Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 | /* L2CR functions Copyright © 1997-1998 by PowerLogix R & D, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* Thur, Dec. 12, 1998. - First public release, contributed by PowerLogix. *********** Sat, Aug. 7, 1999. - Terry: Made sure code disabled interrupts before running. (Previously it was assumed interrupts were already disabled). - Terry: Updated for tentative G4 support. 4MB of memory is now flushed instead of 2MB. (Prob. only 3 is necessary). - Terry: Updated for workaround to HID0[DPM] processor bug during global invalidates. *********** Thu, July 13, 2000. - Terry: Added isync to correct for an errata. 22 August 2001. - DanM: Finally added the 7450 patch I've had for the past several months. The L2CR is similar, but I'm going to assume the user of this functions knows what they are doing. Author: Terry Greeniaus (tgree@phys.ualberta.ca) Please e-mail updates to this file to me, thanks! */ #include <asm/processor.h> #include <asm/cputable.h> #include <asm/ppc_asm.h> #include <asm/cache.h> #include <asm/page.h> /* Usage: When setting the L2CR register, you must do a few special things. If you are enabling the cache, you must perform a global invalidate. If you are disabling the cache, you must flush the cache contents first. This routine takes care of doing these things. When first enabling the cache, make sure you pass in the L2CR you want, as well as passing in the global invalidate bit set. A global invalidate will only be performed if the L2I bit is set in applyThis. When enabling the cache, you should also set the L2E bit in applyThis. If you want to modify the L2CR contents after the cache has been enabled, the recommended procedure is to first call __setL2CR(0) to disable the cache and then call it again with the new values for L2CR. Examples: _setL2CR(0) - disables the cache _setL2CR(0xB3A04000) - enables my G3 upgrade card: - L2E set to turn on the cache - L2SIZ set to 1MB - L2CLK set to 1:1 - L2RAM set to pipelined synchronous late-write - L2I set to perform a global invalidation - L2OH set to 0.5 nS - L2DF set because this upgrade card requires it A similar call should work for your card. You need to know the correct setting for your card and then place them in the fields I have outlined above. Other fields support optional features, such as L2DO which caches only data, or L2TS which causes cache pushes from the L1 cache to go to the L2 cache instead of to main memory. IMPORTANT: Starting with the 7450, the bits in this register have moved or behave differently. The Enable, Parity Enable, Size, and L2 Invalidate are the only bits that have not moved. The size is read-only for these processors with internal L2 cache, and the invalidate is a control as well as status. -- Dan */ /* * Summary: this procedure ignores the L2I bit in the value passed in, * flushes the cache if it was already enabled, always invalidates the * cache, then enables the cache if the L2E bit is set in the value * passed in. * -- paulus. */ _GLOBAL(_set_L2CR) /* Make sure this is a 750 or 7400 chip */ BEGIN_FTR_SECTION li r3,-1 blr END_FTR_SECTION_IFCLR(CPU_FTR_L2CR) mflr r9 /* Stop DST streams */ BEGIN_FTR_SECTION DSSALL sync END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) /* Turn off interrupts and data relocation. */ mfmsr r7 /* Save