Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 | /* * sama5d3xmb_cmp.dts - Device Tree file for SAMA5D3x CMP mother board * * Copyright (C) 2016 Atmel, * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual * licensing only applies to this file, and not this project as a * whole. * * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following * conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ #include "sama5d3xcm_cmp.dtsi" / { compatible = "atmel,sama5d3xmb-cmp", "atmel,sama5d3xcm-cmp", "atmel,sama5d3", "atmel,sama5"; ahb { apb { mmc0: mmc@f0000000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; status = "okay"; slot@0 { reg = <0>; bus-width = <4>; cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>; }; }; spi0: spi@f0004000 { dmas = <0>, <0>; /* Do not use DMA for spi0 */ m25p80@0 { compatible = "atmel,at25df321a"; spi-max-frequency = <50000000>; reg = <0>; }; }; ssc0: ssc@f0008000 { atmel,clk-from-rk-pin; }; /* * i2c0 conflicts with ISI: * disable it to allow the use of ISI * can not enable audio when i2c0 disabled */ i2c0: i2c@f0014000 { wm8904: wm8904@1a { compatible = "wlf,wm8904"; reg = <0x1a>; clocks = <&pck0>; clock-names = "mclk"; }; }; i2c1: i2c@f0018000 { ov2640: camera@30 { compatible = "ovti,ov2640"; reg = <0x30>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>; pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; /* use pck1 for the master clock of ov2640 */ clocks = <&pck1>; clock-names = "xvclk"; assigned-clocks = <&pck1>; assigned-clock-rates = <25000000>; port { ov2640_0: endpoint { remote-endpoint = <&isi_0>; bus-width = <8>; }; }; }; }; usart1: serial@f0020000 { dmas = <0>, <0>; /* Do not use DMA for usart1 */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; status = "okay"; }; isi: isi@f0034000 { port { isi_0: endpoint { remote-endpoint = <&ov2640_0>; bus-width = <8>; vsync-active = <1>; hsync-active = <1>; }; }; }; mmc1: mmc@f8000000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; status = "okay"; slot@0 { reg = <0>; bus-width = <4>; cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>; }; }; adc0: adc@f8018000 { pinctrl-names = "default", "sleep"; pinctrl-0 = < &pinctrl_adc0_adtrg &pinctrl_adc0_ad0 &pinctrl_adc0_ad1 &pinctrl_adc0_ad2 &pinctrl_adc0_ad3 &pinctrl_adc0_ad4 >; pinctrl-1 = < &pinctrl_adc0_adtrg_sleep &pinctrl_adc0_ad0_sleep &pinctrl_adc0_ad1_sleep &pinctrl_adc0_ad2_sleep &pinctrl_adc0_ad3_sleep &pinctrl_adc0_ad4_sleep >; status = "okay"; }; macb1: ethernet@f802c000 { phy-mode = "rmii"; #address-cells = <1>; #size-cells = <0>; phy0: ethernet-phy@1 { /*interrupt-parent = <&pioE>;*/ /*interrupts = <30 IRQ_TYPE_EDGE_FALLING>;*/ reg = <1>; }; }; pinctrl@fffff200 { adc0 { pinctrl_adc0_adtrg_sleep: adc0_adtrg_1 { atmel,pins = <AT91_PIOD 19 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; }; pinctrl_adc0_ad0_sleep: adc0_ad0_1 { atmel,pins = <AT91_PIOD 20 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; }; pinctrl_adc0_ad1_sleep: adc0_ad1_1 { atmel,pins = <AT91_PIOD 21 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; }; pinctrl_adc0_ad2_sleep: adc0_ad2_1 { atmel,pins = <AT91_PIOD 22 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; }; pinctrl_adc0_ad3_sleep: adc0_ad3_1 { atmel,pins = <AT91_PIOD 23 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; }; pinctrl_adc0_ad4_sleep: adc0_ad4_1 { atmel,pins = <AT91_PIOD 24 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; }; }; board { pinctrl_gpio_keys: gpio_keys { atmel,pins = <AT91_PIOE 27 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; }; pinctrl_mmc0_cd: mmc0_cd { atmel,pins = <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; }; pinctrl_mmc1_cd: mmc1_cd { atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; }; pinctrl_pck0_as_audio_mck: pck0_as_audio_mck { atmel,pins = <AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; }; pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 { atmel,pins = <AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; }; pinctrl_sensor_reset: sensor_reset-0 { atmel,pins = <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; }; pinctrl_sensor_power: sensor_power-0 { atmel,pins = <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; }; pinctrl_usba_vbus: usba_vbus { atmel,pins = <AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; }; }; }; dbgu: serial@ffffee00 { dmas = <0>, <0>; /* Do not use DMA for dbgu */ status = "okay"; }; watchdog@fffffe40 { status = "okay"; }; }; usb0: gadget@500000 { atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usba_vbus>; status = "okay"; }; }; sound { compatible = "atmel,asoc-wm8904"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pck0_as_audio_mck>; atmel,model = "wm8904 @ SAMA5D3EK"; atmel,audio-routing = "Headphone Jack", "HPOUTL", "Headphone Jack", "HPOUTR", "IN2L", "Line In Jack", "IN2R", "Line In Jack", "Mic", "MICBIAS", "IN1L", "Mic"; atmel,ssc-controller = <&ssc0>; atmel,audio-codec = <&wm8904>; status = "disabled"; }; /* Conflict with LCD pins */ gpio_keys { compatible = "gpio-keys"; status = "okay"; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; pb_user1 { label = "pb_user1"; gpios = <&pioE 27 GPIO_ACTIVE_HIGH>; linux,code = <0x100>; wakeup-source; }; }; }; |