/*
 * NetLabel Management Support
 *
 * This file defines the management functions for the NetLabel system.  The
 * NetLabel system manages static and dynamic label mappings for network
 * protocols such as CIPSO and RIPSO.
 *
 * Author: Paul Moore <paul@paul-moore.com>
 *
 */

/*
 * (c) Copyright Hewlett-Packard Development Company, L.P., 2006
 *
 * This program is free software;  you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY;  without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
 * the GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program;  if not, see <http://www.gnu.org/licenses/>.
 *
 */

#ifndef _NETLABEL_MGMT_H
#define _NETLABEL_MGMT_H

#include <net/netlabel.h>
#include <linux/atomic.h>

/*
 * The following NetLabel payloads are supported by the management interface.
 *
 * o ADD:
 *   Sent by an application to add a domain mapping to the NetLabel system.
 *
 *   Required attributes:
 *
 *     NLBL_MGMT_A_DOMAIN
 *     NLBL_MGMT_A_PROTOCOL
 *
 *   If IPv4 is specified the following attributes are required:
 *
 *     NLBL_MGMT_A_IPV4ADDR
 *     NLBL_MGMT_A_IPV4MASK
 *
 *   If IPv6 is specified the following attributes are required:
 *
 *     NLBL_MGMT_A_IPV6ADDR
 *     NLBL_MGMT_A_IPV6MASK
 *
 *   If using NETLBL_NLTYPE_CIPSOV4 the following attributes are required:
 *
 *     NLBL_MGMT_A_CV4DOI
 *
 *   If using NETLBL_NLTYPE_UNLABELED no other attributes are required,
 *   however the following attribute may optionally be sent:
 *
 *     NLBL_MGMT_A_FAMILY
 *
 * o REMOVE:
 *   Sent by an application to remove a domain mapping from the NetLabel
 *   system.
 *
 *   Required attributes:
 *
 *     NLBL_MGMT_A_DOMAIN
 *
 * o LISTALL:
 *   This message can be sent either from an application or by the kernel in
 *   response to an application generated LISTALL message.  When sent by an
 *   application there is no payload and the NLM_F_DUMP flag should be set.
 *   The kernel should respond with a series of the following messages.
 *
 *   Required attributes:
 *
 *     NLBL_MGMT_A_DOMAIN
 *     NLBL_MGMT_A_FAMILY
 *
 *   If the IP address selectors are not used the following attribute is
 *   required:
 *
 *     NLBL_MGMT_A_PROTOCOL
 *
 *   If the IP address selectors are used then the following attritbute is
 *   required:
 *
 *     NLBL_MGMT_A_SELECTORLIST
 *
 *   If the mapping is using the NETLBL_NLTYPE_CIPSOV4 type then the following
 *   attributes are required:
 *
 *     NLBL_MGMT_A_CV4DOI
 *
 *   If the mapping is using the NETLBL_NLTYPE_UNLABELED type no other
 *   attributes are required.
 *
 * o ADDDEF:
 *   Sent by an application to set the default domain mapping for the NetLabel
 *   system.
 *
 *   Required attributes:
 *
 *     NLBL_MGMT_A_PROTOCOL
 *
 *   If using NETLBL_NLTYPE_CIPSOV4 the following attributes are required:
 *
 *     NLBL_MGMT_A_CV4DOI
 *
 *   If using NETLBL_NLTYPE_UNLABELED no other attributes are required,
 *   however the following attribute may optionally be sent:
 *
 *     NLBL_MGMT_A_FAMILY
 *
 * o REMOVEDEF:
 *   Sent by an application to remove the default domain mapping from the
 *   NetLabel system, there is no payload.
 *
 * o LISTDEF:
 *   This message can be sent either from an application or by the kernel in
 *   response to an application generated LISTDEF message.  When sent by an
 *   application there may be an optional payload.
 *
 *     NLBL_MGMT_A_FAMILY
 *
 *   On success the kernel should send a response using the following format:
 *
 *   If the IP address selectors are not used the following attributes are
 *   required:
 *
 *     NLBL_MGMT_A_PROTOCOL
 *     NLBL_MGMT_A_FAMILY
 *
 *   If the IP address selectors are used then the following attritbute is
 *   required:
 *
 *     NLBL_MGMT_A_SELECTORLIST
 *
 *   If the mapping is using the NETLBL_NLTYPE_CIPSOV4 type then the following
 *   attributes are required:
 *
 *     NLBL_MGMT_A_CV4DOI
 *
 *   If the mapping is using the NETLBL_NLTYPE_UNLABELED type no other
 *   attributes are required.
 *
 * o PROTOCOLS:
 *   Sent by an application to request a list of configured NetLabel protocols
 *   in the kernel.  When sent by an application there is no payload and the
 *   NLM_F_DUMP flag should be set.  The kernel should respond with a series of
 *   the following messages.
 *
 *   Required attributes:
 *
 *     NLBL_MGMT_A_PROTOCOL
 *
 * o VERSION:
 *   Sent by an application to request the NetLabel version.  When sent by an
 *   application there is no payload.  This message type is also used by the
 *   kernel to respond to an VERSION request.
 *
 *   Required attributes:
 *
 *     NLBL_MGMT_A_VERSION
 *
 */

