs, a real-time clock (RTC), a 32kHz crystal oscillator, high-accuracy VREF for use with an external ADC, 10 bits SAR ADC for battery temperature monitor and 1S battery charger. config MFD_ROHM_BD71828 tristate "ROHM BD71828 and BD71815 Power Management IC" depends on I2C=y depends on OF select REGMAP_I2C select REGMAP_IRQ select MFD_CORE help Select this option to get support for the ROHM BD71828 and BD71815 Power Management ICs. BD71828GW and BD71815AGW are single-chip power management ICs mainly for battery-powered portable devices. The BD71828 integrates 7 buck converters and 7 LDOs. The BD71815 has 5 bucks, 7 LDOs, and a boost for driving LEDs. Both ICs provide also a single-cell linear charger, a Coulomb counter, a real-time clock (RTC), GPIOs and a 32.768 kHz clock gate. config MFD_ROHM_BD957XMUF tristate "ROHM BD9576MUF and BD9573MUF Power Management ICs" depends on I2C=y depends on OF select REGMAP_I2C select MFD_CORE help Select this option to get support for the ROHM BD9576MUF and BD9573MUF Power Management ICs. BD9576 and BD9573 are primarily designed to be used to power R-Car series processors. config MFD_STM32_LPTIMER tristate "Support for STM32 Low-Power Timer" depends on (ARCH_STM32 && OF) || COMPILE_TEST select MFD_CORE select REGMAP select REGMAP_MMIO help Select this option to enable STM32 Low-Power Timer driver used for PWM, IIO Trigger, IIO Encoder and Counter. Shared resources are also dealt with here. To compile this driver as a module, choose M here: the module will be called stm32-lptimer. config MFD_STM32_TIMERS tristate "Support for STM32 Timers" depends on (ARCH_STM32 && OF) || COMPILE_TEST select MFD_CORE select REGMAP select REGMAP_MMIO help Select this option to enable STM32 timers driver used for PWM and IIO Timer. This driver allow to share the registers between the others drivers. config MFD_STPMIC1 tristate "Support for STPMIC1 PMIC" depends on (I2C=y && OF) select REGMAP_I2C select REGMAP_IRQ select MFD_CORE help Support for ST Microelectronics STPMIC1 PMIC. STPMIC1 has power on key, watchdog and regulator functionalities which are supported via the relevant subsystems. This driver provides core support for the STPMIC1. In order to use the actual functionality of the device other drivers must be enabled. To compile this driver as a module, choose M here: the module will be called stpmic1. config MFD_STMFX tristate "Support for STMicroelectronics Multi-Function eXpander (STMFX)" depends on I2C depends on OF || COMPILE_TEST select MFD_CORE select REGMAP_I2C help Support for the STMicroelectronics Multi-Function eXpander. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. config MFD_WCD934X tristate "Support for WCD9340/WCD9341 Codec" depends on SLIMBUS select REGMAP select REGMAP_SLIMBUS select REGMAP_IRQ select MFD_CORE help Support for the Qualcomm WCD9340/WCD9341 Codec. This driver provides common support WCD934x audio codec and its associated Pin Controller, Soundwire Controller and Audio codec. config MFD_ATC260X tristate select MFD_CORE select REGMAP select REGMAP_IRQ config MFD_ATC260X_I2C tristate "Actions Semi ATC260x PMICs with I2C" select MFD_ATC260X select REGMAP_I2C depends on I2C help Support for the Actions Semi ATC260x PMICs controlled via I2C. This driver provides common support for accessing the ATC2603C and ATC2609A chip variants, additional drivers must be enabled in order to use the functionality of the device. config MFD_KHADAS_MCU tristate "Support for Khadas System control Microcontroller" depends on I2C depends on ARCH_MESON || ARCH_ROCKCHIP || COMPILE_TEST select MFD_CORE select REGMAP_I2C help Support for the Khadas System control Microcontroller interface present on their VIM and Edge boards. This Microcontroller is present on the Khadas VIM1, VIM2, VIM3 and Edge boards. It provides multiple boot control features like password check, power-on options, power-off control and system FAN control on recent boards. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. config MFD_ACER_A500_EC tristate "Support for Acer Iconia Tab A500 Embedded Controller" depends on I2C depends on (ARCH_TEGRA_2x_SOC && OF) || COMPILE_TEST select MFD_CORE select REGMAP help Support for Embedded Controller found on Acer Iconia Tab A500. The controller itself is ENE KB930, it is running firmware customized for the specific needs of the Acer A500 hardware. config MFD_QCOM_PM8008 tristate "QCOM PM8008 Power Management IC" depends on I2C && OF select REGMAP_I2C select REGMAP_IRQ help Select this option to get support for the Qualcomm Technologies, Inc. PM8008 PMIC chip. PM8008 is a dedicated camera PMIC that integrates all the necessary power management, housekeeping, and interface support functions into a single IC. This driver provides common support for accessing the device by instantiating all the child nodes under it in the device tree. Additional drivers must be enabled in order to use the functionality of the device. menu "Multimedia Capabilities Port drivers" depends on ARCH_SA1100 config MCP tristate # Interface drivers config MCP_SA11X0 tristate "Support SA11x0 MCP interface" depends on ARCH_SA1100 select MCP # Chip drivers config MCP_UCB1200 tristate "Support for UCB1200 / UCB1300" depends on MCP_SA11X0 select MCP config MCP_UCB1200_TS tristate "Touchscreen interface support" depends on MCP_UCB1200 && INPUT endmenu config MFD_VEXPRESS_SYSREG tristate "Versatile Express System Registers" depends on VEXPRESS_CONFIG && GPIOLIB default y select GPIO_GENERIC_PLATFORM select MFD_CORE select MFD_SYSCON help System Registers are the platform configuration block on the ARM Ltd. Versatile Express board. config RAVE_SP_CORE tristate "RAVE SP MCU core driver" depends on SERIAL_DEV_BUS select CRC_CCITT help Select this to get support for the Supervisory Processor device found on several devices in RAVE line of hardware. config SGI_MFD_IOC3 bool "SGI IOC3 core driver" depends on PCI && MIPS && 64BIT select MFD_CORE help This option enables basic support for the SGI IOC3-based controller cards. This option does not enable any specific functions on such a card, but provides necessary infrastructure for other drivers to utilize. If you have an SGI Origin, Octane, or a PCI IOC3 card, then say Y. Otherwise say N. config MFD_INTEL_M10_BMC tristate "Intel MAX 10 Board Management Controller" depends on SPI_MASTER select REGMAP_SPI_AVMM select MFD_CORE help Support for the Intel MAX 10 board management controller using the SPI interface. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. config MFD_RSMU_I2C tristate "Renesas Synchronization Management Unit with I2C" depends on I2C && OF select MFD_CORE select REGMAP_I2C help Support for the Renesas Synchronization Management Unit, such as Clockmatrix and 82P33XXX series. This option supports I2C as the control interface. This driver provides common support for accessing the device. Additional drivers must be enabled in order to use the functionality of the device. config MFD_RSMU_SPI tristate "Renesas Synchronization Management Unit with SPI" depends on SPI && OF select MFD_CORE select REGMAP_SPI help Support for the Renesas Synchronization Management Unit, such as Clockmatrix and 82P33XXX series. This option supports SPI as the control interface. This driver provides common support for accessing the device. Additional drivers must be enabled in order to use the functionality of the device. endmenu endif |