Linux Audio

Check our new training course

Embedded Linux Audio

Check our new training course
with Creative Commons CC-BY-SA
lecture materials

Bootlin logo

Elixir Cross Referencer

Loading...
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/gpio/gpio-davinci.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: GPIO controller for Davinci and keystone devices

maintainers:
  - Keerthy <j-keerthy@ti.com>

properties:
  compatible:
    oneOf:
      - items:
          - enum:
              - ti,k2g-gpio
              - ti,am654-gpio
              - ti,j721e-gpio
              - ti,am64-gpio
          - const: ti,keystone-gpio

      - items:
          - enum:
              - ti,dm6441-gpio
              - ti,keystone-gpio

  reg:
    maxItems: 1

  gpio-controller: true

  gpio-ranges: true

  gpio-line-names:
    description: strings describing the names of each gpio line.
    minItems: 1
    maxItems: 100

  "#gpio-cells":
    const: 2
    description:
      first cell is the pin number and second cell is used to specify optional parameters (unused).

  interrupts:
    description:
      The interrupts are specified as per the interrupt parent. Only banked
      or unbanked IRQs are supported at a time. If the interrupts are
      banked then provide list of interrupts corresponding to each bank, else
      provide the list of interrupts for each gpio.
    minItems: 1
    maxItems: 100

  ti,ngpio:
    $ref: /schemas/types.yaml#/definitions/uint32
    description: The number of GPIO pins supported consecutively.
    minimum: 1

  ti,davinci-gpio-unbanked:
    $ref: /schemas/types.yaml#/definitions/uint32
    description: The number of GPIOs that have an individual interrupt line to processor.
    minimum: 0

  clocks:
    maxItems: 1

  clock-names:
    const: gpio

  interrupt-controller: true

  power-domains:
    maxItems: 1

  "#interrupt-cells":
    const: 2

patternProperties:
  "^(.+-hog(-[0-9]+)?)$":
    type: object

    required:
      - gpio-hog

required:
  - compatible
  - reg
  - gpio-controller
  - "#gpio-cells"
  - interrupts
  - ti,ngpio
  - ti,davinci-gpio-unbanked
  - clocks
  - clock-names

additionalProperties: false

examples:
  - |
    #include<dt-bindings/interrupt-controller/arm-gic.h>

    gpio0: gpio@2603000 {
      compatible = "ti,k2g-gpio", "ti,keystone-gpio";
      reg = <0x02603000 0x100>;
      gpio-controller;
      #gpio-cells = <2>;
      interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 434 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 437 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 438 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 439 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 440 IRQ_TYPE_EDGE_RISING>;
      interrupt-controller;
      #interrupt-cells = <2>;
      ti,ngpio = <144>;
      ti,davinci-gpio-unbanked = <0>;
      clocks = <&k2g_clks 0x001b 0x0>;
      clock-names = "gpio";
    };

  - |
    #include<dt-bindings/interrupt-controller/arm-gic.h>

    gpio1: gpio@260bf00 {
      compatible = "ti,keystone-gpio";
      reg = <0x0260bf00 0x100>;
      gpio-controller;
      #gpio-cells = <2>;
      /* HW Interrupts mapped to GPIO pins */
      interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 121 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 124 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 147 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>,
                   <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
      clocks = <&clkgpio>;
      clock-names = "gpio";
      ti,ngpio = <32>;
      ti,davinci-gpio-unbanked = <32>;
    };

  - |
    wkup_gpio0: gpio0@42110000 {
      compatible = "ti,am654-gpio", "ti,keystone-gpio";
      reg = <0x42110000 0x100>;
      gpio-controller;
      #gpio-cells = <2>;
      interrupt-parent = <&intr_wkup_gpio>;
      interrupts = <60>, <61>, <62>, <63>;
      interrupt-controller;
      #interrupt-cells = <2>;
      ti,ngpio = <56>;
      ti,davinci-gpio-unbanked = <0>;
      clocks = <&k3_clks 59 0>;
      clock-names = "gpio";
    };