Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 | /* * Copyright (C) 2015 Altera Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. * * This program is distributed in the hope it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program. If not, see <http://www.gnu.org/licenses/>. */ /dts-v1/; / { model = "Altera NiosII Max10"; compatible = "altr,niosii-max10"; #address-cells = <1>; #size-cells = <1>; cpus { #address-cells = <1>; #size-cells = <0>; cpu: cpu@0 { device_type = "cpu"; compatible = "altr,nios2-1.1"; reg = <0x00000000>; interrupt-controller; #interrupt-cells = <1>; altr,exception-addr = <0xc8000120>; altr,fast-tlb-miss-addr = <0xc0000100>; altr,has-div = <1>; altr,has-initda = <1>; altr,has-mmu = <1>; altr,has-mul = <1>; altr,implementation = "fast"; altr,pid-num-bits = <8>; altr,reset-addr = <0xd4000000>; altr,tlb-num-entries = <256>; altr,tlb-num-ways = <16>; altr,tlb-ptr-sz = <8>; clock-frequency = <75000000>; dcache-line-size = <32>; dcache-size = <32768>; icache-line-size = <32>; icache-size = <32768>; }; }; memory { device_type = "memory"; reg = <0x08000000 0x08000000>, <0x00000000 0x00000400>; }; sopc0: sopc@0 { device_type = "soc"; ranges; #address-cells = <1>; #size-cells = <1>; compatible = "altr,avalon", "simple-bus"; bus-frequency = <75000000>; jtag_uart: serial@18001530 { compatible = "altr,juart-1.0"; reg = <0x18001530 0x00000008>; interrupt-parent = <&cpu>; interrupts = <7>; }; a_16550_uart_0: serial@18001600 { compatible = "altr,16550-FIFO32", "ns16550a"; reg = <0x18001600 0x00000200>; interrupt-parent = <&cpu>; interrupts = <1>; auto-flow-control = <1>; clock-frequency = <50000000>; fifo-size = <32>; reg-io-width = <4>; reg-shift = <2>; tx-threshold = <16>; }; sysid: sysid@18001528 { compatible = "altr,sysid-1.0"; reg = <0x18001528 0x00000008>; id = <4207856382>; timestamp = <1431309290>; }; rgmii_0_eth_tse_0: ethernet@400 { compatible = "altr,tse-msgdma-1.0", "altr,tse-1.0"; reg = <0x00000400 0x00000400>, <0x00000820 0x00000020>, <0x00000800 0x00000020>, <0x000008c0 0x00000008>, <0x00000840 0x00000020>, <0x00000860 0x00000020>; reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc"; interrupt-parent = <&cpu>; interrupts = <2 3>; interrupt-names = "rx_irq", "tx_irq"; rx-fifo-depth = <8192>; tx-fifo-depth = <8192>; address-bits = <48>; max-frame-size = <1518>; local-mac-address = [00 00 00 00 00 00]; altr,has-supplementary-unicast; altr,enable-sup-addr = <1>; altr,has-hash-multicast-filter; altr,enable-hash = <1>; phy-mode = "rgmii-id"; phy-handle = <&phy0>; rgmii_0_eth_tse_0_mdio: mdio { compatible = "altr,tse-mdio"; #address-cells = <1>; #size-cells = <0>; phy0: ethernet-phy@0 { reg = <0>; device_type = "ethernet-phy"; }; }; }; enet_pll: clock@0 { compatible = "altr,pll-1.0"; #clock-cells = <1>; enet_pll_c0: enet_pll_c0 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <125000000>; clock-output-names = "enet_pll-c0"; }; enet_pll_c1: enet_pll_c1 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <25000000>; clock-output-names = "enet_pll-c1"; }; enet_pll_c2: enet_pll_c2 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <2500000>; clock-output-names = "enet_pll-c2"; }; }; sys_pll: clock@1 { compatible = "altr,pll-1.0"; #clock-cells = <1>; sys_pll_c0: sys_pll_c0 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <100000000>; clock-output-names = "sys_pll-c0"; }; sys_pll_c1: sys_pll_c1 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; clock-output-names = "sys_pll-c1"; }; sys_pll_c2: sys_pll_c2 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <75000000>; clock-output-names = "sys_pll-c2"; }; }; sys_clk_timer: timer@18001440 { compatible = "altr,timer-1.0"; reg = <0x18001440 0x00000020>; interrupt-parent = <&cpu>; interrupts = <0>; clock-frequency = <75000000>; }; led_pio: gpio@180014d0 { compatible = "altr,pio-1.0"; reg = <0x180014d0 0x00000010>; altr,gpio-bank-width = <4>; resetvalue = <15>; #gpio-cells = <2>; gpio-controller; }; button_pio: gpio@180014c0 { compatible = "altr,pio-1.0"; reg = <0x180014c0 0x00000010>; interrupt-parent = <&cpu>; interrupts = <6>; altr,gpio-bank-width = <3>; altr,interrupt-type = <2>; edge_type = <1>; level_trigger = <0>; resetvalue = <0>; #gpio-cells = <2>; gpio-controller; }; sys_clk_timer_1: timer@880 { compatible = "altr,timer-1.0"; reg = <0x00000880 0x00000020>; interrupt-parent = <&cpu>; interrupts = <5>; clock-frequency = <75000000>; }; fpga_leds: leds { compatible = "gpio-leds"; led_fpga0: fpga0 { label = "fpga_led0"; gpios = <&led_pio 0 1>; }; led_fpga1: fpga1 { label = "fpga_led1"; gpios = <&led_pio 1 1>; }; led_fpga2: fpga2 { label = "fpga_led2"; gpios = <&led_pio 2 1>; }; led_fpga3: fpga3 { label = "fpga_led3"; gpios = <&led_pio 3 1>; }; }; }; chosen { bootargs = "debug earlycon console=ttyS0,115200"; stdout-path = &a_16550_uart_0; }; }; |