Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 | /* * Driver for the Epson RTC module RX-6110 SA * * Copyright(C) 2015 Pengutronix, Steffen Trumtrar <kernel@pengutronix.de> * Copyright(C) SEIKO EPSON CORPORATION 2013. All rights reserved. * * This driver software is distributed as is, without any warranty of any kind, * either express or implied as further specified in the GNU Public License. * This software may be used and distributed according to the terms of the GNU * Public License, version 2 as published by the Free Software Foundation. * See the file COPYING in the main directory of this archive for more details. * * You should have received a copy of the GNU General Public License along with * this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/bcd.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of_gpio.h> #include <linux/regmap.h> #include <linux/rtc.h> #include <linux/spi/spi.h> /* RX-6110 Register definitions */ #define RX6110_REG_SEC 0x10 #define RX6110_REG_MIN 0x11 #define RX6110_REG_HOUR 0x12 #define RX6110_REG_WDAY 0x13 #define RX6110_REG_MDAY 0x14 #define RX6110_REG_MONTH 0x15 #define RX6110_REG_YEAR 0x16 #define RX6110_REG_RES1 0x17 #define RX6110_REG_ALMIN 0x18 #define RX6110_REG_ALHOUR 0x19 #define RX6110_REG_ALWDAY 0x1A #define RX6110_REG_TCOUNT0 0x1B #define RX6110_REG_TCOUNT1 0x1C #define RX6110_REG_EXT 0x1D #define RX6110_REG_FLAG 0x1E #define RX6110_REG_CTRL 0x1F #define RX6110_REG_USER0 0x20 #define RX6110_REG_USER1 0x21 #define RX6110_REG_USER2 0x22 #define RX6110_REG_USER3 0x23 #define RX6110_REG_USER4 0x24 #define RX6110_REG_USER5 0x25 #define RX6110_REG_USER6 0x26 #define RX6110_REG_USER7 0x27 #define RX6110_REG_USER8 0x28 #define RX6110_REG_USER9 0x29 #define RX6110_REG_USERA 0x2A #define RX6110_REG_USERB 0x2B #define RX6110_REG_USERC 0x2C #define RX6110_REG_USERD 0x2D #define RX6110_REG_USERE 0x2E #define RX6110_REG_USERF 0x2F #define RX6110_REG_RES2 0x30 #define RX6110_REG_RES3 0x31 #define RX6110_REG_IRQ 0x32 #define RX6110_BIT_ALARM_EN BIT(7) /* Extension Register (1Dh) bit positions */ #define RX6110_BIT_EXT_TSEL0 BIT(0) #define RX6110_BIT_EXT_TSEL1 BIT(1) #define RX6110_BIT_EXT_TSEL2 BIT(2) #define RX6110_BIT_EXT_WADA BIT(3) #define RX6110_BIT_EXT_TE BIT(4) #define RX6110_BIT_EXT_USEL BIT(5) #define RX6110_BIT_EXT_FSEL0 BIT(6) #define RX6110_BIT_EXT_FSEL1 BIT(7) /* Flag Register (1Eh) bit positions */ #define RX6110_BIT_FLAG_VLF BIT(1) #define RX6110_BIT_FLAG_AF BIT(3) #define RX6110_BIT_FLAG_TF BIT(4) #define RX6110_BIT_FLAG_UF BIT(5) /* Control Register (1Fh) bit positions */ #define RX6110_BIT_CTRL_TBKE BIT(0) #define RX6110_BIT_CTRL_TBKON BIT(1) #define RX6110_BIT_CTRL_TSTP BIT(2) #define RX6110_BIT_CTRL_AIE BIT(3) #define RX6110_BIT_CTRL_TIE BIT(4) #define RX6110_BIT_CTRL_UIE BIT(5) #define RX6110_BIT_CTRL_STOP BIT(6) #define RX6110_BIT_CTRL_TEST BIT(7) enum { RTC_SEC = 0, RTC_MIN, RTC_HOUR, RTC_WDAY, RTC_MDAY, RTC_MONTH, RTC_YEAR, RTC_NR_TIME }; #define RX6110_DRIVER_NAME "rx6110" struct rx6110_data { struct rtc_device *rtc; struct regmap *regmap; }; /** * rx6110_rtc_tm_to_data - convert rtc_time to native time encoding * * @tm: holds date and time * @data: holds the encoding in rx6110 native form */ static int rx6110_rtc_tm_to_data(struct rtc_time *tm, u8 *data) { pr_debug("%s: date %ds %dm %dh %dmd %dm %dy\n", __func__, tm->tm_sec, tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year); /* * The year in the RTC is a value between 0 and 99. * Assume that this represents the current century * and disregard all other values. */ if (tm->tm_year < 100 || tm->tm_year >= 200) return -EINVAL; data[RTC_SEC] = bin2bcd(tm->tm_sec); data[RTC_MIN] = bin2bcd(tm->tm_min); data[RTC_HOUR] = bin2bcd(tm->tm_hour); data[RTC_WDAY] = BIT(bin2bcd(tm->tm_wday)); data[RTC_MDAY] = bin2bcd(tm->tm_mday); data[RTC_MONTH] = bin2bcd(tm->tm_mon + 1); data[RTC_YEAR] = bin2bcd(tm->tm_year % 100); return 0; } /** * rx6110_data_to_rtc_tm - convert native time encoding to rtc_time * * @data: holds the encoding in rx6110 native form * @tm: holds date and time */ static int rx6110_data_to_rtc_tm(u8 *data, struct rtc_time *tm) { tm->tm_sec = bcd2bin(data[RTC_SEC] & 0x7f); tm->tm_min = bcd2bin(data[RTC_MIN] & 0x7f); /* only 24-hour clock */ tm->tm_hour = bcd2bin(data[RTC_HOUR] & 0x3f); tm->tm_wday = ffs(data[RTC_WDAY] & 0x7f); tm->tm_mday = bcd2bin(data[RTC_MDAY] & 0x3f); tm->tm_mon = bcd2bin(data[RTC_MONTH] & 0x1f) - 1; tm->tm_year = bcd2bin(data[RTC_YEAR]) + 100; pr_debug("%s: date %ds %dm %dh %dmd %dm %dy\n", __func__, tm->tm_sec, tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year); /* * The year in the RTC is a value between 0 and 99. * Assume that this represents the current century * and disregard all other values. */ if (tm->tm_year < 100 || tm->tm_year >= 200) return -EINVAL; return 0; } /** * rx6110_set_time - set the current time in the rx6110 registers * * @dev: the rtc device in use * @tm: holds date and time * * BUG: The HW assumes every year that is a multiple of 4 to be a leap * year. Next time this is wrong is 2100, which will not be a leap year * * Note: If STOP is not set/cleared, the clock will start when the seconds * register is written * */ static int rx6110_set_time(struct device *dev, struct rtc_time *tm) { struct rx6110_data *rx6110 = dev_get_drvdata(dev); u8 data[RTC_NR_TIME]; int ret; ret = rx6110_rtc_tm_to_data(tm, data); if (ret < 0) return ret; /* set STOP bit before changing clock/calendar */ ret = regmap_update_bits(rx6110->regmap, RX6110_REG_CTRL, RX6110_BIT_CTRL_STOP, RX6110_BIT_CTRL_STOP); if (ret) return ret; ret = regmap_bulk_write(rx6110->regmap, RX6110_REG_SEC, data, RTC_NR_TIME); if (ret) return ret; /* The time in the RTC is valid. Be sure to have VLF cleared. */ ret = regmap_update_bits(rx6110->regmap, RX6110_REG_FLAG, RX6110_BIT_FLAG_VLF, 0); if (ret) return ret; /* clear STOP bit after changing clock/calendar */ ret = regmap_update_bits(rx6110->regmap, RX6110_REG_CTRL, RX6110_BIT_CTRL_STOP, 0); return ret; } /** * rx6110_get_time - get the current time from the rx6110 registers * @dev: the rtc device in use * @tm: holds date and time */ static int rx6110_get_time(struct device *dev, struct rtc_time *tm) { struct rx6110_data *rx6110 = dev_get_drvdata(dev); u8 data[RTC_NR_TIME]; int flags; int ret; ret = regmap_read(rx6110->regmap, RX6110_REG_FLAG, &flags); if (ret) return -EINVAL; /* check for VLF Flag (set at power-on) */ if ((flags & RX6110_BIT_FLAG_VLF)) { dev_warn(dev, "Voltage low, data is invalid.