* Network

Currently defined compatibles:
- fsl,cpm1-scc-enet
- fsl,cpm2-scc-enet
- fsl,cpm1-fec-enet
- fsl,cpm2-fcc-enet (third resource is GFEMR)
- fsl,qe-enet

Example:

	ethernet@11300 {
		compatible = "fsl,mpc8272-fcc-enet",
			     "fsl,cpm2-fcc-enet";
		reg = <11300 20 8400 100 11390 1>;
		local-mac-address = [ 00 00 00 00 00 00 ];
		interrupts = <20 8>;
		interrupt-parent = <&PIC>;
		phy-handle = <&PHY0>;
		fsl,cpm-command = <12000300>;
	};

* MDIO

Currently defined compatibles:
fsl,pq1-fec-mdio (reg is same as first resource of FEC device)
fsl,cpm2-mdio-bitbang (reg is port C registers)

Properties for fsl,cpm2-mdio-bitbang:
fsl,mdio-pin : pin of port C controlling mdio data
fsl,mdc-pin : pin of port C controlling mdio clock

Example:
	mdio@10d40 {
		compatible = "fsl,mpc8272ads-mdio-bitbang",
			     "fsl,mpc8272-mdio-bitbang",
			     "fsl,cpm2-mdio-bitbang";
		reg = <10d40 14>;
		#address-cells = <1>;
		#size-cells = <0>;
		fsl,mdio-pin = <12>;
		fsl,mdc-pin = <13>;
	};

* HDLC

Currently defined compatibles:
- fsl,ucc-hdlc

Properties for fsl,ucc-hdlc:
- rx-clock-name
- tx-clock-name
	Usage: required
	Value type: <string>
	Definition : Must be "brg1"-"brg16" for internal clock source,
		     Must be "clk1"-"clk24" for external clock source.

- fsl,tdm-interface
	Usage: optional
	Value type: <empty>
	Definition : Specify that hdlc is based on tdm-interface

The property below is dependent on fsl,tdm-interface:
- fsl,rx-sync-clock
	Usage: required
	Value type: <string>
	Definition : Must be "none", "rsync_pin", "brg9-11" and "brg13-15".

- fsl,tx-sync-clock
	Usage: required
	Value type: <string>
	Definition : Must be "none", "tsync_pin", "brg9-11" and "brg13-15".

- fsl,tdm-framer-type
	Usage: required for tdm interface
	Value type: <string>
	Definition : "e1" or "t1".Now e1 and t1 are used, other framer types
		     are not supported.

- fsl,tdm-id
	Usage: required for tdm interface
	Value type: <u32>
	Definition : number of TDM ID

- fsl,tx-timeslot-mask
- fsl,rx-timeslot-mask
	Usage: required for tdm interface
	Value type: <u32>
	Definition : time slot mask for TDM operation. Indicates which time
		     slots used for transmitting and receiving.

- fsl,siram-entry-id
	Usage: required for tdm interface
	Value type: <u32>
	Definition : Must be 0,2,4...64. the number of TDM entry.

- fsl,tdm-internal-loopback
	usage: optional for tdm interface
	value type: <empty>
	Definition : Internal loopback connecting on TDM layer.

Example for tdm interface:

	ucc@2000 {
		compatible = "fsl,ucc-hdlc";
		rx-clock-name = "clk8";
		tx-clock-name = "clk9";
		fsl,rx-sync-clock = "rsync_pin";
		fsl,tx-sync-clock = "tsync_pin";
		fsl,tx-timeslot-mask = <0xfffffffe>;
		fsl,rx-timeslot-mask = <0xfffffffe>;
		fsl,tdm-framer-type = "e1";
		fsl,tdm-id = <0>;
		fsl,siram-entry-id = <0>;
		fsl,tdm-interface;
	};

Example for hdlc without tdm interface:

	ucc@2000 {
		compatible = "fsl,ucc-hdlc";
		rx-clock-name = "brg1";
		tx-clock-name = "brg1";
	};