/* NetLabel Management commands */
enum {
	NLBL_MGMT_C_UNSPEC,
	NLBL_MGMT_C_ADD,
	NLBL_MGMT_C_REMOVE,
	NLBL_MGMT_C_LISTALL,
	NLBL_MGMT_C_ADDDEF,
	NLBL_MGMT_C_REMOVEDEF,
	NLBL_MGMT_C_LISTDEF,
	NLBL_MGMT_C_PROTOCOLS,
	NLBL_MGMT_C_VERSION,
	__NLBL_MGMT_C_MAX,
};

/* NetLabel Management attributes */
enum {
	NLBL_MGMT_A_UNSPEC,
	NLBL_MGMT_A_DOMAIN,
	/* (NLA_NUL_STRING)
	 * the NULL terminated LSM domain string */
	NLBL_MGMT_A_PROTOCOL,
	/* (NLA_U32)
	 * the NetLabel protocol type (defined by NETLBL_NLTYPE_*) */
	NLBL_MGMT_A_VERSION,
	/* (NLA_U32)
	 * the NetLabel protocol version number (defined by
	 * NETLBL_PROTO_VERSION) */
	NLBL_MGMT_A_CV4DOI,
	/* (NLA_U32)
	 * the CIPSOv4 DOI value */
	NLBL_MGMT_A_IPV6ADDR,
	/* (NLA_BINARY, struct in6_addr)
	 * an IPv6 address */
	NLBL_MGMT_A_IPV6MASK,
	/* (NLA_BINARY, struct in6_addr)
	 * an IPv6 address mask */
	NLBL_MGMT_A_IPV4ADDR,
	/* (NLA_BINARY, struct in_addr)
	 * an IPv4 address */
	NLBL_MGMT_A_IPV4MASK,
	/* (NLA_BINARY, struct in_addr)
	 * and IPv4 address mask */
	NLBL_MGMT_A_ADDRSELECTOR,
	/* (NLA_NESTED)
	 * an IP address selector, must contain an address, mask, and protocol
	 * attribute plus any protocol specific attributes */
	NLBL_MGMT_A_SELECTORLIST,
	/* (NLA_NESTED)
	 * the selector list, there must be at least one
	 * NLBL_MGMT_A_ADDRSELECTOR attribute */
	NLBL_MGMT_A_FAMILY,
	/* (NLA_U16)
	 * The address family */
	NLBL_MGMT_A_CLPDOI,
	/* (NLA_U32)
	 * the CALIPSO DOI value */
	__NLBL_MGMT_A_MAX,
};
#define NLBL_MGMT_A_MAX (__NLBL_MGMT_A_MAX - 1)

/* NetLabel protocol functions */
int netlbl_mgmt_genl_init(void);

/* NetLabel configured protocol reference counter */
extern atomic_t netlabel_mgmt_protocount;

#endif