Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 | // SPDX-License-Identifier: GPL-2.0-or-later /* * lm83.c - Part of lm_sensors, Linux kernel modules for hardware * monitoring * Copyright (C) 2003-2009 Jean Delvare <jdelvare@suse.de> * * Heavily inspired from the lm78, lm75 and adm1021 drivers. The LM83 is * a sensor chip made by National Semiconductor. It reports up to four * temperatures (its own plus up to three external ones) with a 1 deg * resolution and a 3-4 deg accuracy. Complete datasheet can be obtained * from National's website at: * http://www.national.com/pf/LM/LM83.html * Since the datasheet omits to give the chip stepping code, I give it * here: 0x03 (at register 0xff). * * Also supports the LM82 temp sensor, which is basically a stripped down * model of the LM83. Datasheet is here: * http://www.national.com/pf/LM/LM82.html */ #include <linux/module.h> #include <linux/init.h> #include <linux/slab.h> #include <linux/jiffies.h> #include <linux/i2c.h> #include <linux/hwmon-sysfs.h> #include <linux/hwmon.h> #include <linux/err.h> #include <linux/mutex.h> #include <linux/sysfs.h> /* * Addresses to scan * Address is selected using 2 three-level pins, resulting in 9 possible * addresses. */ static const unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END }; enum chips { lm83, lm82 }; /* * The LM83 registers * Manufacturer ID is 0x01 for National Semiconductor. */ #define LM83_REG_R_MAN_ID 0xFE #define LM83_REG_R_CHIP_ID 0xFF #define LM83_REG_R_CONFIG 0x03 #define LM83_REG_W_CONFIG 0x09 #define LM83_REG_R_STATUS1 0x02 #define LM83_REG_R_STATUS2 0x35 #define LM83_REG_R_LOCAL_TEMP 0x00 #define LM83_REG_R_LOCAL_HIGH 0x05 #define LM83_REG_W_LOCAL_HIGH 0x0B #define LM83_REG_R_REMOTE1_TEMP 0x30 #define LM83_REG_R_REMOTE1_HIGH 0x38 #define LM83_REG_W_REMOTE1_HIGH 0x50 #define LM83_REG_R_REMOTE2_TEMP 0x01 #define LM83_REG_R_REMOTE2_HIGH 0x07 #define LM83_REG_W_REMOTE2_HIGH 0x0D #define LM83_REG_R_REMOTE3_TEMP 0x31 #define LM83_REG_R_REMOTE3_HIGH 0x3A #define LM83_REG_W_REMOTE3_HIGH 0x52 #define LM83_REG_R_TCRIT 0x42 #define LM83_REG_W_TCRIT 0x5A /* * Conversions and various macros * The LM83 uses signed 8-bit values with LSB = 1 degree Celsius. */ #define TEMP_FROM_REG(val) ((val) * 1000) #define TEMP_TO_REG(val) ((val) <= -128000 ? -128 : \ (val) >= 127000 ? 127 : \ (val) < 0 ? ((val) - 500) / 1000 : \ ((val) + 500) / 1000) static const u8 LM83_REG_R_TEMP[] = { LM83_REG_R_LOCAL_TEMP, LM83_REG_R_REMOTE1_TEMP, LM83_REG_R_REMOTE2_TEMP, LM83_REG_R_REMOTE3_TEMP, LM83_REG_R_LOCAL_HIGH, LM83_REG_R_REMOTE1_HIGH, LM83_REG_R_REMOTE2_HIGH, LM83_REG_R_REMOTE3_HIGH, LM83_REG_R_TCRIT, }; static const u8 LM83_REG_W_HIGH[] = { LM83_REG_W_LOCAL_HIGH, LM83_REG_W_REMOTE1_HIGH, LM83_REG_W_REMOTE2_HIGH, LM83_REG_W_REMOTE3_HIGH, LM83_REG_W_TCRIT, }; /* * Client data (each client gets its own) */ struct lm83_data { struct i2c_client *client; const struct attribute_group *groups[3]; struct mutex update_lock; char valid; /* zero until following fields are valid */ unsigned long last_updated; /* in jiffies */ /* registers values */ s8 temp[9]; /* 0..3: input 1-4, 4..7: high limit 1-4, 8 : critical limit */ u16 alarms; /* bitvector, combined */ }; static struct lm83_data *lm83_update_device(struct device *dev) { struct lm83_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { int nr; dev_dbg(&client->dev, "Updating lm83 data.