Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 | /* * FB driver for the uPD161704 LCD Controller * * Copyright (C) 2014 Seong-Woo Kim * * Based on fb_ili9325.c by Noralf Tronnes * Based on ili9325.c by Jeroen Domburg * Init code from UTFT library by Henning Karlsen * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/gpio.h> #include <linux/delay.h> #include "fbtft.h" #define DRVNAME "fb_upd161704" #define WIDTH 240 #define HEIGHT 320 #define BPP 16 static int init_display(struct fbtft_par *par) { par->fbtftops.reset(par); if (par->gpio.cs != -1) gpio_set_value(par->gpio.cs, 0); /* Activate chip */ /* Initialization sequence from Lib_UTFT */ /* register reset */ write_reg(par, 0x0003, 0x0001); /* Soft reset */ /* oscillator start */ write_reg(par, 0x003A, 0x0001); /*Oscillator 0: stop, 1: operation */ udelay(100); /* y-setting */ write_reg(par, 0x0024, 0x007B); /* amplitude setting */ udelay(10); write_reg(par, 0x0025, 0x003B); /* amplitude setting */ write_reg(par, 0x0026, 0x0034); /* amplitude setting */ udelay(10); write_reg(par, 0x0027, 0x0004); /* amplitude setting */ write_reg(par, 0x0052, 0x0025); /* circuit setting 1 */ udelay(10); write_reg(par, 0x0053, 0x0033); /* circuit setting 2 */ write_reg(par, 0x0061, 0x001C); /* adjustment V10 positive polarity */ udelay(10); write_reg(par, 0x0062, 0x002C); /* adjustment V9 negative polarity */ write_reg(par, 0x0063, 0x0022); /* adjustment V34 positive polarity */ udelay(10); write_reg(par, 0x0064, 0x0027); /* adjustment V31 negative polarity */ udelay(10); write_reg(par, 0x0065, 0x0014); /* adjustment V61 negative polarity */ udelay(10); write_reg(par, 0x0066, 0x0010); /* adjustment V61 negative polarity */ /* Basical clock for 1 line (BASECOUNT[7:0]) number specified */ write_reg(par, 0x002E, 0x002D); /* Power supply setting */ write_reg(par, 0x0019, 0x0000); /* DC/DC output setting */ udelay(200); write_reg(par, 0x001A, 0x1000); /* DC/DC frequency setting */ write_reg(par, 0x001B, 0x0023); /* DC/DC rising setting */ write_reg(par, 0x001C, 0x0C01); /* Regulator voltage setting */ write_reg(par, 0x001D, 0x0000); /* Regulator current setting */ write_reg(par, 0x001E, 0x0009); /* VCOM output setting */ write_reg(par, 0x001F, 0x0035); /* VCOM amplitude setting */ write_reg(par, 0x0020, 0x0015); /* VCOMM cencter setting */ write_reg(par, 0x0018, 0x1E7B); /* DC/DC operation setting */ /* windows setting */ write_reg(par, 0x0008, 0x0000); /* Minimum X address */ write_reg(par, 0x0009, 0x00EF); /* Maximum X address */ write_reg(par, 0x000a, 0x0000); /* Minimum Y address */ write_reg(par, 0x000b, 0x013F); /* Maximum Y address */ /* LCD display area setting */ write_reg(par, 0x0029, 0x0000); /* [LCDSIZE] X MIN. size set */ write_reg(par, 0x002A, 0x0000); /* [LCDSIZE] Y MIN. size set */ write_reg(par, 0x002B, 0x00EF); /* [LCDSIZE] X MAX. size set */ write_reg(par, 0x002C, 0x013F); /* [LCDSIZE] Y MAX. size set */ /* Gate scan setting */ write_reg(par, 0x0032, 0x0002); /* n line inversion line number */ write_reg(par, 0x0033, 0x0000); /* Line inversion/frame inversion/interlace setting */ write_reg(par, 0x0037, 0x0000); /* Gate scan operation setting register */ write_reg(par, 0x003B, 0x0001); /* Color mode */ /*GS = 0: 260-k color (64 gray scale), GS = 1: 8 color (2 gray scale) */ write_reg(par, 0x0004, 0x0000); /* RAM control register */ write_reg(par, 0x0005, 0x0000); /*Window access 00:Normal, 10:Window */ /* Display setting register 2 */ write_reg(par, 0x0001, 0x0000); /* display setting */ write_reg(par, 0x0000, 0x0000); /* display on */ return 0; } static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) { switch (par->info->var.rotate) { /* R20h = Horizontal GRAM Start Address */ /* R21h = Vertical GRAM Start Address */ case 0: write_reg(par, 0x0006, xs); write_reg(par, 0x0007, ys); break; case 180: write_reg(par, 0x0006, WIDTH - 1 - xs); write_reg(par, 0x0007, HEIGHT - 1 - ys); break; case 270: write_reg(par, 0x0006, WIDTH - 1 - ys); write_reg(par, 0x0007, xs); break; case 90: write_reg(par, 0x0006, ys); write_reg(par, 0x0007, HEIGHT - 1 - xs); break; } write_reg(par, 0x0e); /* Write Data to GRAM */ } static int set_var(struct fbtft_par *par) { switch (par->info->var.rotate) { /* AM: GRAM update direction */ case 0: write_reg(par, 0x01, 0x0000); write_reg(par, 0x05, 0x0000); break; case 180: write_reg(par, 0x01, 0x00C0); write_reg(par, 0x05, 0x0000); break; case 270: write_reg(par, 0x01, 0x0080); write_reg(par, 0x05, 0x0001); break; case 90: write_reg(par, 0x01, 0x0040); write_reg(par, 0x05, 0x0001); break; } return 0; } static struct fbtft_display display = { .regwidth = 16, .width = WIDTH, .height = HEIGHT, .fbtftops = { .init_display = init_display, .set_addr_win = set_addr_win, .set_var = set_var, }, }; FBTFT_REGISTER_DRIVER(DRVNAME, "nec,upd161704", &display); MODULE_ALIAS("spi:" DRVNAME); MODULE_ALIAS("platform:" DRVNAME); MODULE_ALIAS("spi:upd161704"); MODULE_ALIAS("platform:upd161704"); MODULE_DESCRIPTION("FB driver for the uPD161704 LCD Controller"); MODULE_AUTHOR("Seong-Woo Kim"); MODULE_LICENSE("GPL"); |