Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834 1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871 1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892 1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 2032 2033 2034 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046 2047 2048 2049 2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063 2064 2065 2066 2067 2068 2069 2070 2071 2072 2073 2074 2075 2076 2077 2078 2079 2080 2081 2082 2083 2084 2085 2086 2087 2088 2089 2090 2091 2092 2093 2094 2095 2096 2097 2098 2099 2100 2101 2102 2103 2104 2105 2106 2107 2108 2109 2110 2111 2112 2113 2114 2115 2116 2117 2118 2119 2120 2121 2122 2123 2124 2125 2126 2127 2128 2129 2130 2131 2132 2133 2134 2135 2136 2137 2138 2139 2140 2141 2142 2143 2144 2145 2146 2147 2148 2149 2150 2151 2152 2153 2154 2155 2156 2157 2158 2159 2160 2161 2162 2163 2164 2165 2166 2167 2168 2169 2170 2171 2172 2173 2174 2175 2176 2177 2178 2179 2180 2181 2182 2183 2184 2185 2186 2187 2188 2189 2190 2191 2192 2193 2194 2195 2196 2197 2198 2199 2200 2201 2202 2203 2204 2205 2206 2207 2208 2209 2210 2211 2212 2213 2214 2215 2216 2217 2218 2219 2220 2221 2222 2223 2224 2225 2226 2227 2228 2229 2230 2231 2232 2233 2234 2235 2236 2237 2238 2239 2240 2241 2242 2243 2244 2245 2246 2247 2248 2249 2250 2251 2252 2253 2254 2255 2256 2257 2258 2259 2260 2261 2262 2263 2264 2265 2266 2267 2268 2269 2270 2271 2272 2273 2274 2275 2276 2277 2278 2279 2280 2281 2282 2283 2284 2285 2286 2287 2288 2289 2290 2291 2292 2293 2294 2295 2296 2297 2298 2299 2300 2301 2302 2303 2304 2305 2306 2307 2308 2309 2310 2311 2312 2313 2314 2315 2316 2317 2318 2319 2320 2321 2322 2323 2324 2325 2326 2327 2328 2329 2330 2331 2332 2333 2334 2335 2336 2337 2338 2339 2340 2341 2342 2343 2344 2345 2346 2347 2348 2349 2350 2351 2352 2353 2354 2355 2356 2357 2358 2359 2360 2361 2362 2363 2364 2365 2366 2367 2368 2369 2370 2371 2372 2373 2374 2375 2376 2377 2378 2379 2380 2381 2382 2383 2384 2385 2386 2387 2388 2389 2390 2391 2392 2393 2394 2395 2396 2397 2398 2399 2400 2401 2402 2403 2404 2405 2406 2407 2408 2409 2410 2411 2412 2413 2414 2415 2416 2417 2418 2419 2420 2421 2422 2423 2424 2425 2426 2427 2428 2429 2430 2431 2432 2433 2434 2435 2436 2437 2438 2439 2440 2441 2442 2443 2444 2445 2446 2447 2448 2449 2450 2451 2452 2453 2454 2455 2456 2457 2458 2459 2460 2461 2462 2463 2464 2465 2466 2467 2468 2469 2470 2471 2472 2473 2474 2475 2476 2477 2478 2479 2480 2481 2482 2483 2484 2485 2486 2487 2488 2489 2490 2491 2492 2493 2494 2495 2496 2497 2498 2499 2500 2501 2502 2503 2504 2505 2506 2507 2508 2509 2510 2511 2512 2513 2514 2515 2516 2517 2518 2519 2520 2521 2522 2523 2524 2525 2526 2527 2528 2529 2530 2531 2532 2533 2534 2535 2536 2537 2538 2539 2540 2541 2542 2543 2544 2545 2546 2547 2548 2549 2550 2551 2552 2553 2554 2555 2556 2557 2558 2559 2560 2561 2562 2563 2564 2565 2566 2567 2568 2569 2570 2571 2572 2573 2574 2575 2576 2577 2578 2579 2580 2581 2582 2583 2584 2585 2586 2587 2588 2589 2590 2591 2592 2593 2594 2595 2596 2597 2598 2599 2600 2601 2602 2603 2604 2605 2606 2607 2608 2609 2610 2611 2612 2613 2614 2615 2616 2617 2618 2619 2620 2621 2622 2623 2624 2625 2626 2627 2628 2629 2630 2631 2632 2633 2634 2635 2636 2637 2638 2639 2640 2641 2642 2643 2644 2645 2646 2647 2648 2649 2650 2651 2652 2653 2654 2655 2656 2657 2658 2659 2660 2661 2662 2663 2664 2665 2666 2667 2668 2669 2670 2671 2672 2673 2674 2675 2676 2677 2678 2679 2680 2681 2682 2683 2684 2685 2686 2687 2688 2689 2690 2691 2692 2693 2694 2695 2696 2697 2698 2699 2700 2701 2702 2703 2704 2705 2706 2707 2708 2709 2710 2711 2712 2713 2714 2715 2716 2717 2718 2719 2720 2721 2722 2723 2724 2725 2726 2727 2728 2729 2730 2731 2732 2733 2734 2735 2736 2737 2738 2739 2740 2741 2742 2743 2744 2745 2746 2747 2748 2749 2750 2751 2752 2753 2754 2755 2756 2757 2758 2759 2760 2761 2762 2763 2764 2765 2766 2767 2768 2769 2770 2771 2772 2773 2774 2775 2776 2777 2778 2779 2780 2781 2782 2783 2784 2785 2786 2787 2788 2789 2790 2791 2792 2793 2794 2795 2796 2797 2798 2799 2800 2801 2802 2803 2804 2805 2806 2807 2808 2809 2810 2811 2812 2813 2814 2815 2816 2817 2818 2819 2820 2821 2822 2823 2824 2825 2826 2827 2828 2829 2830 2831 2832 2833 2834 2835 2836 2837 2838 2839 2840 2841 2842 2843 2844 2845 2846 2847 2848 2849 2850 2851 2852 2853 2854 2855 2856 2857 2858 2859 2860 2861 2862 2863 2864 2865 2866 2867 2868 2869 2870 2871 2872 2873 2874 2875 2876 2877 2878 2879 2880 2881 2882 2883 2884 2885 2886 2887 2888 2889 2890 2891 2892 2893 2894 2895 2896 2897 2898 2899 2900 2901 2902 2903 2904 2905 2906 2907 2908 2909 2910 2911 2912 | /* $Id: cassini.h,v 1.16 2004/08/17 21:15:16 zaumen Exp $ * cassini.h: Definitions for Sun Microsystems Cassini(+) ethernet driver. * * Copyright (C) 2004 Sun Microsystems Inc. * Copyright (c) 2003 Adrian Sun (asun@darksunrising.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see <http://www.gnu.org/licenses/>. * * vendor id: 0x108E (Sun Microsystems, Inc.) * device id: 0xabba (Cassini) * revision ids: 0x01 = Cassini * 0x02 = Cassini rev 2 * 0x10 = Cassini+ * 0x11 = Cassini+ 0.2u * * vendor id: 0x100b (National Semiconductor) * device id: 0x0035 (DP83065/Saturn) * revision ids: 0x30 = Saturn B2 * * rings are all offset from 0. * * there are two clock domains: * PCI: 33/66MHz clock * chip: 125MHz clock */ #ifndef _CASSINI_H #define _CASSINI_H /* cassini register map: 2M memory mapped in 32-bit memory space accessible as * 32-bit words. there is no i/o port access. REG_ addresses are * shared between cassini and cassini+. REG_PLUS_ addresses only * appear in cassini+. REG_MINUS_ addresses only appear in cassini. */ #define CAS_ID_REV2 0x02 #define CAS_ID_REVPLUS 0x10 #define CAS_ID_REVPLUS02u 0x11 #define CAS_ID_REVSATURNB2 0x30 /** global resources **/ /* this register sets the weights for the weighted round robin arbiter. e.g., * if rx weight == 1 and tx weight == 0, rx == 2x tx transfer credit * for its next turn to access the pci bus. * map: 0x0 = x1, 0x1 = x2, 0x2 = x4, 0x3 = x8 * DEFAULT: 0x0, SIZE: 5 bits */ #define REG_CAWR 0x0004 /* core arbitration weight */ #define CAWR_RX_DMA_WEIGHT_SHIFT 0 #define CAWR_RX_DMA_WEIGHT_MASK 0x03 /* [0:1] */ #define