Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834 1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871 1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892 1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 2032 2033 2034 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046 2047 2048 2049 2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063 2064 2065 2066 2067 2068 2069 2070 2071 2072 2073 2074 2075 2076 2077 2078 2079 2080 2081 2082 2083 2084 2085 2086 2087 2088 2089 2090 2091 2092 2093 2094 2095 2096 2097 2098 2099 2100 2101 2102 2103 2104 2105 2106 2107 2108 2109 2110 2111 2112 2113 2114 2115 2116 2117 2118 2119 2120 2121 2122 2123 2124 2125 2126 2127 2128 2129 2130 2131 2132 2133 2134 2135 2136 2137 2138 2139 2140 2141 2142 2143 2144 2145 2146 2147 2148 2149 2150 2151 2152 2153 2154 2155 2156 2157 2158 2159 2160 2161 2162 2163 2164 2165 2166 2167 2168 2169 2170 2171 2172 2173 2174 2175 2176 2177 2178 2179 2180 2181 2182 2183 2184 2185 2186 2187 2188 2189 2190 2191 2192 2193 2194 2195 2196 2197 2198 2199 2200 2201 2202 2203 2204 2205 2206 2207 2208 2209 2210 2211 2212 2213 2214 2215 2216 2217 2218 2219 2220 2221 2222 2223 2224 2225 2226 2227 2228 2229 2230 2231 2232 2233 2234 2235 2236 2237 2238 2239 2240 2241 2242 2243 2244 2245 2246 2247 2248 2249 2250 2251 2252 2253 2254 2255 2256 2257 2258 2259 2260 2261 2262 2263 2264 2265 2266 2267 2268 2269 2270 2271 2272 2273 2274 2275 2276 2277 2278 2279 2280 2281 2282 2283 2284 2285 2286 2287 2288 2289 2290 2291 2292 2293 2294 2295 2296 2297 2298 2299 2300 2301 2302 2303 2304 2305 2306 2307 2308 2309 2310 2311 2312 2313 2314 2315 2316 2317 2318 2319 2320 2321 2322 2323 2324 2325 2326 2327 2328 2329 2330 2331 2332 2333 2334 2335 2336 2337 2338 2339 2340 2341 2342 2343 2344 2345 2346 2347 2348 2349 2350 2351 2352 2353 2354 2355 2356 2357 2358 2359 2360 2361 2362 2363 2364 2365 2366 2367 2368 2369 2370 2371 2372 2373 2374 2375 2376 2377 2378 2379 2380 2381 2382 2383 2384 2385 2386 2387 2388 2389 2390 2391 2392 2393 2394 2395 2396 2397 2398 2399 2400 2401 2402 2403 2404 2405 2406 2407 2408 2409 2410 2411 2412 2413 2414 2415 2416 2417 2418 2419 2420 2421 2422 2423 2424 2425 2426 2427 2428 2429 2430 2431 2432 2433 2434 2435 2436 2437 2438 2439 2440 2441 2442 2443 2444 2445 2446 2447 2448 2449 2450 2451 2452 2453 2454 2455 2456 2457 2458 2459 2460 2461 2462 2463 2464 2465 2466 2467 2468 2469 2470 2471 2472 2473 2474 2475 2476 2477 2478 2479 2480 2481 2482 2483 2484 2485 2486 2487 2488 2489 2490 2491 2492 2493 2494 2495 2496 2497 2498 2499 2500 2501 | /* * A driver for the ARM PL022 PrimeCell SSP/SPI bus master. * * Copyright (C) 2008-2012 ST-Ericsson AB * Copyright (C) 2006 STMicroelectronics Pvt. Ltd. * * Author: Linus Walleij <linus.walleij@stericsson.com> * * Initial version inspired by: * linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c * Initial adoption to PL022 by: * Sachin Verma <sachin.verma@st.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include <linux/init.h> #include <linux/module.h> #include <linux/device.h> #include <linux/ioport.h> #include <linux/errno.h> #include <linux/interrupt.h> #include <linux/spi/spi.h> #include <linux/delay.h> #include <linux/clk.h> #include <linux/err.h> #include <linux/amba/bus.h> #include <linux/amba/pl022.h> #include <linux/io.h> #include <linux/slab.h> #include <linux/dmaengine.h> #include <linux/dma-mapping.h> #include <linux/scatterlist.h> #include <linux/pm_runtime.h> #include <linux/gpio.h> #include <linux/of_gpio.h> #include <linux/pinctrl/consumer.h> /* * This macro is used to define some register default values. * reg is masked with mask, the OR:ed with an (again masked) * val shifted sb steps to the left. */ #define SSP_WRITE_BITS(reg, val, mask, sb) \ ((reg) = (((reg) & ~(mask)) | (((val)<<(sb)) & (mask)))) /* * This macro is also used to define some default values. * It will just shift val by sb steps to the left and mask * the result with mask. */ #define GEN_MASK_BITS(val, mask, sb) \ (((val)<<(sb)) & (mask)) #define DRIVE_TX 0 #define DO_NOT_DRIVE_TX 1 #define DO_NOT_QUEUE_DMA 0 #define QUEUE_DMA 1 #define RX_TRANSFER 1 #define TX_TRANSFER 2 /* * Macros to access SSP Registers with their offsets */ #define SSP_CR0(r) (r + 0x000) #define SSP_CR1(r) (r + 0x004) #define SSP_DR(r) (r + 0x008) #define SSP_SR(r) (r + 0x00C) #define SSP_CPSR(r) (r + 0x010) #define SSP_IMSC(r) (r + 0x014) #define SSP_RIS(r) (r + 0x018) #define SSP_MIS(r) (r + 0x01C) #define SSP_ICR(r) (r + 0x020) #define SSP_DMACR(r) (r + 0x024) #define SSP_CSR(r) (r + 0x030) /* vendor extension */ #define SSP_ITCR(r) (r + 0x080) #define SSP_ITIP(r) (r + 0x084) #define SSP_ITOP(r) (r + 0x088) #define SSP_TDR(r) (r + 0x08C) #define SSP_PID0(r) (r + 0xFE0) #define SSP_PID1(r) (r + 0xFE4) #define SSP_PID2(r) (r + 0xFE8) #define SSP_PID3(r) (r + 0xFEC) #define SSP_CID0(r) (r + 0xFF0) #define SSP_CID1(r) (r + 0xFF4) #define SSP_CID2(r) (r + 0xFF8) #define SSP_CID3(r) (r + 0xFFC) /* * SSP Control Register 0 - SSP_CR0 */ #define SSP_CR0_MASK_DSS (0x0FUL << 0) #define SSP_CR0_MASK_FRF (0x3UL << 4) #define SSP_CR0_MASK_SPO (0x1UL << 6) #define SSP_CR0_MASK_SPH (0x1UL << 7) #define SSP_CR0_MASK_SCR (0xFFUL << 8) /* * The ST version of this block moves som bits * in SSP_CR0 and extends it to 32 bits */ #define SSP_CR0_MASK_DSS_ST (0x1FUL << 0) #define SSP_CR0_MASK_HALFDUP_ST (0x1UL << 5) #define SSP_CR0_MASK_CSS_ST (0x1FUL << 16) #define SSP_CR0_MASK_FRF_ST (0x3UL << 21) /* * SSP Control Register 0 - SSP_CR1 */ #define SSP_CR1_MASK_LBM (0x1UL << 0) #define SSP_CR1_MASK_SSE (0x1UL << 1) #define SSP_CR1_MASK_MS (0x1UL << 2) #define SSP_CR1_MASK_SOD (0x1UL << 3) /* * The ST version of this block adds some bits * in SSP_CR1 */ #define SSP_CR1_MASK_RENDN_ST (0x1UL << 4) #define SSP_CR1_MASK_TENDN_ST (0x1UL << 5) #define SSP_CR1_MASK_MWAIT_ST (0x1UL << 6) #define SSP_CR1_MASK_RXIFLSEL_ST (0x7UL << 7) #define SSP_CR1_MASK_TXIFLSEL_ST (0x7UL << 10) /* This one is only in the PL023 variant */ #define SSP_CR1_MASK_FBCLKDEL_ST (0x7UL << 13) /* * SSP Status Register - SSP_SR */ #define SSP_SR_MASK_TFE (0x1UL << 0) /* Transmit FIFO empty */ #define SSP_SR_MASK_TNF (0x1UL << 1) /* Transmit FIFO not full */ #define SSP_SR_MASK_RNE (0x1UL << 2) /* Receive FIFO not empty */ #define SSP_SR_MASK_RFF (0x1UL << 3) /* Receive FIFO full */ #define SSP_SR_MASK_BSY (0x1UL << 4) /* Busy Flag */ /* * SSP Clock Prescale Register - SSP_CPSR */ #define SSP_CPSR_MASK_CPSDVSR (0xFFUL << 0) /* * SSP Interrupt Mask Set/Clear Register - SSP_IMSC */ #define SSP_IMSC_MASK_RORIM (0x1UL << 0) /* Receive Overrun Interrupt mask */ #define SSP_IMSC_MASK_RTIM (0x1UL << 1) /* Receive timeout Interrupt mask */ #define SSP_IMSC_MASK_RXIM (0x1UL << 2) /* Receive FIFO Interrupt mask */ #define SSP_IMSC_MASK_TXIM (0x1UL << 3) /* Transmit FIFO Interrupt mask */ /* * SSP Raw Interrupt Status Register - SSP_RIS */ /* Receive Overrun Raw Interrupt status */ #define SSP_RIS_MASK_RORRIS (0x1UL << 0) /* Receive Timeout Raw Interrupt status */ #define SSP_RIS_MASK_RTRIS (0x1UL << 1) /* Receive FIFO Raw Interrupt status */ #define SSP_RIS_MASK_RXRIS (0x1UL << 2) /* Transmit FIFO Raw Interrupt status */ #define SSP_RIS_MASK_TXRIS (0x1UL << 3) /* * SSP Masked Interrupt Status Register - SSP_MIS */ /* Receive Overrun Masked Interrupt status */ #define SSP_MIS_MASK_RORMIS (0x1UL << 0) /* Receive Timeout Masked Interrupt status */ #define SSP_MIS_MASK_RTMIS (0x1UL << 1) /* Receive FIFO Masked Interrupt status */ #define SSP_MIS_MASK_RXMIS (0x1UL << 2) /* Transmit FIFO Masked Interrupt status */ #define SSP_MIS_MASK_TXMIS (0x1UL << 3) /* * SSP Interrupt Clear Register - SSP_ICR */ /* Receive Overrun Raw Clear Interrupt bit */ #define SSP_ICR_MASK_RORIC (0x1UL << 0) /* Receive Timeout Clear Interrupt bit */ #define SSP_ICR_MASK_RTIC (0x1UL << 1) /* * SSP DMA Control Register - SSP_DMACR */ /* Receive DMA Enable bit */ #define SSP_DMACR_MASK_RXDMAE (0x1UL << 0) /* Transmit DMA Enable bit */ #define SSP_DMACR_MASK_TXDMAE (0x1UL << 1) /* * SSP Chip Select Control Register - SSP_CSR * (vendor extension) */ #define SSP_CSR_CSVALUE_MASK (0x1FUL << 0) /* * SSP Integration Test control Register - SSP_ITCR */ #define SSP_ITCR_MASK_ITEN (0x1UL << 0) #define SSP_ITCR_MASK_TESTFIFO (0x1UL << 1) /* * SSP Integration Test Input Register - SSP_ITIP */ #define ITIP_MASK_SSPRXD (0x1UL << 0) #define ITIP_MASK_SSPFSSIN (0x1UL << 1) #define ITIP_MASK_SSPCLKIN (0x1UL << 2) #define ITIP_MASK_RXDMAC (0x1UL << 3) #define