Linux Audio

Check our new training course

Embedded Linux Audio

Check our new training course
with Creative Commons CC-BY-SA
lecture materials

Bootlin logo

Elixir Cross Referencer

Loading...
   1
   2
   3
   4
   5
   6
   7
   8
   9
  10
  11
  12
  13
  14
  15
  16
  17
  18
  19
  20
  21
  22
  23
  24
  25
  26
  27
  28
  29
  30
  31
  32
  33
  34
  35
  36
  37
  38
  39
  40
  41
  42
  43
  44
  45
  46
  47
  48
  49
  50
  51
  52
  53
  54
  55
  56
  57
  58
  59
  60
  61
  62
  63
  64
  65
  66
  67
  68
  69
  70
  71
  72
  73
  74
  75
  76
  77
  78
  79
  80
  81
  82
  83
  84
  85
  86
  87
  88
  89
  90
  91
  92
  93
  94
  95
  96
  97
  98
  99
 100
 101
 102
 103
 104
 105
 106
 107
 108
 109
 110
 111
 112
 113
 114
 115
 116
 117
 118
 119
 120
 121
 122
 123
 124
 125
 126
 127
 128
 129
 130
 131
 132
 133
 134
 135
 136
 137
 138
 139
 140
 141
 142
 143
 144
 145
 146
 147
 148
 149
 150
 151
 152
 153
 154
 155
 156
 157
 158
 159
 160
 161
 162
 163
 164
 165
 166
 167
 168
 169
 170
 171
 172
 173
 174
 175
 176
 177
 178
 179
 180
 181
 182
 183
 184
 185
 186
 187
 188
 189
 190
 191
 192
 193
 194
 195
 196
 197
 198
 199
 200
 201
 202
 203
 204
 205
 206
 207
 208
 209
 210
 211
 212
 213
 214
 215
 216
 217
 218
 219
 220
 221
 222
 223
 224
 225
 226
 227
 228
 229
 230
 231
 232
 233
 234
 235
 236
 237
 238
 239
 240
 241
 242
 243
 244
 245
 246
 247
 248
 249
 250
 251
 252
 253
 254
 255
 256
 257
 258
 259
 260
 261
 262
 263
 264
 265
 266
 267
 268
 269
 270
 271
 272
 273
 274
 275
 276
 277
 278
 279
 280
 281
 282
 283
 284
 285
 286
 287
 288
 289
 290
 291
 292
 293
 294
 295
 296
 297
 298
 299
 300
 301
 302
 303
 304
 305
 306
 307
 308
 309
 310
 311
 312
 313
 314
 315
 316
 317
 318
 319
 320
 321
 322
 323
 324
 325
 326
 327
 328
 329
 330
 331
 332
 333
 334
 335
 336
 337
 338
 339
 340
 341
 342
 343
 344
 345
 346
 347
 348
 349
 350
 351
 352
 353
 354
 355
 356
 357
 358
 359
 360
 361
 362
 363
 364
 365
 366
 367
 368
 369
 370
 371
 372
 373
 374
 375
 376
 377
 378
 379
 380
 381
 382
 383
 384
 385
 386
 387
 388
 389
 390
 391
 392
 393
 394
 395
 396
 397
 398
 399
 400
 401
 402
 403
 404
 405
 406
 407
 408
 409
 410
 411
 412
 413
 414
 415
 416
 417
 418
 419
 420
 421
 422
 423
 424
 425
 426
 427
 428
 429
 430
 431
 432
 433
 434
 435
 436
 437
 438
 439
 440
 441
 442
 443
 444
 445
 446
 447
 448
 449
 450
 451
 452
 453
 454
 455
 456
 457
 458
 459
 460
 461
 462
 463
 464
 465
 466
 467
 468
 469
 470
 471
 472
 473
 474
 475
 476
 477
 478
 479
 480
 481
 482
 483
 484
 485
 486
 487
 488
 489
 490
 491
 492
 493
 494
 495
 496
 497
 498
 499
 500
 501
 502
 503
 504
 505
 506
 507
 508
 509
 510
 511
 512
 513
 514
 515
 516
 517
 518
 519
 520
 521
 522
 523
 524
 525
 526
 527
 528
 529
 530
 531
 532
 533
 534
 535
 536
 537
 538
 539
 540
 541
 542
 543
 544
 545
 546
 547
 548
 549
 550
 551
 552
 553
 554
 555
 556
 557
 558
 559
 560
 561
 562
 563
 564
 565
 566
 567
 568
 569
 570
 571
 572
 573
 574
 575
 576
 577
 578
 579
 580
 581
 582
 583
 584
 585
 586
 587
 588
 589
 590
 591
 592
 593
 594
 595
 596
 597
 598
 599
 600
 601
 602
 603
 604
 605
 606
 607
 608
 609
 610
 611
 612
 613
 614
 615
 616
 617
 618
 619
 620
 621
 622
 623
 624
 625
 626
 627
 628
 629
 630
 631
 632
 633
 634
 635
 636
 637
 638
 639
 640
 641
 642
 643
 644
 645
 646
 647
 648
 649
 650
 651
 652
 653
 654
 655
 656
 657
 658
 659
 660
 661
 662
 663
 664
 665
 666
 667
 668
 669
 670
 671
 672
 673
 674
 675
 676
 677
 678
 679
 680
 681
 682
 683
 684
 685
 686
 687
 688
 689
 690
 691
 692
 693
 694
 695
 696
 697
 698
 699
 700
 701
 702
 703
 704
 705
 706
 707
 708
 709
 710
 711
 712
 713
 714
 715
 716
 717
 718
 719
 720
 721
 722
 723
 724
 725
 726
 727
 728
 729
 730
 731
 732
 733
 734
 735
 736
 737
 738
 739
 740
 741
 742
 743
 744
 745
 746
 747
 748
 749
 750
 751
 752
 753
 754
 755
 756
 757
 758
 759
 760
 761
 762
 763
 764
 765
 766
 767
 768
 769
 770
 771
 772
 773
 774
 775
 776
 777
 778
 779
 780
 781
 782
 783
 784
 785
 786
 787
 788
 789
 790
 791
 792
 793
 794
 795
 796
 797
 798
 799
 800
 801
 802
 803
 804
 805
 806
 807
 808
 809
 810
 811
 812
 813
 814
 815
 816
 817
 818
 819
 820
 821
 822
 823
 824
 825
 826
 827
 828
 829
 830
 831
 832
 833
 834
 835
 836
 837
 838
 839
 840
 841
 842
 843
 844
 845
 846
 847
 848
 849
 850
 851
 852
 853
 854
 855
 856
 857
 858
 859
 860
 861
 862
 863
 864
 865
 866
 867
 868
 869
 870
 871
 872
 873
 874
 875
 876
 877
 878
 879
 880
 881
 882
 883
 884
 885
 886
 887
 888
 889
 890
 891
 892
 893
 894
 895
 896
 897
 898
 899
 900
 901
 902
 903
 904
 905
 906
 907
 908
 909
 910
 911
 912
 913
 914
 915
 916
 917
 918
 919
 920
 921
 922
 923
 924
 925
 926
 927
 928
 929
 930
 931
 932
 933
 934
 935
 936
 937
 938
 939
 940
 941
 942
 943
 944
 945
 946
 947
 948
 949
 950
 951
 952
 953
 954
 955
 956
 957
 958
 959
 960
 961
 962
 963
 964
 965
 966
 967
 968
 969
 970
 971
 972
 973
 974
 975
 976
 977
 978
 979
 980
 981
 982
 983
 984
 985
 986
 987
 988
 989
 990
 991
 992
 993
 994
 995
 996
 997
 998
 999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
/*
 * Copyright 2014 General Electric Company
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This file is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License
 *     version 2 as published by the Free Software Foundation.
 *
 *     This file is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

