Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 | /* * This header file contains public constants and structures used by * both the SCSI initiator and the SCSI target code. * * For documentation on the OPCODES, MESSAGES, and SENSE values, * please consult the SCSI standard. */ #ifndef _SCSI_PROTO_H_ #define _SCSI_PROTO_H_ #include <linux/types.h> /* * SCSI opcodes */ #define TEST_UNIT_READY 0x00 #define REZERO_UNIT 0x01 #define REQUEST_SENSE 0x03 #define FORMAT_UNIT 0x04 #define READ_BLOCK_LIMITS 0x05 #define REASSIGN_BLOCKS 0x07 #define INITIALIZE_ELEMENT_STATUS 0x07 #define READ_6 0x08 #define WRITE_6 0x0a #define SEEK_6 0x0b #define READ_REVERSE 0x0f #define WRITE_FILEMARKS 0x10 #define SPACE 0x11 #define INQUIRY 0x12 #define RECOVER_BUFFERED_DATA 0x14 #define MODE_SELECT 0x15 #define RESERVE 0x16 #define RELEASE 0x17 #define COPY 0x18 #define ERASE 0x19 #define MODE_SENSE 0x1a #define START_STOP 0x1b #define RECEIVE_DIAGNOSTIC 0x1c #define SEND_DIAGNOSTIC 0x1d #define ALLOW_MEDIUM_REMOVAL 0x1e #define READ_FORMAT_CAPACITIES 0x23 #define SET_WINDOW 0x24 #define READ_CAPACITY 0x25 #define READ_10 0x28 #define WRITE_10 0x2a #define SEEK_10 0x2b #define POSITION_TO_ELEMENT 0x2b #define WRITE_VERIFY 0x2e #define VERIFY 0x2f #define SEARCH_HIGH 0x30 #define SEARCH_EQUAL 0x31 #define SEARCH_LOW 0x32 #define SET_LIMITS 0x33 #define PRE_FETCH 0x34 #define READ_POSITION 0x34 #define SYNCHRONIZE_CACHE 0x35 #define LOCK_UNLOCK_CACHE 0x36 #define READ_DEFECT_DATA 0x37 #define MEDIUM_SCAN 0x38 #define COMPARE 0x39 #define COPY_VERIFY 0x3a #define WRITE_BUFFER 0x3b #define READ_BUFFER 0x3c #define UPDATE_BLOCK 0x3d #define READ_LONG 0x3e #define WRITE_LONG 0x3f #define CHANGE_DEFINITION 0x40 #define WRITE_SAME 0x41 #define UNMAP 0x42 #define READ_TOC 0x43 #define READ_HEADER 0x44 #define GET_EVENT_STATUS_NOTIFICATION 0x4a #define LOG_SELECT 0x4c #define LOG_SENSE 0x4d #define XDWRITEREAD_10 0x53 #define MODE_SELECT_10 0x55 #define RESERVE_10 0x56 #define RELEASE_10 0x57 #define MODE_SENSE_10 0x5a #define PERSISTENT_RESERVE_IN 0x5e #define PERSISTENT_RESERVE_OUT 0x5f #define VARIABLE_LENGTH_CMD 0x7f #define REPORT_LUNS 0xa0 #define SECURITY_PROTOCOL_IN 0xa2 #define MAINTENANCE_IN 0xa3 #define MAINTENANCE_OUT 0xa4 #define MOVE_MEDIUM 0xa5 #define EXCHANGE_MEDIUM 0xa6 #define READ_12 0xa8 #define SERVICE_ACTION_OUT_12 0xa9 #define WRITE_12 0xaa #define READ_MEDIA_SERIAL_NUMBER 0xab /* Obsolete with SPC-2 */ #define SERVICE_ACTION_IN_12 0xab #define WRITE_VERIFY_12 0xae #define VERIFY_12 0xaf #define SEARCH_HIGH_12 0xb0 #define SEARCH_EQUAL_12 0xb1 #define SEARCH_LOW_12 0xb2 #define SECURITY_PROTOCOL_OUT 0xb5 #define READ_ELEMENT_STATUS 0xb8 #define SEND_VOLUME_TAG 0xb6 #define WRITE_LONG_2 0xea #define EXTENDED_COPY 0x83 #define RECEIVE_COPY_RESULTS 0x84 #define ACCESS_CONTROL_IN 0x86 #define ACCESS_CONTROL_OUT 0x87 #define READ_16 0x88 #define COMPARE_AND_WRITE 0x89 #define WRITE_16 0x8a #define READ_ATTRIBUTE 0x8c #define WRITE_ATTRIBUTE 0x8d #define VERIFY_16 0x8f #define SYNCHRONIZE_CACHE_16 0x91 #define WRITE_SAME_16 0x93 #define SERVICE_ACTION_BIDIRECTIONAL 0x9d #define SERVICE_ACTION_IN_16 0x9e #define SERVICE_ACTION_OUT_16 0x9f /* values for service action in */ #define SAI_READ_CAPACITY_16 0x10 #define SAI_GET_LBA_STATUS 0x12 #define SAI_REPORT_REFERRALS 0x13 /* values for VARIABLE_LENGTH_CMD service action codes * see spc4r17 Section D.3.5, table D.7 and D.8 */ #define VLC_SA_RECEIVE_CREDENTIAL 0x1800 /* values for maintenance in */ #define MI_REPORT_IDENTIFYING_INFORMATION 0x05 #define MI_REPORT_TARGET_PGS 0x0a #define MI_REPORT_ALIASES 0x0b #define MI_REPORT_SUPPORTED_OPERATION_CODES 0x0c #define MI_REPORT_SUPPORTED_TASK_MANAGEMENT_FUNCTIONS 0x0d #define MI_REPORT_PRIORITY 0x0e #define MI_REPORT_TIMESTAMP 0x0f #define MI_MANAGEMENT_PROTOCOL_IN 0x10 /* value for MI_REPORT_TARGET_PGS ext header */ #define MI_EXT_HDR_PARAM_FMT 0x20 /* values for maintenance out */ #define MO_SET_IDENTIFYING_INFORMATION 0x06 #define MO_SET_TARGET_PGS 0x0a #define MO_CHANGE_ALIASES 0x0b #define MO_SET_PRIORITY 0x0e #define MO_SET_TIMESTAMP 0x0f #define MO_MANAGEMENT_PROTOCOL_OUT 0x10 /* values for variable length command */ #define XDREAD_32 0x03 #define XDWRITE_32 0x04 #define XPWRITE_32 0x06 #define XDWRITEREAD_32 0x07 #define READ_32 0x09 #define VERIFY_32 0x0a #define WRITE_32 0x0b #define WRITE_SAME_32 0x0d /* Values for T10/04-262r7 */ #define ATA_16 0x85 /* 16-byte pass-thru */ #define ATA_12 0xa1 /* 12-byte pass-thru */ /* Vendor specific CDBs start here */ #define VENDOR_SPECIFIC_CDB 0xc0 /* * SCSI command lengths */ #define SCSI_MAX_VARLEN_CDB_SIZE 260 /* defined in T10 SCSI Primary Commands-2 (SPC2) */ struct scsi_varlen_cdb_hdr { __u8 opcode; /* opcode always == VARIABLE_LENGTH_CMD */ __u8 control; __u8 misc[5]; __u8 additional_cdb_length; /* total cdb length - 8 */ __be16 service_action; /* service specific data follows */ }; /* * SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft * T10/1561-D Revision 4 Draft dated 7th November 2002. */ #define SAM_STAT_GOOD 0x00 #define SAM_STAT_CHECK_CONDITION 0x02 #define SAM_STAT_CONDITION_MET 0x04 #define SAM_STAT_BUSY 0x08 #define SAM_STAT_INTERMEDIATE 0x10 #define SAM_STAT_INTERMEDIATE_CONDITION_MET 0x14 #define SAM_STAT_RESERVATION_CONFLICT 0x18 #define SAM_STAT_COMMAND_TERMINATED 0x22 /* obsolete in SAM-3 */ #define SAM_STAT_TASK_SET_FULL 0x28 #define SAM_STAT_ACA_ACTIVE 0x30 #define SAM_STAT_TASK_ABORTED 0x40 /* * Status codes. These are deprecated as they are shifted 1 bit right * from those found in the SCSI standards. This causes confusion for * applications that are ported to several OSes. Prefer SAM Status codes * above. */ #define GOOD 0x00 #define CHECK_CONDITION 0x01 #define CONDITION_GOOD 0x02 #define BUSY 0x04 #define INTERMEDIATE_GOOD 0x08 #define INTERMEDIATE_C_GOOD 0x0a #define RESERVATION_CONFLICT 0x0c #define COMMAND_TERMINATED 0x11 #define QUEUE_FULL 0x14 #define ACA_ACTIVE 0x18 #define TASK_ABORTED 0x20 #define STATUS_MASK 0xfe /* * SENSE KEYS */ #define NO_SENSE 0x00 #define RECOVERED_ERROR 0x01 #define NOT_READY 0x02 #define MEDIUM_ERROR 0x03 #define HARDWARE_ERROR 0x04 #define ILLEGAL_REQUEST 0x05 #define UNIT_ATTENTION 0x06 #define DATA_PROTECT 0x07 #define BLANK_CHECK 0x08 #define COPY_ABORTED 0x0a #define ABORTED_COMMAND 0x0b #define VOLUME_OVERFLOW 0x0d #define MISCOMPARE 0x0e /* * DEVICE TYPES * Please keep them in 0x%02x format for $MODALIAS to work */ #define TYPE_DISK 0x00 #define TYPE_TAPE 0x01 #define TYPE_PRINTER 0x02 #define TYPE_PROCESSOR 0x03 /* HP scanners use this */ #define TYPE_WORM 0x04 /* Treated as ROM by our system */ #define TYPE_ROM 0x05 #define TYPE_SCANNER 0x06 #define TYPE_MOD 0x07 /* Magneto-optical disk - * - treated as TYPE_DISK */ #define TYPE_MEDIUM_CHANGER 0x08 #define TYPE_COMM 0x09 /* Communications device */ #define TYPE_RAID 0x0c #define TYPE_ENCLOSURE 0x0d /* Enclosure Services Device */ #define TYPE_RBC 0x0e #define TYPE_OSD 0x11 #define TYPE_ZBC 0x14 #define TYPE_WLUN 0x1e /* well-known logical unit */ #define TYPE_NO_LUN 0x7f /* SCSI protocols; these are taken from SPC-3 section 7.5 */ enum scsi_protocol { SCSI_PROTOCOL_FCP = 0, /* Fibre Channel */ SCSI_PROTOCOL_SPI = 1, /* parallel SCSI */ SCSI_PROTOCOL_SSA = 2, /* Serial Storage Architecture - Obsolete */ SCSI_PROTOCOL_SBP = 3, /* firewire */ SCSI_PROTOCOL_SRP = 4, /* Infiniband RDMA */ SCSI_PROTOCOL_ISCSI = 5, SCSI_PROTOCOL_SAS = 6, SCSI_PROTOCOL_ADT = 7, /* Media Changers */ SCSI_PROTOCOL_ATA = 8, SCSI_PROTOCOL_UNSPEC = 0xf, /* No specific protocol */ }; /* * ScsiLun: 8 byte LUN. */ struct scsi_lun { __u8 scsi_lun[8]; }; #endif /* _SCSI_PROTO_H_ */ |