ITIP_MASK_TXDMAC (0x1UL << 4) #define ITIP_MASK_SSPTXDIN (0x1UL << 5) /* * SSP Integration Test output Register - SSP_ITOP */ #define ITOP_MASK_SSPTXD (0x1UL << 0) #define ITOP_MASK_SSPFSSOUT (0x1UL << 1) #define ITOP_MASK_SSPCLKOUT (0x1UL << 2) #define ITOP_MASK_SSPOEn (0x1UL << 3) #define ITOP_MASK_SSPCTLOEn (0x1UL << 4) #define ITOP_MASK_RORINTR (0x1UL << 5) #define ITOP_MASK_RTINTR (0x1UL << 6) #define ITOP_MASK_RXINTR (0x1UL << 7) #define ITOP_MASK_TXINTR (0x1UL << 8) #define ITOP_MASK_INTR (0x1UL << 9) #define ITOP_MASK_RXDMABREQ (0x1UL << 10) #define ITOP_MASK_RXDMASREQ (0x1UL << 11) #define ITOP_MASK_TXDMABREQ (0x1UL << 12) #define ITOP_MASK_TXDMASREQ (0x1UL << 13) /* * SSP Test Data Register - SSP_TDR */ #define TDR_MASK_TESTDATA (0xFFFFFFFF) /* * Message State * we use the spi_message.state (void *) pointer to * hold a single state value, that's why all this * (void *) casting is done here. */ #define STATE_START ((void *) 0) #define STATE_RUNNING ((void *) 1) #define STATE_DONE ((void *) 2) #define STATE_ERROR ((void *) -1) /* * SSP State - Whether Enabled or Disabled */ #define SSP_DISABLED (0) #define SSP_ENABLED (1) /* * SSP DMA State - Whether DMA Enabled or Disabled */ #define SSP_DMA_DISABLED (0) #define SSP_DMA_ENABLED (1) /* * SSP Clock Defaults */ #define SSP_DEFAULT_CLKRATE 0x2 #define SSP_DEFAULT_PRESCALE 0x40 /* * SSP Clock Parameter ranges */ #define CPSDVR_MIN 0x02 #define CPSDVR_MAX 0xFE #define SCR_MIN 0x00 #define SCR_MAX 0xFF /* * SSP Interrupt related Macros */ #define DEFAULT_SSP_REG_IMSC 0x0UL #define DISABLE_ALL_INTERRUPTS DEFAULT_SSP_REG_IMSC #define ENABLE_ALL_INTERRUPTS ( \ SSP_IMSC_MASK_RORIM | \ SSP_IMSC_MASK_RTIM | \ SSP_IMSC_MASK_RXIM | \ SSP_IMSC_MASK_TXIM \ ) #define CLEAR_ALL_INTERRUPTS 0x3 #define SPI_POLLING_TIMEOUT 1000 /* * The type of reading going on on this chip */ enum ssp_reading { READING_NULL, READING_U8, READING_U16, READING_U32 }; /** * The type of writing going on on this chip */ enum ssp_writing { WRITING_NULL, WRITING_U8, WRITING_U16, WRITING_U32 }; /** * struct vendor_data - vendor-specific config parameters * for PL022 derivates * @fifodepth: depth of FIFOs (both) * @max_bpw: maximum number of bits per word * @unidir: supports unidirection transfers * @extended_cr: 32 bit wide control register 0 with extra * features and extra features in CR1 as found in the ST variants * @pl023: supports a subset of the ST extensions called "PL023" * @internal_cs_ctrl: supports chip select control register */ struct vendor_data { int fifodepth; int max_bpw; bool unidir; bool extended_cr; bool pl023; bool loopback; bool internal_cs_ctrl; }; /** * struct pl022 - This is the private SSP driver data structure * @adev: AMBA device model hookup * @vendor: vendor data for the IP block * @phybase: the physical memory where the SSP device resides * @virtbase: the virtual memory where the SSP is mapped * @clk: outgoing clock "SPICLK" for the SPI bus * @master: SPI framework hookup * @master_info: controller-specific data from machine setup * @pump_transfers: Tasklet used in Interrupt Transfer mode * @cur_msg: Pointer to current spi_message being processed * @cur_transfer: Pointer to current spi_transfer * @cur_chip: pointer to current clients chip(assigned from controller_state) * @next_msg_cs_active: the next message in the queue has been examined * and it was found that it uses the same chip select as the previous * message, so we left it active after the previous transfer, and it's * active already. * @tx: current position in TX buffer to be read * @tx_end: end position in TX buffer to be read * @rx: current position in RX buffer to be written * @rx_end: end position in RX buffer to be written * @read: the type of read currently going on * @write: the type of write currently going on * @exp_fifo_level: expected FIFO level * @dma_rx_channel: optional channel for RX DMA * @dma_tx_channel: optional channel for TX DMA * @sgt_rx: scattertable for the RX transfer * @sgt_tx: scattertable for the TX transfer * @dummypage: a dummy page used for driving data on the bus with DMA * @cur_cs: current chip select (gpio) * @chipselects: list of chipselects (gpios) */ struct pl022 { struct amba_device *adev; struct vendor_data *vendor; resource_size_t phybase; void __iomem *virtbase; struct clk *clk; struct spi_master *master; struct pl022_ssp_controller *master_info; /* Message per-transfer pump */ struct tasklet_struct pump_transfers; struct spi_message *cur_msg; struct spi_transfer *cur_transfer; struct chip_data *cur_chip; bool next_msg_cs_active; void *tx; void *tx_end; void *rx; void *rx_end; enum ssp_reading read; enum ssp_writing write; u32 exp_fifo_level; enum ssp_rx_level_trig rx_lev_trig; enum ssp_tx_level_trig tx_lev_trig; /* DMA settings */ #ifdef CONFIG_DMA_ENGINE struct dma_chan *dma_rx_channel; struct dma_chan *dma_tx_channel; struct sg_table sgt_rx; struct sg_table sgt_tx; char *dummypage; bool dma_running; #endif int cur_cs; int *chipselects; }; /** * struct chip_data - To maintain runtime state of SSP for each client chip * @cr0: Value of control register CR0 of SSP - on later ST variants this * register is 32 bits wide rather than just 16 * @cr1: Value of control register CR1 of SSP * @dmacr: Value of DMA control Register of SSP * @cpsr: Value of Clock prescale register * @n_bytes: how many bytes(power of 2) reqd for a given data width of client * @enable_dma: Whether to enable DMA or not * @read: function ptr to be used to read when doing xfer for this chip * @write: function ptr to be used to write when doing xfer for this chip * @cs_control: chip select callback provided by chip * @xfer_type: polling/interrupt/DMA * * Runtime state of the SSP controller, maintained per chip, * This would be set according to the current message that would be served */ struct chip_data { u32 cr0; u16 cr1; u16 dmacr; u16 cpsr; u8 n_bytes; bool enable_dma; enum ssp_reading read; enum ssp_writing write; void (*cs_control) (u32 command); int xfer_type; }; /** * null_cs_control - Dummy chip select function * @command: select/delect the chip * * If no chip select function is provided by client this is used as dummy * chip select */ static void null_cs_control(u32 command) { pr_debug("pl022: dummy chip select control, CS=0x%x\n", command); } /** * internal_cs_control - Control chip select signals via SSP_CSR. * @pl022: SSP driver private data structure * @command: select/delect the chip * * Used on controller with internal chip select control via SSP_CSR register * (vendor extension). Each of the 5 LSB in the register controls one chip * select signal. */ static void internal_cs_control(struct pl022 *pl022, u32 command) { u32 tmp; tmp = readw(SSP_CSR(pl022->virtbase)); if (command == SSP_CHIP_SELECT) tmp &= ~BIT(pl022->cur_cs); else tmp |= BIT(pl022->cur_cs); writew(tmp, SSP_CSR(pl022->virtbase)); } static void pl022_cs_control(struct pl022 *pl022, u32 command) { if (pl022->vendor->internal_cs_ctrl) internal_cs_control(pl022, command); else if (gpio_is_valid(pl022->cur_cs)) gpio_set_value(pl022->cur_cs, command); else pl022->cur_chip->cs_control(command); } /** * giveback - current spi_message is over, schedule next message and call * callback of this message. Assumes that caller already * set message->status; dma and pio irqs are blocked * @pl022: SSP driver private data structure */ static void giveback(struct pl022 *pl022) { struct spi_transfer *last_transfer; pl022->next_msg_cs_active = false; last_transfer = list_last_entry(&pl022->cur_msg->transfers, struct spi_transfer, transfer_list); /* Delay if requested before any change in chip select */ if (last_transfer->delay_usecs) /* * FIXME: This runs in interrupt context. * Is this really smart? */ udelay(last_transfer->delay_usecs); if (!last_transfer->cs_change) { struct spi_message *next_msg; /* * cs_change was not set. We can keep the chip select * enabled if there is message in the queue and it is * for the same spi device. * * We cannot postpone this until pump_messages, because * after calling msg->complete (below) the driver that * sent the current message could be unloaded, which * could invalidate the cs_control() callback... */ /* get a pointer to the next message, if any */ next_msg = spi_get_next_queued_message(pl022->master); /* * see if the next and current messages point * to the same spi device. */ if (next_msg && next_msg->spi != pl022->cur_msg->spi) next_msg = NULL; if (!next_msg || pl022->cur_msg->state == STATE_ERROR) pl022_cs_control(pl022, SSP_CHIP_DESELECT); else pl022->next_msg_cs_active = true; } pl022->cur_msg = NULL; pl022->cur_transfer = NULL; pl022->cur_chip = NULL; /* disable the SPI/SSP operation */ writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase)); spi_finalize_current_message(pl022->master); } /** * flush - flush the FIFO to reach a clean state * @pl022: SSP driver private data structure */ static int flush(struct pl022 *pl022) { unsigned long limit = loops_per_jiffy << 1; dev_dbg(&pl022->adev->dev, "flush\n"); do { while (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE) readw(SSP_DR(pl022->virtbase)); } while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_BSY) && limit--); pl022->exp_fifo_level = 0; return limit; } /** * restore_state - Load configuration of current chip * @pl022: SSP driver private data structure */ static void restore_state(struct pl022 *pl022) { struct chip_data *chip = pl022->cur_chip; if (pl022->vendor->extended_cr) writel(chip->cr0, SSP_CR0(pl022->virtbase)); else writew(chip->cr0, SSP_CR0(pl022->virtbase)); writew(chip->cr1, SSP_CR1(pl022->virtbase)); writew(chip->dmacr, SSP_DMACR(pl022->virtbase)); writew(chip->cpsr, SSP_CPSR(pl022->virtbase)); writew(DISABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase)); writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase)); } /* * Default SSP Register Values */ #define DEFAULT_SSP_REG_CR0 ( \ GEN_MASK_BITS(SSP_DATA_BITS_12, SSP_CR0_MASK_DSS, 0) | \ GEN_MASK_BITS(SSP_INTERFACE_MOTOROLA_SPI, SSP_CR0_MASK_FRF, 4) | \ GEN_MASK_BITS(SSP_CLK_POL_IDLE_LOW, SSP_CR0_MASK_SPO, 6) | \ GEN_MASK_BITS(SSP_CLK_SECOND_EDGE, SSP_CR0_MASK_SPH, 7) | \ GEN_MASK_BITS(SSP_DEFAULT_CLKRATE, SSP_CR0_MASK_SCR, 8) \ ) /* ST versions have slightly different bit layout */ #define DEFAULT_SSP_REG_CR0_ST ( \ GEN_MASK_BITS(SSP_DATA_BITS_12, SSP_CR0_MASK_DSS_ST, 0) | \ GEN_MASK_BITS(SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, SSP_CR0_MASK_HALFDUP_ST, 5) | \ GEN_MASK_BITS(SSP_CLK_POL_IDLE_LOW, SSP_CR0_MASK_SPO, 6) | \ GEN_MASK_BITS(SSP_CLK_SECOND_EDGE, SSP_CR0_MASK_SPH, 7) | \ GEN_MASK_BITS(SSP_DEFAULT_CLKRATE, SSP_CR0_MASK_SCR, 8) | \ GEN_MASK_BITS(SSP_BITS_8, SSP_CR0_MASK_CSS_ST, 16) | \ GEN_MASK_BITS(SSP_INTERFACE_MOTOROLA_SPI, SSP_CR0_MASK_FRF_ST, 21) \ ) /* The PL023 version is slightly different again */ #define DEFAULT_SSP_REG_CR0_ST_PL023 ( \ GEN_MASK_BITS(SSP_DATA_BITS_12, SSP_CR0_MASK_DSS_ST, 0) | \ GEN_MASK_BITS(SSP_CLK_POL_IDLE_LOW, SSP_CR0_MASK_SPO, 6) | \ GEN_MASK_BITS(SSP_CLK_SECOND_EDGE, SSP_CR0_MASK_SPH, 7) | \ GEN_MASK_BITS(SSP_DEFAULT_CLKRATE, SSP_CR0_MASK_SCR, 8) \ ) #define DEFAULT_SSP_REG_CR1 ( \ GEN_MASK_BITS(LOOPBACK_DISABLED, SSP_CR1_MASK_LBM, 0) | \ GEN_MASK_BITS(SSP_DISABLED, SSP_CR1_MASK_SSE, 1) | \ GEN_MASK_BITS(SSP_MASTER, SSP_CR1_MASK_MS, 2) | \ GEN_MASK_BITS(DO_NOT_DRIVE_TX, SSP_CR1_MASK_SOD, 3) \ ) /* ST versions extend this register to use all 16 bits */ #define DEFAULT_SSP_REG_CR1_ST ( \ DEFAULT_SSP_REG_CR1 | \ GEN_MASK_BITS(SSP_RX_MSB, SSP_CR1_MASK_RENDN_ST, 4) | \ GEN_MASK_BITS(SSP_TX_MSB, SSP_CR1_MASK_TENDN_ST, 5) | \ GEN_MASK_BITS(SSP_MWIRE_WAIT_ZERO, SSP_CR1_MASK_MWAIT_ST, 6) |\ GEN_MASK_BITS(SSP_RX_1_OR_MORE_ELEM, SSP_CR1_MASK_RXIFLSEL_ST, 7) | \ GEN_MASK_BITS(SSP_TX_1_OR_MORE_EMPTY_LOC, SSP_CR1_MASK_TXIFLSEL_ST, 10) \ ) /* * The PL023 variant has further differences: no loopback mode, no microwire * support, and a new clock feedback delay setting. */ #define DEFAULT_SSP_REG_CR1_ST_PL023 ( \ GEN_MASK_BITS(SSP_DISABLED, SSP_CR1_MASK_SSE, 1) | \ GEN_MASK_BITS(SSP_MASTER, SSP_CR1_MASK_MS, 2) | \ GEN_MASK_BITS(DO_NOT_DRIVE_TX, SSP_CR1_MASK_SOD, 3) | \ GEN_MASK_BITS(SSP_RX_MSB, SSP_CR1_MASK_RENDN_ST, 4) | \ GEN_MASK_BITS(SSP_TX_MSB, SSP_CR1_MASK_TENDN_ST, 5) | \ GEN_MASK_BITS(SSP_RX_1_OR_MORE_ELEM, SSP_CR1_MASK_RXIFLSEL_ST, 7) | \ GEN_MASK_BITS(SSP_TX_1_OR_MORE_EMPTY_LOC, SSP_CR1_MASK_TXIFLSEL_ST, 10) | \ GEN_MASK_BITS(SSP_FEEDBACK_CLK_DELAY_NONE, SSP_CR1_MASK_FBCLKDEL_ST, 13) \ ) #define DEFAULT_SSP_REG_CPSR ( \ GEN_MASK_BITS(SSP_DEFAULT_PRESCALE, SSP_CPSR_MASK_CPSDVSR, 0) \ ) #define DEFAULT_SSP_REG_DMACR (\ GEN_MASK_BITS(SSP_DMA_DISABLED, SSP_DMACR_MASK_RXDMAE, 0) | \ GEN_MASK_BITS(SSP_DMA_DISABLED, SSP_DMACR_MASK_TXDMAE, 1) \ ) /** * load_ssp_default_config - Load default configuration for SSP * @pl022: SSP driver private data structure */ static void load_ssp_default_config(struct pl022 *pl022) { if (pl022->vendor->pl023) { writel(DEFAULT_SSP_REG_CR0_ST_PL023, SSP_CR0(pl022->virtbase)); writew(DEFAULT_SSP_REG_CR1_ST_PL023, SSP_CR1(pl022->virtbase)); } else if (pl022->vendor->extended_cr) { writel(DEFAULT_SSP_REG_CR0_ST, SSP_CR0(pl022->virtbase)); writew(DEFAULT_SSP_REG_CR1_ST, SSP_CR1(pl022->virtbase)); } else { writew(DEFAULT_SSP_REG_CR0, SSP_CR0(pl022->virtbase)); writew(DEFAULT_SSP_REG_CR1, SSP_CR1(pl022->virtbase)); } writew(DEFAULT_SSP_REG_DMACR, SSP_DMACR(pl022->virtbase)); writew(DEFAULT_SSP_REG_CPSR, SSP_CPSR(pl022->virtbase)); writew(DISABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase)); writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase)); } /** * This will write to TX and read from RX according to the parameters * set in pl022. */ static void readwriter(struct pl022 *pl022) { /* * The FIFO depth is different between primecell variants. * I believe filling in too much in the FIFO might cause * errons in 8bit wide transfers on ARM variants (just 8 words * FIFO, means only 8x8 = 64 bits in FIFO) at least. * * To prevent this issue, the TX FIFO is only filled to the * unused RX FIFO fill length, regardless of what the TX * FIFO status flag indicates. */ dev_dbg(&pl022->adev->dev, "%s, rx: %p, rxend: %p, tx: %p, txend: %p\n", __func__, pl022->rx, pl022->rx_end, pl022->tx, pl022->tx_end); /* Read as much as you can */ while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE) && (pl022->rx < pl022->rx_end)) { switch (pl022->read) { case READING_NULL: readw(SSP_DR(pl022->virtbase)); break; case READING_U8: *(u8 *) (pl022->rx) = readw(SSP_DR(pl022->virtbase)) & 0xFFU; break; case READING_U16: *(u16 *) (pl022->rx) = (u16) readw(SSP_DR(pl022->virtbase)); break; case READING_U32: *(u32 *) (pl022->rx) = readl(SSP_DR(pl022->virtbase)); break; } pl022->rx += (pl022->cur_chip->n_bytes); pl022->exp_fifo_level--; } /* * Write as much as possible up to the RX FIFO size */ while ((pl022->exp_fifo_level < pl022->vendor->fifodepth) && (pl022->tx < pl022->tx_end)) { switch (pl022->write) { case WRITING_NULL: writew(0x0, SSP_DR(pl022->virtbase)); break; case WRITING_U8: writew(*(u8 *) (pl022->tx), SSP_DR(pl022->virtbase)); break; case WRITING_U16: writew((*(u16 *) (pl022->tx)), SSP_DR(pl022->virtbase)); break; case WRITING_U32: writel(*(u32 *) (pl022->tx), SSP_DR(pl022->virtbase)); break; } pl022->tx += (pl022->cur_chip->n_bytes); pl022->exp_fifo_level++; /* * This inner reader takes care of things appearing in the RX * FIFO as we're transmitting. This will happen a lot since the * clock starts running when you put things into the TX FIFO, * and then things are continuously clocked into the RX FIFO. */ while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE) && (pl022->rx < pl022->rx_end)) { switch (pl022->read) { case READING_NULL: readw(SSP_DR(pl022->virtbase)); break; case READING_U8: *(u8 *) (pl022->rx) = readw(SSP_DR(pl022->virtbase)) & 0xFFU; break; case READING_U16: *(u16 *) (pl022->rx) = (u16) readw(SSP_DR(pl022->virtbase)); break; case READING_U32: *(u32 *) (pl022->rx) = readl(SSP_DR(pl022->virtbase)); break; } pl022->rx += (pl022->cur_chip->n_bytes); pl022->exp_fifo_level--; } } /* * When we exit here the TX FIFO should be full and the RX FIFO * should be empty */ } /** * next_transfer - Move to the Next transfer in the current spi message * @pl022: SSP driver private data structure * * This function moves though the linked list of spi transfers in the * current spi message and returns with the state of current spi * message i.e whether its last transfer is done(STATE_DONE) or * Next transfer is ready(STATE_RUNNING) */ static void *next_transfer(struct pl022 *pl022) { struct spi_message *msg = pl022->cur_msg; struct spi_transfer *trans = pl022->cur_transfer; /* Move to next transfer */ if (trans->transfer_list.next != &msg->transfers) { pl022->cur_transfer = list_entry(trans->transfer_list.next, struct spi_transfer, transfer_list); return STATE_RUNNING; } return STATE_DONE; } /* * This DMA functionality is only compiled in if we have * access to the generic DMA devices/DMA engine. */ #ifdef