/dts-v1/;

#include "imx53.dtsi"
#include <dt-bindings/input/input.h>

/ {
	model = "General Electric CS ONE";
	compatible = "ge,imx53-cpuvo", "fsl,imx53";

	aliases {
		spi0 = &cspi;
		spi1 = &ecspi1;
		spi2 = &ecspi2;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	memory@70000000 {
		device_type = "memory";
		reg = <0x70000000 0x20000000>,
		      <0xb0000000 0x20000000>;
	};

	cko2_11M: sgtl-clock-cko2 {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <11289600>;
	};

	achc_24M: achc-clock {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <24000000>;
	};

	sgtlsound: sound {
		compatible = "fsl,imx53-cpuvo-sgtl5000",
			     "fsl,imx-audio-sgtl5000";
		model = "imx53-cpuvo-sgtl5000";
		ssi-controller = <&ssi2>;
		audio-codec = <&sgtl5000>;
		audio-routing =
			"MIC_IN", "Mic Jack",
			"Mic Jack", "Mic Bias",
			"Headphone Jack", "HP_OUT";
		mux-int-port = <2>;
		mux-ext-port = <6>;
	};

	reg_sgtl5k: regulator-sgtl5k {
		compatible = "regulator-fixed";
		regulator-name = "regulator-sgtl5k";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-always-on;
	};

	reg_usb_otg_vbus: regulator-usb-otg-vbus {
		compatible = "regulator-fixed";
		regulator-name = "usbotg_vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		pinctrl-0 = <&pinctrl_usb_otg_vbus>;
		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	reg_usb_vbus: regulator-usb-vbus {
		compatible = "regulator-fixed";
		regulator-name = "usbh1_vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-always-on;
	};

	reg_usbh2_vbus: regulator-usbh2-vbus {
		compatible = "regulator-fixed";
		regulator-name = "usbh2_vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usbh2_vbus>;
		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	reg_usbh3_vbus: regulator-usbh3-vbus {
		compatible = "regulator-fixed";
		regulator-name = "usbh3_vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usbh3_vbus>;
		gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	reg_tsiref: regulator-tsiref {
		compatible = "regulator-fixed";
		regulator-name = "tsiref";
		regulator-min-microvolt = <2500000>;
		regulator-max-microvolt = <2500000>;
		regulator-always-on;
	};