CAWR_TX_DMA_WEIGHT_SHIFT 2 #define CAWR_TX_DMA_WEIGHT_MASK 0x0C /* [3:2] */ #define CAWR_RR_DIS 0x10 /* [4] */ /* if enabled, BIM can send bursts across PCI bus > cacheline size. burst * sizes determined by length of packet or descriptor transfer and the * max length allowed by the target. * DEFAULT: 0x0, SIZE: 1 bit */ #define REG_INF_BURST 0x0008 /* infinite burst enable reg */ #define INF_BURST_EN 0x1 /* enable */ /* top level interrupts [0-9] are auto-cleared to 0 when the status * register is read. second level interrupts [13 - 18] are cleared at * the source. tx completion register 3 is replicated in [19 - 31] * DEFAULT: 0x00000000, SIZE: 29 bits */ #define REG_INTR_STATUS 0x000C /* interrupt status register */ #define INTR_TX_INTME 0x00000001 /* frame w/ INT ME desc bit set xferred from host queue to TX FIFO */ #define INTR_TX_ALL 0x00000002 /* all xmit frames xferred into TX FIFO. i.e., TX Kick == TX complete. if PACED_MODE set, then TX FIFO also empty */ #define INTR_TX_DONE 0x00000004 /* any frame xferred into tx FIFO */ #define INTR_TX_TAG_ERROR 0x00000008 /* TX FIFO tag framing corrupted. FATAL ERROR */ #define INTR_RX_DONE 0x00000010 /* at least 1 frame xferred from RX FIFO to host mem. RX completion reg updated. may be delayed by recv intr blanking. */ #define INTR_RX_BUF_UNAVAIL 0x00000020 /* no more receive buffers. RX Kick == RX complete */ #define INTR_RX_TAG_ERROR 0x00000040 /* RX FIFO tag framing corrupted. FATAL ERROR */ #define INTR_RX_COMP_FULL 0x00000080 /* no more room in completion ring to post descriptors. RX complete head incr to almost reach RX complete tail */ #define INTR_RX_BUF_AE 0x00000100 /* less than the programmable threshold # of free descr avail for hw use */ #define INTR_RX_COMP_AF 0x00000200 /* less than the programmable threshold # of descr spaces for hw use in completion descr ring */ #define INTR_RX_LEN_MISMATCH 0x00000400 /* len field from MAC != len of non-reassembly pkt from fifo during DMA or header parser provides TCP header and payload size > MAC packet size. FATAL ERROR */ #define INTR_SUMMARY 0x00001000 /* summary interrupt bit. this bit will be set if an interrupt generated on the pci bus. useful when driver is polling for interrupts */ #define INTR_PCS_STATUS 0x00002000 /* PCS interrupt status register */ #define INTR_TX_MAC_STATUS 0x00004000 /* TX MAC status register has at least 1 unmasked interrupt set */ #define INTR_RX_MAC_STATUS 0x00008000 /* RX MAC status register has at least 1 unmasked interrupt set */ #define INTR_MAC_CTRL_STATUS 0x00010000 /* MAC control status register has at least 1 unmasked interrupt set */ #define INTR_MIF_STATUS 0x00020000 /* MIF status register has at least 1 unmasked interrupt set */ #define INTR_PCI_ERROR_STATUS 0x00040000 /* PCI error status register in the BIF has at least 1 unmasked interrupt set */ #define INTR_TX_COMP_3_MASK 0xFFF80000 /* mask for TX completion 3 reg data */ #define INTR_TX_COMP_3_SHIFT 19 #define INTR_ERROR_MASK (INTR_MIF_STATUS | INTR_PCI_ERROR_STATUS | \ INTR_PCS_STATUS | INTR_RX_LEN_MISMATCH | \ INTR_TX_MAC_STATUS | INTR_RX_MAC_STATUS | \ INTR_TX_TAG_ERROR | INTR_RX_TAG_ERROR | \ INTR_MAC_CTRL_STATUS) /* determines which status events will cause an interrupt. layout same * as REG_INTR_STATUS. * DEFAULT: 0xFFFFFFFF, SIZE: 16 bits */ #define REG_INTR_MASK 0x0010 /* Interrupt mask */ /* top level interrupt bits that are cleared during read of REG_INTR_STATUS_ALIAS. * useful when driver is polling for interrupts. layout same as REG_INTR_MASK. * DEFAULT: 0x00000000, SIZE: 12 bits */ #define REG_ALIAS_CLEAR 0x0014 /* alias clear mask (used w/ status alias) */ /* same as REG_INTR_STATUS except that only bits cleared are those selected by * REG_ALIAS_CLEAR * DEFAULT: 0x00000000, SIZE: 29 bits */ #define REG_INTR_STATUS_ALIAS 0x001C /* interrupt status alias (selective clear) */ /* DEFAULT: 0x0, SIZE: 3 bits */ #define REG_PCI_ERR_STATUS 0x1000 /* PCI error status */ #define PCI_ERR_BADACK 0x01 /* reserved in Cassini+. set if no ACK64# during ABS64 cycle in Cassini. */ #define PCI_ERR_DTRTO 0x02 /* delayed xaction timeout. set if no read retry after 2^15 clocks */ #define PCI_ERR_OTHER 0x04 /* other PCI errors */ #define PCI_ERR_BIM_DMA_WRITE 0x08 /* BIM received 0 count DMA write req. unused in Cassini. */ #define PCI_ERR_BIM_DMA_READ 0x10 /* BIM received 0 count DMA read req. unused in Cassini. */ #define PCI_ERR_BIM_DMA_TIMEOUT 0x20 /* BIM received 255 retries during DMA. unused in cassini. */ /* mask for PCI status events that will set PCI_ERR_STATUS. if cleared, event * causes an interrupt to be generated. * DEFAULT: 0x7, SIZE: 3 bits */ #define REG_PCI_ERR_STATUS_MASK 0x1004 /* PCI Error status mask */ /* used to configure PCI related parameters that are not in PCI config space. * DEFAULT: 0bxx000, SIZE: 5 bits */ #define REG_BIM_CFG 0x1008 /* BIM Configuration */ #define BIM_CFG_RESERVED0 0x001 /* reserved */ #define BIM_CFG_RESERVED1 0x002 /* reserved */ #define BIM_CFG_64BIT_DISABLE 0x004 /* disable 64-bit mode */ #define BIM_CFG_66MHZ 0x008 /* (ro) 1 = 66MHz, 0 = < 66MHz */ #define BIM_CFG_32BIT 0x010 /* (ro) 1 = 32-bit slot, 0 = 64-bit */ #define BIM_CFG_DPAR_INTR_ENABLE 0x020 /* detected parity err enable */ #define BIM_CFG_RMA_INTR_ENABLE 0x040 /* master abort intr enable */ #define BIM_CFG_RTA_INTR_ENABLE 0x080 /* target abort intr enable */ #define BIM_CFG_RESERVED2 0x100 /* reserved */ #define BIM_CFG_BIM_DISABLE 0x200 /* stop BIM DMA. use before global reset. reserved in Cassini. */ #define BIM_CFG_BIM_STATUS 0x400 /* (ro) 1 = BIM DMA suspended. reserved in Cassini. */ #define BIM_CFG_PERROR_BLOCK 0x800 /* block PERR# to pci bus. def: 0. reserved in Cassini. */ /* DEFAULT: 0x00000000, SIZE: 32 bits */ #define REG_BIM_DIAG 0x100C /* BIM Diagnostic */ #define BIM_DIAG_MSTR_SM_MASK 0x3FFFFF00 /* PCI master controller state machine bits [21:0] */ #define BIM_DIAG_BRST_SM_MASK 0x7F /* PCI burst controller state machine bits [6:0] */ /* writing to SW_RESET_TX and SW_RESET_RX will issue a global * reset. poll until TX and RX read back as 0's for completion. */ #define REG_SW_RESET 0x1010 /* Software reset */ #define SW_RESET_TX 0x00000001 /* reset TX DMA engine. poll until cleared to 0. */ #define SW_RESET_RX 0x00000002 /* reset RX DMA engine. poll until cleared to 0. */ #define SW_RESET_RSTOUT 0x00000004 /* force RSTOUT# pin active (low). resets PHY and anything else connected to RSTOUT#. RSTOUT# is also activated by local PCI reset when hot-swap is being done. */ #define SW_RESET_BLOCK_PCS_SLINK 0x00000008 /* if a global reset is done with this bit set, PCS and SLINK modules won't be reset. i.e., link won't drop. */ #define SW_RESET_BREQ_SM_MASK 0x00007F00 /* breq state machine [6:0] */ #define SW_RESET_PCIARB_SM_MASK 0x00070000 /* pci arbitration state bits: 0b000: ARB_IDLE1 0b001: ARB_IDLE2 0b010: ARB_WB_ACK 0b011: ARB_WB_WAT 0b100: ARB_RB_ACK 0b101: ARB_RB_WAT 0b110: ARB_RB_END 0b111: ARB_WB_END */ #define SW_RESET_RDPCI_SM_MASK 0x00300000 /* read pci state bits: 0b00: RD_PCI_WAT 0b01: RD_PCI_RDY 0b11: RD_PCI_ACK */ #define SW_RESET_RDARB_SM_MASK 0x00C00000 /* read arbitration state bits: 0b00: AD_IDL_RX 0b01: AD_ACK_RX 0b10: AD_ACK_TX 0b11: AD_IDL_TX */ #define SW_RESET_WRPCI_SM_MASK 0x06000000 /* write pci state bits 0b00: WR_PCI_WAT 0b01: WR_PCI_RDY 0b11: WR_PCI_ACK */ #define SW_RESET_WRARB_SM_MASK 0x38000000 /* write arbitration state bits: 0b000: ARB_IDLE1 0b001: ARB_IDLE2 0b010: ARB_TX_ACK 0b011: ARB_TX_WAT 0b100: ARB_RX_ACK 0b110: ARB_RX_WAT */ /* Cassini only. 64-bit register used to check PCI datapath. when read, * value written has both lower and upper 32-bit halves rotated to the right * one bit position. e.g., FFFFFFFF FFFFFFFF -> 7FFFFFFF 7FFFFFFF */ #define REG_MINUS_BIM_DATAPATH_TEST 0x1018 /* Cassini: BIM datapath test Cassini+: reserved */ /* output enables are provided for each device's chip select and for the rest * of the outputs from cassini to its local bus devices. two sw programmable * bits are connected to general purpus control/status bits. * DEFAULT: 0x7 */ #define REG_BIM_LOCAL_DEV_EN 0x1020 /* BIM local device output EN. default: 0x7 */ #define BIM_LOCAL_DEV_PAD 0x01 /* address bus, RW signal, and OE signal output enable on the local bus interface. these are shared between both local bus devices. tristate when 0. */ #define BIM_LOCAL_DEV_PROM 0x02 /* PROM chip select */ #define BIM_LOCAL_DEV_EXT 0x04 /* secondary local bus device chip select output enable */ #define BIM_LOCAL_DEV_SOFT_0 0x08 /* sw programmable ctrl bit 0 */ #define BIM_LOCAL_DEV_SOFT_1 0x10 /* sw programmable ctrl bit 1 */ #define BIM_LOCAL_DEV_HW_RESET 0x20 /* internal hw reset. Cassini+ only. */ /* access 24 entry BIM read and write buffers. put address in REG_BIM_BUFFER_ADDR * and read/write from/to it REG_BIM_BUFFER_DATA_LOW and _DATA_HI. * _DATA_HI should be the last access of the sequence. * DEFAULT: undefined */ #define REG_BIM_BUFFER_ADDR 0x1024 /* BIM buffer address. for purposes. */ #define BIM_BUFFER_ADDR_MASK 0x3F /* index (0 - 23) of buffer */ #define BIM_BUFFER_WR_SELECT 0x40 /* write buffer access = 1 read buffer access = 0 */ /* DEFAULT: undefined */ #define REG_BIM_BUFFER_DATA_LOW 0x1028 /* BIM buffer data low */ #define REG_BIM_BUFFER_DATA_HI 0x102C /* BIM buffer data high */ /* set BIM_RAM_BIST_START to start built-in self test for BIM read buffer. * bit auto-clears when done with status read from _SUMMARY and _PASS bits. */ #define REG_BIM_RAM_BIST 0x102C /* BIM RAM (read buffer) BIST control/status */ #define BIM_RAM_BIST_RD_START 0x01 /* start BIST for BIM read buffer */ #define BIM_RAM_BIST_WR_START 0x02 /* start BIST for BIM write buffer. Cassini only. reserved in Cassini+. */ #define BIM_RAM_BIST_RD_PASS 0x04 /* summary BIST pass status for read buffer. */ #define BIM_RAM_BIST_WR_PASS 0x08 /* summary BIST pass status for write buffer. Cassini only. reserved in Cassini+. */ #define BIM_RAM_BIST_RD_LOW_PASS 0x10 /* read low bank passes BIST */ #define BIM_RAM_BIST_RD_HI_PASS 0x20 /* read high bank passes BIST */ #define BIM_RAM_BIST_WR_LOW_PASS 0x40 /* write low bank passes BIST. Cassini only. reserved in Cassini+. */ #define BIM_RAM_BIST_WR_HI_PASS 0x80 /* write high bank passes BIST. Cassini only. reserved in Cassini+. */ /* ASUN: i'm not sure what this does as it's not in the spec. * DEFAULT: 0xFC */ #define REG_BIM_DIAG_MUX 0x1030 /* BIM diagnostic probe mux select register */ /* enable probe monitoring mode and select data appearing on the P_A* bus. bit * values for _SEL_HI_MASK and _SEL_LOW_MASK: * 0x0: internal probe[7:0] (pci arb state, wtc empty w, wtc full w, wtc empty w, * wtc empty r, post pci) * 0x1: internal probe[15:8] (pci wbuf comp, pci wpkt comp, pci rbuf comp, * pci rpkt comp, txdma wr req, txdma wr ack, * txdma wr rdy, txdma wr xfr done) * 0x2: internal probe[23:16] (txdma rd req, txdma rd ack, txdma rd rdy, rxdma rd, * rd arb state, rd pci state) * 0x3: internal probe[31:24] (rxdma req, rxdma ack, rxdma rdy, wrarb state, * wrpci state) * 0x4: pci io probe[7:0] 0x5: pci io probe[15:8] * 0x6: pci io probe[23:16] 0x7: pci io probe[31:24] * 0x8: pci io probe[39:32] 0x9: pci io probe[47:40] * 0xa: pci io probe[55:48] 0xb: pci io probe[63:56] * the following are not available in Cassini: * 0xc: rx probe[7:0] 0xd: tx probe[7:0] * 0xe: hp probe[7:0] 0xf: mac probe[7:0] */ #define REG_PLUS_PROBE_MUX_SELECT 0x1034 /* Cassini+: PROBE MUX SELECT */ #define PROBE_MUX_EN 0x80000000 /* allow probe signals to be driven on local bus P_A[15:0] for debugging */ #define PROBE_MUX_SUB_MUX_MASK 0x0000FF00 /* select sub module probe signals: 0x03 = mac[1:0] 0x0C = rx[1:0] 0x30 = tx[1:0] 0xC0 = hp[1:0] */ #define PROBE_MUX_SEL_HI_MASK 0x000000F0 /* select which module to appear on P_A[15:8]. see above for values. */ #define PROBE_MUX_SEL_LOW_MASK 0x0000000F /* select which module to appear on P_A[7:0]. see above for values. */ /* values mean the same thing as REG_INTR_MASK excep that it's for INTB. DEFAULT: 0x1F */ #define REG_PLUS_INTR_MASK_1 0x1038 /* Cassini+: interrupt mask register 2 for INTB */ #define REG_PLUS_INTRN_MASK(x) (REG_PLUS_INTR_MASK_1 + ((x) - 1)*16) /* bits correspond to both _MASK and _STATUS registers. _ALT corresponds to * all of the alternate (2-4) INTR registers while _1 corresponds to only * _MASK_1 and _STATUS_1 registers. * DEFAULT: 0x7 for MASK registers, 0x0 for ALIAS_CLEAR registers */ #define INTR_RX_DONE_ALT 0x01 #define INTR_RX_COMP_FULL_ALT 