Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 | // SPDX-License-Identifier: GPL-2.0 // // Copyright (C) 2019 Logic PD, Inc. #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> / { chosen { stdout-path = &uart1; }; memory@10000000 { device_type = "memory"; reg = <0x10000000 0x80000000>; }; reg_wl18xx_vmmc: regulator-wl18xx { compatible = "regulator-fixed"; regulator-name = "vwl1837"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&gpio7 0 GPIO_ACTIVE_HIGH>; startup-delay-us = <70000>; enable-active-high; }; }; &clks { assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>; assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, <&clks IMX6QDL_CLK_PLL3_USB_OTG>; }; &gpmi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpmi_nand>; nand-on-flash-bbt; status = "okay"; }; &i2c3 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; pfuze100: pmic@8 { compatible = "fsl,pfuze100"; reg = <0x08>; regulators { sw1a_reg: sw1ab { regulator-min-microvolt = <725000>; regulator-max-microvolt = <1450000>; regulator-name = "vddcore"; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <6250>; }; sw1c_reg: sw1c { regulator-min-microvolt = <725000>; regulator-max-microvolt = <1450000>; regulator-name = "vddsoc"; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <6250>; }; sw2_reg: sw2 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "gen_3v3"; regulator-boot-on; }; sw3a_reg: sw3a { regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; regulator-name = "sw3a_vddr"; regulator-boot-on; regulator-always-on; }; sw3b_reg: sw3b { regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; regulator-name = "sw3b_vddr"; regulator-boot-on; regulator-always-on; }; sw4_reg: sw4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-name = "gen_rgmii"; }; swbst_reg: swbst { regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5150000>; regulator-name = "gen_5v0"; }; snvs_reg: vsnvs { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3000000>; regulator-name = "gen_vsns"; regulator-boot-on; regulator-always-on; }; vref_reg: vrefddr { regulator-boot-on; regulator-always-on; }; vgen1_reg: vgen1 { regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; regulator-name = "gen_1v5"; }; vgen2_reg: vgen2 { regulator-name = "vgen2"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1550000>; }; vgen3_reg: vgen3 { regulator-name = "gen_vadj_0"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; }; vgen4_reg: vgen4 { regulator-name = "gen_1v8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; vgen5_reg: vgen5 { regulator-name = "gen_vadj_1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vgen6_reg: vgen6 { regulator-name = "gen_2v5"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-always-on; }; coin_reg: coin { regulator-min-microvolt = <2500000>; regulator-max-microvolt = <3000000>; regulator-always-on; }; }; }; temperature-sensor@49 { compatible = "ti,tmp102"; reg = <0x49>; interrupt-parent = <&gpio6>; interrupts = <15 IRQ_TYPE_LEVEL_LOW>; #thermal-sensor-cells = <1>; }; temperature-sensor@4a { compatible = "ti,tmp102"; reg = <0x4a>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_tempsense>; interrupt-parent = <&gpio6>; interrupts = <15 IRQ_TYPE_LEVEL_LOW>; #thermal-sensor-cells = <1>; }; eeprom@51 { compatible = "atmel,24c64"; pagesize = <32>; read-only; /* Manufacturing EEPROM programmed at factory */ reg = <0x51>; }; eeprom@52 { compatible = "atmel,24c64"; pagesize = <32>; reg = <0x52>; }; }; /* Reroute power feeding the CPU to come from the external PMIC */ ®_arm { vin-supply = <&sw1a_reg>; }; ®_soc { vin-supply = <&sw1c_reg>; }; &snvs_poweroff { status = "okay"; }; &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; pinctrl_gpmi_nand: gpmi-nandgrp { fsl,pins = < MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x0b0b1 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x0b0b1 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x0b0b1 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x0b000 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x0b0b1 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x0b0b1 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x0b0b1 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x0b0b1 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x0b0b1 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x0b0b1 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x0b0b1 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x0b0b1 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x0b0b1 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x0b0b1 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x0b0b1 >; }; pinctrl_hog: hoggrp { fsl,pins = < /* Enable ARM Debugger */ MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL 0x1b0b0 MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO 0x1b0b0 MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00 0x1b0b0 MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK 0x1b0b0 MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01 0x1b0b0 MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02 0x1b0b0 MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03 0x1b0b0 MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04 0x1b0b0 MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05 0x1b0b0 MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06 0x1b0b0 MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07 0x1b0b0 MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08 0x1b0b0 MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09 0x1b0b0 MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10 0x1b0b0 MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11 0x1b0b0 MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12 0x1b0b0 MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13 0x1b0b0 MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14 0x1b0b0 MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15 0x1b0b0 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 >; }; pinctrl_i2c3: i2c3grp { fsl,pins = < MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 >; }; pinctrl_tempsense: tempsensegrp { fsl,pins = < MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 >; }; pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 >; }; pinctrl_uart2: uart2grp { fsl,pins = < MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x13059 /* BT_EN */ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 >; }; pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170B9 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100B9 MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170B9 MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170B9 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170B9 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170B9 >; }; pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17049 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10049 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17049 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17049 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17049 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17049 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x130b0 /* WL_IRQ */ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* WLAN_EN */ >; }; }; &snvs_poweroff { status = "okay"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; uart-has-rtscts; status = "okay"; bluetooth { compatible = "ti,wl1837-st"; enable-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; }; }; &usdhc1 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; non-removable; keep-power-in-suspend; wakeup-source; vmmc-supply = <&sw2_reg>; status = "okay"; }; &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; non-removable; cap-power-off-card; keep-power-in-suspend; wakeup-source; vmmc-supply = <®_wl18xx_vmmc>; #address-cells = <1>; #size-cells = <0>; status = "okay"; wlcore: wlcore@2 { compatible = "ti,wl1837"; reg = <2>; interrupt-parent = <&gpio7>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; tcxo-clock-frequency = <26000000>; }; }; |