MSR in r7 */ rlwinm r4,r7,0,17,15 rlwinm r4,r4,0,28,26 /* Turn off DR bit */ sync mtmsr r4 isync /* Before we perform the global invalidation, we must disable dynamic * power management via HID0[DPM] to work around a processor bug where * DPM can possibly interfere with the state machine in the processor * that invalidates the L2 cache tags. */ mfspr r8,SPRN_HID0 /* Save HID0 in r8 */ rlwinm r4,r8,0,12,10 /* Turn off HID0[DPM] */ sync mtspr SPRN_HID0,r4 /* Disable DPM */ sync /* Get the current enable bit of the L2CR into r4 */ mfspr r4,SPRN_L2CR /* Tweak some bits */ rlwinm r5,r3,0,0,0 /* r5 contains the new enable bit */ rlwinm r3,r3,0,11,9 /* Turn off the invalidate bit */ rlwinm r3,r3,0,1,31 /* Turn off the enable bit */ /* Check to see if we need to flush */ rlwinm. r4,r4,0,0,0 beq 2f /* Flush the cache. First, read the first 4MB of memory (physical) to * put new data in the cache. (Actually we only need * the size of the L2 cache plus the size of the L1 cache, but 4MB will * cover everything just to be safe). */ /**** Might be a good idea to set L2DO here - to prevent instructions from getting into the cache. But since we invalidate the next time we enable the cache it doesn't really matter. Don't do this unless you accommodate all processor variations. The bit moved on the 7450..... ****/ BEGIN_FTR_SECTION /* Disable L2 prefetch on some 745x and try to ensure * L2 prefetch engines are idle. As explained by errata * text, we can't be sure they are, we just hope very hard * that well be enough (sic !). At least I noticed Apple * doesn't even bother doing the dcbf's here... */ mfspr r4,SPRN_MSSCR0 rlwinm r4,r4,0,0,29 sync mtspr SPRN_MSSCR0,r4 sync isync lis r4,KERNELBASE@h dcbf 0,r4 dcbf 0,r4 dcbf 0,r4 dcbf 0,r4 END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450) /* TODO: use HW flush assist when available */ lis r4,0x0002 mtctr r4 li r4,0 1: lwzx r0,r0,r4 addi r4,r4,32 /* Go to start of next cache line */ bdnz 1b isync /* Now, flush the first 4MB of memory */ lis r4,0x0002 mtctr r4 li r4,0 sync 1: dcbf 0,r4 addi r4,r4,32 /* Go to start of next cache line */ bdnz 1b 2: /* Set up the L2CR configuration bits (and switch L2 off) */ /* CPU errata: Make sure the mtspr below is already in the * L1 icache */ b 20f .balign L1_CACHE_BYTES 22: sync mtspr SPRN_L2CR,r3 sync b 23f 20: b 21f 21: sync isync b 22b 23: /* Perform a global invalidation */ oris r3,r3,0x0020 sync mtspr SPRN_L2CR,r3 sync isync /* For errata */ BEGIN_FTR_SECTION /* On the 7450, we wait for the L2I bit to clear...... */ 10: mfspr r3,SPRN_L2CR andis. r4,r3,0x0020 bne 10b b 11f END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450) /* Wait for the invalidation to complete */ 3: mfspr r3,SPRN_L2CR rlwinm. r4,r3,0,31,31 bne 3b 11: rlwinm r3,r3,0,11,9 /* Turn off the L2I bit */ sync mtspr SPRN_L2CR,r3 sync /* See if we need to enable the cache */ cmplwi r5,0 beq 4f /* Enable the cache */ oris r3,r3,0x8000 mtspr SPRN_L2CR,r3 sync /* Enable L2 HW prefetch on 744x/745x */ BEGIN_FTR_SECTION mfspr r3,SPRN_MSSCR0 ori r3,r3,3 sync mtspr SPRN_MSSCR0,r3 sync isync END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450) 4: /* Restore HID0[DPM] to whatever it was before */ sync mtspr 1008,r8 sync /* Restore MSR (restores EE and DR bits to original state) */ SYNC mtmsr r7 isync mtlr r9 blr _GLOBAL(_get_L2CR) /* Return the L2CR