0x02 #define INTR_RX_COMP_AF_ALT 0x04 #define INTR_RX_BUF_UNAVAIL_1 0x08 #define INTR_RX_BUF_AE_1 0x10 /* almost empty */ #define INTRN_MASK_RX_EN 0x80 #define INTRN_MASK_CLEAR_ALL (INTR_RX_DONE_ALT | \ INTR_RX_COMP_FULL_ALT | \ INTR_RX_COMP_AF_ALT | \ INTR_RX_BUF_UNAVAIL_1 | \ INTR_RX_BUF_AE_1) #define REG_PLUS_INTR_STATUS_1 0x103C /* Cassini+: interrupt status register 2 for INTB. default: 0x1F */ #define REG_PLUS_INTRN_STATUS(x) (REG_PLUS_INTR_STATUS_1 + ((x) - 1)*16) #define INTR_STATUS_ALT_INTX_EN 0x80 /* generate INTX when one of the flags are set. enables desc ring. */ #define REG_PLUS_ALIAS_CLEAR_1 0x1040 /* Cassini+: alias clear mask register 2 for INTB */ #define REG_PLUS_ALIASN_CLEAR(x) (REG_PLUS_ALIAS_CLEAR_1 + ((x) - 1)*16) #define REG_PLUS_INTR_STATUS_ALIAS_1 0x1044 /* Cassini+: interrupt status register alias 2 for INTB */ #define REG_PLUS_INTRN_STATUS_ALIAS(x) (REG_PLUS_INTR_STATUS_ALIAS_1 + ((x) - 1)*16) #define REG_SATURN_PCFG 0x106c /* pin configuration register for integrated macphy */ #define SATURN_PCFG_TLA 0x00000001 /* 1 = phy actled */ #define SATURN_PCFG_FLA 0x00000002 /* 1 = phy link10led */ #define SATURN_PCFG_CLA 0x00000004 /* 1 = phy link100led */ #define SATURN_PCFG_LLA 0x00000008 /* 1 = phy link1000led */ #define SATURN_PCFG_RLA 0x00000010 /* 1 = phy duplexled */ #define SATURN_PCFG_PDS 0x00000020 /* phy debug mode. 0 = normal */ #define SATURN_PCFG_MTP 0x00000080 /* test point select */ #define SATURN_PCFG_GMO 0x00000100 /* GMII observe. 1 = GMII on SERDES pins for monitoring. */ #define SATURN_PCFG_FSI 0x00000200 /* 1 = freeze serdes/gmii. all pins configed as outputs. for power saving when using internal phy. */ #define SATURN_PCFG_LAD 0x00000800 /* 0 = mac core led ctrl polarity from strapping value. 1 = mac core led ctrl polarity active low. */ /** transmit dma registers **/ #define MAX_TX_RINGS_SHIFT 2 #define MAX_TX_RINGS (1 << MAX_TX_RINGS_SHIFT) #define MAX_TX_RINGS_MASK (MAX_TX_RINGS - 1) /* TX configuration. * descr ring sizes size = 32 * (1 << n), n < 9. e.g., 0x8 = 8k. default: 0x8 * DEFAULT: 0x3F000001 */ #define REG_TX_CFG 0x2004 /* TX config */ #define TX_CFG_DMA_EN 0x00000001 /* enable TX DMA. if cleared, DMA will stop after xfer of current buffer has been completed. */ #define TX_CFG_FIFO_PIO_SEL 0x00000002 /* TX DMA FIFO can be accessed w/ FIFO addr and data registers. TX DMA should be disabled. */ #define TX_CFG_DESC_RING0_MASK 0x0000003C /* # desc entries in ring 1. */ #define TX_CFG_DESC_RING0_SHIFT 2 #define TX_CFG_DESC_RINGN_MASK(a) (TX_CFG_DESC_RING0_MASK << (a)*4) #define TX_CFG_DESC_RINGN_SHIFT(a) (TX_CFG_DESC_RING0_SHIFT + (a)*4) #define TX_CFG_PACED_MODE 0x00100000 /* TX_ALL only set after TX FIFO becomes empty. if 0, TX_ALL set if descr queue empty. */ #define TX_CFG_DMA_RDPIPE_DIS 0x01000000 /* always set to 1 */ #define TX_CFG_COMPWB_Q1 0x02000000 /* completion writeback happens at the end of every packet kicked through Q1. */ #define TX_CFG_COMPWB_Q2 0x04000000 /* completion writeback happens at the end of every packet kicked through Q2. */ #define TX_CFG_COMPWB_Q3 0x08000000 /* completion writeback happens at the end of every packet kicked through Q3 */ #define TX_CFG_COMPWB_Q4 0x10000000 /* completion writeback happens at the end of every packet kicked through Q4 */ #define TX_CFG_INTR_COMPWB_DIS 0x20000000 /* disable pre-interrupt completion writeback */ #define TX_CFG_CTX_SEL_MASK 0xC0000000 /* selects tx test port connection 0b00: tx mac req, tx mac retry req, tx ack and tx tag. 0b01: txdma rd req, txdma rd ack, txdma rd rdy, txdma rd type0 0b11: txdma wr req, txdma wr ack, txdma wr rdy, txdma wr xfr done. */ #define TX_CFG_CTX_SEL_SHIFT 30 /* 11-bit counters that point to next location in FIFO to be loaded/retrieved. * used for diagnostics only. */ #define REG_TX_FIFO_WRITE_PTR 0x2014 /* TX FIFO write pointer */ #define REG_TX_FIFO_SHADOW_WRITE_PTR 0x2018 /* TX FIFO shadow write pointer. temp hold reg. diagnostics only. */ #define REG_TX_FIFO_READ_PTR 0x201C /* TX FIFO read pointer */ #define REG_TX_FIFO_SHADOW_READ_PTR 0x2020 /* TX FIFO shadow read pointer */ /* (ro) 11-bit up/down counter w/ # of frames currently in TX FIFO */ #define REG_TX_FIFO_PKT_CNT 0x2024 /* TX FIFO packet counter */ /* current state of all state machines in TX */ #define REG_TX_SM_1 0x2028 /* TX state machine reg #1 */ #define TX_SM_1_CHAIN_MASK 0x000003FF /* chaining state machine */ #define TX_SM_1_CSUM_MASK 0x00000C00 /* checksum state machine */ #define TX_SM_1_FIFO_LOAD_MASK 0x0003F000 /* FIFO load state machine. = 0x01 when TX disabled. */ #define TX_SM_1_FIFO_UNLOAD_MASK 0x003C0000 /* FIFO unload state machine */ #define TX_SM_1_CACHE_MASK 0x03C00000 /* desc. prefetch cache controller state machine */ #define TX_SM_1_CBQ_ARB_MASK 0xF8000000 /* CBQ arbiter state machine */ #define REG_TX_SM_2 0x202C /* TX state machine reg #2 */ #define TX_SM_2_COMP_WB_MASK 0x07 /* completion writeback sm */ #define TX_SM_2_SUB_LOAD_MASK 0x38 /* sub load state machine */ #define TX_SM_2_KICK_MASK 0xC0 /* kick state machine */ /* 64-bit pointer to the transmit data buffer. only the 50 LSB are incremented * while the upper 23 bits are taken from the TX descriptor */ #define REG_TX_DATA_PTR_LOW 0x2030 /* TX data pointer low */ #define REG_TX_DATA_PTR_HI 0x2034 /* TX data pointer high */ /* 13 bit registers written by driver w/ descriptor value that follows * last valid xmit descriptor. kick # and complete # values are used by * the xmit dma engine to control tx descr fetching. if > 1 valid * tx descr is available within the cache line being read, cassini will * internally cache up to 4 of them. 0 on reset. _KICK = rw, _COMP = ro. */ #define REG_TX_KICK0 0x2038 /* TX kick reg #1 */ #define REG_TX_KICKN(x) (REG_TX_KICK0 + (x)*4) #define REG_TX_COMP0 0x2048 /* TX completion reg #1 */ #define REG_TX_COMPN(x) (REG_TX_COMP0 + (x)*4) /* values of TX_COMPLETE_1-4 are written. each completion register * is 2bytes in size and contiguous. 