	reg_3v3: regulator-3v3 {
		/* TPS54320 */
		compatible = "regulator-fixed";
		regulator-name = "3V3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-always-on;
	};

	reg_3v3_lcd: regulator-3v3-lcd {
		/* MIC2009 */
		compatible = "regulator-fixed";
		regulator-name = "LCD_3V3";
		vin-supply = <&reg_3v3>;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-always-on;
	};

	pwm_bl: backlight {
		compatible = "pwm-backlight";
		pwms = <&pwm2 0 50000>;
		brightness-levels = <0 2 5 7 10 12 15 17 20 22 25 28 30 33 35
				     38 40 43 45 48 51 53 56 58 61 63 66 68 71
				     73 76 79 81 84 86 89 91 94 96 99 102 104
				     107 109 112 114 117 119 122 124 127 130
				     132 135 137 140 142 145 147 150 153 155
				     158 160 163 165 168 170 173 175 178 181
				     183 186 188 191 193 196 198 201 204 206
				     209 211 214 216 219 221 224 226 229 232
				     234 237 239 242 244 247 249 252 255>;
		default-brightness-level = <0>;
		enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
		power-supply = <&reg_3v3_lcd>;
	};

	leds-brightness {
		compatible = "pwm-leds";

		alarm-brightness {
			pwms = <&pwm1 0 100000>;
			max-brightness = <255>;
		};
	};

	leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_alarmled_pins>;

		alarm1 {
			label = "alarm:red";
			gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
		};

		alarm2 {
			label = "alarm:yellow";
			gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>;
		};

		alarm3 {
			label = "alarm:blue";
			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
		};

		alarm4 {
			label = "alarm:silenced";
			gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>;
		};
	};

	gpio-poweroff {
		compatible = "gpio-poweroff";
		gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
	};

	gpio-restart {
		compatible = "gpio-restart";
		gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
		active-delay = <100>;
		inactive-delay = <10>;
		wait-delay = <100>;
	};

	power-gpio-keys {
		compatible = "gpio-keys";

		power-button {
			label = "Power button";
			gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
			linux,code = <KEY_POWER>;
		};
	};

	touch-lock-key {
		compatible = "gpio-keys";

		touch-lock-button {
			label = "Touch lock button";
			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_F12>;
		};
	};

	usbphy2: usbphy-2 {
		compatible = "usb-nop-xceiv";
		vcc-supply = <&reg_3v3>;
		reset-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>;
		clock-names = "main_clk";
		clock-frequency = <24000000>;
		clocks = <&clks IMX5_CLK_CKO2>;
		assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>;
		assigned-clock-parents = <&clks IMX5_CLK_OSC>;
	};

	usbphy3: usbphy-3 {
		compatible = "usb-nop-xceiv";
		vcc-supply = <&reg_3v3>;
		reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
		clock-names = "main_clk";

		clock-frequency = <24000000>;
		clocks = <&clks IMX5_CLK_CKO2>;
		assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>;
		assigned-clock-parents = <&clks IMX5_CLK_OSC>;
	};

	panel-lvds0 {
		compatible = "nvd,9128";
		power-supply = <&reg_3v3_lcd>;

		port {
			panel_in_lvds0: endpoint {
				remote-endpoint = <&lvds0_out>;
			};
		};
	};
};

&usbphy0 {
	vcc-supply = <&reg_3v3>;
};

&usbphy1 {
	vcc-supply = <&reg_3v3>;
};

&audmux {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_audmux>;
	status = "okay";
};

&cpu0 {
	/* CPU rated to 1GHz, not 1.2GHz as per the default settings */
	operating-points = <
		/* kHz   uV */
		166666  850000
		400000  900000
		800000  1050000
		1000000 1200000
	>;
};

&ecspi1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ecspi1>;
	cs-gpios = <&gpio5 17 GPIO_ACTIVE_LOW
		    &gpio4 10 GPIO_ACTIVE_LOW
		    &gpio4 11 GPIO_ACTIVE_LOW
		    &gpio4 12 GPIO_ACTIVE_LOW>;
	status = "okay";

	spidev0: spi@1 {
		compatible = "ge,achc", "nxp,kinetis-k20";
		reg = <1>, <0>;
		vdd-supply = <&reg_3v3>;
		vdda-supply = <&reg_3v3>;
		clocks = <&achc_24M>;
		reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
	};

	gpioxra0: gpio@2 {
		compatible = "exar,xra1403";
		reg = <2>;
		gpio-controller;
		#gpio-cells = <2>;
		spi-max-frequency = <1000000>;
	};

	gpioxra1: gpio@3 {
		compatible = "exar,xra1403";
		reg = <3>;
		gpio-controller;
		#gpio-cells = <2>;
		spi-max-frequency = <1000000>;
	};
};