contents */ li r3,0 BEGIN_FTR_SECTION mfspr r3,SPRN_L2CR END_FTR_SECTION_IFSET(CPU_FTR_L2CR) blr /* * Here is a similar routine for dealing with the L3 cache * on the 745x family of chips */ _GLOBAL(_set_L3CR) /* Make sure this is a 745x chip */ BEGIN_FTR_SECTION li r3,-1 blr END_FTR_SECTION_IFCLR(CPU_FTR_L3CR) /* Turn off interrupts and data relocation. */ mfmsr r7 /* Save MSR in r7 */ rlwinm r4,r7,0,17,15 rlwinm r4,r4,0,28,26 /* Turn off DR bit */ sync mtmsr r4 isync /* Stop DST streams */ DSSALL sync /* Get the current enable bit of the L3CR into r4 */ mfspr r4,SPRN_L3CR /* Tweak some bits */ rlwinm r5,r3,0,0,0 /* r5 contains the new enable bit */ rlwinm r3,r3,0,22,20 /* Turn off the invalidate bit */ rlwinm r3,r3,0,2,31 /* Turn off the enable & PE bits */ rlwinm r3,r3,0,5,3 /* Turn off the clken bit */ /* Check to see if we need to flush */ rlwinm. r4,r4,0,0,0 beq 2f /* Flush the cache. */ /* TODO: use HW flush assist */ lis r4,0x0008 mtctr r4 li r4,0 1: lwzx r0,r0,r4 dcbf 0,r4 addi r4,r4,32 /* Go to start of next cache line */ bdnz 1b 2: /* Set up the L3CR configuration bits (and switch L3 off) */ sync mtspr SPRN_L3CR,r3 sync oris r3,r3,L3CR_L3RES@h /* Set reserved bit 5 */ mtspr SPRN_L3CR,r3 sync oris r3,r3,L3CR_L3CLKEN@h /* Set clken */ mtspr SPRN_L3CR,r3 sync /* Wait for stabilize */ li r0,256 mtctr r0 1: bdnz 1b /* Perform a global invalidation */ ori r3,r3,0x0400 sync mtspr SPRN_L3CR,r3 sync isync /* We wait for the L3I bit to clear...... */ 10: mfspr r3,SPRN_L3CR andi. r4,r3,0x0400 bne 10b /* Clear CLKEN */ rlwinm r3,r3,0,5,3 /* Turn off the clken bit */ mtspr SPRN_L3CR,r3 sync /* Wait for stabilize */ li r0,256 mtctr r0 1: bdnz 1b /* See if we need to enable the cache */ cmplwi r5,0 beq 4f /* Enable the cache */ oris r3,r3,(L3CR_L3E | L3CR_L3CLKEN)@h mtspr SPRN_L3CR,r3 sync /* Wait for stabilize */ li r0,256 mtctr r0 1: bdnz 1b /* Restore MSR (restores EE and DR bits to original state) */ 4: SYNC mtmsr r7 isync blr _GLOBAL(_get_L3CR) /* Return the L3CR contents */ li r3,0 BEGIN_FTR_SECTION mfspr r3,SPRN_L3CR END_FTR_SECTION_IFSET(CPU_FTR_L3CR) blr /* --- End of PowerLogix code --- */ /* flush_disable_L1() - Flush and disable L1 cache * * clobbers r0, r3, ctr, cr0 * Must be called with interrupts disabled and MMU enabled. */ _GLOBAL(__flush_disable_L1) /* Stop pending alitvec streams and memory accesses */ BEGIN_FTR_SECTION DSSALL END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) sync /* Load counter to 0x4000 cache lines (512k) and * load cache with datas */ li r3,0x4000 /* 512kB / 32B */ mtctr r3 lis r3,KERNELBASE@h 1: lwz r0,0(r3) addi r3,r3,0x0020 /* Go to start of next cache line */ bdnz 1b isync sync /* Now flush those cache lines */ li r3,0x4000 /* 512kB / 32B */ mtctr r3 lis r3,KERNELBASE@h 1: dcbf 0,r3 addi r3,r3,0x0020 /* Go to start of next cache line */ bdnz 1b sync /* We can now disable the L1 cache (HID0:DCE, HID0:ICE) */ mfspr r3,SPRN_HID0 rlwinm r3,r3,0,18,15 mtspr SPRN_HID0,r3 sync isync blr /* inval_enable_L1 - Invalidate and enable L1 cache * * Assumes L1 is already disabled and MSR:EE is off * * clobbers r3 */ _GLOBAL(__inval_enable_L1) /* Enable and then Flash inval the instruction & data cache */ mfspr r3,SPRN_HID0 ori r3,r3, HID0_ICE|HID0_ICFI|HID0_DCE|HID0_DCI sync isync mtspr SPRN_HID0,r3 xori r3,r3, HID0_ICFI|HID0_DCI mtspr SPRN_HID0,r3 sync blr |