8B allocation w/ 8B alignment. * NOTE: completion reg values are only written back prior to TX_INTME and * TX_ALL interrupts. at all other times, the most up-to-date index values * should be obtained from the REG_TX_COMPLETE_# registers. * here's the layout: * offset from base addr completion # byte * 0 TX_COMPLETE_1_MSB * 1 TX_COMPLETE_1_LSB * 2 TX_COMPLETE_2_MSB * 3 TX_COMPLETE_2_LSB * 4 TX_COMPLETE_3_MSB * 5 TX_COMPLETE_3_LSB * 6 TX_COMPLETE_4_MSB * 7 TX_COMPLETE_4_LSB */ #define TX_COMPWB_SIZE 8 #define REG_TX_COMPWB_DB_LOW 0x2058 /* TX completion write back base low */ #define REG_TX_COMPWB_DB_HI 0x205C /* TX completion write back base high */ #define TX_COMPWB_MSB_MASK 0x00000000000000FFULL #define TX_COMPWB_MSB_SHIFT 0 #define TX_COMPWB_LSB_MASK 0x000000000000FF00ULL #define TX_COMPWB_LSB_SHIFT 8 #define TX_COMPWB_NEXT(x) ((x) >> 16) /* 53 MSB used as base address. 11 LSB assumed to be 0. TX desc pointer must * be 2KB-aligned. */ #define REG_TX_DB0_LOW 0x2060 /* TX descriptor base low #1 */ #define REG_TX_DB0_HI 0x2064 /* TX descriptor base hi #1 */ #define REG_TX_DBN_LOW(x) (REG_TX_DB0_LOW + (x)*8) #define REG_TX_DBN_HI(x) (REG_TX_DB0_HI + (x)*8) /* 16-bit registers hold weights for the weighted round-robin of the * four CBQ TX descr rings. weights correspond to # bytes xferred from * host to TXFIFO in a round of WRR arbitration. can be set * dynamically with new weights set upon completion of the current * packet transfer from host memory to TXFIFO. a dummy write to any of * these registers causes a queue1 pre-emption with all historical bw * deficit data reset to 0 (useful when congestion requires a * pre-emption/re-allocation of network bandwidth */ #define REG_TX_MAXBURST_0 0x2080 /* TX MaxBurst #1 */ #define REG_TX_MAXBURST_1 0x2084 /* TX MaxBurst #2 */ #define REG_TX_MAXBURST_2 0x2088 /* TX MaxBurst #3 */ #define REG_TX_MAXBURST_3 0x208C /* TX MaxBurst #4 */ /* diagnostics access to any TX FIFO location. every access is 65 * bits. _DATA_LOW = 32 LSB, _DATA_HI_T1/T0 = 32 MSB. _TAG = tag bit. * writing _DATA_HI_T0 sets tag bit low, writing _DATA_HI_T1 sets tag * bit high. TX_FIFO_PIO_SEL must be set for TX FIFO PIO access. if * TX FIFO data integrity is desired, TX DMA should be * disabled. _DATA_HI_Tx should be the last access of the sequence. */ #define REG_TX_FIFO_ADDR 0x2104 /* TX FIFO address */ #define REG_TX_FIFO_TAG 0x2108 /* TX FIFO tag */ #define REG_TX_FIFO_DATA_LOW 0x210C /* TX FIFO data low */ #define REG_TX_FIFO_DATA_HI_T1 0x2110 /* TX FIFO data high t1 */ #define REG_TX_FIFO_DATA_HI_T0 0x2114 /* TX FIFO data high t0 */ #define REG_TX_FIFO_SIZE 0x2118 /* (ro) TX FIFO size = 0x090 = 9KB */ /* 9-bit register controls BIST of TX FIFO. bit set indicates that the BIST * passed for the specified memory */ #define REG_TX_RAMBIST 0x211C /* TX RAMBIST control/status */ #define TX_RAMBIST_STATE 0x01C0 /* progress state of RAMBIST controller state machine */ #define TX_RAMBIST_RAM33A_PASS 0x0020 /* RAM33A passed */ #define TX_RAMBIST_RAM32A_PASS 0x0010 /* RAM32A passed */ #define TX_RAMBIST_RAM33B_PASS 0x0008 /* RAM33B passed */ #define TX_RAMBIST_RAM32B_PASS 0x0004 /* RAM32B passed */ #define TX_RAMBIST_SUMMARY 0x0002 /* all RAM passed */ #define TX_RAMBIST_START 0x0001 /* write 1 to start BIST. self clears on completion. */ /** receive dma registers **/ #define MAX_RX_DESC_RINGS 2 #define MAX_RX_COMP_RINGS 4 /* receive DMA channel configuration. default: 0x80910 * free ring size = (1 << n)*32 -> [32 - 8k] * completion ring size = (1 << n)*128 -> [128 - 32k], n < 9 * DEFAULT: 0x80910 */ #define REG_RX_CFG 0x4000 /* RX config */ #define RX_CFG_DMA_EN 0x00000001 /* enable RX DMA. 0 stops channel as soon as current frame xfer has completed. driver should disable MAC for 200ms before disabling RX */ #define RX_CFG_DESC_RING_MASK 0x0000001E /* # desc entries in RX free desc ring. def: 0x8 = 8k */ #define RX_CFG_DESC_RING_SHIFT 1 #define RX_CFG_COMP_RING_MASK 0x000001E0 /* # desc entries in RX complete ring. def: 0x8 = 32k */ #define RX_CFG_COMP_RING_SHIFT 5 #define RX_CFG_BATCH_DIS 0x00000200 /* disable receive desc batching. def: 0x0 = enabled */ #define RX_CFG_SWIVEL_MASK 0x00001C00 /* byte offset of the 1st data byte of the packet w/in 8 byte boundares. this swivels the data DMA'ed to header buffers, jumbo buffers when header split is not requested and MTU sized buffers. def: 0x2 */ #define RX_CFG_SWIVEL_SHIFT 10 /* cassini+ only */ #define RX_CFG_DESC_RING1_MASK 0x000F0000 /* # of desc entries in RX free desc ring 2. def: 0x8 = 8k */ #define RX_CFG_DESC_RING1_SHIFT 16 /* the page size register allows cassini chips to do the following with * received data: * [--------------------------------------------------------------] page * [off][buf1][pad][off][buf2][pad][off][buf3][pad][off][buf4][pad] * |--------------| = PAGE_SIZE_BUFFER_STRIDE * page = PAGE_SIZE * offset = PAGE_SIZE_MTU_OFF * for the above example, MTU_BUFFER_COUNT = 4. * NOTE: as is apparent, you need to ensure that the following holds: * MTU_BUFFER_COUNT <= PAGE_SIZE/PAGE_SIZE_BUFFER_STRIDE * DEFAULT: 0x48002002 (8k pages) */ #define REG_RX_PAGE_SIZE 0x4004 /* RX page size */ #define RX_PAGE_SIZE_MASK 0x00000003 /* size of pages pointed to by receive descriptors. if jumbo buffers are supported the page size should not be < 8k. 0b00 = 2k, 0b01 = 4k 0b10 = 8k, 0b11 = 16k DEFAULT: 8k */ #define RX_PAGE_SIZE_SHIFT 0 #define RX_PAGE_SIZE_MTU_COUNT_MASK 0x00007800 /* # of MTU buffers the hw packs into a page. DEFAULT: 4 */ #define RX_PAGE_SIZE_MTU_COUNT_SHIFT 11 #define RX_PAGE_SIZE_MTU_STRIDE_MASK 0x18000000 /* # of bytes that separate each MTU buffer + offset from each other. 