\n"); return -EINVAL; } /* read registers to date */ ret = regmap_bulk_read(rx6110->regmap, RX6110_REG_SEC, data, RTC_NR_TIME); if (ret) return ret; ret = rx6110_data_to_rtc_tm(data, tm); if (ret) return ret; dev_dbg(dev, "%s: date %ds %dm %dh %dmd %dm %dy\n", __func__, tm->tm_sec, tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year); return rtc_valid_tm(tm); } static const struct reg_sequence rx6110_default_regs[] = { { RX6110_REG_RES1, 0xB8 }, { RX6110_REG_RES2, 0x00 }, { RX6110_REG_RES3, 0x10 }, { RX6110_REG_IRQ, 0x00 }, { RX6110_REG_ALMIN, 0x00 }, { RX6110_REG_ALHOUR, 0x00 }, { RX6110_REG_ALWDAY, 0x00 }, }; /** * rx6110_init - initialize the rx6110 registers * * @rx6110: pointer to the rx6110 struct in use * */ static int rx6110_init(struct rx6110_data *rx6110) { struct rtc_device *rtc = rx6110->rtc; int flags; int ret; ret = regmap_update_bits(rx6110->regmap, RX6110_REG_EXT, RX6110_BIT_EXT_TE, 0); if (ret) return ret; ret = regmap_register_patch(rx6110->regmap, rx6110_default_regs, ARRAY_SIZE(rx6110_default_regs)); if (ret) return ret; ret = regmap_read(rx6110->regmap, RX6110_REG_FLAG, &flags); if (ret) return ret; /* check for VLF Flag (set at power-on) */ if ((flags & RX6110_BIT_FLAG_VLF)) dev_warn(&rtc->dev, "Voltage low, data loss detected.\n"); /* check for Alarm Flag */ if (flags & RX6110_BIT_FLAG_AF) dev_warn(&rtc->dev, "An alarm may have been missed.\n"); /* check for Periodic Timer Flag */ if (flags & RX6110_BIT_FLAG_TF) dev_warn(&rtc->dev, "Periodic timer was detected\n"); /* check for Update Timer Flag */ if (flags & RX6110_BIT_FLAG_UF) dev_warn(&rtc->dev, "Update timer was detected\n"); /* clear all flags BUT VLF */ ret = regmap_update_bits(rx6110->regmap, RX6110_REG_FLAG, RX6110_BIT_FLAG_AF | RX6110_BIT_FLAG_UF | RX6110_BIT_FLAG_TF, 0); return ret; } static const struct rtc_class_ops rx6110_rtc_ops = { .read_time = rx6110_get_time, .set_time = rx6110_set_time, }; static struct regmap_config regmap_spi_config = { .reg_bits = 8, .val_bits = 8, .max_register = RX6110_REG_IRQ, .read_flag_mask = 0x80, }; /** * rx6110_probe - initialize rtc driver * @spi: pointer to spi device */ static int rx6110_probe(struct spi_device *spi) { struct rx6110_data *rx6110; int err; if ((spi->bits_per_word && spi->bits_per_word != 8) || (spi->max_speed_hz > 2000000) || (spi->mode != (SPI_CS_HIGH | SPI_CPOL | SPI_CPHA))) { dev_warn(&spi->dev, "SPI settings: bits_per_word: %d, max_speed_hz: %d, mode: %xh\n", spi->bits_per_word, spi->max_speed_hz, spi->mode); dev_warn(&spi->dev, "driving device in an unsupported mode"); } rx6110 = devm_kzalloc(&spi->dev, sizeof(*rx6110), GFP_KERNEL); if (!rx6110) return -ENOMEM; rx6110->regmap = devm_regmap_init_spi(spi, ®map_spi_config); if (IS_ERR(rx6110->regmap)) { dev_err(&spi->dev, "regmap init failed for rtc rx6110\n"); return PTR_ERR(rx6110->regmap); } spi_set_drvdata(spi, rx6110); rx6110->rtc = devm_rtc_device_register(&spi->dev, RX6110_DRIVER_NAME, &rx6110_rtc_ops, THIS_MODULE); if (IS_ERR(rx6110->rtc)) return PTR_ERR(rx6110->rtc); err = rx6110_init(rx6110); if (err) return err; rx6110->rtc->max_user_freq = 1; return 0; } static int rx6110_remove(struct spi_device *spi) { return 0; } static const struct spi_device_id rx6110_id[] = { { "rx6110", 0 }, { } }; MODULE_DEVICE_TABLE(spi, rx6110_id); static struct spi_driver rx6110_driver = { .driver = { .name = RX6110_DRIVER_NAME, }, .probe = rx6110_probe, .remove = rx6110_remove, .id_table = rx6110_id, }; module_spi_driver(rx6110_driver); MODULE_AUTHOR("Val Krutov <val.krutov@erd.epson.com>"); MODULE_DESCRIPTION("RX-6110 SA RTC driver"); MODULE_LICENSE("GPL"); |