Loading...
/* * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar * and Markus Pargmann, Pengutronix * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License * Version 2 or later at the following locations: * * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; #include "imx27.dtsi" / { model = "Phytec pca100"; compatible = "phytec,imx27-pca100", "fsl,imx27"; memory@a0000000 { reg = <0xa0000000 0x08000000>; /* 128MB */ }; }; &cspi1 { cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>, <&gpio4 27 GPIO_ACTIVE_HIGH>; status = "okay"; }; &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; status = "okay"; }; &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; at24@52 { compatible = "atmel,24c32"; pagesize = <32>; reg = <0x52>; }; }; &iomuxc { imx27-phycard-s-som { pinctrl_fec1: fec1grp { fsl,pins = < MX27_PAD_SD3_CMD__FEC_TXD0 0x0 MX27_PAD_SD3_CLK__FEC_TXD1 0x0 MX27_PAD_ATA_DATA0__FEC_TXD2 0x0 MX27_PAD_ATA_DATA1__FEC_TXD3 0x0 MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0 MX27_PAD_ATA_DATA3__FEC_RXD1 0x0 MX27_PAD_ATA_DATA4__FEC_RXD2 0x0 MX27_PAD_ATA_DATA5__FEC_RXD3 0x0 MX27_PAD_ATA_DATA6__FEC_MDIO 0x0 MX27_PAD_ATA_DATA7__FEC_MDC 0x0 MX27_PAD_ATA_DATA8__FEC_CRS 0x0 MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0 MX27_PAD_ATA_DATA10__FEC_RXD0 0x0 MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0 MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0 MX27_PAD_ATA_DATA13__FEC_COL 0x0 MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0 MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0 >; }; pinctrl_i2c2: i2c2grp { fsl,pins = < MX27_PAD_I2C2_SDA__I2C2_SDA 0x0 MX27_PAD_I2C2_SCL__I2C2_SCL 0x0 >; }; pinctrl_nfc: nfcgrp { fsl,pins = < MX27_PAD_NFRB__NFRB 0x0 MX27_PAD_NFCLE__NFCLE 0x0 MX27_PAD_NFWP_B__NFWP_B 0x0 MX27_PAD_NFCE_B__NFCE_B 0x0 MX27_PAD_NFALE__NFALE 0x0 MX27_PAD_NFRE_B__NFRE_B 0x0 MX27_PAD_NFWE_B__NFWE_B 0x0 >; }; }; }; &nfc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nfc>; nand-bus-width = <8>; nand-ecc-mode = "hw"; nand-on-flash-bbt; status = "okay"; }; |