Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 | /* * arch/arm/mach-orion5x/wrt350n-v2-setup.c * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ #include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/pci.h> #include <linux/irq.h> #include <linux/delay.h> #include <linux/mtd/physmap.h> #include <linux/mv643xx_eth.h> #include <linux/ethtool.h> #include <linux/leds.h> #include <linux/gpio_keys.h> #include <linux/input.h> #include <net/dsa.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> #include "common.h" #include "mpp.h" /* * LEDs attached to GPIO */ static struct gpio_led wrt350n_v2_led_pins[] = { { .name = "wrt350nv2:green:power", .gpio = 0, .active_low = 1, }, { .name = "wrt350nv2:green:security", .gpio = 1, .active_low = 1, }, { .name = "wrt350nv2:orange:power", .gpio = 5, .active_low = 1, }, { .name = "wrt350nv2:green:usb", .gpio = 6, .active_low = 1, }, { .name = "wrt350nv2:green:wireless", .gpio = 7, .active_low = 1, }, }; static struct gpio_led_platform_data wrt350n_v2_led_data = { .leds = wrt350n_v2_led_pins, .num_leds = ARRAY_SIZE(wrt350n_v2_led_pins), }; static struct platform_device wrt350n_v2_leds = { .name = "leds-gpio", .id = -1, .dev = { .platform_data = &wrt350n_v2_led_data, }, }; /* * Buttons attached to GPIO */ static struct gpio_keys_button wrt350n_v2_buttons[] = { { .code = KEY_RESTART, .gpio = 3, .desc = "Reset Button", .active_low = 1, }, { .code = KEY_WPS_BUTTON, .gpio = 2, .desc = "WPS Button", .active_low = 1, }, }; static struct gpio_keys_platform_data wrt350n_v2_button_data = { .buttons = wrt350n_v2_buttons, .nbuttons = ARRAY_SIZE(wrt350n_v2_buttons), }; static struct platform_device wrt350n_v2_button_device = { .name = "gpio-keys", .id = -1, .num_resources = 0, .dev = { .platform_data = &wrt350n_v2_button_data, }, }; /* * General setup */ static unsigned int wrt350n_v2_mpp_modes[] __initdata = { MPP0_GPIO, /* Power LED green (0=on) */ MPP1_GPIO, /* Security LED (0=on) */ MPP2_GPIO, /* Internal Button (0=on) */ MPP3_GPIO, /* Reset Button (0=on) */ MPP4_GPIO, /* PCI int */ MPP5_GPIO, /* Power LED orange (0=on) */ MPP6_GPIO, /* USB LED (0=on) */ MPP7_GPIO, /* Wireless LED (0=on) */ MPP8_UNUSED, /* ??? */ MPP9_GIGE, /* GE_RXERR */ MPP10_UNUSED, /* ??? */ MPP11_UNUSED, /* ??? */ MPP12_GIGE, /* GE_TXD[4] */ MPP13_GIGE, /* GE_TXD[5] */ MPP14_GIGE, /* GE_TXD[6] */ MPP15_GIGE, /* GE_TXD[7] */ MPP16_GIGE, /* GE_RXD[4] */ MPP17_GIGE, /* GE_RXD[5] */ MPP18_GIGE, /* GE_RXD[6] */ MPP19_GIGE, /* GE_RXD[7] */ 0, }; /* * 8M NOR flash Device bus boot chip select */ #define WRT350N_V2_NOR_BOOT_BASE 0xf4000000 #define WRT350N_V2_NOR_BOOT_SIZE SZ_8M static struct mtd_partition wrt350n_v2_nor_flash_partitions[] = { { .name = "kernel", .offset = 0x00000000, .size = 0x00760000, }, { .name = "rootfs", .offset = 0x001a0000, .size = 0x005c0000, }, { .name = "lang", .offset = 0x00760000, .size = 0x00040000, }, { .name = "nvram", .offset = 0x007a0000, .size = 0x00020000, }, { .name = "u-boot", .offset = 0x007c0000, .size = 0x00040000, }, }; static struct physmap_flash_data wrt350n_v2_nor_flash_data = { .width = 1, .parts = wrt350n_v2_nor_flash_partitions, .nr_parts = ARRAY_SIZE(wrt350n_v2_nor_flash_partitions), }; static struct resource wrt350n_v2_nor_flash_resource = { .flags = IORESOURCE_MEM, .start = WRT350N_V2_NOR_BOOT_BASE, .end = WRT350N_V2_NOR_BOOT_BASE + WRT350N_V2_NOR_BOOT_SIZE - 1, }; static struct platform_device wrt350n_v2_nor_flash = { .name = "physmap-flash", .id = 0, .dev = { .platform_data = &wrt350n_v2_nor_flash_data, }, .num_resources = 1, .resource = &wrt350n_v2_nor_flash_resource, }; static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = { .phy_addr = MV643XX_ETH_PHY_NONE, .speed = SPEED_1000, .duplex = DUPLEX_FULL, }; static struct dsa_chip_data wrt350n_v2_switch_chip_data = { .port_names[0] = "lan2", .port_names[1] = "lan1", .port_names[2] = "wan", .port_names[3] = "cpu", .port_names[5] = "lan3", .port_names[7] = "lan4", }; static struct dsa_platform_data wrt350n_v2_switch_plat_data = { .nr_chips = 1, .chip = &wrt350n_v2_switch_chip_data, }; static void __init wrt350n_v2_init(void) { /* * Setup basic Orion functions. Need to be called early. */ orion5x_init(); orion5x_mpp_conf(wrt350n_v2_mpp_modes); /* * Configure peripherals. */ orion5x_ehci0_init(); orion5x_eth_init(&wrt350n_v2_eth_data); orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data, NO_IRQ); orion5x_uart0_init(); orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE, WRT350N_V2_NOR_BOOT_SIZE); platform_device_register(&wrt350n_v2_nor_flash); platform_device_register(&wrt350n_v2_leds); platform_device_register(&wrt350n_v2_button_device); } static int __init wrt350n_v2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; /* * Check for devices with hard-wired IRQs. */ irq = orion5x_pci_map_irq(dev, slot, pin); if (irq != -1) return irq; /* * Mini-PCI slot. */ if (slot == 7) return gpio_to_irq(4); return -1; } static struct hw_pci wrt350n_v2_pci __initdata = { .nr_controllers = 2, .swizzle = pci_std_swizzle, .setup = orion5x_pci_sys_setup, .scan = orion5x_pci_sys_scan_bus, .map_irq = wrt350n_v2_pci_map_irq, }; static int __init wrt350n_v2_pci_init(void) { if (machine_is_wrt350n_v2()) pci_common_init(&wrt350n_v2_pci); return 0; } subsys_initcall(wrt350n_v2_pci_init); MACHINE_START(WRT350N_V2, "Linksys WRT350N v2") /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ .atag_offset = 0x100, .init_machine = wrt350n_v2_init, .map_io = orion5x_map_io, .init_early = orion5x_init_early, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, MACHINE_END |