Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 | /* * Copyright (c) 1999-2001 Vojtech Pavlik * * Based on the work of: * Teemu Rantanen Derrick Cole * Peter Cervasio Christoph Niemann * Philip Blundell Russell King * Bob Harris */ /* * Inport (ATI XL and Microsoft) busmouse driver for Linux */ /* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * Should you need to contact me, the author, you can do so either by * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail: * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic */ #include <linux/module.h> #include <linux/ioport.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/input.h> #include <asm/io.h> #include <asm/irq.h> MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); MODULE_DESCRIPTION("Inport (ATI XL and Microsoft) busmouse driver"); MODULE_LICENSE("GPL"); #define INPORT_BASE 0x23c #define INPORT_EXTENT 4 #define INPORT_CONTROL_PORT INPORT_BASE + 0 #define INPORT_DATA_PORT INPORT_BASE + 1 #define INPORT_SIGNATURE_PORT INPORT_BASE + 2 #define INPORT_REG_BTNS 0x00 #define INPORT_REG_X 0x01 #define INPORT_REG_Y 0x02 #define INPORT_REG_MODE 0x07 #define INPORT_RESET 0x80 #ifdef CONFIG_MOUSE_ATIXL #define INPORT_NAME "ATI XL Mouse" #define INPORT_VENDOR 0x0002 #define INPORT_SPEED_30HZ 0x01 #define INPORT_SPEED_50HZ 0x02 #define INPORT_SPEED_100HZ 0x03 #define INPORT_SPEED_200HZ 0x04 #define INPORT_MODE_BASE INPORT_SPEED_100HZ #define INPORT_MODE_IRQ 0x08 #else #define INPORT_NAME "Microsoft InPort Mouse" #define INPORT_VENDOR 0x0001 #define INPORT_MODE_BASE 0x10 #define INPORT_MODE_IRQ 0x01 #endif #define INPORT_MODE_HOLD 0x20 #define INPORT_IRQ 5 static int inport_irq = INPORT_IRQ; module_param_named(irq, inport_irq, uint, 0); MODULE_PARM_DESC(irq, "IRQ number (5=default)"); static struct input_dev *inport_dev; static irqreturn_t inport_interrupt(int irq, void *dev_id) { unsigned char buttons; outb(INPORT_REG_MODE, INPORT_CONTROL_PORT); outb(INPORT_MODE_HOLD | INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT); outb(INPORT_REG_X, INPORT_CONTROL_PORT); input_report_rel(inport_dev, REL_X, inb(INPORT_DATA_PORT)); outb(INPORT_REG_Y, INPORT_CONTROL_PORT); input_report_rel(inport_dev, REL_Y, inb(INPORT_DATA_PORT)); outb(INPORT_REG_BTNS, INPORT_CONTROL_PORT); buttons = inb(INPORT_DATA_PORT); input_report_key(inport_dev, BTN_MIDDLE, buttons & 1); input_report_key(inport_dev, BTN_LEFT, buttons & 2); input_report_key(inport_dev, BTN_RIGHT, buttons & 4); outb(INPORT_REG_MODE, INPORT_CONTROL_PORT); outb(INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT); input_sync(inport_dev); return IRQ_HANDLED; } static int inport_open(struct input_dev *dev) { if (request_irq(inport_irq, inport_interrupt, 0, "inport", NULL)) return -EBUSY; outb(INPORT_REG_MODE, INPORT_CONTROL_PORT); outb(INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT); return 0; } static void inport_close(struct input_dev *dev) { outb(INPORT_REG_MODE, INPORT_CONTROL_PORT); outb(INPORT_MODE_BASE, INPORT_DATA_PORT); free_irq(inport_irq, NULL); } static int __init inport_init(void) { unsigned char a, b, c; int err; if (!request_region(INPORT_BASE, INPORT_EXTENT, "inport")) { printk(KERN_ERR "inport.c: Can't allocate ports at %#x\n", INPORT_BASE); return -EBUSY; } a = inb(INPORT_SIGNATURE_PORT); b = inb(INPORT_SIGNATURE_PORT); c = inb(INPORT_SIGNATURE_PORT); if (a == b || a != c) { printk(KERN_INFO "inport.c: Didn't find InPort mouse at %#x\n", INPORT_BASE); err = -ENODEV; goto err_release_region; } inport_dev = input_allocate_device(); if (!inport_dev) { printk(KERN_ERR "inport.c: Not enough memory for input device\n"); err = -ENOMEM; goto err_release_region; } inport_dev->name = INPORT_NAME; inport_dev->phys = "isa023c/input0"; inport_dev->id.bustype = BUS_ISA; inport_dev->id.vendor = INPORT_VENDOR; inport_dev->id.product = 0x0001; inport_dev->id.version = 0x0100; inport_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL); inport_dev->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT); inport_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y); inport_dev->open = inport_open; inport_dev->close = inport_close; outb(INPORT_RESET, INPORT_CONTROL_PORT); outb(INPORT_REG_MODE, INPORT_CONTROL_PORT); outb(INPORT_MODE_BASE, INPORT_DATA_PORT); err = input_register_device(inport_dev); if (err) goto err_free_dev; return 0; err_free_dev: input_free_device(inport_dev); err_release_region: release_region(INPORT_BASE, INPORT_EXTENT); return err; } static void __exit inport_exit(void) { input_unregister_device(inport_dev); release_region(INPORT_BASE, INPORT_EXTENT); } module_init(inport_init); module_exit(inport_exit); |