0b00 = 1k, 0b01 = 2k 0b10 = 4k, 0b11 = 8k DEFAULT: 0x1 */ #define RX_PAGE_SIZE_MTU_STRIDE_SHIFT 27 #define RX_PAGE_SIZE_MTU_OFF_MASK 0xC0000000 /* offset in each page that hw writes the MTU buffer into. 0b00 = 0, 0b01 = 64 bytes 0b10 = 96, 0b11 = 128 DEFAULT: 0x1 */ #define RX_PAGE_SIZE_MTU_OFF_SHIFT 30 /* 11-bit counter points to next location in RX FIFO to be loaded/read. * shadow write pointers enable retries in case of early receive aborts. * DEFAULT: 0x0. generated on 64-bit boundaries. */ #define REG_RX_FIFO_WRITE_PTR 0x4008 /* RX FIFO write pointer */ #define REG_RX_FIFO_READ_PTR 0x400C /* RX FIFO read pointer */ #define REG_RX_IPP_FIFO_SHADOW_WRITE_PTR 0x4010 /* RX IPP FIFO shadow write pointer */ #define REG_RX_IPP_FIFO_SHADOW_READ_PTR 0x4014 /* RX IPP FIFO shadow read pointer */ #define REG_RX_IPP_FIFO_READ_PTR 0x400C /* RX IPP FIFO read pointer. (8-bit counter) */ /* current state of RX DMA state engines + other info * DEFAULT: 0x0 */ #define REG_RX_DEBUG 0x401C /* RX debug */ #define RX_DEBUG_LOAD_STATE_MASK 0x0000000F /* load state machine w/ MAC: 0x0 = idle, 0x1 = load_bop 0x2 = load 1, 0x3 = load 2 0x4 = load 3, 0x5 = load 4 0x6 = last detect 0x7 = wait req 0x8 = wait req statuss 1st 0x9 = load st 0xa = bubble mac 0xb = error */ #define RX_DEBUG_LM_STATE_MASK 0x00000070 /* load state machine w/ HP and RX FIFO: 0x0 = idle, 0x1 = hp xfr 0x2 = wait hp ready 0x3 = wait flow code 0x4 = fifo xfer 0x5 = make status 0x6 = csum ready 0x7 = error */ #define RX_DEBUG_FC_STATE_MASK 0x000000180 /* flow control state machine w/ MAC: 0x0 = idle 0x1 = wait xoff ack 0x2 = wait xon 0x3 = wait xon ack */ #define RX_DEBUG_DATA_STATE_MASK 0x000001E00 /* unload data state machine states: 0x0 = idle data 0x1 = header begin 0x2 = xfer header 0x3 = xfer header ld 0x4 = mtu begin 0x5 = xfer mtu 0x6 = xfer mtu ld 0x7 = jumbo begin 0x8 = xfer jumbo 0x9 = xfer jumbo ld 0xa = reas begin 0xb = xfer reas 0xc = flush tag 0xd = xfer reas ld 0xe = error 0xf = bubble idle */ #define RX_DEBUG_DESC_STATE_MASK 0x0001E000 /* unload desc state machine states: 0x0 = idle desc 0x1 = wait ack 0x9 = wait ack 2 0x2 = fetch desc 1 0xa = fetch desc 2 0x3 = load ptrs 0x4 = wait dma 0x5 = wait ack batch 0x6 = post batch 0x7 = xfr done */ #define RX_DEBUG_INTR_READ_PTR_MASK 0x30000000 /* interrupt read ptr of the interrupt queue */ #define RX_DEBUG_INTR_WRITE_PTR_MASK 0xC0000000 /* interrupt write pointer of the interrupt queue */ /* flow control frames are emitted using two PAUSE thresholds: * XOFF PAUSE uses pause time value pre-programmed in the Send PAUSE MAC reg * XON PAUSE uses a pause time of 0. granularity of threshold is 64bytes. * PAUSE thresholds defined in terms of FIFO occupancy and may be translated * into FIFO vacancy using RX_FIFO_SIZE. setting ON will trigger XON frames * when FIFO reaches 0. OFF threshold should not be > size of RX FIFO. max * value is is 0x6F. * DEFAULT: 0x00078 */ #define REG_RX_PAUSE_THRESH 0x4020 /* RX pause thresholds */ #define RX_PAUSE_THRESH_QUANTUM 64 #define RX_PAUSE_THRESH_OFF_MASK 0x000001FF /* XOFF PAUSE emitted when RX FIFO occupancy > value*64B */ #define RX_PAUSE_THRESH_OFF_SHIFT 0 #define RX_PAUSE_THRESH_ON_MASK 0x001FF000 /* XON PAUSE emitted after emitting XOFF PAUSE when RX FIFO occupancy falls below this value*64B. must be < XOFF threshold. if = RX_FIFO_SIZE< XON frames are never emitted. */ #define RX_PAUSE_THRESH_ON_SHIFT 12 /* 13-bit register used to control RX desc fetching and intr generation. if 4+ * valid RX descriptors are available, Cassini will read 4 at a time. * writing N means that all desc up to *but* excluding N are available. N must * be a multiple of 4 (N % 4 = 0). first desc should be cache-line aligned. * DEFAULT: 0 on reset */ #define REG_RX_KICK 0x4024 /* RX kick reg */ /* 8KB aligned 64-bit pointer to the base of the RX free/completion rings. * lower 13 bits of the low register are hard-wired to 0. */ #define REG_RX_DB_LOW 0x4028 /* RX descriptor ring base low */ #define REG_RX_DB_HI 0x402C /* RX descriptor ring base hi */ #define REG_RX_CB_LOW 0x4030 /* RX completion ring base low */ #define REG_RX_CB_HI 0x4034 /* RX completion ring base hi */ /* 13-bit register indicate desc used by cassini for receive frames. used * for diagnostic purposes. * DEFAULT: 0 on reset */ #define REG_RX_COMP 0x4038 /* (ro) RX completion */ /* HEAD and TAIL are used to control RX desc posting and interrupt * generation. hw moves the head register to pass ownership to sw. sw * moves the tail register to pass ownership back to hw. to give all * entries to hw, set TAIL = HEAD. if HEAD and TAIL indicate that no * more entries are available, DMA will pause and an interrupt will be * generated to indicate no more entries are available. sw can use * this interrupt to reduce the # of times it must update the * completion tail register. * DEFAULT: 0 on reset */ #define REG_RX_COMP_HEAD 0x403C /* RX completion head */ #define REG_RX_COMP_TAIL 0x4040 /* RX completion tail */ /* values used for receive interrupt blanking. loaded each time the ISR is read * DEFAULT: 0x00000000 */ #define REG_RX_BLANK 0x4044 /* RX blanking register for ISR read */ #define RX_BLANK_INTR_PKT_MASK 0x000001FF /* RX_DONE intr asserted if this many sets of completion writebacks (up to 2 packets) occur since the last time the ISR was read. 0 = no packet blanking */ #define RX_BLANK_INTR_PKT_SHIFT 0 #define RX_BLANK_INTR_TIME_MASK 0x3FFFF000 /* RX_DONE interrupt asserted if that many clocks were counted since last time the ISR was read. each count is 512 core clocks (125MHz). 0 = no time blanking */ #define RX_BLANK_INTR_TIME_SHIFT 12 /* values used for interrupt generation based on threshold values of how * many free desc and completion entries are available for hw use. * DEFAULT: 0x00000000 */ #define REG_RX_AE_THRESH 0x4048 /* RX almost empty thresholds */ #define RX_AE_THRESH_FREE_MASK 0x00001FFF /* RX_BUF_AE will be generated if # desc avail for hw use <= # */ #define RX_AE_THRESH_FREE_SHIFT 0 #define RX_AE_THRESH_COMP_MASK 0x0FFFE000 /* RX_COMP_AE will be generated if # of completion entries avail for hw use <= # */ #define RX_AE_THRESH_COMP_SHIFT 13 /* probabilities for random early drop (RED) thresholds on a FIFO threshold * basis. probability should increase when the FIFO level increases. control * packets are never dropped and not counted in stats. probability programmed * on a 12.5% granularity. e.g., 0x1 = 1/8 packets dropped. * DEFAULT: 0x00000000 */ #define REG_RX_RED 0x404C /* RX random early detect enable */ #define RX_RED_4K_6K_FIFO_MASK 0x000000FF /* 4KB < FIFO thresh < 6KB */ #define RX_RED_6K_8K_FIFO_MASK 0x0000FF00 /* 6KB < FIFO thresh < 8KB */ #define RX_RED_8K_10K_FIFO_MASK 0x00FF0000 /* 8KB < FIFO thresh < 10KB */ #define RX_RED_10K_12K_FIFO_MASK 0xFF000000 /* 10KB < FIFO thresh < 12KB */ /* FIFO fullness levels for RX FIFO, RX control FIFO, and RX IPP FIFO. * RX control FIFO = # of packets in RX FIFO. * DEFAULT: 0x0 */ #define REG_RX_FIFO_FULLNESS 0x4050 /* (ro) RX FIFO fullness */ #define RX_FIFO_FULLNESS_RX_FIFO_MASK 0x3FF80000 /* level w/ 8B granularity */ #define RX_FIFO_FULLNESS_IPP_FIFO_MASK 0x0007FF00 /* level w/ 8B granularity */ #define RX_FIFO_FULLNESS_RX_PKT_MASK 0x000000FF /* # packets in RX FIFO */ #define REG_RX_IPP_PACKET_COUNT 0x4054 /* RX IPP packet counter */ #define REG_RX_WORK_DMA_PTR_LOW 0x4058 /* RX working DMA ptr low */ #define REG_RX_WORK_DMA_PTR_HI 0x405C /* RX working DMA ptr high */ /* BIST testing ro RX FIFO, RX control FIFO, and RX IPP FIFO. only RX BIST * START/COMPLETE is writeable. START will clear when the BIST has completed * checking all 17 RAMS. * DEFAULT: 0bxxxx xxxxx xxxx xxxx xxxx x000 0000 0000 00x0 */ #define REG_RX_BIST 0x4060 /* (ro) RX BIST */ #define RX_BIST_32A_PASS 0x80000000 /* RX FIFO 32A passed */ #define RX_BIST_33A_PASS 0x40000000 /* RX FIFO 33A passed */ #define RX_BIST_32B_PASS 0x20000000 /* RX FIFO 32B passed */ #define RX_BIST_33B_PASS 0x10000000 /* RX FIFO 33B passed */ #define RX_BIST_32C_PASS 0x08000000 /* RX FIFO 32C passed */ #define RX_BIST_33C_PASS 0x04000000 /* RX FIFO 33C passed */ #define RX_BIST_IPP_32A_PASS 0x02000000 /* RX IPP FIFO 33B passed */ #define RX_BIST_IPP_33A_PASS 0x01000000 /* RX IPP FIFO 33A passed */ #define RX_BIST_IPP_32B_PASS 0x00800000 /* RX IPP FIFO 32B passed */ #define RX_BIST_IPP_33B_PASS 0x00400000 /* RX IPP FIFO 33B passed */ #define RX_BIST_IPP_32C_PASS 0x00200000 /* RX IPP FIFO 32C passed */ #define RX_BIST_IPP_33C_PASS 0x00100000 /* RX IPP FIFO 33C passed */ #define RX_BIST_CTRL_32_PASS 0x00800000 /* RX CTRL FIFO 32 passed */ #define RX_BIST_CTRL_33_PASS 0x00400000 /* RX CTRL FIFO 33 passed */ #define RX_BIST_REAS_26A_PASS 0x00200000 /* RX Reas 26A passed */ #define RX_BIST_REAS_26B_PASS 0x00100000 /* RX Reas 26B passed */ #define RX_BIST_REAS_27_PASS 0x00080000 /* RX Reas 27 passed */ #define RX_BIST_STATE_MASK 0x00078000 /* BIST state machine */ #define RX_BIST_SUMMARY 0x00000002 /* when BIST complete, summary pass bit contains AND of BIST results of all 16 RAMS */ #define RX_BIST_START 0x00000001 /* write 1 to start BIST. self clears on completion. */ /* next location in RX CTRL FIFO that will be loaded w/ data from RX IPP/read * from to retrieve packet control info. * DEFAULT: 0 */ #define REG_RX_CTRL_FIFO_WRITE_PTR 0x4064 /* (ro) RX control FIFO write ptr */ #define REG_RX_CTRL_FIFO_READ_PTR 0x4068 /* (ro) RX control FIFO read ptr */ /* receive interrupt blanking. loaded each time interrupt alias register is * read. * DEFAULT: 0x0 */ #define REG_RX_BLANK_ALIAS_READ 0x406C /* RX blanking register for alias read */ #define RX_BAR_INTR_PACKET_MASK 0x000001FF /* assert RX_DONE if # completion writebacks > # since last ISR read. 0 = no blanking. up to 2 packets per completion wb. */ #define RX_BAR_INTR_TIME_MASK 0x3FFFF000 /* assert RX_DONE if # clocks > # since last ISR read. each count is 512 core clocks (125MHz). 0 = no blanking. */ /* diagnostic access to RX FIFO. 32 LSB accessed via DATA_LOW. 32 MSB accessed * via DATA_HI_T0 or DATA_HI_T1. TAG reads the tag bit. writing HI_T0 * will unset the tag bit while writing HI_T1 will set the tag bit. to reset * to normal operation after diagnostics, write to address location 0x0. * RX_DMA_EN bit must be set to 0x0 for RX FIFO PIO access. DATA_HI should * be the last write access of a write sequence. * DEFAULT: undefined */ #define REG_RX_FIFO_ADDR 0x4080 /* RX FIFO address */ #define REG_RX_FIFO_TAG 0x4084 /* RX FIFO tag */ #define REG_RX_FIFO_DATA_LOW 0x4088 /* RX FIFO data low */ #define REG_RX_FIFO_DATA_HI_T0 0x408C /* RX FIFO data high T0 */ #define REG_RX_FIFO_DATA_HI_T1 0x4090 /* RX FIFO data high T1 */ /* diagnostic assess to RX CTRL FIFO. 8-bit FIFO_ADDR holds address of * 81 bit control entry and 6 bit flow id. LOW and MID are both 32-bit * accesses. HI is 7-bits with 6-bit flow id and 1 bit control * word. RX_DMA_EN must be 0 for RX CTRL FIFO PIO access. DATA_HI * should be last write access of the write sequence. * DEFAULT: undefined */ #define REG_RX_CTRL_FIFO_ADDR 0x4094 /* RX Control FIFO and Batching FIFO addr */ #define REG_RX_CTRL_FIFO_DATA_LOW 0x4098 /* RX Control FIFO data low */ #define REG_RX_CTRL_FIFO_DATA_MID 0x409C /* RX Control FIFO data mid */ #define REG_RX_CTRL_FIFO_DATA_HI 0x4100 /* RX Control FIFO data hi and flow id */ #define RX_CTRL_FIFO_DATA_HI_CTRL 0x0001 /* upper bit of ctrl word */ #define RX_CTRL_FIFO_DATA_HI_FLOW_MASK 0x007E /* flow id */ /* diagnostic access to RX IPP FIFO. same semantics as RX_FIFO. * DEFAULT: undefined */ #define REG_RX_IPP_FIFO_ADDR 0x4104 /* RX IPP FIFO address */ #define REG_RX_IPP_FIFO_TAG 0x4108 /* RX IPP FIFO tag */ #define REG_RX_IPP_FIFO_DATA_LOW 0x410C /* RX IPP FIFO data low */ #define REG_RX_IPP_FIFO_DATA_HI_T0 0x4110 /* RX IPP FIFO data high T0 */ #define REG_RX_IPP_FIFO_DATA_HI_T1 0x4114 /* RX IPP FIFO data high T1 */ /* 64-bit pointer to receive data buffer in host memory used for headers and * small packets. MSB in high register. loaded by DMA state machine and * increments as DMA writes receive data. only 50 LSB are incremented. top * 13 bits taken from RX descriptor. * DEFAULT: undefined */ #define REG_RX_HEADER_PAGE_PTR_LOW 0x4118 /* (ro) RX header page ptr low */ #define REG_RX_HEADER_PAGE_PTR_HI 0x411C /* (ro) RX header page ptr high */ #define REG_RX_MTU_PAGE_PTR_LOW 0x4120 /* (ro) RX MTU page pointer low */ #define REG_RX_MTU_PAGE_PTR_HI 0x4124 /* (ro) RX MTU page pointer high */ /* PIO diagnostic access to RX reassembly DMA Table RAM. 6-bit register holds * one of 64 79-bit locations in the RX Reassembly DMA table and the addr of * one of the 64 byte locations in the Batching table. LOW holds 32 LSB. * MID holds the next 32 LSB. HIGH holds the 15 MSB. RX_DMA_EN must be set * to 0 for PIO access. DATA_HIGH should be last write of write sequence. * layout: * reassmbl ptr [78:15] | reassmbl index [14:1] | reassmbl entry valid [0] * DEFAULT: undefined */ #define REG_RX_TABLE_ADDR 0x4128 /* RX reassembly DMA table address */ #define RX_TABLE_ADDR_MASK 0x0000003F /* address mask */ #define REG_RX_TABLE_DATA_LOW 0x412C /* RX reassembly DMA table data low */ #define REG_RX_TABLE_DATA_MID 0x4130 /* RX reassembly DMA table data mid */ #define REG_RX_TABLE_DATA_HI 