Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 | /* * Copyright 2013 Crystalfontz America, Inc. * Free Electrons * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License * Version 2 or later at the following locations: * * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ /* * The CFA-10055 is an expansion board for the CFA-10036 module and * CFA-10037, thus we need to include the CFA-10037 DTS. */ #include "imx28-cfa10037.dts" / { model = "Crystalfontz CFA-10055 Board"; compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28"; apb@80000000 { apbh@80000000 { pinctrl@80018000 { spi2_pins_cfa10055: spi2-cfa10055@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_SSP2_SCK__GPIO_2_16 MX28_PAD_SSP2_MOSI__GPIO_2_17 MX28_PAD_SSP2_MISO__GPIO_2_18 MX28_PAD_AUART1_TX__GPIO_3_5 >; fsl,drive-strength = <MXS_DRIVE_8mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_ENABLE>; }; lcdif_18bit_pins_cfa10055: lcdif-18bit@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_LCD_D00__LCD_D0 MX28_PAD_LCD_D01__LCD_D1 MX28_PAD_LCD_D02__LCD_D2 MX28_PAD_LCD_D03__LCD_D3 MX28_PAD_LCD_D04__LCD_D4 MX28_PAD_LCD_D05__LCD_D5 MX28_PAD_LCD_D06__LCD_D6 MX28_PAD_LCD_D07__LCD_D7 MX28_PAD_LCD_D08__LCD_D8 MX28_PAD_LCD_D09__LCD_D9 MX28_PAD_LCD_D10__LCD_D10 MX28_PAD_LCD_D11__LCD_D11 MX28_PAD_LCD_D12__LCD_D12 MX28_PAD_LCD_D13__LCD_D13 MX28_PAD_LCD_D14__LCD_D14 MX28_PAD_LCD_D15__LCD_D15 MX28_PAD_LCD_D16__LCD_D16 MX28_PAD_LCD_D17__LCD_D17 >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_pins_cfa10055: lcdif-evk@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_LCD_RD_E__LCD_VSYNC MX28_PAD_LCD_WR_RWN__LCD_HSYNC MX28_PAD_LCD_RS__LCD_DOTCLK MX28_PAD_LCD_CS__LCD_ENABLE >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_LCD_RESET__GPIO_3_30 >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_ENABLE>; }; }; lcdif@80030000 { pinctrl-names = "default"; pinctrl-0 = <&lcdif_18bit_pins_cfa10055 &lcdif_pins_cfa10055 &lcdif_pins_cfa10055_pullup>; display = <&display0>; status = "okay"; display0: display0 { bits-per-pixel = <32>; bus-width = <18>; display-timings { native-mode = <&timing0>; timing0: timing0 { clock-frequency = <9216000>; hactive = <320>; vactive = <480>; hback-porch = <2>; hfront-porch = <2>; vback-porch = <2>; vfront-porch = <2>; hsync-len = <15>; vsync-len = <15>; hsync-active = <0>; vsync-active = <0>; de-active = <1>; pixelclk-active = <1>; }; }; }; }; }; apbx@80040000 { lradc@80050000 { fsl,lradc-touchscreen-wires = <4>; status = "okay"; }; pwm: pwm@80064000 { pinctrl-names = "default"; pinctrl-0 = <&pwm3_pins_b>; status = "okay"; }; }; }; spi2 { compatible = "spi-gpio"; pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_cfa10055>; status = "okay"; gpio-sck = <&gpio2 16 0>; gpio-mosi = <&gpio2 17 0>; gpio-miso = <&gpio2 18 0>; cs-gpios = <&gpio3 5 0>; num-chipselects = <1>; #address-cells = <1>; #size-cells = <0>; hx8357: hx8357@0 { compatible = "himax,hx8357b", "himax,hx8357"; reg = <0>; spi-max-frequency = <100000>; spi-cpol; spi-cpha; gpios-reset = <&gpio3 30 0>; }; }; backlight { compatible = "pwm-backlight"; pwms = <&pwm 3 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; }; }; |