Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 | // SPDX-License-Identifier: GPL-2.0-only /dts-v1/; #include <dt-bindings/input/input.h> #include "omap443x.dtsi" #include "motorola-cpcap-mapphone.dtsi" / { chosen { stdout-path = &uart3; }; aliases { display0 = &lcd0; display1 = &hdmi0; }; /* * We seem to have only 1021 MB accessible, 1021 - 1022 is locked, * then 1023 - 1024 seems to contain mbm. */ memory { device_type = "memory"; reg = <0x80000000 0x3fd00000>; /* 1021 MB */ }; /* Poweroff GPIO probably connected to CPCAP */ gpio-poweroff { compatible = "gpio-poweroff"; pinctrl-0 = <&poweroff_gpio>; pinctrl-names = "default"; gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; /* gpio50 */ }; hdmi0: connector { compatible = "hdmi-connector"; pinctrl-0 = <&hdmi_hpd_gpio>; pinctrl-names = "default"; label = "hdmi"; type = "d"; hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio63 */ port { hdmi_connector_in: endpoint { remote-endpoint = <&hdmi_out>; }; }; }; /* * HDMI 5V regulator probably sourced from battery. Let's keep * keep this as always enabled for HDMI to work until we've * figured what the encoder chip is. */ hdmi_regulator: regulator-hdmi { compatible = "regulator-fixed"; regulator-name = "hdmi"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio59 */ enable-active-high; regulator-always-on; }; /* FS USB Host PHY on port 1 for mdm6600 */ fsusb1_phy: usb-phy@1 { compatible = "motorola,mapphone-mdm6600"; pinctrl-0 = <&usb_mdm6600_pins>; pinctrl-names = "default"; enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; /* gpio_95 */ power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54 */ reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; /* gpio_49 */ /* mode: gpio_148 gpio_149 */ motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>, <&gpio5 21 GPIO_ACTIVE_HIGH>; /* cmd: gpio_103 gpio_104 gpio_142 */ motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>, <&gpio4 8 GPIO_ACTIVE_HIGH>, <&gpio5 14 GPIO_ACTIVE_HIGH>; /* status: gpio_52 gpio_53 gpio_55 */ motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>, <&gpio2 21 GPIO_ACTIVE_HIGH>, <&gpio2 23 GPIO_ACTIVE_HIGH>; #phy-cells = <0>; }; /* HS USB host TLL nop-phy on port 2 for w3glte */ hsusb2_phy: usb-phy@2 { compatible = "usb-nop-xceiv"; #phy-cells = <0>; }; /* LCD regulator from sw5 source */ lcd_regulator: regulator-lcd { compatible = "regulator-fixed"; regulator-name = "lcd"; regulator-min-microvolt = <5050000>; regulator-max-microvolt = <5050000>; gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */ enable-active-high; vin-supply = <&sw5>; }; /* This is probably coming straight from the battery.. */ wl12xx_vmmc: regulator-wl12xx { compatible = "regulator-fixed"; regulator-name = "vwl1271"; regulator-min-microvolt = <1650000>; regulator-max-microvolt = <1650000>; gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; /* gpio94 */ startup-delay-us = <70000>; enable-active-high; }; soundcard { compatible = "audio-graph-card"; label = "Mapphone Audio"; widgets = "Speaker", "Earpiece", "Speaker", "Loudspeaker", "Headphone", "Headphone Jack", "Microphone", "Internal Mic"; routing = "Earpiece", "EP", "Loudspeaker", "SPKR", "Headphone Jack", "HSL", "Headphone Jack", "HSR", "MICR", "Internal Mic"; dais = <&mcbsp2_port>, <&mcbsp3_port>; }; pwm8: dmtimer-pwm-8 { pinctrl-names = "default"; pinctrl-0 = <&vibrator_direction_pin>; compatible = "ti,omap-dmtimer-pwm"; #pwm-cells = <3>; ti,timers = <&timer8>; ti,clock-source = <0x01>; }; pwm9: dmtimer-pwm-9 { pinctrl-names = "default"; pinctrl-0 = <&vibrator_enable_pin>; compatible = "ti,omap-dmtimer-pwm"; #pwm-cells = <3>; ti,timers = <&timer9>; ti,clock-source = <0x01>; }; vibrator { compatible = "pwm-vibrator"; pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>; pwm-names = "enable", "direction"; direction-duty-cycle-ns = <10000000>; }; backlight: backlight { compatible = "led-backlight"; leds = <&backlight_led>; brightness-levels = <31 63 95 127 159 191 223 255>; default-brightness-level = <6>; }; }; &cpu_thermal { polling-delay = <10000>; /* milliseconds */ }; &cpu_alert0 { temperature = <80000>; /* millicelsius */ }; &cpu0 { /* * Note that the 1.2GiHz mode is enabled for all SoC variants for * the Motorola Android Linux v3.0.8 based kernel. */ operating-points = < /* kHz uV */ 300000 1025000 600000 1200000 800000 1313000 1008000 1375000 1200000 1375000 >; }; &dss { status = "okay"; }; &dsi1 { status = "okay"; vdd-supply = <&vcsi>; port { dsi1_out_ep: endpoint { remote-endpoint = <&lcd0_in>; lanes = <0 1 2 3 4 5>; }; }; lcd0: panel@0 { compatible = "motorola,droid4-panel", "panel-dsi-cm"; reg = <0>; label = "lcd0"; vddi-supply = <&lcd_regulator>; reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ backlight = <&backlight>; width-mm = <50>; height-mm = <89>; rotation = <90>; panel-timing { clock-frequency = <0>; /* Calculated by dsi */ hback-porch = <2>; hactive = <540>; hfront-porch = <0>; hsync-len = <2>; vback-porch = <1>; vactive = <960>; vfront-porch = <0>; vsync-len = <1>; hsync-active = <0>; vsync-active = <0>; de-active = <1>; pixelclk-active = <1>; }; port { lcd0_in: endpoint { remote-endpoint = <&dsi1_out_ep>; }; }; }; }; &hdmi { status = "okay"; pinctrl-0 = <&dss_hdmi_pins>; pinctrl-names = "default"; vdda-supply = <&vdac>; port { hdmi_out: endpoint { remote-endpoint = <&hdmi_connector_in>; lanes = <1 0 3 2 5 4 7 6>; }; }; }; /* Battery NVRAM on 1-wire handled by w1_ds250x driver */ &hdqw1w { pinctrl-0 = <&hdq_pins>; pinctrl-names = "default"; ti,mode = "1w"; }; &i2c1 { tmp105@48 { compatible = "ti,tmp105"; reg = <0x48>; pinctrl-0 = <&tmp105_irq>; pinctrl-names = "default"; /* kpd_row0.gpio_178 */ interrupts-extended = <&gpio6 18 IRQ_TYPE_EDGE_FALLING &omap4_pmx_core 0x14e>; interrupt-names = "irq", "wakeup"; wakeup-source; }; }; &mmc1 { vmmc-supply = <&vwlan2>; bus-width = <4>; cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* gpio176 */ }; &mmc2 { vmmc-supply = <&vsdio>; bus-width = <8>; ti,non-removable; }; &mmc3 { pinctrl-names = "default"; pinctrl-0 = <&mmc3_pins>; vmmc-supply = <&wl12xx_vmmc>; /* uart2_tx.sdmmc3_dat1 pad as wakeirq */ interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH &omap4_pmx_core 0xde>; interrupt-names = "irq", "wakeup"; non-removable; bus-width = <4>; cap-power-off-card; keep-power-in-suspend; #address-cells = <1>; #size-cells = <0>; wlcore: wlcore@2 { compatible = "ti,wl1285", "ti,wl1283"; reg = <2>; /* gpio_100 with gpmc_wait2 pad as wakeirq */ interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_HIGH>, <&omap4_pmx_core 0x4e>; interrupt-names = "irq", "wakeup"; ref-clock-frequency = <26000000>; tcxo-clock-frequency = <26000000>; }; }; &i2c2 { touchscreen@4a { compatible = "atmel,maxtouch"; reg = <0x4a>; pinctrl-names = "default"; pinctrl-0 = <&touchscreen_pins>; reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */ /* gpio_183 with sys_nirq2 pad as wakeup */ interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>, <&omap4_pmx_core 0x160>; interrupt-names = "irq", "wakeup"; wakeup-source; }; isl29030@44 { compatible = "isil,isl29030"; reg = <0x44>; pinctrl-names = "default"; pinctrl-0 = <&als_proximity_pins>; interrupt-parent = <&gpio6>; interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */ }; }; &omap4_pmx_core { /* hdmi_hpd.gpio_63 */ hdmi_hpd_gpio: pinmux_hdmi_hpd_pins { pinctrl-single,pins = < OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3) >; }; hdq_pins: pinmux_hdq_pins { pinctrl-single,pins = < /* 0x4a100120 hdq_sio.hdq_sio aa27 */ OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0) >; }; /* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */ dss_hdmi_pins: pinmux_dss_hdmi_pins { pinctrl-single,pins = < OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) >; }; /* * Android uses PIN_OFF_INPUT_PULLDOWN | PIN_INPUT_PULLUP | MUX_MODE3 * for gpio_100, but the internal pull makes wlan flakey on some * devices. Off mode value should be tested if we have off mode working * later on. */ mmc3_pins: pinmux_mmc3_pins { pinctrl-single,pins = < /* 0x4a10008e gpmc_wait2.gpio_100 d23 */ OMAP4_IOPAD(0x08e, PIN_INPUT | MUX_MODE3) /* 0x4a100102 abe_mcbsp1_dx.sdmmc3_dat2 ab25 */ OMAP4_IOPAD(0x102, PIN_INPUT_PULLUP | MUX_MODE1) /* 0x4a100104 abe_mcbsp1_fsx.sdmmc3_dat3 ac27 */ OMAP4_IOPAD(0x104, PIN_INPUT_PULLUP | MUX_MODE1) /* 0x4a100118 uart2_cts.sdmmc3_clk ab26 */ OMAP4_IOPAD(0x118, PIN_INPUT | MUX_MODE1) /* 0x4a10011a uart2_rts.sdmmc3_cmd ab27 */ OMAP4_IOPAD(0x11a, PIN_INPUT_PULLUP | MUX_MODE1) /* 0x4a10011c uart2_rx.sdmmc3_dat0 aa25 */ OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE1) /* 0x4a10011e uart2_tx.sdmmc3_dat1 aa26 */ OMAP4_IOPAD(0x11e, PIN_INPUT_PULLUP | MUX_MODE1) >; }; /* gpmc_ncs0.gpio_50 */ poweroff_gpio: pinmux_poweroff_pins { pinctrl-single,pins = < OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3) >; }; /* kpd_row0.gpio_178 */ tmp105_irq: pinmux_tmp105_irq { pinctrl-single,pins = < OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3) >; }; usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins { /* gpio_60 */ pinctrl-single,pins = < OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) >; }; touchscreen_pins: pinmux_touchscreen_pins { pinctrl-single,pins = < OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3) OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3) >; }; als_proximity_pins: pinmux_als_proximity_pins { pinctrl-single,pins = < OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3) >; }; usb_mdm6600_pins: pinmux_usb_mdm6600_pins { pinctrl-single,pins = < /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */ OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3) /* power 0x4a10007c gpmc_nwp.gpio_54 c25 */ OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) /* reset 0x4a100072 gpmc_a25.gpio_49 d20 */ OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3) /* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */ OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3) /* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */ OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3) /* status0 0x4a10007e gpmc_clk.gpio_55 b22 */ OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3) /* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */ OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */ OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) /* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */ OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3) /* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */ OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3) /* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */ OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3) >; }; usb_ulpi_pins: pinmux_usb_ulpi_pins { pinctrl-single,pins = < OMAP4_IOPAD(0x196, MUX_MODE7) OMAP4_IOPAD(0x198, MUX_MODE7) OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0) OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0) OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0) OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0) OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0) OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0) OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0) OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0) OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0) OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0) OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0) >; }; /* usb0_otg_dp and usb0_otg_dm */ usb_utmi_pins: pinmux_usb_utmi_pins { pinctrl-single,pins = < OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0) OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0) OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7) OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7) OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7) OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7) OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7) OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7) OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7) OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7) OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7) OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7) OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7) OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7) >; }; /* * Note that the v3.0.8 stock userspace dynamically remuxes uart1 * rts pin probably for PM purposes to PIN_INPUT_PULLUP | MUX_MODE7 * when not used. If needed, we can add rts pin remux later based * on power measurements. */ uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < /* 0x4a10013c mcspi1_cs2.uart1_cts ag23 */ OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1) /* 0x4a10013e mcspi1_cs3.uart1_rts ah23 */ OMAP4_IOPAD(0x13e, MUX_MODE1) /* 0x4a100140 uart3_cts_rctx.uart1_tx f27 */ OMAP4_IOPAD(0x140, PIN_OUTPUT | MUX_MODE1) /* 0x4a1001ca dpm_emu14.uart1_rx aa3 */ OMAP4_IOPAD(0x1ca, PIN_INPUT_PULLUP | MUX_MODE2) >; }; /* uart3_tx_irtx and uart3_rx_irrx */ uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < OMAP4_IOPAD(0x196, MUX_MODE7) OMAP4_IOPAD(0x198, MUX_MODE7) OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7) OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7) OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7) OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7) OMAP4_IOPAD(0x1ba, MUX_MODE2) OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2) OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7) OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7) OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7) OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7) OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7) OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7) >; }; uart4_pins: pinmux_uart4_pins { pinctrl-single,pins = < OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx */ OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx */ OMAP4_IOPAD(0x110, PIN_INPUT_PULLUP | MUX_MODE5) /* uart4_cts */ OMAP4_IOPAD(0x112, PIN_OUTPUT_PULLUP | MUX_MODE5) /* uart4_rts */ >; }; mcbsp2_pins: pinmux_mcbsp2_pins { pinctrl-single,pins = < OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx */ OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_dr */ OMAP4_IOPAD(0x0fa, PIN_OUTPUT | MUX_MODE0) /* abe_mcbsp2_dx */ OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx */ >; }; mcbsp3_pins: pinmux_mcbsp3_pins { pinctrl-single,pins = < OMAP4_IOPAD(0x106, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_dr */ OMAP4_IOPAD(0x108, PIN_OUTPUT | MUX_MODE1) /* abe_mcbsp3_dx */ OMAP4_IOPAD(0x10a, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_clkx */ OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */ >; }; vibrator_direction_pin: pinmux_vibrator_direction_pin { pinctrl-single,pins = < OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */ >; }; vibrator_enable_pin: pinmux_vibrator_enable_pin { pinctrl-single,pins = < OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */ >; }; }; &omap4_pmx_wkup { usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins { /* gpio_wk0 */ pinctrl-single,pins = < OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3) >; }; }; /* RNG is used by secure mode and not accessible */ &rng_target { status = "disabled"; }; /* Configure pwm clock source for timers 8 & 9 */ &timer8 { assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>; assigned-clock-parents = <&sys_clkin_ck>; }; &timer9 { assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>; assigned-clock-parents = <&sys_clkin_ck>; }; /* * The uart1 port is wired to mdm6600 with rts and cts. The modem uses gpio_149 * for wake-up events for both the USB PHY and the UART. We can use gpio_149 * pad as the shared wakeirq for the UART rather than the RX or CTS pad as we * have gpio_149 trigger before the UART transfer starts. */ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>; interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH &omap4_pmx_core 0x110>; uart-has-rtscts; current-speed = <115200>; }; &uart3 { interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH &omap4_pmx_core 0x17c>; }; &uart4 { pinctrl-names = "default"; pinctrl-0 = <&uart4_pins>; bluetooth { compatible = "ti,wl1285-st"; enable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; /* gpio 174 */ max-speed = <3686400>; }; }; &usbhsohci { phys = <&fsusb1_phy>; phy-names = "usb"; }; &usbhsehci { phys = <&hsusb2_phy>; }; &usbhshost { port1-mode = "ohci-phy-4pin-dpdm"; port2-mode = "ehci-tll"; }; /* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */ &usb_otg_hs { interface-type = <1>; mode = <3>; /* * Max 300 mA steps based on similar PMIC MC13783UG.pdf "Table 10-4. * VBUS Regulator Main Characteristics". Binding uses 2 mA units. */ power = <150>; }; &i2c4 { ak8975: magnetometer@c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; vdd-supply = <&vhvio>; interrupt-parent = <&gpio6>; interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */ rotation-matrix = "-1", "0", "0", "0", "1", "0", "0", "0", "-1"; }; }; &mcbsp2 { #sound-dai-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&mcbsp2_pins>; status = "okay"; mcbsp2_port: port { cpu_dai2: endpoint { dai-format = "i2s"; remote-endpoint = <&cpcap_audio_codec0>; frame-master = <&cpcap_audio_codec0>; bitclock-master = <&cpcap_audio_codec0>; }; }; }; &mcbsp3 { #sound-dai-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&mcbsp3_pins>; status = "okay"; mcbsp3_port: port { cpu_dai3: endpoint { dai-format = "dsp_a"; frame-master = <&cpcap_audio_codec1>; bitclock-master = <&cpcap_audio_codec1>; remote-endpoint = <&cpcap_audio_codec1>; }; }; }; &cpcap_audio_codec0 { remote-endpoint = <&cpu_dai2>; }; &cpcap_audio_codec1 { remote-endpoint = <&cpu_dai3>; }; |