\n"); for (nr = 0; nr < 9; nr++) { data->temp[nr] = i2c_smbus_read_byte_data(client, LM83_REG_R_TEMP[nr]); } data->alarms = i2c_smbus_read_byte_data(client, LM83_REG_R_STATUS1) + (i2c_smbus_read_byte_data(client, LM83_REG_R_STATUS2) << 8); data->last_updated = jiffies; data->valid = 1; } mutex_unlock(&data->update_lock); return data; } /* * Sysfs stuff */ static ssize_t temp_show(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct lm83_data *data = lm83_update_device(dev); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index])); } static ssize_t temp_store(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct lm83_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; long val; int nr = attr->index; int err; err = kstrtol(buf, 10, &val); if (err < 0) return err; mutex_lock(&data->update_lock); data->temp[nr] = TEMP_TO_REG(val); i2c_smbus_write_byte_data(client, LM83_REG_W_HIGH[nr - 4], data->temp[nr]); mutex_unlock(&data->update_lock); return count; } static ssize_t alarms_show(struct device *dev, struct device_attribute *dummy, char *buf) { struct lm83_data *data = lm83_update_device(dev); return sprintf(buf, "%d\n", data->alarms); } static ssize_t alarm_show(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct lm83_data *data = lm83_update_device(dev); int bitnr = attr->index; return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1); } static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0); static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1); static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 2); static SENSOR_DEVICE_ATTR_RO(temp4_input, temp, 3); static SENSOR_DEVICE_ATTR_RW(temp1_max, temp, 4); static SENSOR_DEVICE_ATTR_RW(temp2_max, temp, 5); static SENSOR_DEVICE_ATTR_RW(temp3_max, temp, 6); static SENSOR_DEVICE_ATTR_RW(temp4_max, temp, 7); static SENSOR_DEVICE_ATTR_RO(temp1_crit, temp, 8); static SENSOR_DEVICE_ATTR_RO(temp2_crit, temp, 8); static SENSOR_DEVICE_ATTR_RW(temp3_crit, temp, 8); static SENSOR_DEVICE_ATTR_RO(temp4_crit, temp, 8); /* Individual alarm files */ static SENSOR_DEVICE_ATTR_RO(temp1_crit_alarm, alarm, 0); static SENSOR_DEVICE_ATTR_RO(temp3_crit_alarm, alarm, 1); static SENSOR_DEVICE_ATTR_RO(temp3_fault, alarm, 2); static SENSOR_DEVICE_ATTR_RO(temp3_max_alarm, alarm, 4); static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, alarm, 6); static SENSOR_DEVICE_ATTR_RO(temp2_crit_alarm, alarm, 8); static SENSOR_DEVICE_ATTR_RO(temp4_crit_alarm, alarm, 9); static SENSOR_DEVICE_ATTR_RO(temp4_fault, alarm, 10); static SENSOR_DEVICE_ATTR_RO(temp4_max_alarm, alarm, 12); static SENSOR_DEVICE_ATTR_RO(temp2_fault, alarm, 13); static SENSOR_DEVICE_ATTR_RO(temp2_max_alarm, alarm, 15); /* Raw alarm file for compatibility */ static DEVICE_ATTR_RO(alarms); static struct attribute *lm83_attributes[] = { &sensor_dev_attr_temp1_input.dev_attr.attr, &sensor_dev_attr_temp3_input.dev_attr.attr, &sensor_dev_attr_temp1_max.dev_attr.attr, &sensor_dev_attr_temp3_max.dev_attr.attr, &sensor_dev_attr_temp1_crit.dev_attr.attr, &sensor_dev_attr_temp3_crit.dev_attr.attr, &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp3_fault.dev_attr.attr, &sensor_dev_attr_temp3_max_alarm.dev_attr.attr, &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, &dev_attr_alarms.attr, NULL }; static const struct attribute_group lm83_group = { .attrs = lm83_attributes, }; static struct attribute *lm83_attributes_opt[] = { &sensor_dev_attr_temp2_input.dev_attr.attr, &sensor_dev_attr_temp4_input.dev_attr.attr, &sensor_dev_attr_temp2_max.dev_attr.attr, &sensor_dev_attr_temp4_max.dev_attr.attr, &sensor_dev_attr_temp2_crit.dev_attr.attr, &sensor_dev_attr_temp4_crit.dev_attr.attr, &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp4_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp4_fault.dev_attr.attr, &sensor_dev_attr_temp4_max_alarm.dev_attr.attr, &sensor_dev_attr_temp2_fault.dev_attr.attr, &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, NULL }; static const struct attribute_group lm83_group_opt = { .attrs = lm83_attributes_opt, }; /* * Real code */ /* Return 0 if detection is successful, -ENODEV otherwise */ static int lm83_detect(struct i2c_client *new_client, struct i2c_board_info *info) { struct i2c_adapter *adapter = new_client->adapter; const char *name; u8 man_id, chip_id; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; /* Detection */ if ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS1) & 0xA8) || (i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS2) & 0x48) || (i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG) & 0x41)) { dev_dbg(&adapter->dev, "LM83 detection failed at 0x%02x\n", new_client->addr); return -ENODEV; } /* Identification */ man_id = i2c_smbus_read_byte_data(new_client, LM83_REG_R_MAN_ID); if (man_id != 0x01) /* National Semiconductor */ return -ENODEV; chip_id = i2c_smbus_read_byte_data(new_client, LM83_REG_R_CHIP_ID); switch (chip_id) { case 0x03: name = "lm83"; break; case 0x01: name = "lm82"; break; default: /* identification failed */ dev_info(&adapter->dev, "Unsupported chip (man_id=0x%02X, chip_id=0x%02X)\n", man_id, chip_id); return -ENODEV; } strlcpy(info->type, name, I2C_NAME_SIZE); return 0; } static const struct i2c_device_id lm83_id[]; static int lm83_probe(struct i2c_client *new_client) { struct device *hwmon_dev; struct lm83_data *data; data = devm_kzalloc(&new_client->dev, sizeof(struct lm83_data), GFP_KERNEL); if (!data) return -ENOMEM; data->client = new_client; mutex_init(&data->update_lock); /* * Register sysfs hooks * The LM82 can only monitor one external diode which is * at the same register as the LM83 temp3 entry - so we * declare 1 and 3 common, and then 2 and 4 only for the LM83. */ data->groups[0] = &lm83_group; if (i2c_match_id(lm83_id, new_client)->driver_data == lm83) data->groups[1] = &lm83_group_opt; hwmon_dev = devm_hwmon_device_register_with_groups(&new_client->dev, new_client->name, data, data->groups); return PTR_ERR_OR_ZERO(hwmon_dev); } /* * Driver data (common to all clients) */ static const struct i2c_device_id lm83_id[] = { { "lm83", lm83 }, { "lm82", lm82 }, { } }; MODULE_DEVICE_TABLE(i2c, lm83_id); static struct i2c_driver lm83_driver = { .class = I2C_CLASS_HWMON, .driver = { .name = "lm83", }, .probe_new = lm83_probe, .id_table = lm83_id, .detect = lm83_detect, .address_list = normal_i2c, }; module_i2c_driver(lm83_driver); MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>"); MODULE_DESCRIPTION("LM83 driver"); MODULE_LICENSE("GPL"); |