Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 | #ifndef __CVMX_CONFIG_H__ #define __CVMX_CONFIG_H__ /************************* Config Specific Defines ************************/ #define CVMX_LLM_NUM_PORTS 1 #define CVMX_NULL_POINTER_PROTECT 1 #define CVMX_ENABLE_DEBUG_PRINTS 1 /* PKO queues per port for interface 0 (ports 0-15) */ #define CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 1 /* PKO queues per port for interface 1 (ports 16-31) */ #define CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 1 /* Limit on the number of PKO ports enabled for interface 0 */ #define CVMX_PKO_MAX_PORTS_INTERFACE0 CVMX_HELPER_PKO_MAX_PORTS_INTERFACE0 /* Limit on the number of PKO ports enabled for interface 1 */ #define CVMX_PKO_MAX_PORTS_INTERFACE1 CVMX_HELPER_PKO_MAX_PORTS_INTERFACE1 /* PKO queues per port for PCI (ports 32-35) */ #define CVMX_PKO_QUEUES_PER_PORT_PCI 1 /* PKO queues per port for Loop devices (ports 36-39) */ #define CVMX_PKO_QUEUES_PER_PORT_LOOP 1 /************************* FPA allocation *********************************/ /* Pool sizes in bytes, must be multiple of a cache line */ #define CVMX_FPA_POOL_0_SIZE (16 * CVMX_CACHE_LINE_SIZE) #define CVMX_FPA_POOL_1_SIZE (1 * CVMX_CACHE_LINE_SIZE) #define CVMX_FPA_POOL_2_SIZE (8 * CVMX_CACHE_LINE_SIZE) #define CVMX_FPA_POOL_3_SIZE (0 * CVMX_CACHE_LINE_SIZE) #define CVMX_FPA_POOL_4_SIZE (0 * CVMX_CACHE_LINE_SIZE) #define CVMX_FPA_POOL_5_SIZE (0 * CVMX_CACHE_LINE_SIZE) #define CVMX_FPA_POOL_6_SIZE (0 * CVMX_CACHE_LINE_SIZE) #define CVMX_FPA_POOL_7_SIZE (0 * CVMX_CACHE_LINE_SIZE) /* Pools in use */ /* Packet buffers */ #define CVMX_FPA_PACKET_POOL (0) #define CVMX_FPA_PACKET_POOL_SIZE CVMX_FPA_POOL_0_SIZE /* Work queue entries */ #define CVMX_FPA_WQE_POOL (1) #define CVMX_FPA_WQE_POOL_SIZE CVMX_FPA_POOL_1_SIZE /* PKO queue command buffers */ #define CVMX_FPA_OUTPUT_BUFFER_POOL (2) #define CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE CVMX_FPA_POOL_2_SIZE /************************* FAU allocation ********************************/ /* The fetch and add registers are allocated here. They are arranged * in order of descending size so that all alignment constraints are * automatically met. The enums are linked so that the following enum * continues allocating where the previous one left off, so the * numbering within each enum always starts with zero. The macros * take care of the address increment size, so the values entered * always increase by 1. FAU registers are accessed with byte * addresses. */ #define CVMX_FAU_REG_64_ADDR(x) ((x << 3) + CVMX_FAU_REG_64_START) typedef enum { CVMX_FAU_REG_64_START = 0, CVMX_FAU_REG_64_END = CVMX_FAU_REG_64_ADDR(0), } cvmx_fau_reg_64_t; #define CVMX_FAU_REG_32_ADDR(x) ((x << 2) + CVMX_FAU_REG_32_START) typedef enum { CVMX_FAU_REG_32_START = CVMX_FAU_REG_64_END, CVMX_FAU_REG_32_END = CVMX_FAU_REG_32_ADDR(0), } cvmx_fau_reg_32_t; #define CVMX_FAU_REG_16_ADDR(x) ((x << 1) + CVMX_FAU_REG_16_START) typedef enum { CVMX_FAU_REG_16_START = CVMX_FAU_REG_32_END, CVMX_FAU_REG_16_END = CVMX_FAU_REG_16_ADDR(0), } cvmx_fau_reg_16_t; #define CVMX_FAU_REG_8_ADDR(x) ((x) + CVMX_FAU_REG_8_START) typedef enum { CVMX_FAU_REG_8_START = CVMX_FAU_REG_16_END, CVMX_FAU_REG_8_END = CVMX_FAU_REG_8_ADDR(0), } cvmx_fau_reg_8_t; /* * The name CVMX_FAU_REG_AVAIL_BASE is provided to indicate the first * available FAU address that is not allocated in cvmx-config.h. This * is 64 bit aligned. */ #define CVMX_FAU_REG_AVAIL_BASE ((CVMX_FAU_REG_8_END + 0x7) & (~0x7ULL)) #define CVMX_FAU_REG_END (2048) /********************** scratch memory allocation *************************/ /* Scratchpad memory allocation. Note that these are byte memory * addresses. Some uses of scratchpad (IOBDMA for example) require * the use of 8-byte aligned addresses, so proper alignment needs to * be taken into account. */ /* Generic scratch iobdma area */ #define CVMX_SCR_SCRATCH (0) /* First location available after cvmx-config.h allocated region. */ #define CVMX_SCR_REG_AVAIL_BASE (8) /* * CVMX_HELPER_FIRST_MBUFF_SKIP is the number of bytes to reserve * before the beginning of the packet. If necessary, override the * default here. See the IPD section of the hardware manual for MBUFF * SKIP details. */ #define CVMX_HELPER_FIRST_MBUFF_SKIP 184 /* * CVMX_HELPER_NOT_FIRST_MBUFF_SKIP is the number of bytes to reserve * in each chained packet element. If necessary, override the default * here. */ #define CVMX_HELPER_NOT_FIRST_MBUFF_SKIP 0 /* * CVMX_HELPER_ENABLE_BACK_PRESSURE controls whether back pressure is * enabled for all input ports. This controls if IPD sends * backpressure to all ports if Octeon's FPA pools don't have enough * packet or work queue entries. Even when this is off, it is still * possible to get backpressure from individual hardware ports. When * configuring backpressure, also check * CVMX_HELPER_DISABLE_*_BACKPRESSURE below. If necessary, override * the default here. */ #define CVMX_HELPER_ENABLE_BACK_PRESSURE 1 /* * CVMX_HELPER_ENABLE_IPD controls if the IPD is enabled in the helper * function. Once it is enabled the hardware starts accepting * packets. You might want to skip the IPD enable if configuration * changes are need from the default helper setup. If necessary, * override the default here. */ #define CVMX_HELPER_ENABLE_IPD 0 /* * CVMX_HELPER_INPUT_TAG_TYPE selects the type of tag that the IPD assigns * to incoming packets. */ #define CVMX_HELPER_INPUT_TAG_TYPE CVMX_POW_TAG_TYPE_ORDERED #define CVMX_ENABLE_PARAMETER_CHECKING 0 /* * The following select which fields are used by the PIP to generate * the tag on INPUT * 0: don't include * 1: include */ #define CVMX_HELPER_INPUT_TAG_IPV6_SRC_IP 0 #define CVMX_HELPER_INPUT_TAG_IPV6_DST_IP 0 #define CVMX_HELPER_INPUT_TAG_IPV6_SRC_PORT 0 #define CVMX_HELPER_INPUT_TAG_IPV6_DST_PORT 0 #define CVMX_HELPER_INPUT_TAG_IPV6_NEXT_HEADER 0 #define CVMX_HELPER_INPUT_TAG_IPV4_SRC_IP 0 #define CVMX_HELPER_INPUT_TAG_IPV4_DST_IP 0 #define CVMX_HELPER_INPUT_TAG_IPV4_SRC_PORT 0 #define CVMX_HELPER_INPUT_TAG_IPV4_DST_PORT 0 #define CVMX_HELPER_INPUT_TAG_IPV4_PROTOCOL 0 #define CVMX_HELPER_INPUT_TAG_INPUT_PORT 1 /* Select skip mode for input ports */ #define CVMX_HELPER_INPUT_PORT_SKIP_MODE CVMX_PIP_PORT_CFG_MODE_SKIPL2 /* * Force backpressure to be disabled. This overrides all other * backpressure configuration. */ #define CVMX_HELPER_DISABLE_RGMII_BACKPRESSURE 0 #endif /* __CVMX_CONFIG_H__ */ |