Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 | /* * rtc-ds1390.c -- driver for the Dallas/Maxim DS1390/93/94 SPI RTC * * Copyright (C) 2008 Mercury IMC Ltd * Written by Mark Jackson <mpfj@mimc.co.uk> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * NOTE: Currently this driver only supports the bare minimum for read * and write the RTC. The extra features provided by the chip family * (alarms, trickle charger, different control registers) are unavailable. */ #include <linux/init.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/rtc.h> #include <linux/spi/spi.h> #include <linux/bcd.h> #include <linux/slab.h> #include <linux/of.h> #define DS1390_REG_100THS 0x00 #define DS1390_REG_SECONDS 0x01 #define DS1390_REG_MINUTES 0x02 #define DS1390_REG_HOURS 0x03 #define DS1390_REG_DAY 0x04 #define DS1390_REG_DATE 0x05 #define DS1390_REG_MONTH_CENT 0x06 #define DS1390_REG_YEAR 0x07 #define DS1390_REG_ALARM_100THS 0x08 #define DS1390_REG_ALARM_SECONDS 0x09 #define DS1390_REG_ALARM_MINUTES 0x0A #define DS1390_REG_ALARM_HOURS 0x0B #define DS1390_REG_ALARM_DAY_DATE 0x0C #define DS1390_REG_CONTROL 0x0D #define DS1390_REG_STATUS 0x0E #define DS1390_REG_TRICKLE 0x0F #define DS1390_TRICKLE_CHARGER_ENABLE 0xA0 #define DS1390_TRICKLE_CHARGER_250_OHM 0x01 #define DS1390_TRICKLE_CHARGER_2K_OHM 0x02 #define DS1390_TRICKLE_CHARGER_4K_OHM 0x03 #define DS1390_TRICKLE_CHARGER_NO_DIODE 0x04 #define DS1390_TRICKLE_CHARGER_DIODE 0x08 struct ds1390 { struct rtc_device *rtc; u8 txrx_buf[9]; /* cmd + 8 registers */ }; static void ds1390_set_reg(struct device *dev, unsigned char address, unsigned char data) { struct spi_device *spi = to_spi_device(dev); unsigned char buf[2]; /* MSB must be '1' to write */ buf[0] = address | 0x80; buf[1] = data; spi_write(spi, buf, 2); } static int ds1390_get_reg(struct device *dev, unsigned char address, unsigned char *data) { struct spi_device *spi = to_spi_device(dev); struct ds1390 *chip = dev_get_drvdata(dev); int status; if (!data) return -EINVAL; /* Clear MSB to indicate read */ chip->txrx_buf[0] = address & 0x7f; /* do the i/o */ status = spi_write_then_read(spi, chip->txrx_buf, 1, chip->txrx_buf, 1); if (status != 0) return status; *data = chip->txrx_buf[0]; return 0; } static void ds1390_trickle_of_init(struct spi_device *spi) { u32 ohms = 0; u8 value; if (of_property_read_u32(spi->dev.of_node, "trickle-resistor-ohms", &ohms)) goto out; /* Enable charger */ value = DS1390_TRICKLE_CHARGER_ENABLE; if (of_property_read_bool(spi->dev.of_node, "trickle-diode-disable")) value |= DS1390_TRICKLE_CHARGER_NO_DIODE; else value |= DS1390_TRICKLE_CHARGER_DIODE; /* Resistor select */ switch (ohms) { case 250: value |= DS1390_TRICKLE_CHARGER_250_OHM; break; case 2000: value |= DS1390_TRICKLE_CHARGER_2K_OHM; break; case 4000: value |= DS1390_TRICKLE_CHARGER_4K_OHM; break; default: dev_warn(&spi->dev, "Unsupported ohm value %02ux in dt\n", ohms); return; } ds1390_set_reg(&spi->dev, DS1390_REG_TRICKLE, value); out: return; } static int ds1390_read_time(struct device *dev, struct rtc_time *dt) { struct spi_device *spi = to_spi_device(dev); struct ds1390 *chip = dev_get_drvdata(dev); int status; /* build the message */ chip->txrx_buf[0] = DS1390_REG_SECONDS; /* do the i/o */ status = spi_write_then_read(spi, chip->txrx_buf, 1, chip->txrx_buf, 8); if (status != 0) return status; /* The chip sends data in this order: * Seconds, Minutes, Hours, Day, Date, Month / Century, Year */ dt->tm_sec = bcd2bin(chip->txrx_buf[0]); dt->tm_min = bcd2bin(chip->txrx_buf[1]); dt->tm_hour = bcd2bin(chip->txrx_buf[2]); dt->tm_wday = bcd2bin(chip->txrx_buf[3]); dt->tm_mday = bcd2bin(chip->txrx_buf[4]); /* mask off century bit */ dt->tm_mon = bcd2bin(chip->txrx_buf[5] & 0x7f) - 1; /* adjust for century bit */ dt->tm_year = bcd2bin(chip->txrx_buf[6]) + ((chip->txrx_buf[5] & 0x80) ? 100 : 0); return rtc_valid_tm(dt); } static int ds1390_set_time(struct device *dev, struct rtc_time *dt) { struct spi_device *spi = to_spi_device(dev); struct ds1390 *chip = dev_get_drvdata(dev); /* build the message */ chip->txrx_buf[0] = DS1390_REG_SECONDS | 0x80; chip->txrx_buf[1] = bin2bcd(dt->tm_sec); chip->txrx_buf[2] = bin2bcd(dt->tm_min); chip->txrx_buf[3] = bin2bcd(dt->tm_hour); chip->txrx_buf[4] = bin2bcd(dt->tm_wday); chip->txrx_buf[5] = bin2bcd(dt->tm_mday); chip->txrx_buf[6] = bin2bcd(dt->tm_mon + 1) | ((dt->tm_year > 99) ? 0x80 : 0x00); chip->txrx_buf[7] = bin2bcd(dt->tm_year % 100); /* do the i/o */ return spi_write_then_read(spi, chip->txrx_buf, 8, NULL, 0); } static const struct rtc_class_ops ds1390_rtc_ops = { .read_time = ds1390_read_time, .set_time = ds1390_set_time, }; static int ds1390_probe(struct spi_device *spi) { unsigned char tmp; struct ds1390 *chip; int res; spi->mode = SPI_MODE_3; spi->bits_per_word = 8; spi_setup(spi); chip = devm_kzalloc(&spi->dev, sizeof(*chip), GFP_KERNEL); if (!chip) return -ENOMEM; spi_set_drvdata(spi, chip); res = ds1390_get_reg(&spi->dev, DS1390_REG_SECONDS, &tmp); if (res != 0) { dev_err(&spi->dev, "unable to read device\n"); return res; } if (spi->dev.of_node) ds1390_trickle_of_init(spi); chip->rtc = devm_rtc_device_register(&spi->dev, "ds1390", &ds1390_rtc_ops, THIS_MODULE); if (IS_ERR(chip->rtc)) { dev_err(&spi->dev, "unable to register device\n"); res = PTR_ERR(chip->rtc); } return res; } static struct spi_driver ds1390_driver = { .driver = { .name = "rtc-ds1390", }, .probe = ds1390_probe, }; module_spi_driver(ds1390_driver); MODULE_DESCRIPTION("Dallas/Maxim DS1390/93/94 SPI RTC driver"); MODULE_AUTHOR("Mark Jackson <mpfj@mimc.co.uk>"); MODULE_LICENSE("GPL"); MODULE_ALIAS("spi:rtc-ds1390"); |