&ecspi2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ecspi2>;
	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
	status = "okay";

	da9053@0 {
		compatible = "dlg,da9053-aa";
		reg = <0>;
		interrupt-parent = <&gpio3>;
		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
		spi-max-frequency = <1000000>;
		dlg,tsi-as-adc;
		tsiref-supply = <&reg_tsiref>;

		regulators {
			buck1_reg: buck1 {
				regulator-name = "BUCKCORE";
				regulator-min-microvolt = <500000>;
				regulator-max-microvolt = <2075000>;
				regulator-always-on;
			};

			buck2_reg: buck2 {
				regulator-name = "BUCKPRO";
				regulator-min-microvolt = <500000>;
				regulator-max-microvolt = <2075000>;
				regulator-always-on;
			};

			buck3_reg: buck3 {
				regulator-name = "BUCKMEM";
				regulator-min-microvolt = <925000>;
				regulator-max-microvolt = <2500000>;
				regulator-always-on;
			};

			buck4_reg: buck4 {
				regulator-name = "BUCKPERI";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3600000>;
				regulator-always-on;
			};

			ldo1_reg: ldo1 {
				regulator-name = "ldo1_1v3";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
			};

			ldo2_reg: ldo2 {
				regulator-name = "ldo2_1v3";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
			};

			ldo3_reg: ldo3 {
				regulator-name = "ldo3_3v3";
				regulator-min-microvolt = <1725000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			ldo4_reg: ldo4 {
				regulator-name = "ldo4_2v775";
				regulator-min-microvolt = <1725000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			ldo5_reg: ldo5 {
				regulator-name = "ldo5_3v3";
				regulator-min-microvolt = <1200000>;
				regulator-max-microvolt = <3600000>;
				regulator-always-on;
			};

			ldo6_reg: ldo6 {
				regulator-name = "ldo6_1v3";
				regulator-min-microvolt = <1200000>;
				regulator-max-microvolt = <3600000>;
				regulator-always-on;
			};

			ldo7_reg: ldo7 {
				regulator-name = "ldo7_2v75";
				regulator-min-microvolt = <1200000>;
				regulator-max-microvolt = <3600000>;
				regulator-always-on;
			};

			ldo8_reg: ldo8 {
				regulator-name = "ldo8_1v8";
				regulator-min-microvolt = <1200000>;
				regulator-max-microvolt = <3600000>;
				regulator-always-on;
			};

			ldo9_reg: ldo9 {
				regulator-name = "ldo9_1v5";
				regulator-min-microvolt = <1250000>;
				regulator-max-microvolt = <3650000>;
				regulator-always-on;
			};

			ldo10_reg: ldo10 {
				regulator-name = "ldo10_1v3";
				regulator-min-microvolt = <1200000>;
				regulator-max-microvolt = <3600000>;
				regulator-always-on;
			};
		};
	};

};

&esdhc3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_esdhc3>;
	bus-width = <8>;
	status = "okay";
};

&fec {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_fec>;
	phy-supply = <&reg_3v3>;
	phy-mode = "rmii";
	phy-reset-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&i2c1 {
	pinctrl-names = "default", "gpio";
	pinctrl-0 = <&pinctrl_i2c1>;
	pinctrl-1 = <&pinctrl_i2c1_gpio>;
	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
	status = "okay";

	i2c-mux@70 {
		compatible = "nxp,pca9547";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x70>;
		reset-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;

		i2c4: i2c@0 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0>;

			sgtl5000: codec@a {
				compatible = "fsl,sgtl5000";
				reg = <0xa>;
				#sound-dai-cells = <0>;
				VDDA-supply = <&reg_sgtl5k>;
				VDDIO-supply = <&reg_sgtl5k>;
				clocks = <&cko2_11M>;
				status = "okay";
			};
		};

		i2c5: i2c@1 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <1>;

			rtc@30 {
			       compatible = "sii,s35390a";
			       reg = <0x30>;
			};

			temp@48 {
				compatible = "ti,tmp112";
				reg = <0x48>;
			};

			mma8453q: accelerometer@1c {
				compatible = "fsl,mma8453";
				reg = <0x1c>;
				interrupt-parent = <&gpio1>;
				interrupts = <6 IRQ_TYPE_NONE>;
				interrupt-names = "INT1";
			};

			mpl3115: pressure-sensor@60 {
				compatible = "fsl,mpl3115";
				reg = <0x60>;
			};

			eeprom: eeprom@50 {
				compatible = "atmel,24c08";
				reg = <0x50>;
			};
		};

		i2c6: i2c@2 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <2>;
		};

		i2c7: i2c@3 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <3>;
		};

		i2c8: i2c@4 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <4>;
		};

		i2c9: i2c@5 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <5>;
		};

		i2c10: i2c@6 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <6>;
		};

		i2c11: i2c@7 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <7>;
		};
	};
};

&i2c2 {
	pinctrl-names = "default", "gpio";
	pinctrl-0 = <&pinctrl_i2c2>;
	pinctrl-1 = <&pinctrl_i2c2_gpio>;
	sda-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
	scl-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
	status = "okay";

	touchscreen@4b {
		compatible = "atmel,maxtouch";
		reset-gpio = <&gpio5 19 GPIO_ACTIVE_LOW>;
		reg = <0x4b>;
		interrupt-parent = <&gpio5>;
		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
	};
};