CONFIG_DMA_ENGINE static void unmap_free_dma_scatter(struct pl022 *pl022) { /* Unmap and free the SG tables */ dma_unmap_sg(pl022->dma_tx_channel->device->dev, pl022->sgt_tx.sgl, pl022->sgt_tx.nents, DMA_TO_DEVICE); dma_unmap_sg(pl022->dma_rx_channel->device->dev, pl022->sgt_rx.sgl, pl022->sgt_rx.nents, DMA_FROM_DEVICE); sg_free_table(&pl022->sgt_rx); sg_free_table(&pl022->sgt_tx); } static void dma_callback(void *data) { struct pl022 *pl022 = data; struct spi_message *msg = pl022->cur_msg; BUG_ON(!pl022->sgt_rx.sgl); #ifdef VERBOSE_DEBUG /* * Optionally dump out buffers to inspect contents, this is * good if you want to convince yourself that the loopback * read/write contents are the same, when adopting to a new * DMA engine. */ { struct scatterlist *sg; unsigned int i; dma_sync_sg_for_cpu(&pl022->adev->dev, pl022->sgt_rx.sgl, pl022->sgt_rx.nents, DMA_FROM_DEVICE); for_each_sg(pl022->sgt_rx.sgl, sg, pl022->sgt_rx.nents, i) { dev_dbg(&pl022->adev->dev, "SPI RX SG ENTRY: %d", i); print_hex_dump(KERN_ERR, "SPI RX: ", DUMP_PREFIX_OFFSET, 16, 1, sg_virt(sg), sg_dma_len(sg), 1); } for_each_sg(pl022->sgt_tx.sgl, sg, pl022->sgt_tx.nents, i) { dev_dbg(&pl022->adev->dev, "SPI TX SG ENTRY: %d", i); print_hex_dump(KERN_ERR, "SPI TX: ", DUMP_PREFIX_OFFSET, 16, 1, sg_virt(sg), sg_dma_len(sg), 1); } } #endif unmap_free_dma_scatter(pl022); /* Update total bytes transferred */ msg->actual_length += pl022->cur_transfer->len; if (pl022->cur_transfer->cs_change) pl022_cs_control(pl022, SSP_CHIP_DESELECT); /* Move to next transfer */ msg->state = next_transfer(pl022); tasklet_schedule(&pl022->pump_transfers); } static void setup_dma_scatter(struct pl022 *pl022, void *buffer, unsigned int length, struct sg_table *sgtab) { struct scatterlist *sg; int bytesleft = length; void *bufp = buffer; int mapbytes; int i; if (buffer) { for_each_sg(sgtab->sgl, sg, sgtab->nents, i) { /* * If there are less bytes left than what fits * in the current page (plus page alignment offset) * we just feed in this, else we stuff in as much * as we can. */ if (bytesleft < (PAGE_SIZE - offset_in_page(bufp))) mapbytes = bytesleft; else mapbytes = PAGE_SIZE - offset_in_page(bufp); sg_set_page(sg, virt_to_page(bufp), mapbytes, offset_in_page(bufp)); bufp += mapbytes; bytesleft -= mapbytes; dev_dbg(&pl022->adev->dev, "set RX/TX target page @ %p, %d bytes, %d left\n", bufp, mapbytes, bytesleft); } } else { /* Map the dummy buffer on every page */ for_each_sg(sgtab->sgl, sg, sgtab->nents, i) { if (bytesleft < PAGE_SIZE) mapbytes = bytesleft; else mapbytes = PAGE_SIZE; sg_set_page(sg, virt_to_page(pl022->dummypage), mapbytes, 0); bytesleft -= mapbytes; dev_dbg(&pl022->adev->dev, "set RX/TX to dummy page %d bytes, %d left\n", mapbytes, bytesleft); } } BUG_ON(bytesleft); } /** * configure_dma - configures the channels for the next transfer * @pl022: SSP driver's private data structure */ static int configure_dma(struct pl022 *pl022) { struct dma_slave_config rx_conf = { .src_addr = SSP_DR(pl022->phybase), .direction = DMA_DEV_TO_MEM, .device_fc = false, }; struct dma_slave_config tx_conf = { .dst_addr = SSP_DR(pl022->phybase), .direction = DMA_MEM_TO_DEV, .device_fc = false, }; unsigned int pages; int ret; int rx_sglen, tx_sglen; struct dma_chan *rxchan = pl022->dma_rx_channel; struct dma_chan *txchan = pl022->dma_tx_channel; struct dma_async_tx_descriptor *rxdesc; struct dma_async_tx_descriptor *txdesc; /* Check that the channels are available */ if (!rxchan || !txchan) return -ENODEV; /* * If supplied, the DMA burstsize should equal the FIFO trigger level. * Notice that the DMA engine uses one-to-one mapping. Since we can * not trigger on 2 elements this needs explicit mapping rather than * calculation. */ switch (pl022->rx_lev_trig) { case SSP_RX_1_OR_MORE_ELEM: rx_conf.src_maxburst = 1; break; case SSP_RX_4_OR_MORE_ELEM: rx_conf.src_maxburst = 4; break; case SSP_RX_8_OR_MORE_ELEM: rx_conf.src_maxburst = 8; break; case SSP_RX_16_OR_MORE_ELEM: rx_conf.src_maxburst = 16; break; case SSP_RX_32_OR_MORE_ELEM: rx_conf.src_maxburst = 32; break; default: rx_conf.src_maxburst = pl022->vendor->fifodepth >> 1; break; } switch (pl022->tx_lev_trig) { case SSP_TX_1_OR_MORE_EMPTY_LOC: tx_conf.dst_maxburst = 1; break; case SSP_TX_4_OR_MORE_EMPTY_LOC: tx_conf.dst_maxburst = 4; break; case SSP_TX_8_OR_MORE_EMPTY_LOC: tx_conf.dst_maxburst = 8; break; case SSP_TX_16_OR_MORE_EMPTY_LOC: tx_conf.dst_maxburst = 16; break; case SSP_TX_32_OR_MORE_EMPTY_LOC: tx_conf.dst_maxburst = 32; break; default: tx_conf.dst_maxburst = pl022->vendor->fifodepth >> 1; break; } switch (pl022->read) { case READING_NULL: /* Use the same as for writing */ rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_UNDEFINED; break; case READING_U8: rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; break; case READING_U16: rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; break; case READING_U32: rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; break; } switch (pl022->write) { case WRITING_NULL: /* Use the same as for reading */ tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_UNDEFINED; break; case WRITING_U8: tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; break; case WRITING_U16: tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; break; case WRITING_U32: tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; break; } /* SPI pecularity: we need to read and write the same width */ if (rx_conf.src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) rx_conf.src_addr_width = tx_conf.dst_addr_width; if (tx_conf.dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) tx_conf.dst_addr_width = rx_conf.src_addr_width; BUG_ON(rx_conf.src_addr_width != tx_conf.dst_addr_width); dmaengine_slave_config(rxchan, &rx_conf); dmaengine_slave_config(txchan, &tx_conf); /* Create sglists for the transfers */ pages = DIV_ROUND_UP(pl022->cur_transfer->len, PAGE_SIZE); dev_dbg(&pl022->adev->dev, "using %d pages for transfer\n", pages); ret = sg_alloc_table(&pl022->sgt_rx, pages, GFP_ATOMIC); if (ret) goto err_alloc_rx_sg; ret = sg_alloc_table(&pl022->sgt_tx, pages, GFP_ATOMIC); if (ret) goto err_alloc_tx_sg; /* Fill in the scatterlists for the RX+TX buffers */ setup_dma_scatter(pl022, pl022->rx, pl022->cur_transfer->len, &pl022->sgt_rx); setup_dma_scatter(pl022, pl022->tx, pl022->cur_transfer->len, &pl022->sgt_tx); /* Map DMA buffers */ rx_sglen = dma_map_sg(rxchan->device->dev, pl022->sgt_rx.sgl, pl022->sgt_rx.nents, DMA_FROM_DEVICE); if (!rx_sglen) goto err_rx_sgmap; tx_sglen = dma_map_sg(txchan->device->dev, pl022->sgt_tx.sgl, pl022->sgt_tx.nents, DMA_TO_DEVICE); if (!tx_sglen) goto err_tx_sgmap; /* Send both scatterlists */ rxdesc = dmaengine_prep_slave_sg(rxchan, pl022->sgt_rx.sgl, rx_sglen, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!rxdesc) goto err_rxdesc; txdesc = dmaengine_prep_slave_sg(txchan, pl022->sgt_tx.sgl, tx_sglen, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!txdesc) goto err_txdesc; /* Put the callback on the RX transfer only, that should finish last */ rxdesc->callback = dma_callback; rxdesc->callback_param = pl022; /* Submit and fire RX and TX with TX last so we're ready to read! */ dmaengine_submit(rxdesc); dmaengine_submit(txdesc); dma_async_issue_pending(rxchan); dma_async_issue_pending(txchan); pl022->dma_running = true; return 0; err_txdesc: dmaengine_terminate_all(txchan); err_rxdesc: dmaengine_terminate_all(rxchan); dma_unmap_sg(txchan->device->dev, pl022->sgt_tx.sgl, pl022->sgt_tx.nents, DMA_TO_DEVICE); err_tx_sgmap: dma_unmap_sg(rxchan->device->dev, pl022->sgt_rx.sgl, pl022->sgt_rx.nents, DMA_FROM_DEVICE); err_rx_sgmap: sg_free_table(&pl022->sgt_tx); err_alloc_tx_sg: sg_free_table(&pl022->sgt_rx); err_alloc_rx_sg: return -ENOMEM; } static int pl022_dma_probe(struct pl022 *pl022) { dma_cap_mask_t mask; /* Try to acquire a generic DMA engine slave channel */ dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); /* * We need both RX and TX channels to do DMA, else do none * of them. */ pl022->dma_rx_channel = dma_request_channel(mask, pl022->master_info->dma_filter, pl022->master_info->dma_rx_param); if (!pl022->dma_rx_channel) { dev_dbg(&pl022->adev->dev, "no RX DMA channel!\n"); goto err_no_rxchan; } pl022->dma_tx_channel = dma_request_channel(mask, pl022->master_info->dma_filter, pl022->master_info->dma_tx_param); if (!pl022->dma_tx_channel) { dev_dbg(&pl022->adev->dev, "no TX DMA channel!