Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 | /* * Common base for NXP LPC18xx and LPC43xx devices. * * Copyright 2015 Joachim Eastwood <manabian@gmail.com> * * This code is released using a dual license strategy: BSD/GPL * You can choose the licence that better fits your requirements. * * Released under the terms of 3-clause BSD License * Released under the terms of GNU General Public License Version 2.0 * */ #include "armv7-m.dtsi" #include "dt-bindings/clock/lpc18xx-cgu.h" #include "dt-bindings/clock/lpc18xx-ccu.h" #define LPC_PIN(port, pin) (0x##port * 32 + pin) #define LPC_GPIO(port, pin) (port * 32 + pin) / { #address-cells = <1>; #size-cells = <1>; cpus { #address-cells = <1>; #size-cells = <0>; cpu@0 { compatible = "arm,cortex-m3"; device_type = "cpu"; reg = <0x0>; clocks = <&ccu1 CLK_CPU_CORE>; }; }; clocks { xtal: xtal { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <12000000>; }; xtal32: xtal32 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; }; enet_rx_clk: enet_rx_clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; clock-output-names = "enet_rx_clk"; }; enet_tx_clk: enet_tx_clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; clock-output-names = "enet_tx_clk"; }; gp_clkin: gp_clkin { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; clock-output-names = "gp_clkin"; }; }; soc { sct_pwm: pwm@40000000 { compatible = "nxp,lpc1850-sct-pwm"; reg = <0x40000000 0x1000>; clocks =<&ccu1 CLK_CPU_SCT>; clock-names = "pwm"; resets = <&rgu 37>; #pwm-cells = <3>; status = "disabled"; }; dmac: dma-controller@40002000 { compatible = "arm,pl080", "arm,primecell"; arm,primecell-periphid = <0x00041080>; reg = <0x40002000 0x1000>; interrupts = <2>; clocks = <&ccu1 CLK_CPU_DMA>; clock-names = "apb_pclk"; resets = <&rgu 19>; #dma-cells = <2>; dma-channels = <8>; dma-requests = <16>; lli-bus-interface-ahb1; lli-bus-interface-ahb2; mem-bus-interface-ahb1; mem-bus-interface-ahb2; memcpy-burst-size = <256>; memcpy-bus-width = <32>; }; spifi: flash-controller@40003000 { compatible = "nxp,lpc1773-spifi"; reg = <0x40003000 0x1000>, <0x14000000 0x4000000>; reg-names = "spifi", "flash"; interrupts = <30>; clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>; clock-names = "spifi", "reg"; resets = <&rgu 53>; status = "disabled"; }; mmcsd: mmcsd@40004000 { compatible = "snps,dw-mshc"; reg = <0x40004000 0x1000>; interrupts = <6>; num-slots = <1>; clocks = <&ccu2 CLK_SDIO>, <&ccu1 CLK_CPU_SDIO>; clock-names = "ciu", "biu"; resets = <&rgu 20>; status = "disabled"; }; usb0: ehci@40006100 { compatible = "nxp,lpc1850-ehci", "generic-ehci"; reg = <0x40006100 0x100>; interrupts = <8>; clocks = <&ccu1 CLK_CPU_USB0>; resets = <&rgu 17>; phys = <&usb0_otg_phy>; phy-names = "usb"; has-transaction-translator; status = "disabled"; }; usb1: ehci@40007100 { compatible = "nxp,lpc1850-ehci", "generic-ehci"; reg = <0x40007100 0x100>; interrupts = <9>; clocks = <&ccu1 CLK_CPU_USB1>; resets = <&rgu 18>; status = "disabled"; }; emc: memory-controller@40005000 { compatible = "arm,pl172", "arm,primecell"; reg = <0x40005000 0x1000>; clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>; clock-names = "mpmcclk", "apb_pclk"; resets = <&rgu 21>; #address-cells = <2>; #size-cells = <1>; ranges = <0 0 0x1c000000 0x1000000 1 0 0x1d000000 0x1000000 2 0 0x1e000000 0x1000000 3 0 0x1f000000 0x1000000>; status = "disabled"; }; lcdc: lcd-controller@40008000 { compatible = "arm,pl111", "arm,primecell"; reg = <0x40008000 0x1000>; interrupts = <7>; interrupt-names = "combined"; clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>; clock-names = "clcdclk", "apb_pclk"; resets = <&rgu 16>; status = "disabled"; }; eeprom: eeprom@4000e000 { compatible = "nxp,lpc1857-eeprom"; reg = <0x4000e000 0x1000>, <0x20040000 0x4000>; reg-names = "reg", "mem"; clocks = <&ccu1 CLK_CPU_EEPROM>; clock-names = "eeprom"; resets = <&rgu 27>; interrupts = <4>; status = "disabled"; }; mac: ethernet@40010000 { compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac"; reg = <0x40010000 0x2000>; interrupts = <5>; interrupt-names = "macirq"; clocks = <&ccu1 CLK_CPU_ETHERNET>; clock-names = "stmmaceth"; resets = <&rgu 22>; reset-names = "stmmaceth"; rx-fifo-depth = <256>; tx-fifo-depth = <256>; snps,pbl = <4>; /* 32 (8x mode) */ snps,force_thresh_dma_mode; status = "disabled"; }; creg: syscon@40043000 { compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd"; reg = <0x40043000 0x1000>; clocks = <&ccu1 CLK_CPU_CREG>; resets = <&rgu 5>; creg_clk: clock-controller { compatible = "nxp,lpc1850-creg-clk"; clocks = <&xtal32>; #clock-cells = <1>; }; usb0_otg_phy: phy { compatible = "nxp,lpc1850-usb-otg-phy"; clocks = <&ccu1 CLK_USB0>; #phy-cells = <0>; }; dmamux: dma-mux { compatible = "nxp,lpc1850-dmamux"; #dma-cells = <3>; dma-requests = <64>; dma-masters = <&dmac>; }; }; rtc: rtc@40046000 { compatible = "nxp,lpc1850-rtc", "nxp,lpc1788-rtc"; reg = <0x40046000 0x1000>; interrupts = <47>; clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>; clock-names = "rtc", "reg"; }; cgu: clock-controller@40050000 { compatible = "nxp,lpc1850-cgu"; reg = <0x40050000 0x1000>; #clock-cells = <1>; clocks = <&xtal>, <&creg_clk 1>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>; }; ccu1: clock-controller@40051000 { compatible = "nxp,lpc1850-ccu"; reg = <0x40051000 0x1000>; #clock-cells = <1>; clocks = <&cgu BASE_APB3_CLK>, <&cgu BASE_APB1_CLK>, <&cgu BASE_SPIFI_CLK>, <&cgu BASE_CPU_CLK>, <&cgu BASE_PERIPH_CLK>, <&cgu BASE_USB0_CLK>, <&cgu BASE_USB1_CLK>, <&cgu BASE_SPI_CLK>; clock-names = "base_apb3_clk", "base_apb1_clk", "base_spifi_clk", "base_cpu_clk", "base_periph_clk", "base_usb0_clk", "base_usb1_clk", "base_spi_clk"; }; ccu2: clock-controller@40052000 { compatible = "nxp,lpc1850-ccu"; reg = <0x40052000 0x1000>; #clock-cells = <1>; clocks = <&cgu BASE_AUDIO_CLK>, <&cgu BASE_UART3_CLK>, <&cgu BASE_UART2_CLK>, <&cgu BASE_UART1_CLK>, <&cgu BASE_UART0_CLK>, <&cgu BASE_SSP1_CLK>, <&cgu BASE_SSP0_CLK>, <&cgu BASE_SDIO_CLK>; clock-names = "base_audio_clk", "base_uart3_clk", "base_uart2_clk", "base_uart1_clk", "base_uart0_clk", "base_ssp1_clk", "base_ssp0_clk", "base_sdio_clk"; }; rgu: reset-controller@40053000 { compatible = "nxp,lpc1850-rgu"; reg = <0x40053000 0x1000>; clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_BUS>; clock-names = "delay", "reg"; #reset-cells = <1>; }; watchdog@40080000 { compatible = "nxp,lpc1850-wwdt"; reg = <0x40080000 0x24>; interrupts = <49>; clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_WWDT>; clock-names = "wdtclk", "reg"; }; uart0: serial@40081000 { compatible = "nxp,lpc1850-uart", "ns16550a"; reg = <0x40081000 0x1000>; reg-shift = <2>; interrupts = <24>; clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>; clock-names = "uartclk", "reg"; resets = <&rgu 44>; dmas = <&dmamux 1 1 2 &dmamux 2 1 2 &dmamux 11 2 2 &dmamux 12 2 2>; dma-names = "tx", "rx", "tx", "rx"; status = "disabled"; }; uart1: serial@40082000 { compatible = "nxp,lpc1850-uart", "ns16550a"; reg = <0x40082000 0x1000>; reg-shift = <2>; interrupts = <25>; clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>; clock-names = "uartclk", "reg"; resets = <&rgu 45>; dmas = <&dmamux 3 1 2 &dmamux 4 1 2>; dma-names = "tx", "rx"; status = "disabled"; }; ssp0: spi@40083000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x40083000 0x1000>; interrupts = <22>; clocks = <&ccu2 CLK_APB0_SSP0>, <&ccu1 CLK_CPU_SSP0>; clock-names = "sspclk", "apb_pclk"; resets = <&rgu 50>; dmas = <&dmamux 9 0 2 &dmamux 10 0 2>; dma-names = "rx", "tx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; timer0: timer@40084000 { compatible = "nxp,lpc3220-timer"; reg = <0x40084000 0x1000>; interrupts = <12>; clocks = <&ccu1 CLK_CPU_TIMER0>; clock-names = "timerclk"; resets = <&rgu 32>; }; timer1: timer@40085000 { compatible = "nxp,lpc3220-timer"; reg = <0x40085000 0x1000>; interrupts = <13>; clocks = <&ccu1 CLK_CPU_TIMER1>; clock-names = "timerclk"; resets = <&rgu 33>; }; pinctrl: pinctrl@40086000 { compatible = "nxp,lpc1850-scu"; reg = <0x40086000 0x1000>; clocks = <&ccu1 CLK_CPU_SCU>; }; i2c0: i2c@400a1000 { compatible = "nxp,lpc1788-i2c"; reg = <0x400a1000 0x1000>; interrupts = <18>; clocks = <&ccu1 CLK_APB1_I2C0>; resets = <&rgu 48>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; can1: can@400a4000 { compatible = "bosch,c_can"; reg = <0x400a4000 0x1000>; interrupts = <43>; clocks = <&ccu1 CLK_APB1_CAN1>; resets = <&rgu 54>; status = "disabled"; }; uart2: serial@400c1000 { compatible = "nxp,lpc1850-uart", "ns16550a"; reg = <0x400c1000 0x1000>; reg-shift = <2>; interrupts = <26>; clocks = <&ccu2 CLK_APB2_UART2>, <&ccu1 CLK_CPU_UART2>; clock-names = "uartclk", "reg"; resets = <&rgu 46>; dmas = <&dmamux 5 1 2 &dmamux 6 1 2>; dma-names = "tx", "rx"; status = "disabled"; }; uart3: serial@400c2000 { compatible = "nxp,lpc1850-uart", "ns16550a"; reg = <0x400c2000 0x1000>; reg-shift = <2>; interrupts = <27>; clocks = <&ccu2 CLK_APB2_UART3>, <&ccu1 CLK_CPU_UART3>; clock-names = "uartclk", "reg"; resets = <&rgu 47>; dmas = <&dmamux 7 1 2 &dmamux 8 1 2 &dmamux 13 3 2 &dmamux 14 3 2>; dma-names = "tx", "rx", "rx", "tx"; status = "disabled"; }; timer2: timer@400c3000 { compatible = "nxp,lpc3220-timer"; reg = <0x400c3000 0x1000>; interrupts = <14>; clocks = <&ccu1 CLK_CPU_TIMER2>; clock-names = "timerclk"; resets = <&rgu 34>; }; timer3: timer@400c4000 { compatible = "nxp,lpc3220-timer"; reg = <0x400c4000 0x1000>; interrupts = <15>; clocks = <&ccu1 CLK_CPU_TIMER3>; clock-names = "timerclk"; resets = <&rgu 35>; }; ssp1: spi@400c5000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x400c5000 0x1000>; interrupts = <23>; clocks = <&ccu2 CLK_APB2_SSP1>, <&ccu1 CLK_CPU_SSP1>; clock-names = "sspclk", "apb_pclk"; resets = <&rgu 51>; dmas = <&dmamux 11 2 2 &dmamux 12 2 2 &dmamux 3 3 2 &dmamux 4 3 2 &dmamux 5 2 2 &dmamux 6 2 2 &dmamux 13 2 2 &dmamux 14 2 2>; dma-names = "rx", "tx", "tx", "rx", "tx", "rx", "rx", "tx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; i2c1: i2c@400e0000 { compatible = "nxp,lpc1788-i2c"; reg = <0x400e0000 0x1000>; interrupts = <19>; clocks = <&ccu1 CLK_APB3_I2C1>; resets = <&rgu 49>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; dac: dac@400e1000 { compatible = "nxp,lpc1850-dac"; reg = <0x400e1000 0x1000>; interrupts = <0>; clocks = <&ccu1 CLK_APB3_DAC>; resets = <&rgu 42>; status = "disabled"; }; can0: can@400e2000 { compatible = "bosch,c_can"; reg = <0x400e2000 0x1000>; interrupts = <51>; clocks = <&ccu1 CLK_APB3_CAN0>; resets = <&rgu 55>; status = "disabled"; }; adc0: adc@400e3000 { compatible = "nxp,lpc1850-adc"; reg = <0x400e3000 0x1000>; interrupts = <17>; clocks = <&ccu1 CLK_APB3_ADC0>; resets = <&rgu 40>; status = "disabled"; }; adc1: adc@400e4000 { compatible = "nxp,lpc1850-adc"; reg = <0x400e4000 0x1000>; interrupts = <21>; clocks = <&ccu1 CLK_APB3_ADC1>; resets = <&rgu 41>; status = "disabled"; }; gpio: gpio@400f4000 { compatible = "nxp,lpc1850-gpio"; reg = <0x400f4000 0x4000>; clocks = <&ccu1 CLK_CPU_GPIO>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pinctrl LPC_GPIO(0,0) LPC_PIN(0,0) 2>, <&pinctrl LPC_GPIO(0,4) LPC_PIN(1,0) 1>, <&pinctrl LPC_GPIO(0,8) LPC_PIN(1,1) 4>, <&pinctrl LPC_GPIO(1,8) LPC_PIN(1,5) 2>, <&pinctrl LPC_GPIO(1,0) LPC_PIN(1,7) 8>, <&pinctrl LPC_GPIO(0,2) LPC_PIN(1,15) 2>, <&pinctrl LPC_GPIO(0,12) LPC_PIN(1,17) 2>, <&pinctrl LPC_GPIO(0,15) LPC_PIN(1,20) 1>, <&pinctrl LPC_GPIO(5,0) LPC_PIN(2,0) 7>, <&pinctrl LPC_GPIO(0,7) LPC_PIN(2,7) 1>, <&pinctrl LPC_GPIO(5,7) LPC_PIN(2,8) 1>, <&pinctrl LPC_GPIO(1,10) LPC_PIN(2,9) 1>, <&pinctrl LPC_GPIO(0,14) LPC_PIN(2,10) 1>, <&pinctrl LPC_GPIO(1,11) LPC_PIN(2,11) 3>, <&pinctrl LPC_GPIO(5,8) LPC_PIN(3,1) 2>, <&pinctrl LPC_GPIO(1,14) LPC_PIN(3,4) 2>, <&pinctrl LPC_GPIO(0,6) LPC_PIN(3,6) 1>, <&pinctrl LPC_GPIO(5,10) LPC_PIN(3,7) 2>, <&pinctrl LPC_GPIO(2,0) LPC_PIN(4,0) 7>, <&pinctrl LPC_GPIO(5,12) LPC_PIN(4,8) 3>, <&pinctrl LPC_GPIO(2,9) LPC_PIN(5,0) 7>, <&pinctrl LPC_GPIO(2,7) LPC_PIN(5,7) 1>, <&pinctrl LPC_GPIO(3,0) LPC_PIN(6,1) 5>, <&pinctrl LPC_GPIO(0,5) LPC_PIN(6,6) 1>, <&pinctrl LPC_GPIO(5,15) LPC_PIN(6,7) 2>, <&pinctrl LPC_GPIO(3,5) LPC_PIN(6,9) 3>, <&pinctrl LPC_GPIO(2,8) LPC_PIN(6,12) 1>, <&pinctrl LPC_GPIO(3,8) LPC_PIN(7,0) 8>, <&pinctrl LPC_GPIO(4,0) LPC_PIN(8,0) 8>, <&pinctrl LPC_GPIO(4,12) LPC_PIN(9,0) 4>, <&pinctrl LPC_GPIO(5,17) LPC_PIN(9,4) 2>, <&pinctrl LPC_GPIO(4,11) LPC_PIN(9,6) 1>, <&pinctrl LPC_GPIO(4,8) LPC_PIN(a,1) 3>, <&pinctrl LPC_GPIO(5,19) LPC_PIN(a,4) 1>, <&pinctrl LPC_GPIO(5,20) LPC_PIN(b,0) 7>, <&pinctrl LPC_GPIO(6,0) LPC_PIN(c,1) 14>, <&pinctrl LPC_GPIO(6,14) LPC_PIN(d,0) 17>, <&pinctrl LPC_GPIO(7,0) LPC_PIN(e,0) 16>, <&pinctrl LPC_GPIO(7,16) LPC_PIN(f,1) 3>, <&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5) 7>; }; }; }; |