&i2c3 {
	pinctrl-names = "default", "gpio";
	pinctrl-0 = <&pinctrl_i2c3>;
	pinctrl-1 = <&pinctrl_i2c3_gpio>;
	sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
	scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
	status = "okay";
};

&ldb {
	status = "okay";

	lvds0: lvds-channel@0 {
		status = "okay";

		port@2 {
			lvds0_out: endpoint {
				remote-endpoint = <&panel_in_lvds0>;
			};
		};
	};
};

&pmu {
	secure-reg-access;
};

&pwm1 {
	#pwm-cells = <2>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm1>;
	status = "okay";
};

&pwm2 {
	#pwm-cells = <2>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm2>;
	status = "okay";
};

&ssi2 {
	status = "okay";
};

&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1>;
	status = "okay";
};

&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart2>;
	status = "okay";
};

&uart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart3>;
	uart-has-rtscts;
	status = "okay";
};

&uart4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart4>;
	status = "okay";
};

&uart5 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart5>;
	status = "okay";
};

&usbotg {
	dr_mode = "otg";
	phy_type = "utmi";
	vbus-supply = <&reg_usb_otg_vbus>;
	pinctrl-0 = <&pinctrl_usb_otg>;
	status = "okay";
};

&usbh1 {
	vbus-supply = <&reg_usb_vbus>;
	phy_type = "utmi";
	dr_mode = "host";
	status = "okay";
};

&usbh2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbh2>;
	phy_type = "ulpi";
	dr_mode = "host";
	fsl,usbphy = <&usbphy2>;
	vbus-supply = <&reg_usbh2_vbus>;
	status = "okay";
};

&usbh3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbh3>;
	phy_type = "ulpi";
	dr_mode = "host";
	vbus-supply = <&reg_usbh3_vbus>;
	fsl,usbphy = <&usbphy3>;
	status = "okay";
};

&iomuxc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hog_rev6>;

	pinctrl_audmux: audmuxgrp {
		fsl,pins = <
			MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD	0x400
			MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD	0x400
			MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC	0x400
			MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS	0x400
			MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC	0x400
			MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS	0x400
			MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD	0x400
			MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD	0x400
		>;
	};

	pinctrl_ecspi1: ecspi1grp {
		fsl,pins = <
			MX53_PAD_DISP0_DAT21__ECSPI1_MOSI	0x400
			MX53_PAD_DISP0_DAT22__ECSPI1_MISO	0x400
			MX53_PAD_DISP0_DAT20__ECSPI1_SCLK	0x400
			/* ECSPI1_SS0, must treat as GPIO for EzPort */
			MX53_PAD_DISP0_DAT23__GPIO5_17		0x400
			MX53_PAD_KEY_COL2__GPIO4_10		0x0
			MX53_PAD_KEY_ROW2__GPIO4_11		0x0
			MX53_PAD_KEY_COL3__GPIO4_12		0x0
		>;
	};

	pinctrl_ecspi2: ecspi2grp {
		fsl,pins = <
			MX53_PAD_EIM_CS1__ECSPI2_MOSI		0x0
			MX53_PAD_EIM_OE__ECSPI2_MISO		0x0
			MX53_PAD_EIM_CS0__ECSPI2_SCLK		0x0
			MX53_PAD_EIM_RW__GPIO2_26		0x0
		>;
	};

	pinctrl_esdhc1: esdhc1grp {
		fsl,pins = <
			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
		>;
	};

	pinctrl_esdhc3: esdhc3grp {
		fsl,pins = <
			MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
			MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
			MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
			MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
			MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
			MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
			MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
			MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
			MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
			MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
		>;
	};

	pinctrl_fec: fecgrp {
		fsl,pins = <
			MX53_PAD_FEC_MDC__FEC_MDC		0x0
			MX53_PAD_FEC_MDIO__FEC_MDIO		0x0
			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x0
			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x0
			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x0
			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x0
			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x0
			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x0
			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x0
			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x0
		>;
	};

