Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 | /* * Copyright 2015 Boundary Devices, Inc. * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual * licensing only applies to this file, and not this project as a * whole. * * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * * This file is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following * conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> / { chosen { stdout-path = &uart2; }; memory { reg = <0x10000000 0xF0000000>; }; regulators { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; reg_1p8v: regulator@0 { compatible = "regulator-fixed"; reg = <0>; regulator-name = "1P8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; reg_2p5v: regulator@1 { compatible = "regulator-fixed"; reg = <1>; regulator-name = "2P5V"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-always-on; }; reg_3p3v: regulator@2 { compatible = "regulator-fixed"; reg = <2>; regulator-name = "3P3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; reg_usb_otg_vbus: regulator@3 { compatible = "regulator-fixed"; reg = <3>; regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; }; reg_usb_h1_vbus: regulator@4 { compatible = "regulator-fixed"; reg = <4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; regulator-name = "usb_h1_vbus"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; enable-active-high; }; reg_wlan_vmmc: regulator@5 { compatible = "regulator-fixed"; reg = <5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wlan_vmmc>; regulator-name = "reg_wlan_vmmc"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>; startup-delay-us = <70000>; enable-active-high; }; reg_can_xcvr: regulator@6 { compatible = "regulator-fixed"; reg = <6>; regulator-name = "CAN XCVR"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can_xcvr>; gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; }; }; gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; power { label = "Power Button"; gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; wakeup-source; }; menu { label = "Menu"; gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_MENU>; }; home { label = "Home"; gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; }; back { label = "Back"; gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; }; volume-up { label = "Volume Up"; gpios = <&gpio7 13 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; volume-down { label = "Volume Down"; gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; }; }; i2cmux@2 { compatible = "i2c-mux-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2mux>; #address-cells = <1>; #size-cells = <0>; mux-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH &gpio4 15 GPIO_ACTIVE_HIGH>; i2c-parent = <&i2c2>; idle-state = <0>; i2c2@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; }; i2c2@2 { reg = <2>; #address-cells = <1>; #size-cells = <0>; }; }; i2cmux@3 { compatible = "i2c-mux-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3mux>; #address-cells = <1>; #size-cells = <0>; mux-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; i2c-parent = <&i2c3>; idle-state = <0>; i2c3@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; }; }; leds { compatible = "gpio-leds"; speaker-enable { gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; retain-state-suspended; default-state = "off"; }; ttymxc4-rs232 { gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; retain-state-suspended; default-state = "on"; }; }; backlight_lcd: backlight-lcd { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; power-supply = <®_3p3v>; status = "okay"; }; backlight_lvds0: backlight-lvds0 { compatible = "pwm-backlight"; pwms = <&pwm4 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; power-supply = <®_3p3v>; status = "okay"; }; backlight_lvds1: backlight-lvds1 { compatible = "pwm-backlight"; pwms = <&pwm2 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; power-supply = <®_3p3v>; status = "okay"; }; lcd_display: display@di0 { compatible = "fsl,imx-parallel-display"; #address-cells = <1>; #size-cells = <0>; interface-pix-fmt = "bgr666"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_j15>; status = "okay"; port@0 { reg = <0>; lcd_display_in: endpoint { remote-endpoint = <&ipu1_di0_disp0>; }; }; port@1 { reg = <1>; lcd_display_out: endpoint { remote-endpoint = <&lcd_panel_in>; }; }; }; panel-lcd { compatible = "okaya,rs800480t-7x0gp"; backlight = <&backlight_lcd>; port { lcd_panel_in: endpoint { remote-endpoint = <&lcd_display_out>; }; }; }; panel-lvds0 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds0>; port { panel_in_lvds0: endpoint { remote-endpoint = <&lvds0_out>; }; }; }; panel-lvds1 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds1>; port { panel_in_lvds1: endpoint { remote-endpoint = <&lvds1_out>; }; }; }; sound { compatible = "fsl,imx6q-nitrogen6_max-sgtl5000", "fsl,imx-audio-sgtl5000"; model = "imx6q-nitrogen6_max-sgtl5000"; ssi-controller = <&ssi1>; audio-codec = <&codec>; audio-routing = "MIC_IN", "Mic Jack", "Mic Jack", "Mic Bias", "Headphone Jack", "HP_OUT"; mux-int-port = <1>; mux-ext-port = <3>; }; }; &audmux { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; status = "okay"; }; &can1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can1>; xceiver-supply = <®_can_xcvr>; status = "okay"; }; &clks { assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>; assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, <&clks IMX6QDL_CLK_PLL3_USB_OTG>; }; &ecspi1 { cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; flash: m25p80@0 { compatible = "microchip,sst25vf016b"; spi-max-frequency = <20000000>; reg = <0>; }; }; &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; txen-skew-ps = <0>; txc-skew-ps = <3000>; rxdv-skew-ps = <0>; rxc-skew-ps = <3000>; rxd0-skew-ps = <0>; rxd1-skew-ps = <0>; rxd2-skew-ps = <0>; rxd3-skew-ps = <0>; txd0-skew-ps = <0>; txd1-skew-ps = <0>; txd2-skew-ps = <0>; txd3-skew-ps = <0>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; status = "okay"; }; &hdmi { ddc-i2c-bus = <&i2c2>; status = "okay"; }; &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sgtl5000>; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; }; rtc: rtc@68 { compatible = "st,rv4162"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rv4162>; reg = <0x68>; interrupts-extended = <&gpio4 6 IRQ_TYPE_LEVEL_LOW>; }; }; &i2c2 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; }; &i2c3 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; touchscreen@04 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; touchscreen@38 { compatible = "edt,edt-ft5x06"; reg = <0x38>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; }; }; &iomuxc { imx6q-nitrogen6-max { pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 >; }; pinctrl_can1: can1grp { fsl,pins = < MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 >; }; pinctrl_can_xcvr: can-xcvrgrp { fsl,pins = < /* Flexcan XCVR enable */ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 >; }; pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 >; }; pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 /* Phy reset */ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x0f0b0 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 >; }; pinctrl_gpio_keys: gpio-keysgrp { fsl,pins = < /* Power Button */ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 /* Menu Button */ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 /* Home Button */ MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 /* Back Button */ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 /* Volume Up Button */ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 /* Volume Down Button */ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b0 >; }; pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 >; }; pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 >; }; pinctrl_i2c2mux: i2c2muxgrp { fsl,pins = < /* ov5642 camera i2c enable */ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x000b0 /* ov5640_mipi camera i2c enable */ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0 >; }; pinctrl_i2c3: i2c3grp { fsl,pins = < MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 >; }; pinctrl_i2c3mux: i2c3muxgrp { fsl,pins = < /* PCIe I2C enable */ MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x000b0 >; }; pinctrl_j15: j15grp { fsl,pins = < MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 >; }; pinctrl_pcie: pciegrp { fsl,pins = < /* PCIe reset */ MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x000b0 >; }; pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 >; }; pinctrl_pwm2: pwm2grp { fsl,pins = < MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 >; }; pinctrl_pwm3: pwm3grp { fsl,pins = < MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 >; }; pinctrl_pwm4: pwm4grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 >; }; pinctrl_rv4162: rv4162grp { fsl,pins = < MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 >; }; pinctrl_sgtl5000: sgtl5000grp { fsl,pins = < MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 >; }; pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 >; }; pinctrl_uart2: uart2grp { fsl,pins = < MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 >; }; pinctrl_uart5: uart5grp { fsl,pins = < MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x130b1 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x030b1 /* RS485 RX Enable: pull up */ MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b1 /* RS485 DEN: pull down */ MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b1 /* RS485/!RS232 Select: pull down (rs232) */ MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x030b1 /* ON: pull down */ MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x030b1 >; }; pinctrl_usbh1: usbh1grp { fsl,pins = < MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x0b0b0 >; }; pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 /* power enable, high active */ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 >; }; pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 >; }; pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x100b0 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 >; }; pinctrl_usdhc4: usdhc4grp { fsl,pins = < MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 >; }; pinctrl_wlan_vmmc: wlan-vmmcgrp { fsl,pins = < MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0 MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x000b0 MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 >; }; }; }; &ipu1_di0_disp0 { remote-endpoint = <&lcd_display_in>; }; &ldb { status = "okay"; lvds-channel@0 { status = "okay"; port@4 { reg = <4>; lvds0_out: endpoint { remote-endpoint = <&panel_in_lvds0>; }; }; }; lvds-channel@1 { status = "okay"; port@4 { reg = <4>; lvds1_out: endpoint { remote-endpoint = <&panel_in_lvds1>; }; }; }; }; &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>; status = "okay"; }; &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; }; &pwm2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; status = "okay"; }; &pwm3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; }; &pwm4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; }; &ssi1 { status = "okay"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; status = "okay"; }; &uart5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5>; status = "okay"; }; &usbh1 { vbus-supply = <®_usb_h1_vbus>; status = "okay"; }; &usbotg { vbus-supply = <®_usb_otg_vbus>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; status = "okay"; }; &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; non-removable; vmmc-supply = <®_wlan_vmmc>; cap-power-off-card; keep-power-in-suspend; status = "okay"; #address-cells = <1>; #size-cells = <0>; wlcore: wlcore@2 { compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio6>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; ref-clock-frequency = <38400000>; }; }; &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; bus-width = <4>; vmmc-supply = <®_3p3v>; status = "okay"; }; &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; bus-width = <8>; non-removable; vmmc-supply = <®_1p8v>; keep-power-in-suspend; status = "okay"; }; |