Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 | /* * sja1000.h - Philips SJA1000 network device driver * * Copyright (c) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33, * 38106 Braunschweig, GERMANY * * Copyright (c) 2002-2007 Volkswagen Group Electronic Research * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of Volkswagen nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * Alternatively, provided that this notice is retained in full, this * software may be distributed under the terms of the GNU General * Public License ("GPL") version 2, in which case the provisions of the * GPL apply INSTEAD OF those given above. * * The provided data structures and external interfaces from this code * are not restricted to be used by modules with a GPL compatible license. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * DAMAGE. * */ #ifndef SJA1000_DEV_H #define SJA1000_DEV_H #include <linux/irqreturn.h> #include <linux/can/dev.h> #include <linux/can/platform/sja1000.h> #define SJA1000_ECHO_SKB_MAX 1 /* the SJA1000 has one TX buffer object */ #define SJA1000_MAX_IRQ 20 /* max. number of interrupts handled in ISR */ /* SJA1000 registers - manual section 6.4 (Pelican Mode) */ #define REG_MOD 0x00 #define REG_CMR 0x01 #define REG_SR 0x02 #define REG_IR 0x03 #define REG_IER 0x04 #define REG_ALC 0x0B #define REG_ECC 0x0C #define REG_EWL 0x0D #define REG_RXERR 0x0E #define REG_TXERR 0x0F #define REG_ACCC0 0x10 #define REG_ACCC1 0x11 #define REG_ACCC2 0x12 #define REG_ACCC3 0x13 #define REG_ACCM0 0x14 #define REG_ACCM1 0x15 #define REG_ACCM2 0x16 #define REG_ACCM3 0x17 #define REG_RMC 0x1D #define REG_RBSA 0x1E /* Common registers - manual section 6.5 */ #define REG_BTR0 0x06 #define REG_BTR1 0x07 #define REG_OCR 0x08 #define REG_CDR 0x1F #define REG_FI 0x10 #define SFF_BUF 0x13 #define EFF_BUF 0x15 #define FI_FF 0x80 #define FI_RTR 0x40 #define REG_ID1 0x11 #define REG_ID2 0x12 #define REG_ID3 0x13 #define REG_ID4 0x14 #define CAN_RAM 0x20 /* mode register */ #define MOD_RM 0x01 #define MOD_LOM 0x02 #define MOD_STM 0x04 #define MOD_AFM 0x08 #define MOD_SM 0x10 /* commands */ #define CMD_SRR 0x10 #define CMD_CDO 0x08 #define CMD_RRB 0x04 #define CMD_AT 0x02 #define CMD_TR 0x01 /* interrupt sources */ #define IRQ_BEI 0x80 #define IRQ_ALI 0x40 #define IRQ_EPI 0x20 #define IRQ_WUI 0x10 #define IRQ_DOI 0x08 #define IRQ_EI 0x04 #define IRQ_TI 0x02 #define IRQ_RI 0x01 #define IRQ_ALL 0xFF #define IRQ_OFF 0x00 /* status register content */ #define SR_BS 0x80 #define SR_ES 0x40 #define SR_TS 0x20 #define SR_RS 0x10 #define SR_TCS 0x08 #define SR_TBS 0x04 #define SR_DOS 0x02 #define SR_RBS 0x01 #define SR_CRIT (SR_BS|SR_ES) /* ECC register */ #define ECC_SEG 0x1F #define ECC_DIR 0x20 #define ECC_ERR 6 #define ECC_BIT 0x00 #define ECC_FORM 0x40 #define ECC_STUFF 0x80 #define ECC_MASK 0xc0 /* * Flags for sja1000priv.flags */ #define SJA1000_CUSTOM_IRQ_HANDLER 0x1 /* * SJA1000 private data structure */ struct sja1000_priv { struct can_priv can; /* must be the first member */ int open_time; struct sk_buff *echo_skb; /* the lower-layer is responsible for appropriate locking */ u8 (*read_reg) (const struct sja1000_priv *priv, int reg); void (*write_reg) (const struct sja1000_priv *priv, int reg, u8 val); void (*pre_irq) (const struct sja1000_priv *priv); void (*post_irq) (const struct sja1000_priv *priv); void *priv; /* for board-specific data */ struct net_device *dev; void __iomem *reg_base; /* ioremap'ed address to registers */ unsigned long irq_flags; /* for request_irq() */ spinlock_t cmdreg_lock; /* lock for concurrent cmd register writes */ u16 flags; /* custom mode flags */ u8 ocr; /* output control register */ u8 cdr; /* clock divider register */ }; struct net_device *alloc_sja1000dev(int sizeof_priv); void free_sja1000dev(struct net_device *dev); int register_sja1000dev(struct net_device *dev); void unregister_sja1000dev(struct net_device *dev); irqreturn_t sja1000_interrupt(int irq, void *dev_id); #endif /* SJA1000_DEV_H */ |