Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 | /* * Hardware specific macros, defines and structures * * This software may be used and distributed according to the terms * of the GNU General Public License, incorporated herein by reference. * */ #ifndef HARDWARE_H #define HARDWARE_H #include <asm/param.h> /* For HZ */ /* * General hardware parameters common to all ISA adapters */ #define MAX_CARDS 4 /* The maximum number of cards to control or probe for. */ #define SIGNATURE 0x87654321 /* Board reset signature */ #define SIG_OFFSET 0x1004 /* Where to find signature in shared RAM */ #define TRACE_OFFSET 0x1008 /* Trace enable word offset in shared RAM */ #define BUFFER_OFFSET 0x1800 /* Beginning of buffers */ /* I/O Port parameters */ #define IOBASE_MIN 0x180 /* Lowest I/O port address */ #define IOBASE_MAX 0x3C0 /* Highest I/O port address */ #define IOBASE_OFFSET 0x20 /* Inter-board I/O port gap used during probing */ #define FIFORD_OFFSET 0x0 #define FIFOWR_OFFSET 0x400 #define FIFOSTAT_OFFSET 0x1000 #define RESET_OFFSET 0x2800 #define PG0_OFFSET 0x3000 /* Offset from I/O Base for Page 0 register */ #define PG1_OFFSET 0x3400 /* Offset from I/O Base for Page 1 register */ #define PG2_OFFSET 0x3800 /* Offset from I/O Base for Page 2 register */ #define PG3_OFFSET 0x3C00 /* Offset from I/O Base for Page 3 register */ #define FIFO_READ 0 /* FIFO Read register */ #define FIFO_WRITE 1 /* FIFO Write rgister */ #define LO_ADDR_PTR 2 /* Extended RAM Low Addr Pointer */ #define HI_ADDR_PTR 3 /* Extended RAM High Addr Pointer */ #define NOT_USED_1 4 #define FIFO_STATUS 5 /* FIFO Status Register */ #define NOT_USED_2 6 #define MEM_OFFSET 7 #define SFT_RESET 10 /* Reset Register */ #define EXP_BASE 11 /* Shared RAM Base address */ #define EXP_PAGE0 12 /* Shared RAM Page0 register */ #define EXP_PAGE1 13 /* Shared RAM Page1 register */ #define EXP_PAGE2 14 /* Shared RAM Page2 register */ #define EXP_PAGE3 15 /* Shared RAM Page3 register */ #define IRQ_SELECT 16 /* IRQ selection register */ #define MAX_IO_REGS 17 /* Total number of I/O ports */ /* FIFO register values */ #define RF_HAS_DATA 0x01 /* fifo has data */ #define RF_QUART_FULL 0x02 /* fifo quarter full */ #define RF_HALF_FULL 0x04 /* fifo half full */ #define RF_NOT_FULL 0x08 /* fifo not full */ #define WF_HAS_DATA 0x10 /* fifo has data */ #define WF_QUART_FULL 0x20 /* fifo quarter full */ #define WF_HALF_FULL 0x40 /* fifo half full */ #define WF_NOT_FULL 0x80 /* fifo not full */ /* Shared RAM parameters */ #define SRAM_MIN 0xC0000 /* Lowest host shared RAM address */ #define SRAM_MAX 0xEFFFF /* Highest host shared RAM address */ #define SRAM_PAGESIZE 0x4000 /* Size of one RAM page (16K) */ /* Shared RAM buffer parameters */ #define BUFFER_SIZE 0x800 /* The size of a buffer in bytes */ #define BUFFER_BASE BUFFER_OFFSET /* Offset from start of shared RAM where buffer start */ #define BUFFERS_MAX 16 /* Maximum number of send/receive buffers per channel */ #define HDLC_PROTO 0x01 /* Frame Format for Layer 2 */ #define BRI_BOARD 0 #define POTS_BOARD 1 #define PRI_BOARD 2 /* * Specific hardware parameters for the DataCommute/BRI */ #define BRI_CHANNELS 2 /* Number of B channels */ #define BRI_BASEPG_VAL 0x98 #define BRI_MAGIC 0x60000 /* Magic Number */ #define BRI_MEMSIZE 0x10000 /* Amount of RAM (64K) */ #define BRI_PARTNO "72-029" #define BRI_FEATURES ISDN_FEATURE_L2_HDLC | ISDN_FEATURE_L3_TRANS; /* * Specific hardware parameters for the DataCommute/PRI */ #define PRI_CHANNELS 23 /* Number of B channels */ #define PRI_BASEPG_VAL 0x88 #define PRI_MAGIC 0x20000 /* Magic Number */ #define PRI_MEMSIZE 0x100000 /* Amount of RAM (1M) */ #define PRI_PARTNO "72-030" #define PRI_FEATURES ISDN_FEATURE_L2_HDLC | ISDN_FEATURE_L3_TRANS; /* * Some handy macros */ /* Determine if a channel number is valid for the adapter */ #define IS_VALID_CHANNEL(y, x) ((x > 0) && (x <= sc_adapter[y]->channels)) #endif |