/* SPDX-License-Identifier: GPL-2.0 */
/* Copyright(c) 2009-2014 Realtek Corporation.*/
#ifndef __RTL8723BE_PHY_H__
#define __RTL8723BE_PHY_H__
/* MAX_TX_COUNT must always set to 4, otherwise read efuse table sequence
* will be wrong.
*/
#define MAX_TX_COUNT 4
#define TX_1S 0
#define TX_2S 1
#define TX_3S 2
#define TX_4S 3
#define MAX_POWER_INDEX 0x3F
#define MAX_PRECMD_CNT 16
#define MAX_RFDEPENDCMD_CNT 16
#define MAX_POSTCMD_CNT 16
#define MAX_DOZE_WAITING_TIMES_9x 64
#define RT_CANNOT_IO(hw) false
#define HIGHPOWER_RADIOA_ARRAYLEN 22
#define TARGET_CHNL_NUM_2G_5G 59
#define IQK_ADDA_REG_NUM 16
#define IQK_BB_REG_NUM 9
#define MAX_TOLERANCE 5
#define IQK_DELAY_TIME 10
#define index_mapping_NUM 15
#define APK_BB_REG_NUM 5
#define APK_AFE_REG_NUM 16
#define APK_CURVE_REG_NUM 4
#define PATH_NUM 1
#define LOOP_LIMIT 5
#define MAX_STALL_TIME 50
#define ANTENNADIVERSITYVALUE 0x80
#define MAX_TXPWR_IDX_NMODE_92S 63
#define RESET_CNT_LIMIT 3
#define IQK_ADDA_REG_NUM 16
#define IQK_MAC_REG_NUM 4
#define RF6052_MAX_PATH 2
#define CT_OFFSET_MAC_ADDR 0X16
#define CT_OFFSET_CCK_TX_PWR_IDX 0x5A
#define CT_OFFSET_HT401S_TX_PWR_IDX 0x60
#define CT_OFFSET_HT402S_TX_PWR_IDX_DIFF 0x66
#define CT_OFFSET_HT20_TX_PWR_IDX_DIFF 0x69
#define CT_OFFSET_OFDM_TX_PWR_IDX_DIFF 0x6C
#define CT_OFFSET_HT40_MAX_PWR_OFFSET 0x6F
#define CT_OFFSET_HT20_MAX_PWR_OFFSET 0x72
#define CT_OFFSET_CHANNEL_PLAH 0x75
#define CT_OFFSET_THERMAL_METER 0x78
#define CT_OFFSET_RF_OPTION 0x79
#define CT_OFFSET_VERSION 0x7E
#define CT_OFFSET_CUSTOMER_ID 0x7F
#define RTL92C_MAX_PATH_NUM 2
enum baseband_config_type {
BASEBAND_CONFIG_PHY_REG = 0,
BASEBAND_CONFIG_AGC_TAB = 1,
};
enum ant_div_type {
NO_ANTDIV = 0xFF,
CG_TRX_HW_ANTDIV = 0x01,
CGCS_RX_HW_ANTDIV = 0x02,
FIXED_HW_ANTDIV = 0x03,
CG_TRX_SMART_ANTDIV = 0x04,
CGCS_RX_SW_ANTDIV = 0x05,
};
u32 rtl8723be_phy_query_rf_reg(struct ieee80211_hw *hw,
enum radio_path rfpath,
u32 regaddr, u32 bitmask);
void rtl8723be_phy_set_rf_reg(struct ieee80211_hw *hw,
enum radio_path rfpath,
u32 regaddr, u32 bitmask, u32 data);
bool rtl8723be_phy_mac_config(struct ieee80211_hw *hw);
bool rtl8723be_phy_bb_config(struct ieee80211_hw *hw);
bool rtl8723be_phy_rf_config(struct ieee80211_hw *hw);
void rtl8723be_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw);
void rtl8723be_phy_set_txpower_level(struct ieee80211_hw *hw,
u8 channel);
void rtl8723be_phy_scan_operation_backup(struct ieee80211_hw *hw,
u8 operation);
void rtl8723be_phy_set_bw_mode_callback(struct ieee80211_hw *hw);
void rtl8723be_phy_set_bw_mode(struct ieee80211_hw *hw,
enum nl80211_channel_type ch_type);
void rtl8723be_phy_sw_chnl_callback(struct ieee80211_hw *hw);
u8 rtl8723be_phy_sw_chnl(struct ieee80211_hw *hw);
void rtl8723be_phy_iq_calibrate(struct ieee80211_hw *hw,
bool b_recovery);
void rtl8723be_phy_lc_calibrate(struct ieee80211_hw *hw);
void rtl8723be_phy_set_rfpath_switch(struct ieee80211_hw *hw, bool bmain);
bool rtl8723be_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
enum radio_path rfpath);
bool rtl8723be_phy_set_io_cmd(struct ieee80211_hw *hw, enum io_type iotype);
bool rtl8723be_phy_set_rf_power_state(struct ieee80211_hw *hw,
enum rf_pwrstate rfpwr_state);
#endif