\n"); goto err_no_txchan; } pl022->dummypage = kmalloc(PAGE_SIZE, GFP_KERNEL); if (!pl022->dummypage) goto err_no_dummypage; dev_info(&pl022->adev->dev, "setup for DMA on RX %s, TX %s\n", dma_chan_name(pl022->dma_rx_channel), dma_chan_name(pl022->dma_tx_channel)); return 0; err_no_dummypage: dma_release_channel(pl022->dma_tx_channel); err_no_txchan: dma_release_channel(pl022->dma_rx_channel); pl022->dma_rx_channel = NULL; err_no_rxchan: dev_err(&pl022->adev->dev, "Failed to work in dma mode, work without dma!\n"); return -ENODEV; } static int pl022_dma_autoprobe(struct pl022 *pl022) { struct device *dev = &pl022->adev->dev; struct dma_chan *chan; int err; /* automatically configure DMA channels from platform, normally using DT */ chan = dma_request_slave_channel_reason(dev, "rx"); if (IS_ERR(chan)) { err = PTR_ERR(chan); goto err_no_rxchan; } pl022->dma_rx_channel = chan; chan = dma_request_slave_channel_reason(dev, "tx"); if (IS_ERR(chan)) { err = PTR_ERR(chan); goto err_no_txchan; } pl022->dma_tx_channel = chan; pl022->dummypage = kmalloc(PAGE_SIZE, GFP_KERNEL); if (!pl022->dummypage) { err = -ENOMEM; goto err_no_dummypage; } return 0; err_no_dummypage: dma_release_channel(pl022->dma_tx_channel); pl022->dma_tx_channel = NULL; err_no_txchan: dma_release_channel(pl022->dma_rx_channel); pl022->dma_rx_channel = NULL; err_no_rxchan: return err; } static void terminate_dma(struct pl022 *pl022) { struct dma_chan *rxchan = pl022->dma_rx_channel; struct dma_chan *txchan = pl022->dma_tx_channel; dmaengine_terminate_all(rxchan); dmaengine_terminate_all(txchan); unmap_free_dma_scatter(pl022); pl022->dma_running = false; } static void pl022_dma_remove(struct pl022 *pl022) { if (pl022->dma_running) terminate_dma(pl022); if (pl022->dma_tx_channel) dma_release_channel(pl022->dma_tx_channel); if (pl022->dma_rx_channel) dma_release_channel(pl022->dma_rx_channel); kfree(pl022->dummypage); } #else static inline int configure_dma(struct pl022 *pl022) { return -ENODEV; } static inline int pl022_dma_autoprobe(struct pl022 *pl022) { return 0; } static inline int pl022_dma_probe(struct pl022 *pl022) { return 0; } static inline void pl022_dma_remove(struct pl022 *pl022) { } #endif /** * pl022_interrupt_handler - Interrupt handler for SSP controller * * This function handles interrupts generated for an interrupt based transfer. * If a receive overrun (ROR) interrupt is there then we disable SSP, flag the * current message's state as STATE_ERROR and schedule the tasklet * pump_transfers which will do the postprocessing of the current message by * calling giveback(). Otherwise it reads data from RX FIFO till there is no * more data, and writes data in TX FIFO till it is not full. If we complete * the transfer we move to the next transfer and schedule the tasklet. */ static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id) { struct pl022 *pl022 = dev_id; struct spi_message *msg = pl022->cur_msg; u16 irq_status = 0; if (unlikely(!msg)) { dev_err(&pl022->adev->dev, "bad message state in interrupt handler"); /* Never fail */ return IRQ_HANDLED; } /* Read the Interrupt Status Register */ irq_status = readw(SSP_MIS(pl022->virtbase)); if (unlikely(!irq_status)) return IRQ_NONE; /* * This handles the FIFO interrupts, the timeout * interrupts are flatly ignored, they cannot be * trusted. */ if (unlikely(irq_status & SSP_MIS_MASK_RORMIS)) { /* * Overrun interrupt - bail out since our Data has been * corrupted */ dev_err(&pl022->adev->dev, "FIFO overrun\n"); if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RFF) dev_err(&pl022->adev->dev, "RXFIFO is full\n"); /* * Disable and clear interrupts, disable SSP, * mark message with bad status so it can be * retried. */ writew(DISABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase)); writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase)); writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase)); msg->state = STATE_ERROR; /* Schedule message queue handler */ tasklet_schedule(&pl022->pump_transfers); return IRQ_HANDLED; } readwriter(pl022); if (pl022->tx == pl022->tx_end) { /* Disable Transmit interrupt, enable receive interrupt */ writew((readw(SSP_IMSC(pl022->virtbase)) & ~SSP_IMSC_MASK_TXIM) | SSP_IMSC_MASK_RXIM, SSP_IMSC(pl022->virtbase)); } /* * Since all transactions must write as much as shall be read, * we can conclude the entire transaction once RX is complete. * At this point, all TX will always be finished. */ if (pl022->rx >= pl022->rx_end) { writew(DISABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase)); writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase)); if (unlikely(pl022->rx > pl022->rx_end)) { dev_warn(&pl022->adev->dev, "read %u surplus " "bytes (did you request an odd " "number of bytes on a 16bit bus?)\n", (u32) (pl022->rx - pl022->rx_end)); } /* Update total bytes transferred */ msg->actual_length += pl022->cur_transfer->len; if (pl022->cur_transfer->cs_change) pl022_cs_control(pl022, SSP_CHIP_DESELECT); /* Move to next transfer */ msg->state = next_transfer(pl022); tasklet_schedule(&pl022->pump_transfers); return IRQ_HANDLED; } return IRQ_HANDLED; } /** * This sets up the pointers to memory for the next message to * send out on the SPI bus. */ static int set_up_next_transfer(struct pl022 *pl022, struct spi_transfer *transfer) { int residue; /* Sanity check the message for this bus width */ residue = pl022->cur_transfer->len % pl022->cur_chip->n_bytes; if (unlikely(residue != 0)) { dev_err(&pl022->adev->dev, "message of %u bytes to transmit but the current " "chip bus has a data width of %u bytes!\n", pl022->cur_transfer->len, pl022->cur_chip->n_bytes); dev_err(&pl022->adev->dev, "skipping this message\n"); return -EIO; } pl022->tx = (void *)transfer->tx_buf; pl022->tx_end = pl022->tx + pl022->cur_transfer->len; pl022->rx = (void *)transfer->rx_buf; pl022->rx_end = pl022->rx + pl022->cur_transfer->len; pl022->write = pl022->tx ? pl022->cur_chip->write : WRITING_NULL; pl022->read = pl022->rx ? pl022->cur_chip->read : READING_NULL; return 0; } /** * pump_transfers - Tasklet function which schedules next transfer * when running in interrupt or DMA transfer mode. * @data: SSP driver private data structure * */ static void pump_transfers(unsigned long data) { struct pl022 *pl022 = (struct pl022 *) data; struct spi_message *message = NULL; struct spi_transfer *transfer = NULL; struct spi_transfer *previous = NULL; /* Get current state information */ message = pl022->cur_msg; transfer = pl022->cur_transfer; /* Handle for abort */ if (message->state == STATE_ERROR) { message->status = -EIO; giveback(pl022); return; } /* Handle end of message */ if (message->state == STATE_DONE) { message->status = 0; giveback(pl022); return; } /* Delay if requested at end of transfer before CS change */ if (message->state == STATE_RUNNING) { previous = list_entry(transfer->transfer_list.prev, struct spi_transfer, transfer_list); if (previous->delay_usecs) /* * FIXME: This runs in interrupt context. * Is this really smart? */ udelay(previous->delay_usecs); /* Reselect chip select only if cs_change was requested */ if (previous->cs_change) pl022_cs_control(pl022, SSP_CHIP_SELECT); } else { /* STATE_START */ message->state = STATE_RUNNING; } if (set_up_next_transfer(pl022, transfer)) { message->state = STATE_ERROR; message->status = -EIO; giveback(pl022); return; } /* Flush the FIFOs and let's go! */ flush(pl022); if (pl022->cur_chip->enable_dma) { if (configure_dma(pl022)) { dev_dbg(&pl022->adev->dev, "configuration of DMA failed, fall back to interrupt mode\n"); goto err_config_dma; } return; } err_config_dma: /* enable all interrupts except RX */ writew(ENABLE_ALL_INTERRUPTS & ~SSP_IMSC_MASK_RXIM, SSP_IMSC(pl022->virtbase)); } static void do_interrupt_dma_transfer(struct pl022 *pl022) { /* * Default is to enable all interrupts except RX - * this will be enabled once TX is complete */ u32 irqflags = (u32)(ENABLE_ALL_INTERRUPTS & ~SSP_IMSC_MASK_RXIM); /* Enable target chip, if not already active */ if (!pl022->next_msg_cs_active) pl022_cs_control(pl022, SSP_CHIP_SELECT); if (set_up_next_transfer(pl022, pl022->cur_transfer)) { /* Error path */ pl022->cur_msg->state = STATE_ERROR; pl022->cur_msg->status = -EIO; giveback(pl022); return; } /* If we're using DMA, set up DMA here */ if (pl022->cur_chip->enable_dma) { /* Configure DMA transfer */ if (configure_dma(pl022)) { dev_dbg(&pl022->adev->dev, "configuration of DMA failed, fall back to interrupt mode\n"); goto err_config_dma; } /* Disable interrupts in DMA mode, IRQ from DMA controller */ irqflags = DISABLE_ALL_INTERRUPTS; } err_config_dma: /* Enable SSP, turn on interrupts */ writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE), SSP_CR1(pl022->virtbase)); writew(irqflags, SSP_IMSC(pl022->virtbase)); } static void do_polling_transfer(struct pl022 *pl022) { struct spi_message *message = NULL; struct spi_transfer *transfer = NULL; struct spi_transfer *previous = NULL; struct chip_data *chip; unsigned long time, timeout; chip = pl022->cur_chip; message = pl022->cur_msg; while (message->state != STATE_DONE) { /* Handle for abort */ if (message->state == STATE_ERROR) break; transfer = pl022->cur_transfer; /* Delay if requested at end of transfer */ if (message->state == STATE_RUNNING) { previous = list_entry(transfer->transfer_list.prev, struct spi_transfer, transfer_list); if (previous->delay_usecs) udelay(previous->delay_usecs); if (previous->cs_change) pl022_cs_control(pl022, SSP_CHIP_SELECT); } else { /* STATE_START */ message->state = STATE_RUNNING; if (!pl022->next_msg_cs_active) pl022_cs_control(pl022, SSP_CHIP_SELECT); } /* Configuration Changing Per Transfer */ if (set_up_next_transfer(pl022, transfer)) { /* Error path */ message->state = STATE_ERROR; break; } /* Flush FIFOs and enable SSP */ flush(pl022); writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE), SSP_CR1(pl022->virtbase)); dev_dbg(&pl022->adev->dev, "polling transfer ongoing ...\n"); timeout = jiffies + msecs_to_jiffies(SPI_POLLING_TIMEOUT); while (pl022->tx < pl022->tx_end || pl022->rx < pl022->rx_end) { time = jiffies; readwriter(pl022); if (time_after(time, timeout)) { dev_warn(&pl022->adev->dev, "%s: timeout!\n", __func__); message->state = STATE_ERROR; goto out; } cpu_relax(); } /* Update total byte transferred */ message->actual_length += pl022->cur_transfer->len; if (pl022->cur_transfer->cs_change) pl022_cs_control(pl022, SSP_CHIP_DESELECT); /* Move to next transfer */ message->state = next_transfer(pl022); } out: /* Handle end of message */ if (message->state == STATE_DONE) message->status = 0; else message->status = -EIO; giveback(pl022); return; } static int pl022_transfer_one_message(struct spi_master *master, struct spi_message *msg) { struct pl022 *pl022 = spi_master_get_devdata(master); /* Initial message state */ pl022->cur_msg = msg; msg->state = STATE_START; pl022->cur_transfer = list_entry(msg->transfers.next, struct spi_transfer, transfer_list); /* Setup the SPI using the per chip configuration */ pl022->cur_chip = spi_get_ctldata(msg->spi); pl022->cur_cs = pl022->chipselects[msg->spi->chip_select]; restore_state(pl022); flush(pl022); if (pl022->cur_chip->xfer_type == POLLING_TRANSFER) do_polling_transfer(pl022); else do_interrupt_dma_transfer(pl022); return 0; } static int pl022_unprepare_transfer_hardware(struct spi_master *master) { struct pl022 *pl022 = spi_master_get_devdata(master); /* nothing more to do - disable spi/ssp and power off */ writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase)); return 0; } static int verify_controller_parameters(struct pl022 *pl022, struct pl022_config_chip const *chip_info) { if ((chip_info->iface < SSP_INTERFACE_MOTOROLA_SPI) || (chip_info->iface > SSP_INTERFACE_UNIDIRECTIONAL)) { dev_err(&pl022->adev->dev, "interface is configured incorrectly\n"); return -EINVAL; } if ((chip_info->iface == SSP_INTERFACE_UNIDIRECTIONAL) && (!pl022->vendor->unidir)) { dev_err(&pl022->adev->dev, "unidirectional mode not supported in this " "hardware version\n"); return -EINVAL; } if ((chip_info->hierarchy != SSP_MASTER) && (chip_info->hierarchy != SSP_SLAVE)) { dev_err(&pl022->adev->dev, "hierarchy is configured incorrectly\n"); return -EINVAL; } if ((chip_info->com_mode != INTERRUPT_TRANSFER) && (chip_info->com_mode != DMA_TRANSFER) && (chip_info->com_mode != POLLING_TRANSFER)) { dev_err(&pl022->adev->dev, "Communication mode is configured incorrectly\n"); return -EINVAL; } switch (chip_info->rx_lev_trig) { case SSP_RX_1_OR_MORE_ELEM: case SSP_RX_4_OR_MORE_ELEM: case SSP_RX_8_OR_MORE_ELEM: /* These are always OK, all variants can handle this */ break; case SSP_RX_16_OR_MORE_ELEM: if (pl022->vendor->fifodepth < 16) { dev_err(&pl022->adev->dev, "RX FIFO Trigger Level is configured incorrectly\n"); return -EINVAL; } break; case SSP_RX_32_OR_MORE_ELEM: if (pl022->vendor->fifodepth < 32) { dev_err(&pl022->adev->dev, "RX FIFO Trigger Level is configured incorrectly\n"); return -EINVAL; } break; default: dev_err(&pl022->adev->dev, "RX FIFO Trigger Level is configured incorrectly\n"); return -EINVAL; } switch (chip_info->tx_lev_trig) { case SSP_TX_1_OR_MORE_EMPTY_LOC: case SSP_TX_4_OR_MORE_EMPTY_LOC: case SSP_TX_8_OR_MORE_EMPTY_LOC: /* These are always OK, all variants can handle this */ break; case SSP_TX_16_OR_MORE_EMPTY_LOC: if (pl022->vendor->fifodepth < 16) { dev_err(&pl022->adev->dev, "TX FIFO Trigger Level is configured incorrectly\n"); return -EINVAL; } break; case SSP_TX_32_OR_MORE_EMPTY_LOC: if (pl022->vendor->fifodepth < 32) { dev_err(&pl022->adev->dev, "TX FIFO Trigger Level is configured incorrectly\n"); return -EINVAL; } break; default: dev_err(&pl022->adev->dev, "TX FIFO Trigger Level is configured incorrectly\n"); return -EINVAL; } if (chip_info->iface == SSP_INTERFACE_NATIONAL_MICROWIRE) { if ((chip_info->ctrl_len < SSP_BITS_4) || (chip_info->ctrl_len > SSP_BITS_32)) { dev_err(&pl022->adev->dev, "CTRL LEN is configured incorrectly\n"); return -EINVAL; } if ((chip_info->wait_state != SSP_MWIRE_WAIT_ZERO) && (chip_info->wait_state != SSP_MWIRE_WAIT_ONE)) { dev_err(&pl022->adev->dev, "Wait State is configured incorrectly\n"); return -EINVAL; } /* Half duplex is only available in the ST Micro version */ if (pl022->vendor->extended_cr) { if ((chip_info->duplex != SSP_MICROWIRE_CHANNEL_FULL_DUPLEX) && (chip_info->duplex != SSP_MICROWIRE_CHANNEL_HALF_DUPLEX)) { dev_err(&pl022->adev->dev, "Microwire duplex mode is configured incorrectly\n"); return -EINVAL; } } else { if (chip_info->duplex != SSP_MICROWIRE_CHANNEL_FULL_DUPLEX) dev_err(&pl022->adev->dev, "Microwire half duplex mode requested," " but this is only available in the" " ST version of PL022\n"); return -EINVAL; } } return 0; } static inline u32 spi_rate(u32 rate, u16 cpsdvsr, u16 scr) { return rate / (cpsdvsr * (1 + scr)); } static int calculate_effective_freq(struct pl022 *pl022, int freq, struct ssp_clock_params * clk_freq) { /* Lets calculate the frequency parameters */ u16 cpsdvsr = CPSDVR_MIN, scr = SCR_MIN; u32 rate, max_tclk, min_tclk, best_freq = 0, best_cpsdvsr = 0, best_scr = 0, tmp, found = 0; rate = clk_get_rate(pl022->clk); /* cpsdvscr = 2 & scr 0 */ max_tclk = spi_rate(rate, CPSDVR_MIN, SCR_MIN); /* cpsdvsr = 254 & scr = 255 */ min_tclk = spi_rate(rate, CPSDVR_MAX, SCR_MAX); if (freq > max_tclk) dev_warn(&pl022->adev->dev, "Max speed that can be programmed is %d Hz, you requested %d\n", max_tclk, freq); if (freq < min_tclk) { dev_err(&pl022->adev->dev, "Requested frequency: %d Hz is less than minimum possible %d Hz\n", freq, min_tclk); return -EINVAL; } /* * best_freq will give closest possible available rate (<= requested * freq) for all values of scr & cpsdvsr. */ while ((cpsdvsr <= CPSDVR_MAX) && !found) { while (scr <= SCR_MAX) { tmp = spi_rate(rate, cpsdvsr, scr); if (tmp > freq) { /* we need lower freq */ scr++; continue; } /* * If found exact value, mark found and break. * If found more closer value, update and break. */ if (tmp > best_freq) { best_freq = tmp; best_cpsdvsr = cpsdvsr; best_scr = scr; if (tmp == freq) found = 1; } /* * increased scr will give lower rates, which are not * required */ break; } cpsdvsr += 2; scr = SCR_MIN; } WARN(!best_freq, "pl022: Matching cpsdvsr and scr not found for %d Hz rate \n", freq); clk_freq->cpsdvsr = (u8) (best_cpsdvsr & 0xFF); clk_freq->scr = (u8) (best_scr & 0xFF); dev_dbg(&pl022->adev->dev, "SSP Target Frequency is: %u, Effective Frequency is %u\n", freq, best_freq); dev_dbg(&pl022->adev->dev, "SSP cpsdvsr = %d, scr = %d\n", clk_freq->cpsdvsr, clk_freq->scr); return 0; } /* * A piece of default chip info unless the platform * supplies it. */ static const struct pl022_config_chip pl022_default_chip_info = { .com_mode = POLLING_TRANSFER, .iface = SSP_INTERFACE_MOTOROLA_SPI, .hierarchy = SSP_SLAVE, .slave_tx_disable = DO_NOT_DRIVE_TX, .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM, .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC, .ctrl_len = SSP_BITS_8, .wait_state = SSP_MWIRE_WAIT_ZERO, .