	pinctrl_hog_rev6: hoggrp {
		fsl,pins = <
			/* CKO2 */
			MX53_PAD_GPIO_3__CCM_CLKO2		0x4
			/* DEFIB_SYNC_MARKER_IN_IRQ */
			MX53_PAD_GPIO_5__GPIO1_5		0x0
			/* ACCELEROMETER_DATA_RDY_N */
			MX53_PAD_GPIO_6__GPIO1_6		0x0
			/* TEMPERATURE_ALERT_N */
			MX53_PAD_GPIO_7__GPIO1_7		0x0
			/* BAROMETRIC_PRESSURE_DATA_RDY_N */
			MX53_PAD_GPIO_8__GPIO1_8		0x0
			/* DOCKING_I2C_INTERFACE_IRQ_N */
			MX53_PAD_PATA_DATA4__GPIO2_4		0x0
			/* PWR_OUT_TO_DOCK_FAULT_N */
			MX53_PAD_PATA_DATA5__GPIO2_5		0x0
			/* ENABLE_PWR_TO_DOCK_N */
			MX53_PAD_PATA_DATA6__GPIO2_6		0x0
			/* HOST_CONTROLLED_RESET_TO_DOCKING_CONNECTOR_N */
			MX53_PAD_PATA_DATA7__GPIO2_7		0x0
			/* REMOTE_ON_REQUEST_FROM_DOCKING_CONNECTOR_IS_ACTIVE_N */
			MX53_PAD_PATA_DATA12__GPIO2_12		0x0
			/* DOCK_PRESENT_N */
			MX53_PAD_PATA_DATA13__GPIO2_13		0x0
			/* ECG_MARKER_IN_FROM_DOCKING_CONNECTOR_IRQ */
			MX53_PAD_PATA_DATA14__GPIO2_14		0x0
			/* ENABLE_ECG_MARKER_INTERFACE_TO_DOCKING_CONNECTOR */
			MX53_PAD_PATA_DATA15__GPIO2_15		0x0
			/* RESET_IMX535_ETHERNET_PHY_N */
			MX53_PAD_EIM_A22__GPIO2_16		0x0
			/* ENABLE_PWR_TO_LCD_AND_UI_INTERFACE */
			MX53_PAD_EIM_A21__GPIO2_17		0x0
			/* RESET_I2C1_BUS_SEGMENT_MUX_N */
			MX53_PAD_EIM_A20__GPIO2_18		0x0
			/* RESET_IMX535_USB_HOST3_PHY_N */
			MX53_PAD_EIM_A19__GPIO2_19		0x0
			/* ESDHC3_EMMC_NAND_RST_N */
			MX53_PAD_EIM_A18__GPIO2_20		0x0
			/* LCD_AND_UI_INTERFACE_PWR_FAULT_N */
			MX53_PAD_EIM_A17__GPIO2_21		0x0
			/* POWER_DOWN_LVDS0_DESERIALIZER_N */
			MX53_PAD_EIM_A16__GPIO2_22		0x0
			/* POWER_DOWN_LVDS1_DESERIALIZER_N */
			MX53_PAD_EIM_LBA__GPIO2_27		0x0
			/* RESET_DP0_TRANSMITTER_N */
			MX53_PAD_EIM_EB0__GPIO2_28		0x0
			/* RESET_DP1_TRANSMITTER_N */
			MX53_PAD_EIM_EB1__GPIO2_29		0x0
			/* ENABLE_SPDIF_AUDIO_TO_DP0 */
			MX53_PAD_EIM_DA0__GPIO3_0		0x0
			/* ENABLE_SPDIF_AUDIO_TO_DP1 */
			MX53_PAD_EIM_DA1__GPIO3_1		0x0
			/* LVDS1_MUX_CTRL */
			MX53_PAD_EIM_DA2__GPIO3_2		0x0
			/* LVDS0_MUX_CTRL */
			MX53_PAD_EIM_DA3__GPIO3_3		0x0
			/* DP1_TRANSMITTER_IRQ */
			MX53_PAD_EIM_DA4__GPIO3_4		0x0
			/* DP0_TRANSMITTER_IRQ */
			MX53_PAD_EIM_DA5__GPIO3_5		0x0
			/* USB_RESET_N */
			MX53_PAD_EIM_DA6__GPIO3_6		0x0
			/* ENABLE_BATTERY_CHARGER */
			MX53_PAD_EIM_DA7__GPIO3_7		0x0
			/* SOFTWARE_CONTROLLED_PWR_CYCLE */
			MX53_PAD_EIM_DA8__GPIO3_8		0x0
			/* SOFTWARE_CONTROLLED_POWERDOWN */
			MX53_PAD_EIM_DA9__GPIO3_9		0x0
			/* DC_PWR_IN_OK */
			MX53_PAD_EIM_DA10__GPIO3_10		0x0
			/* BATT_PRESENT_N */
			MX53_PAD_EIM_DA11__GPIO3_11		0xe4
			/* PMIC_IRQ_N */
			MX53_PAD_EIM_DA12__GPIO3_12		0x0
			/* PMIC_VDD_FAULT_STATUS_N */
			MX53_PAD_EIM_DA13__GPIO3_13		0x0
			/* IMX535_ETHERNET_PHY_STATUS_IRQ_N */
			MX53_PAD_EIM_DA14__GPIO3_14		0x0
