Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 | // SPDX-License-Identifier: GPL-2.0 // // Copyright (C) 2015-2018 Y Soft Corporation, a.s. #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> #include <dt-bindings/pwm/pwm.h> / { aliases: aliases { ethernet1 = ð1; ethernet2 = ð2; mmc0 = &usdhc3; mmc1 = &usdhc4; }; backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; brightness-levels = <0 32 64 128 255>; default-brightness-level = <32>; num-interpolated-steps = <8>; power-supply = <&sw2_reg>; status = "disabled"; }; lcd_display: display { compatible = "fsl,imx-parallel-display"; #address-cells = <1>; #size-cells = <0>; interface-pix-fmt = "rgb24"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ipu1>; status = "disabled"; port@0 { reg = <0>; lcd_display_in: endpoint { remote-endpoint = <&ipu1_di0_disp0>; }; }; port@1 { reg = <1>; lcd_display_out: endpoint { remote-endpoint = <&lcd_panel_in>; }; }; }; panel: panel { compatible = "dataimage,scf0700c48ggu18"; power-supply = <&sw2_reg>; status = "disabled"; port { lcd_panel_in: endpoint { remote-endpoint = <&lcd_display_out>; }; }; }; reg_pcie: regulator-pcie { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie_reg>; regulator-name = "MPCIE_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; enable-active-high; status = "disabled"; }; reg_usb_h1_vbus: regulator-usb-h1-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1_vbus>; regulator-name = "usb_h1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; enable-active-high; status = "disabled"; }; reg_usb_otg_vbus: regulator-usb-otg-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg_vbus>; regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; status = "okay"; }; }; &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; phy-reset-duration = <20>; phy-supply = <&sw2_reg>; status = "okay"; fixed-link { speed = <1000>; full-duplex; }; mdio { #address-cells = <1>; #size-cells = <0>; phy_port2: phy@1 { reg = <1>; }; phy_port3: phy@2 { reg = <2>; }; switch@10 { compatible = "qca,qca8334"; reg = <10>; switch_ports: ports { #address-cells = <1>; #size-cells = <0>; ethphy0: port@0 { reg = <0>; label = "cpu"; phy-mode = "rgmii-id"; ethernet = <&fec>; fixed-link { speed = <1000>; full-duplex; }; }; eth2: port@2 { reg = <2>; label = "eth2"; phy-handle = <&phy_port2>; }; eth1: port@3 { reg = <3>; label = "eth1"; phy-handle = <&phy_port3>; }; }; }; }; }; &hdmi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hdmi_cec>; ddc-i2c-bus = <&i2c2>; status = "disabled"; }; &i2c2 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; pmic@8 { compatible = "fsl,pfuze200"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pmic>; reg = <0x8>; regulators { sw1a_reg: sw1ab { regulator-min-microvolt = <300000>; regulator-max-microvolt = <1875000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <6250>; }; sw2_reg: sw2 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; sw3a_reg: sw3a { regulator-min-microvolt = <400000>; regulator-max-microvolt = <1975000>; regulator-boot-on; regulator-always-on; }; sw3b_reg: sw3b { regulator-min-microvolt = <400000>; regulator-max-microvolt = <1975000>; regulator-boot-on; regulator-always-on; }; swbst_reg: swbst { regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5150000>; }; vgen1_reg: vgen1 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <1550000>; }; vgen2_reg: vgen2 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <1550000>; }; vgen3_reg: vgen3 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vgen4_reg: vgen4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vgen5_reg: vgen5 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vgen6_reg: vgen6 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vref_reg: vrefddr { regulator-boot-on; regulator-always-on; }; vsnvs_reg: vsnvs { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3000000>; regulator-boot-on; regulator-always-on; }; }; }; leds: led-controller@30 { compatible = "ti,lp5562"; reg = <0x30>; clock-mode = /bits/ 8 <1>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; chan@0 { chan-name = "R"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; reg = <0>; }; chan@1 { chan-name = "G"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; reg = <1>; }; chan@2 { chan-name = "B"; led-cur = /bits/ 8 <0x20>; max-cur = /bits/ 8 <0x60>; reg = <2>; }; chan@3 { chan-name = "W"; led-cur = /bits/ 8 <0x0>; max-cur = /bits/ 8 <0x0>; reg = <3>; }; }; eeprom@57 { compatible = "atmel,24c128"; reg = <0x57>; pagesize = <64>; status = "okay"; }; touchscreen: touchscreen@5c { compatible = "pixcir,pixcir_tangoc"; reg = <0x5c>; pinctrl-0 = <&pinctrl_touch>; interrupt-parent = <&gpio4>; interrupts = <5 IRQ_TYPE_EDGE_FALLING>; attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>; reset-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; touchscreen-size-x = <800>; touchscreen-size-y = <480>; status = "disabled"; }; }; &i2c3 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; oled_1309: oled@3c { compatible = "solomon,ssd1309fb-i2c"; reg = <0x3c>; solomon,height = <64>; solomon,width = <128>; solomon,page-offset = <0>; solomon,segment-no-remap; solomon,prechargep2 = <15>; reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>; vbat-supply = <&sw2_reg>; status = "disabled"; }; oled_1305: oled@3d { compatible = "solomon,ssd1305fb-i2c"; reg = <0x3d>; solomon,height = <64>; solomon,width = <128>; solomon,page-offset = <0>; solomon,col-offset = <4>; solomon,prechargep2 = <15>; reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>; vbat-supply = <&sw2_reg>; status = "disabled"; }; gpio_oled: gpio@41 { compatible = "nxp,pca9536"; gpio-controller; #gpio-cells = <2>; reg = <0x41>; vcc-supply = <&sw2_reg>; status = "disabled"; }; touchkeys: keys@5a { compatible = "fsl,mpr121-touchkey"; reg = <0x5a>; vdd-supply = <&sw2_reg>; autorepeat; linux,keycodes = <KEY_1>, <KEY_2>, <KEY_3>, <KEY_4>, <KEY_5>, <KEY_6>, <KEY_7>, <KEY_8>, <KEY_9>, <KEY_BACKSPACE>, <KEY_0>, <KEY_ENTER>; poll-interval = <50>; status = "disabled"; }; }; &iomuxc { pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b020 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b020 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b020 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b020 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b020 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b020 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b020 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b020 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b020 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b020 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b020 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b020 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b020 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b020 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b010 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b010 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b098 >; }; pinctrl_hdmi_cec: hdmicecgrp { fsl,pins = < MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1b898 >; }; pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b899 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b899 >; }; pinctrl_i2c3: i2c3grp { fsl,pins = < MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b899 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899 >; }; pinctrl_ipu1: ipu1grp { fsl,pins = < MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 >; }; pinctrl_pcie: pciegrp { fsl,pins = < MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b098 MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b098 MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b098 >; }; pinctrl_pcie_reg: pciereggrp { fsl,pins = < MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b098 >; }; pinctrl_pmic: pmicgrp { fsl,pins = < MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b098 >; }; pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_GPIO_9__PWM1_OUT 0x8 >; }; pinctrl_touch: touchgrp { fsl,pins = < MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b098 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b098 >; }; pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0a8 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0a8 >; }; pinctrl_uart2: uart2grp { fsl,pins = < MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b098 MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b098 >; }; pinctrl_usbh1: usbh1grp { fsl,pins = < MX6QDL_PAD_EIM_D30__USB_H1_OC 0x1b098 >; }; pinctrl_usbh1_vbus: usbh1-vbus { fsl,pins = < MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x98 >; }; pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1b098 MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b098 >; }; pinctrl_usbotg_vbus: usbotg-vbus { fsl,pins = < MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x98 >; }; pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b018 MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b018 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 >; }; pinctrl_usdhc4: usdhc4grp { fsl,pins = < MX6QDL_PAD_SD4_CMD__SD4_CMD 0x1f069 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10069 MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17069 MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17069 MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17069 MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17069 MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17069 MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17069 MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17069 MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17069 >; }; pinctrl_wdog: wdoggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__WDOG2_B 0x1b0b0 >; }; }; &ipu1_di0_disp0 { remote-endpoint = <&lcd_display_in>; }; &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; vpcie-supply = <®_pcie>; status = "disabled"; }; &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "disabled"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; status = "okay"; }; &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; vbus-supply = <®_usb_h1_vbus>; over-current-active-low; status = "disabled"; }; &usbotg { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; vbus-supply = <®_usb_otg_vbus>; over-current-active-low; srp-disable; hnp-disable; adp-disable; status = "okay"; }; &usbphy1 { fsl,tx-d-cal = <106>; status = "okay"; }; &usbphy2 { fsl,tx-d-cal = <109>; status = "disabled"; }; &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <4>; cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; no-1-8-v; keep-power-in-suspend; wakeup-source; vmmc-supply = <&sw2_reg>; status = "disabled"; }; &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; bus-width = <8>; non-removable; no-1-8-v; keep-power-in-suspend; vmmc-supply = <&sw2_reg>; status = "okay"; }; &wdog1 { status = "disabled"; }; &wdog2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; fsl,ext-reset-output; status = "okay"; }; |