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, .cs_control = null_cs_control, }; /** * pl022_setup - setup function registered to SPI master framework * @spi: spi device which is requesting setup * * This function is registered to the SPI framework for this SPI master * controller. If it is the first time when setup is called by this device, * this function will initialize the runtime state for this chip and save * the same in the device structure. Else it will update the runtime info * with the updated chip info. Nothing is really being written to the * controller hardware here, that is not done until the actual transfer * commence. */ static int pl022_setup(struct spi_device *spi) { struct pl022_config_chip const *chip_info; struct pl022_config_chip chip_info_dt; struct chip_data *chip; struct ssp_clock_params clk_freq = { .cpsdvsr = 0, .scr = 0}; int status = 0; struct pl022 *pl022 = spi_master_get_devdata(spi->master); unsigned int bits = spi->bits_per_word; u32 tmp; struct device_node *np = spi->dev.of_node; if (!spi->max_speed_hz) return -EINVAL; /* Get controller_state if one is supplied */ chip = spi_get_ctldata(spi); if (chip == NULL) { chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); if (!chip) return -ENOMEM; dev_dbg(&spi->dev, "allocated memory for controller's runtime state\n"); } /* Get controller data if one is supplied */ chip_info = spi->controller_data; if (chip_info == NULL) { if (np) { chip_info_dt = pl022_default_chip_info; chip_info_dt.hierarchy = SSP_MASTER; of_property_read_u32(np, "pl022,interface", &chip_info_dt.iface); of_property_read_u32(np, "pl022,com-mode", &chip_info_dt.com_mode); of_property_read_u32(np, "pl022,rx-level-trig", &chip_info_dt.rx_lev_trig); of_property_read_u32(np, "pl022,tx-level-trig", &chip_info_dt.tx_lev_trig); of_property_read_u32(np, "pl022,ctrl-len", &chip_info_dt.ctrl_len); of_property_read_u32(np, "pl022,wait-state", &chip_info_dt.wait_state); of_property_read_u32(np, "pl022,duplex", &chip_info_dt.duplex); chip_info = &chip_info_dt; } else { chip_info = &pl022_default_chip_info; /* spi_board_info.controller_data not is supplied */ dev_dbg(&spi->dev, "using default controller_data settings\n"); } } else dev_dbg(&spi->dev, "using user supplied controller_data settings\n"); /* * We can override with custom divisors, else we use the board * frequency setting */ if ((0 == chip_info->clk_freq.cpsdvsr) && (0 == chip_info->clk_freq.scr)) { status = calculate_effective_freq(pl022, spi->max_speed_hz, &clk_freq); if (status < 0) goto err_config_params; } else { memcpy(&clk_freq, &chip_info->clk_freq, sizeof(clk_freq)); if ((clk_freq.cpsdvsr % 2) != 0) clk_freq.cpsdvsr = clk_freq.cpsdvsr - 1; } if ((clk_freq.cpsdvsr < CPSDVR_MIN) || (clk_freq.cpsdvsr > CPSDVR_MAX)) { status = -EINVAL; dev_err(&spi->dev, "cpsdvsr is configured incorrectly\n"); goto err_config_params; } status = verify_controller_parameters(pl022, chip_info); if (status) { dev_err(&spi->dev, "controller data is incorrect"); goto err_config_params; } pl022->rx_lev_trig = chip_info->rx_lev_trig; pl022->tx_lev_trig = chip_info->tx_lev_trig; /* Now set controller state based on controller data */ chip->xfer_type = chip_info->com_mode; if (!chip_info->cs_control) { chip->cs_control = null_cs_control; if (!gpio_is_valid(pl022->chipselects[spi->chip_select])) dev_warn(&spi->dev, "invalid chip select\n"); } else chip->cs_control = chip_info->cs_control; /* Check bits per word with vendor specific range */ if ((bits <= 3) || (bits > pl022->vendor->max_bpw)) { status = -ENOTSUPP; dev_err(&spi->dev, "illegal data size for this controller!\n"); dev_err(&spi->dev, "This controller can only handle 4 <= n <= %d bit words\n", pl022->vendor->max_bpw); goto err_config_params; } else if (bits <= 8) { dev_dbg(&spi->dev, "4 <= n <=8 bits per word\n"); chip->n_bytes = 1; chip->read = READING_U8; chip->write = WRITING_U8; } else if (bits <= 16) { dev_dbg(&spi->dev, "9 <= n <= 16 bits per word\n"); chip->n_bytes = 2; chip->read = READING_U16; chip->write = WRITING_U16; } else { dev_dbg(&spi->dev, "17 <= n <= 32 bits per word\n"); chip->n_bytes = 4; chip->read = READING_U32; chip->write = WRITING_U32; } /* Now Initialize all register settings required for this chip */ chip->cr0 = 0; chip->cr1 = 0; chip->dmacr = 0; chip->cpsr = 0; if ((chip_info->com_mode == DMA_TRANSFER) && ((pl022->master_info)->enable_dma)) { chip->enable_dma = true; dev_dbg(&spi->dev, "DMA mode set in controller state\n"); SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED, SSP_DMACR_MASK_RXDMAE, 0); SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED, SSP_DMACR_MASK_TXDMAE, 1); } else { chip->enable_dma = false; dev_dbg(&spi->dev, "DMA mode NOT set in controller state\n"); SSP_WRITE_BITS(chip->dmacr, SSP_DMA_DISABLED, SSP_DMACR_MASK_RXDMAE, 0); SSP_WRITE_BITS(chip->dmacr, SSP_DMA_DISABLED, SSP_DMACR_MASK_TXDMAE, 1); } chip->cpsr = clk_freq.cpsdvsr; /* Special setup for the ST micro extended control registers */ if (pl022->vendor->extended_cr) { u32 etx; if (pl022->vendor->pl023) { /* These bits are only in the PL023 */ SSP_WRITE_BITS(chip->cr1, chip_info->clkdelay, SSP_CR1_MASK_FBCLKDEL_ST, 13); } else { /* These bits are in the PL022 but not PL023 */ SSP_WRITE_BITS(chip->cr0, chip_info->duplex, SSP_CR0_MASK_HALFDUP_ST, 5); SSP_WRITE_BITS(chip->cr0, chip_info->ctrl_len, SSP_CR0_MASK_CSS_ST, 16); SSP_WRITE_BITS(chip->cr0, chip_info->iface, SSP_CR0_MASK_FRF_ST, 21); SSP_WRITE_BITS(chip->cr1, chip_info->wait_state, SSP_CR1_MASK_MWAIT_ST, 6); } SSP_WRITE_BITS(chip->cr0, bits - 1, SSP_CR0_MASK_DSS_ST, 0); if (spi->mode & SPI_LSB_FIRST) { tmp = SSP_RX_LSB; etx = SSP_TX_LSB; } else { tmp = SSP_RX_MSB; etx = SSP_TX_MSB; } SSP_WRITE_BITS(chip->cr1, tmp, SSP_CR1_MASK_RENDN_ST, 4); SSP_WRITE_BITS(chip->cr1, etx, SSP_CR1_MASK_TENDN_ST, 5); SSP_WRITE_BITS(chip->cr1, chip_info->rx_lev_trig, SSP_CR1_MASK_RXIFLSEL_ST, 7); SSP_WRITE_BITS(chip->cr1, chip_info->tx_lev_trig, SSP_CR1_MASK_TXIFLSEL_ST, 10); } else { SSP_WRITE_BITS(chip->cr0, bits - 1, SSP_CR0_MASK_DSS, 0); SSP_WRITE_BITS(chip->cr0, chip_info->iface, SSP_CR0_MASK_FRF, 4); } /* Stuff that is common for all versions */ if (spi->mode & SPI_CPOL) tmp = SSP_CLK_POL_IDLE_HIGH; else tmp = SSP_CLK_POL_IDLE_LOW; SSP_WRITE_BITS(chip->cr0, tmp, SSP_CR0_MASK_SPO, 6); if (spi->mode & SPI_CPHA) tmp = SSP_CLK_SECOND_EDGE; else tmp = SSP_CLK_FIRST_EDGE; SSP_WRITE_BITS(chip->cr0, tmp, SSP_CR0_MASK_SPH, 7); SSP_WRITE_BITS(chip->cr0, clk_freq.scr, SSP_CR0_MASK_SCR, 8); /* Loopback is available on all versions except PL023 */ if (pl022->vendor->loopback) { if (spi->mode & SPI_LOOP) tmp = LOOPBACK_ENABLED; else tmp = LOOPBACK_DISABLED; SSP_WRITE_BITS(chip->cr1, tmp, SSP_CR1_MASK_LBM, 0); } SSP_WRITE_BITS(chip->cr1, SSP_DISABLED, SSP_CR1_MASK_SSE, 1); SSP_WRITE_BITS(chip->cr1, chip_info->hierarchy, SSP_CR1_MASK_MS, 2); SSP_WRITE_BITS(chip->cr1, chip_info->slave_tx_disable, SSP_CR1_MASK_SOD, 3); /* Save controller_state */ spi_set_ctldata(spi, chip); return status; err_config_params: spi_set_ctldata(spi, NULL); kfree(chip); return status; } /** * pl022_cleanup - cleanup function registered to SPI master framework * @spi: spi device which is requesting cleanup * * This function is registered to the SPI framework for this SPI master * controller. It will free the runtime state of chip. */ static void pl022_cleanup(struct spi_device *spi) { struct chip_data *chip = spi_get_ctldata(spi); spi_set_ctldata(spi, NULL); kfree(chip); } static struct pl022_ssp_controller * pl022_platform_data_dt_get(struct device *dev) { struct device_node *np = dev->of_node; struct pl022_ssp_controller *pd; u32 tmp = 0; if (!np) { dev_err(dev, "no dt node defined\n"); return NULL; } pd = devm_kzalloc(dev, sizeof(struct pl022_ssp_controller), GFP_KERNEL); if (!pd) return NULL; pd->bus_id = -1; pd->enable_dma = 1; of_property_read_u32(np, "num-cs", &tmp); pd->num_chipselect = tmp; of_property_read_u32(np, "pl022,autosuspend-delay", &pd->autosuspend_delay); pd->rt = of_property_read_bool(np, "pl022,rt"); return pd; } static int pl022_probe(struct amba_device *adev, const struct amba_id *id) { struct device *dev = &adev->dev; struct pl022_ssp_controller *platform_info = dev_get_platdata(&adev->dev); struct spi_master *master; struct pl022 *pl022 = NULL; /*Data for this driver */ struct device_node *np = adev->dev.of_node; int status = 0, i, num_cs; dev_info(&adev->dev, "ARM PL022 driver, device ID: 0x%08x\n", adev->periphid); if (!platform_info && IS_ENABLED(CONFIG_OF)) platform_info = pl022_platform_data_dt_get(dev); if (!platform_info) { dev_err(dev, "probe: no platform data defined\n"); return -ENODEV; } if (platform_info->num_chipselect) { num_cs = platform_info->num_chipselect; } else { dev_err(dev, "probe: no chip select defined\n"); return -ENODEV; } /* Allocate master with space for data */ master = spi_alloc_master(dev, sizeof(struct pl022)); if (master == NULL) { dev_err(&adev->dev, "probe - cannot alloc SPI master\n"); return -ENOMEM; } pl022 = spi_master_get_devdata(master); pl022->master = master; pl022->master_info = platform_info; pl022->adev = adev; pl022->vendor = id->data; pl022->chipselects = devm_kzalloc(dev, num_cs * sizeof(int), GFP_KERNEL); if (!pl022->chipselects) { status = -ENOMEM; goto err_no_mem; } /* * Bus Number Which has been Assigned to this SSP controller * on this board */ master->bus_num = platform_info->bus_id; master->num_chipselect = num_cs; master->cleanup = pl022_cleanup; master->setup = pl022_setup; master->auto_runtime_pm = true; master->transfer_one_message = pl022_transfer_one_message; master->unprepare_transfer_hardware = pl022_unprepare_transfer_hardware; master->rt = platform_info->rt; master->dev.of_node = dev->of_node; if (platform_info->num_chipselect && platform_info->chipselects) { for (i = 0; i < num_cs; i++) pl022->chipselects[i] = platform_info->chipselects[i]; } else if (pl022->vendor->internal_cs_ctrl) { for (i = 0; i < num_cs; i++) pl022->chipselects[i] = i; } else if (IS_ENABLED(CONFIG_OF)) { for (i = 0; i < num_cs; i++) { int cs_gpio = of_get_named_gpio(np, "cs-gpios", i); if (cs_gpio == -EPROBE_DEFER) { status = -EPROBE_DEFER; goto err_no_gpio; } pl022->chipselects[i] = cs_gpio; if (gpio_is_valid(cs_gpio)) { if (devm_gpio_request(dev, cs_gpio, "ssp-pl022")) dev_err(&adev->dev, "could not request %d gpio\n", cs_gpio); else if (gpio_direction_output(cs_gpio, 1)) dev_err(&adev->dev, "could not set gpio %d as output\n", cs_gpio); } } } /* * Supports mode 0-3, loopback, and active low CS. Transfers are * always MS bit first on the original pl022. */ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP; if (pl022->vendor->extended_cr) master->mode_bits |= SPI_LSB_FIRST; dev_dbg(&adev->dev, "BUSNO: %d\n", master->bus_num); status = amba_request_regions(adev, NULL); if (status) goto err_no_ioregion; pl022->phybase = adev->res.start; pl022->virtbase = devm_ioremap(dev, adev->res.start, resource_size(&adev->res)); if (pl022->virtbase == NULL) { status = -ENOMEM; goto err_no_ioremap; } dev_info(&adev->dev, "mapped registers from %pa to %p\n", &adev->res.start, pl022->virtbase); pl022->clk = devm_clk_get(&adev->dev, NULL); if (IS_ERR(pl022->clk)) { status = PTR_ERR(pl022->clk); dev_err(&adev->dev, "could not retrieve SSP/SPI bus clock\n"); goto err_no_clk; } status = clk_prepare_enable(pl022->clk); if (status) { dev_err(&adev->dev, "could not enable SSP/SPI bus clock\n"); goto err_no_clk_en; } /* Initialize transfer pump */ tasklet_init(&pl022->pump_transfers, pump_transfers, (unsigned long)pl022); /* Disable SSP */ writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase)); load_ssp_default_config(pl022); status = devm_request_irq(dev, adev->irq[0], pl022_interrupt_handler, 0, "pl022", pl022); if (status < 0) { dev_err(&adev->dev, "probe - cannot get IRQ (%d)\n", status); goto err_no_irq; } /* Get DMA channels, try autoconfiguration first */ status = pl022_dma_autoprobe(pl022); if (status == -EPROBE_DEFER) { dev_dbg(dev, "deferring probe to get DMA channel\n"); goto err_no_irq; } /* If that failed, use channels from platform_info */ if (status == 0) platform_info->enable_dma = 1; else if (platform_info->enable_dma) { status = pl022_dma_probe(pl022); if (status != 0) platform_info->enable_dma = 0; } /* Register with the SPI framework */ amba_set_drvdata(adev, pl022); status = devm_spi_register_master(&adev->dev, master); if (status != 0) { dev_err(&adev->dev, "probe - problem registering spi master\n"); goto err_spi_register; } dev_dbg(dev, "probe succeeded\n"); /* let runtime pm put suspend */ if (platform_info->autosuspend_delay > 0) { dev_info(&adev->dev, "will use autosuspend for runtime pm, delay %dms\n", platform_info->autosuspend_delay); pm_runtime_set_autosuspend_delay(dev, platform_info->autosuspend_delay); pm_runtime_use_autosuspend(dev); } pm_runtime_put(dev); return 0; err_spi_register: if (platform_info->enable_dma) pl022_dma_remove(pl022); err_no_irq: clk_disable_unprepare(pl022->clk); err_no_clk_en: err_no_clk: err_no_ioremap: amba_release_regions(adev); err_no_ioregion: err_no_gpio: err_no_mem: spi_master_put(master); return status; } static int pl022_remove(struct amba_device *adev) { struct pl022 *pl022 = amba_get_drvdata(adev); if (!pl022) return 0; /* * undo pm_runtime_put() in probe. I assume that we're not * accessing the primecell here. */ pm_runtime_get_noresume(&adev->dev); load_ssp_default_config(pl022); if (pl022->master_info->enable_dma) pl022_dma_remove(pl022); clk_disable_unprepare(pl022->clk); amba_release_regions(adev); tasklet_disable(&pl022->pump_transfers); return 0; } #ifdef CONFIG_PM_SLEEP static int pl022_suspend(struct device *dev) { struct pl022 *pl022 = dev_get_drvdata(dev); int ret; ret = spi_master_suspend(pl022->master); if (ret) { dev_warn(dev, "cannot suspend master\n"); return ret; } ret = pm_runtime_force_suspend(dev); if (ret) { spi_master_resume(pl022->master); return ret; } pinctrl_pm_select_sleep_state(dev); dev_dbg(dev, "suspended\n"); return 0; } static int pl022_resume(struct device *dev) { struct pl022 *pl022 = dev_get_drvdata(dev); int ret; ret = pm_runtime_force_resume(dev); if (ret) dev_err(dev, "problem resuming\n"); /* Start the queue running */ ret = spi_master_resume(pl022->master); if (ret) dev_err(dev, "problem starting queue (%d)\n", ret); else dev_dbg(dev, "resumed\n"); return ret; } #endif #ifdef CONFIG_PM static int pl022_runtime_suspend(struct device *dev) { struct pl022 *pl022 = dev_get_drvdata(dev); clk_disable_unprepare(pl022->clk); pinctrl_pm_select_idle_state(dev); return 0; } static int pl022_runtime_resume(struct device *dev) { struct pl022 *pl022 = dev_get_drvdata(dev); pinctrl_pm_select_default_state(dev); clk_prepare_enable(pl022->clk); return 0; } #endif static const struct dev_pm_ops pl022_dev_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(pl022_suspend, pl022_resume) SET_RUNTIME_PM_OPS(pl022_runtime_suspend, pl022_runtime_resume, NULL) }; static struct vendor_data vendor_arm = { .fifodepth = 8, .max_bpw = 16, .unidir = false, .extended_cr = false, .pl023 = false, .loopback = true, .internal_cs_ctrl = false, }; static struct vendor_data vendor_st = { .fifodepth = 32, .max_bpw = 32, .unidir = false, .extended_cr = true, .pl023 = false, .loopback = true, .internal_cs_ctrl = false, }; static struct vendor_data vendor_st_pl023 = { .fifodepth = 32, .max_bpw = 32, .unidir = false, .extended_cr = true, .pl023 = true, .loopback = false, .internal_cs_ctrl = false, }; static struct vendor_data vendor_lsi = { .fifodepth = 8, .max_bpw = 16, .unidir = false, .extended_cr = false, .pl023 = false, .loopback = true, .internal_cs_ctrl = true, }; static const struct amba_id pl022_ids[] = { { /* * ARM PL022 variant, this has a 16bit wide * and 8 locations deep TX/RX FIFO */ .id = 0x00041022, .mask = 0x000fffff, .data = &vendor_arm, }, { /* * ST Micro derivative, this has 32bit wide * and 32 locations deep TX/RX FIFO */ .id = 0x01080022, .mask = 0xffffffff, .data = &vendor_st, }, { /* * ST-Ericsson derivative "PL023" (this is not * an official ARM number), this is a PL022 SSP block * stripped to SPI mode only, it has 32bit wide * and 32 locations deep TX/RX FIFO but no extended * CR0/CR1 register */ .id = 0x00080023, .mask = 0xffffffff, .data = &vendor_st_pl023, }, { /* * PL022 variant that has a chip select control register whih * allows control of 5 output signals nCS[0:4]. */ .id = 0x000b6022, .mask = 0x000fffff, .data = &vendor_lsi, }, { 0, 0 }, }; MODULE_DEVICE_TABLE(amba, pl022_ids); static struct amba_driver pl022_driver = { .drv = { .name = "ssp-pl022", .pm = &pl022_dev_pm_ops, }, .id_table = pl022_ids, .probe = pl022_probe, .remove = pl022_remove, }; static int __init pl022_init(void) { return amba_driver_register(&pl022_driver); } subsys_initcall(pl022_init); static void __exit pl022_exit(void) { amba_driver_unregister(&pl022_driver); } module_exit(pl022_exit); MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>"); MODULE_DESCRIPTION("PL022 SSP Controller Driver"); MODULE_LICENSE("GPL"); |