Qualcomm's USB HSIC PHY

PROPERTIES

- compatible:
    Usage: required
    Value type: <string>
    Definition: Should contain "qcom,usb-hsic-phy" and more specifically one of the
		following:

			"qcom,usb-hsic-phy-mdm9615"
			"qcom,usb-hsic-phy-msm8974"

- #phy-cells:
    Usage: required
    Value type: <u32>
    Definition: Should contain 0

- clocks:
    Usage: required
    Value type: <prop-encoded-array>
    Definition: Should contain clock specifier for phy, calibration and
                a calibration sleep clock

- clock-names:
    Usage: required
    Value type: <stringlist>
    Definition: Should contain "phy, "cal" and "cal_sleep"

- pinctrl-names:
    Usage: required
    Value type: <stringlist>
    Definition: Should contain "init" and "default" in that order

- pinctrl-0:
    Usage: required
    Value type: <prop-encoded-array>
    Definition: List of pinctrl settings to apply to keep HSIC pins in a glitch
                free state

- pinctrl-1:
    Usage: required
    Value type: <prop-encoded-array>
    Definition: List of pinctrl settings to apply to mux out the HSIC pins

EXAMPLE

usb-controller {
	ulpi {
		phy {
			compatible = "qcom,usb-hsic-phy-msm8974",
				     "qcom,usb-hsic-phy";
			#phy-cells = <0>;
			pinctrl-names = "init", "default";
			pinctrl-0 = <&hsic_sleep>;
			pinctrl-1 = <&hsic_default>;
			clocks = <&gcc GCC_USB_HSIC_CLK>,
				 <&gcc GCC_USB_HSIC_IO_CAL_CLK>,
				 <&gcc GCC_USB_HSIC_IO_CAL_SLEEP_CLK>;
			clock-names = "phy", "cal", "cal_sleep";
			assigned-clocks = <&gcc GCC_USB_HSIC_IO_CAL_CLK>;
			assigned-clock-rates = <960000>;
		};
	};
};