			/* NOT USED - AVAILABLE 3.3V GPIO */
			MX53_PAD_EIM_DA15__GPIO3_15		0x0
			/* NOT USED - AVAILABLE 3.3V GPIO */
			MX53_PAD_EIM_D22__GPIO3_22		0x0
			/* NOT USED - AVAILABLE 3.3V GPIO */
			MX53_PAD_EIM_D24__GPIO3_24		0x0
			/* NBP_PUMP_VALVE_PWR_ENABLE */
			MX53_PAD_EIM_D25__GPIO3_25		0x0
			/* NIBP_RESET_N */
			MX53_PAD_EIM_D26__GPIO3_26		0x0
			/* LATCHED_OVERPRESSURE_N */
			MX53_PAD_EIM_D27__GPIO3_27		0x0
			/* NBP_SBWTCLK */
			MX53_PAD_EIM_D29__GPIO3_29		0x0
			/* ENABLE_WIFI_MODULE */
			MX53_PAD_GPIO_11__GPIO4_1		0x400
			/* WIFI_MODULE_IRQ_N */
			MX53_PAD_GPIO_12__GPIO4_2		0x400
			/* ENABLE_BLUETOOTH_MODULE */
			MX53_PAD_GPIO_13__GPIO4_3		0x400
			/* RESET_IMX535_USB_HOST2_PHY_N */
			MX53_PAD_GPIO_14__GPIO4_4		0x400
			/* ONKEY_IS_DEPRESSED */
			MX53_PAD_KEY_ROW3__GPIO4_13		0x0
			/* UNUSED_GPIO_TO_ALARM_LIGHT_BOARD */
			MX53_PAD_EIM_WAIT__GPIO5_0		0x0
			/* DISPLAY_LOCK_BUTTON_IS_DEPRESSED_N */
			MX53_PAD_EIM_A25__GPIO5_2		0x0
			/* I2C_PCAP_TOUCHSCREEN_IRQ_N */
			MX53_PAD_EIM_A24__GPIO5_4		0x0
			/* NOT USED - AVAILABLE 1.8V GPIO */
			MX53_PAD_DISP0_DAT13__GPIO5_7		0x400
			/* NOT USED - AVAILABLE 1.8V GPIO */
			MX53_PAD_DISP0_DAT14__GPIO5_8		0x400
			/* NOT USED - AVAILABLE 1.8V GPIO */
			MX53_PAD_DISP0_DAT15__GPIO5_9		0x400
			/* HOST_CONTROLLED_RESET_TO_LCD_N */
			MX53_PAD_CSI0_PIXCLK__GPIO5_18		0x0
			/* HOST_CONTROLLED_RESET_TO_PCAP_N */
			MX53_PAD_CSI0_MCLK__GPIO5_19		0x0
			/* LR_SCAN_CTRL */
			MX53_PAD_CSI0_DATA_EN__GPIO5_20		0x0
			/* UD_SCAN_CTRL */
			MX53_PAD_CSI0_VSYNC__GPIO5_21		0x0
			/* DATA_WIDTH_CTRL */
			MX53_PAD_CSI0_DAT10__GPIO5_28		0x0
			/* BACKLIGHT_ENABLE */
			MX53_PAD_CSI0_DAT11__GPIO5_29		0x0
			/* MED_USB_PORT_1_HOST_SELECT */
			MX53_PAD_EIM_A23__GPIO6_6		0x0
			/* MED_USB_PORT_2_HOST_SELECT */
			MX53_PAD_NANDF_CLE__GPIO6_7		0x0
			/* MED_USB_PORT_3_HOST_SELECT */
			MX53_PAD_NANDF_ALE__GPIO6_8		0x0
			/* MED_USB_PORT_4_HOST_SELECT */
			MX53_PAD_NANDF_WP_B__GPIO6_9		0x0
			/* MED_USB_PORT_5_HOST_SELECT */
			MX53_PAD_NANDF_RB0__GPIO6_10		0x0
			/* MED_USB_PORT_6_HOST_SELECT */
			MX53_PAD_NANDF_CS0__GPIO6_11		0x0
			/* MED_USB_PORT_7_HOST_SELECT */
			MX53_PAD_NANDF_WE_B__GPIO6_12		0x0
			/* MED_USB_PORT_8_HOST_SELECT */
			MX53_PAD_NANDF_RE_B__GPIO6_13		0x0
			/* MED_USB_PORT_TO_IMX_SELECT_0 */
			MX53_PAD_NANDF_CS1__GPIO6_14		0x0
			/* MED_USB_PORT_TO_IMX_SELECT_1 */
			MX53_PAD_NANDF_CS2__GPIO6_15		0x0
			/* MED_USB_PORT_TO_IMX_SELECT_2 */
			MX53_PAD_NANDF_CS3__GPIO6_16		0x0
			/* POWER_AND_BOOT_STATUS_INDICATOR */
			MX53_PAD_PATA_INTRQ__GPIO7_2		0x1e4
			/* RUNNING_ON_BATTERY_INDICATOR_GREEN */
			MX53_PAD_GPIO_16__GPIO7_11		0x0
			/* BATTERY_STATUS_INDICATOR_AMBER */
			MX53_PAD_GPIO_17__GPIO7_12		0x0
		>;
	};

