Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 | /* * ST Microelectronics MFD: stmpe's spi client specific driver * * Copyright (C) ST Microelectronics SA 2011 * * License Terms: GNU General Public License, version 2 * Author: Viresh Kumar <vireshk@kernel.org> for ST Microelectronics */ #include <linux/spi/spi.h> #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> #include <linux/types.h> #include "stmpe.h" #define READ_CMD (1 << 7) static int spi_reg_read(struct stmpe *stmpe, u8 reg) { struct spi_device *spi = stmpe->client; int status = spi_w8r16(spi, reg | READ_CMD); return (status < 0) ? status : status >> 8; } static int spi_reg_write(struct stmpe *stmpe, u8 reg, u8 val) { struct spi_device *spi = stmpe->client; u16 cmd = (val << 8) | reg; return spi_write(spi, (const u8 *)&cmd, 2); } static int spi_block_read(struct stmpe *stmpe, u8 reg, u8 length, u8 *values) { int ret, i; for (i = 0; i < length; i++) { ret = spi_reg_read(stmpe, reg + i); if (ret < 0) return ret; *(values + i) = ret; } return 0; } static int spi_block_write(struct stmpe *stmpe, u8 reg, u8 length, const u8 *values) { int ret = 0, i; for (i = length; i > 0; i--, reg++) { ret = spi_reg_write(stmpe, reg, *(values + i - 1)); if (ret < 0) return ret; } return ret; } static void spi_init(struct stmpe *stmpe) { struct spi_device *spi = stmpe->client; spi->bits_per_word = 8; /* This register is only present for stmpe811 */ if (stmpe->variant->id_val == 0x0811) spi_reg_write(stmpe, STMPE811_REG_SPI_CFG, spi->mode); if (spi_setup(spi) < 0) dev_dbg(&spi->dev, "spi_setup failed\n"); } static struct stmpe_client_info spi_ci = { .read_byte = spi_reg_read, .write_byte = spi_reg_write, .read_block = spi_block_read, .write_block = spi_block_write, .init = spi_init, }; static int stmpe_spi_probe(struct spi_device *spi) { const struct spi_device_id *id = spi_get_device_id(spi); /* don't exceed max specified rate - 1MHz - Limitation of STMPE */ if (spi->max_speed_hz > 1000000) { dev_dbg(&spi->dev, "f(sample) %d KHz?\n", (spi->max_speed_hz/1000)); return -EINVAL; } spi_ci.irq = spi->irq; spi_ci.client = spi; spi_ci.dev = &spi->dev; return stmpe_probe(&spi_ci, id->driver_data); } static int stmpe_spi_remove(struct spi_device *spi) { struct stmpe *stmpe = spi_get_drvdata(spi); return stmpe_remove(stmpe); } static const struct of_device_id stmpe_spi_of_match[] = { { .compatible = "st,stmpe610", }, { .compatible = "st,stmpe801", }, { .compatible = "st,stmpe811", }, { .compatible = "st,stmpe1601", }, { .compatible = "st,stmpe2401", }, { .compatible = "st,stmpe2403", }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, stmpe_spi_of_match); static const struct spi_device_id stmpe_spi_id[] = { { "stmpe610", STMPE610 }, { "stmpe801", STMPE801 }, { "stmpe811", STMPE811 }, { "stmpe1601", STMPE1601 }, { "stmpe2401", STMPE2401 }, { "stmpe2403", STMPE2403 }, { } }; MODULE_DEVICE_TABLE(spi, stmpe_id); static struct spi_driver stmpe_spi_driver = { .driver = { .name = "stmpe-spi", .of_match_table = of_match_ptr(stmpe_spi_of_match), #ifdef CONFIG_PM .pm = &stmpe_dev_pm_ops, #endif }, .probe = stmpe_spi_probe, .remove = stmpe_spi_remove, .id_table = stmpe_spi_id, }; static int __init stmpe_init(void) { return spi_register_driver(&stmpe_spi_driver); } subsys_initcall(stmpe_init); static void __exit stmpe_exit(void) { spi_unregister_driver(&stmpe_spi_driver); } module_exit(stmpe_exit); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("STMPE MFD SPI Interface Driver"); MODULE_AUTHOR("Viresh Kumar <vireshk@kernel.org>"); |