Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 | /* * FB driver for the ILI9341 LCD display controller * * This display uses 9-bit SPI: Data/Command bit + 8 data bits * For platforms that doesn't support 9-bit, the driver is capable * of emulating this using 8-bit transfer. * This is done by transferring eight 9-bit words in 9 bytes. * * Copyright (C) 2013 Christian Vogelgsang * Based on adafruit22fb.c by Noralf Tronnes * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> #include <video/mipi_display.h> #include "fbtft.h" #define DRVNAME "fb_ili9341" #define WIDTH 240 #define HEIGHT 320 #define TXBUFLEN (4 * PAGE_SIZE) #define DEFAULT_GAMMA "1F 1A 18 0A 0F 06 45 87 32 0A 07 02 07 05 00\n" \ "00 25 27 05 10 09 3A 78 4D 05 18 0D 38 3A 1F" static int init_display(struct fbtft_par *par) { par->fbtftops.reset(par); /* startup sequence for MI0283QT-9A */ write_reg(par, MIPI_DCS_SOFT_RESET); mdelay(5); write_reg(par, MIPI_DCS_SET_DISPLAY_OFF); /* --------------------------------------------------------- */ write_reg(par, 0xCF, 0x00, 0x83, 0x30); write_reg(par, 0xED, 0x64, 0x03, 0x12, 0x81); write_reg(par, 0xE8, 0x85, 0x01, 0x79); write_reg(par, 0xCB, 0x39, 0X2C, 0x00, 0x34, 0x02); write_reg(par, 0xF7, 0x20); write_reg(par, 0xEA, 0x00, 0x00); /* ------------power control-------------------------------- */ write_reg(par, 0xC0, 0x26); write_reg(par, 0xC1, 0x11); /* ------------VCOM --------- */ write_reg(par, 0xC5, 0x35, 0x3E); write_reg(par, 0xC7, 0xBE); /* ------------memory access control------------------------ */ write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, 0x55); /* 16bit pixel */ /* ------------frame rate----------------------------------- */ write_reg(par, 0xB1, 0x00, 0x1B); /* ------------Gamma---------------------------------------- */ /* write_reg(par, 0xF2, 0x08); */ /* Gamma Function Disable */ write_reg(par, MIPI_DCS_SET_GAMMA_CURVE, 0x01); /* ------------display-------------------------------------- */ write_reg(par, 0xB7, 0x07); /* entry mode set */ write_reg(par, 0xB6, 0x0A, 0x82, 0x27, 0x00); write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE); mdelay(100); write_reg(par, MIPI_DCS_SET_DISPLAY_ON); mdelay(20); return 0; } static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) { write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS, (xs >> 8) & 0xFF, xs & 0xFF, (xe >> 8) & 0xFF, xe & 0xFF); write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS, (ys >> 8) & 0xFF, ys & 0xFF, (ye >> 8) & 0xFF, ye & 0xFF); write_reg(par, MIPI_DCS_WRITE_MEMORY_START); } #define MEM_Y BIT(7) /* MY row address order */ #define MEM_X BIT(6) /* MX column address order */ #define MEM_V BIT(5) /* MV row / column exchange */ #define MEM_L BIT(4) /* ML vertical refresh order */ #define MEM_H BIT(2) /* MH horizontal refresh order */ #define MEM_BGR (3) /* RGB-BGR Order */ static int set_var(struct fbtft_par *par) { switch (par->info->var.rotate) { case 0: write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, MEM_X | (par->bgr << MEM_BGR)); break; case 270: write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, MEM_V | MEM_L | (par->bgr << MEM_BGR)); break; case 180: write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, MEM_Y | (par->bgr << MEM_BGR)); break; case 90: write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, MEM_Y | MEM_X | MEM_V | (par->bgr << MEM_BGR)); break; } return 0; } /* * Gamma string format: * Positive: Par1 Par2 [...] Par15 * Negative: Par1 Par2 [...] Par15 */ #define CURVE(num, idx) curves[num * par->gamma.num_values + idx] static int set_gamma(struct fbtft_par *par, unsigned long *curves) { int i; for (i = 0; i < par->gamma.num_curves; i++) write_reg(par, 0xE0 + i, CURVE(i, 0), CURVE(i, 1), CURVE(i, 2), CURVE(i, 3), CURVE(i, 4), CURVE(i, 5), CURVE(i, 6), CURVE(i, 7), CURVE(i, 8), CURVE(i, 9), CURVE(i, 10), CURVE(i, 11), CURVE(i, 12), CURVE(i, 13), CURVE(i, 14)); return 0; } #undef CURVE static struct fbtft_display display = { .regwidth = 8, .width = WIDTH, .height = HEIGHT, .txbuflen = TXBUFLEN, .gamma_num = 2, .gamma_len = 15, .gamma = DEFAULT_GAMMA, .fbtftops = { .init_display = init_display, .set_addr_win = set_addr_win, .set_var = set_var, .set_gamma = set_gamma, }, }; FBTFT_REGISTER_DRIVER(DRVNAME, "ilitek,ili9341", &display); MODULE_ALIAS("spi:" DRVNAME); MODULE_ALIAS("platform:" DRVNAME); MODULE_ALIAS("spi:ili9341"); MODULE_ALIAS("platform:ili9341"); MODULE_DESCRIPTION("FB driver for the ILI9341 LCD display controller"); MODULE_AUTHOR("Christian Vogelgsang"); MODULE_LICENSE("GPL"); |