	pinctrl_i2c1: i2c1grp {
		fsl,pins = <
			MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
			MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
		>;
	};

	pinctrl_i2c1_gpio: i2c1gpiogrp {
		fsl,pins = <
			MX53_PAD_EIM_D28__GPIO3_28		0x1e4
			MX53_PAD_EIM_D21__GPIO3_21		0x1e4
		>;
	};

	pinctrl_i2c2: i2c2grp {
		fsl,pins = <
			MX53_PAD_EIM_EB2__I2C2_SCL		0x400001e4
			MX53_PAD_EIM_D16__I2C2_SDA		0x400001e4
		>;
	};

	pinctrl_i2c2_gpio: i2c2gpiogrp {
		fsl,pins = <
			MX53_PAD_EIM_D16__GPIO3_16		0x1e4
			MX53_PAD_EIM_EB2__GPIO2_30		0x1e4
		>;
	};

	pinctrl_i2c3: i2c3grp {
		fsl,pins = <
			MX53_PAD_EIM_D17__I2C3_SCL		0x400001e4
			MX53_PAD_EIM_D18__I2C3_SDA		0x400001e4
		>;
	};

	pinctrl_i2c3_gpio: i2c3gpiogrp {
		fsl,pins = <
			MX53_PAD_EIM_D18__GPIO3_18		0x1e4
			MX53_PAD_EIM_D17__GPIO3_17		0x1e4
		>;
	};

	pinctrl_pwm1: pwm1grp {
		fsl,pins = <
			MX53_PAD_GPIO_9__PWM1_PWMO		0x5
		>;
	};

	pinctrl_pwm2: pwm2grp {
		fsl,pins = <
			MX53_PAD_DISP0_DAT9__PWM2_PWMO		0x5
		>;
	};

	pinctrl_uart1: uart1grp {
		fsl,pins = <
			MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
			MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
		>;
	};

	pinctrl_uart2: uart2grp {
		fsl,pins = <
			MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
			MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
		>;
	};

	pinctrl_uart3: uart3grp {
		fsl,pins = <
			MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
			MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
			MX53_PAD_EIM_D23__UART3_CTS		0x1e4
			MX53_PAD_EIM_EB3__UART3_RTS		0x1e4
		>;
	};

	pinctrl_uart4: uart4grp {
		fsl,pins = <
			MX53_PAD_KEY_COL0__UART4_TXD_MUX	0x1e4
			MX53_PAD_KEY_ROW0__UART4_RXD_MUX	0x1e4
		>;
	};

	pinctrl_uart5: uart5grp {
		fsl,pins = <
			MX53_PAD_KEY_COL1__UART5_TXD_MUX	0x1e4
			MX53_PAD_KEY_ROW1__UART5_RXD_MUX	0x1e4
		>;
	};

	pinctrl_usb_otg_vbus: usb-otg-vbusgrp {
		fsl,pins = <
			/* USB_HS_OTG_VBUS_ENABLE */
			MX53_PAD_KEY_ROW4__GPIO4_15		0x1c4
		>;
	};

	pinctrl_usbh2: usbh2grp {
		fsl,pins = <
			/* USB H2 */
			MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 0x180
			MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 0x180
			MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 0x180
			MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 0x180
			MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 0x180
			MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 0x180
			MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 0x180
			MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 0x180
			MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP	 0x180
			MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT	 0x180
			MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK	 0x180
			MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR	 0x5
			MX53_PAD_EIM_D30__USBOH3_USBH2_OC	 0x180
		>;
	};

	pinctrl_usbh2_vbus: usbh2-vbusgrp {
		fsl,pins = <
			/* USB_HS_HOST2_VBUS_ENABLE */
			MX53_PAD_EIM_D31__GPIO3_31		0x0
		>;
	};

	pinctrl_usbh3_vbus: usbh3-vbusgrp {
		fsl,pins = <
			/* USB_HS_HOST3_VBUS_ENABLE */
			MX53_PAD_CSI0_DAT9__GPIO5_27		0x0
		>;
	};

	pinctrl_usbh3: usbh3grp {
		fsl,pins = <
			/* USB H3 */
			MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 0x180
			MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 0x180
			MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 0x180
			MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 0x180
			MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 0x180
			MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 0x180
			MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 0x180
			MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 0x180
			MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR	 0x5
			MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK	 0x180
			MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT	 0x180
			MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP	 0x180
			MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC	 0x180
		>;
	};

	pinctrl_usb_otg: usbotggrp {
		fsl,pins = <
			/* USB_OTG_FAULT_N */
			MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC	0x180
		>;
	};

	pinctrl_alarmled_pins: qmx6alarmledgrp {
		fsl,pins = <
			/* ACTIVATE_ALARM_LIGHT_RED */
			MX53_PAD_PATA_DIOR__GPIO7_3		0x0
			/* ACTIVATE_ALARM_LIGHT_YELLOW */
			MX53_PAD_PATA_DA_1__GPIO7_7		0x0
			/* ACTIVATE_ALARM_LIGHT_CYAN */
			MX53_PAD_PATA_DA_2__GPIO7_8		0x0
			/* AUDIO_ALARMS_SILENCED_INDICATOR */
			MX53_PAD_GPIO_18__GPIO7_13		0x0
		>;
	};
};