0x4134 /* RX reassembly DMA table data high */ /* cassini+ only */ /* 8KB aligned 64-bit pointer to base of RX rings. lower 13 bits hardwired to * 0. same semantics as primary desc/complete rings. */ #define REG_PLUS_RX_DB1_LOW 0x4200 /* RX descriptor ring 2 base low */ #define REG_PLUS_RX_DB1_HI 0x4204 /* RX descriptor ring 2 base high */ #define REG_PLUS_RX_CB1_LOW 0x4208 /* RX completion ring 2 base low. 4 total */ #define REG_PLUS_RX_CB1_HI 0x420C /* RX completion ring 2 base high. 4 total */ #define REG_PLUS_RX_CBN_LOW(x) (REG_PLUS_RX_CB1_LOW + 8*((x) - 1)) #define REG_PLUS_RX_CBN_HI(x) (REG_PLUS_RX_CB1_HI + 8*((x) - 1)) #define REG_PLUS_RX_KICK1 0x4220 /* RX Kick 2 register */ #define REG_PLUS_RX_COMP1 0x4224 /* (ro) RX completion 2 reg */ #define REG_PLUS_RX_COMP1_HEAD 0x4228 /* (ro) RX completion 2 head reg. 4 total. */ #define REG_PLUS_RX_COMP1_TAIL 0x422C /* RX completion 2 tail reg. 4 total. */ #define REG_PLUS_RX_COMPN_HEAD(x) (REG_PLUS_RX_COMP1_HEAD + 8*((x) - 1)) #define REG_PLUS_RX_COMPN_TAIL(x) (REG_PLUS_RX_COMP1_TAIL + 8*((x) - 1)) #define REG_PLUS_RX_AE1_THRESH 0x4240 /* RX almost empty 2 thresholds */ #define RX_AE1_THRESH_FREE_MASK RX_AE_THRESH_FREE_MASK #define RX_AE1_THRESH_FREE_SHIFT RX_AE_THRESH_FREE_SHIFT /** header parser registers **/ /* RX parser configuration register. * DEFAULT: 0x1651004 */ #define REG_HP_CFG 0x4140 /* header parser configuration reg */ #define HP_CFG_PARSE_EN 0x00000001 /* enab header parsing */ #define HP_CFG_NUM_CPU_MASK 0x000000FC /* # processors 0 = 64. 0x3f = 63 */ #define HP_CFG_NUM_CPU_SHIFT 2 #define HP_CFG_SYN_INC_MASK 0x00000100 /* SYN bit won't increment TCP seq # by one when stored in FDBM */ #define HP_CFG_TCP_THRESH_MASK 0x000FFE00 /* # bytes of TCP data needed to be considered for reassembly */ #define HP_CFG_TCP_THRESH_SHIFT 9 /* access to RX Instruction RAM. 5-bit register/counter holds addr * of 39 bit entry to be read/written. 32 LSB in _DATA_LOW. 7 MSB in _DATA_HI. * RX_DMA_EN must be 0 for RX instr PIO access. DATA_HI should be last access * of sequence. * DEFAULT: undefined */ #define REG_HP_INSTR_RAM_ADDR 0x4144 /* HP instruction RAM address */ #define HP_INSTR_RAM_ADDR_MASK 0x01F /* 5-bit mask */ #define REG_HP_INSTR_RAM_DATA_LOW 0x4148 /* HP instruction RAM data low */ #define HP_INSTR_RAM_LOW_OUTMASK_MASK 0x0000FFFF #define HP_INSTR_RAM_LOW_OUTMASK_SHIFT 0 #define HP_INSTR_RAM_LOW_OUTSHIFT_MASK 0x000F0000 #define HP_INSTR_RAM_LOW_OUTSHIFT_SHIFT 16 #define HP_INSTR_RAM_LOW_OUTEN_MASK 0x00300000 #define HP_INSTR_RAM_LOW_OUTEN_SHIFT 20 #define HP_INSTR_RAM_LOW_OUTARG_MASK 0xFFC00000 #define HP_INSTR_RAM_LOW_OUTARG_SHIFT 22 #define REG_HP_INSTR_RAM_DATA_MID 0x414C /* HP instruction RAM data mid */ #define HP_INSTR_RAM_MID_OUTARG_MASK 0x00000003 #define HP_INSTR_RAM_MID_OUTARG_SHIFT 0 #define HP_INSTR_RAM_MID_OUTOP_MASK 0x0000003C #define HP_INSTR_RAM_MID_OUTOP_SHIFT 2 #define HP_INSTR_RAM_MID_FNEXT_MASK 0x000007C0 #define HP_INSTR_RAM_MID_FNEXT_SHIFT 6 #define HP_INSTR_RAM_MID_FOFF_MASK 0x0003F800 #define HP_INSTR_RAM_MID_FOFF_SHIFT 11 #define HP_INSTR_RAM_MID_SNEXT_MASK 0x007C0000 #define HP_INSTR_RAM_MID_SNEXT_SHIFT 18 #define HP_INSTR_RAM_MID_SOFF_MASK 0x3F800000 #define HP_INSTR_RAM_MID_SOFF_SHIFT 23 #define HP_INSTR_RAM_MID_OP_MASK 0xC0000000 #define HP_INSTR_RAM_MID_OP_SHIFT 30 #define REG_HP_INSTR_RAM_DATA_HI 0x4150 /* HP instruction RAM data high */ #define HP_INSTR_RAM_HI_VAL_MASK 0x0000FFFF #define HP_INSTR_RAM_HI_VAL_SHIFT 0 #define HP_INSTR_RAM_HI_MASK_MASK 0xFFFF0000 #define HP_INSTR_RAM_HI_MASK_SHIFT 16 /* PIO access into RX Header parser data RAM and flow database. * 11-bit register. Data fills the LSB portion of bus if less than 32 bits. * DATA_RAM: write RAM_FDB_DATA with index to access DATA_RAM. * RAM bytes = 4*(x - 1) + [3:0]. e.g., 0 -> [3:0], 31 -> [123:120] * FLOWDB: write DATA_RAM_FDB register and then read/write FDB1-12 to access * flow database. * RX_DMA_EN must be 0 for RX parser RAM PIO access. RX Parser RAM data reg * should be the last write access of the write sequence. * DEFAULT: undefined */ #define REG_HP_DATA_RAM_FDB_ADDR 0x4154 /* HP data and FDB RAM address */ #define HP_DATA_RAM_FDB_DATA_MASK 0x001F /* select 1 of 86 byte locations in header parser data ram to read/write */ #define HP_DATA_RAM_FDB_FDB_MASK 0x3F00 /* 1 of 64 353-bit locations in the flow database */ #define REG_HP_DATA_RAM_DATA 0x4158 /* HP data RAM data */ /* HP flow database registers: 1 - 12, 0x415C - 0x4188, 4 8-bit bytes * FLOW_DB(1) = IP_SA[127:96], FLOW_DB(2) = IP_SA[95:64] * FLOW_DB(3) = IP_SA[63:32], FLOW_DB(4) = IP_SA[31:0] * FLOW_DB(5) = IP_DA[127:96], FLOW_DB(6) = IP_DA[95:64] * FLOW_DB(7) = IP_DA[63:32], FLOW_DB(8) = IP_DA[31:0] * FLOW_DB(9) = {TCP_SP[15:0],TCP_DP[15:0]} * FLOW_DB(10) = bit 0 has value for flow valid * FLOW_DB(11) = TCP_SEQ[63:32], FLOW_DB(12) = TCP_SEQ[31:0] */ #define REG_HP_FLOW_DB0 0x415C /* HP flow database 1 reg */ #define REG_HP_FLOW_DBN(x) (REG_HP_FLOW_DB0 + (x)*4) /* diagnostics for RX Header Parser block. * ASUN: the header parser state machine register is used for diagnostics * purposes. however, the spec doesn't have any details on it. */ #define REG_HP_STATE_MACHINE 0x418C /* (ro) HP state machine */ #define REG_HP_STATUS0 0x4190 /* (ro) HP status 1 */ #define HP_STATUS0_SAP_MASK 0xFFFF0000 /* SAP */ #define HP_STATUS0_L3_OFF_MASK 0x0000FE00 /* L3 offset */ #define HP_STATUS0_LB_CPUNUM_MASK 0x000001F8 /* load balancing CPU number */ #define HP_STATUS0_HRP_OPCODE_MASK 0x00000007 /* HRP opcode */ #define REG_HP_STATUS1 0x4194 /* (ro) HP status 2 */ #define HP_STATUS1_ACCUR2_MASK 0xE0000000 /* accu R2[6:4] */ #define HP_STATUS1_FLOWID_MASK 0x1F800000 /* flow id */ #define HP_STATUS1_TCP_OFF_MASK 0x007F0000 /* tcp payload offset */ #define HP_STATUS1_TCP_SIZE_MASK 0x0000FFFF /* tcp payload size */ #define REG_HP_STATUS2 0x4198 /* (ro) HP status 3 */ #define HP_STATUS2_ACCUR2_MASK 0xF0000000 /* accu R2[3:0] */ #define HP_STATUS2_CSUM_OFF_MASK 0x07F00000 /* checksum start start offset */ #define HP_STATUS2_ACCUR1_MASK 0x000FE000 /* accu R1 */ #define HP_STATUS2_FORCE_DROP 0x00001000 /* force drop */ #define HP_STATUS2_BWO_REASSM 0x00000800 /* batching w/o reassembly */ #define HP_STATUS2_JH_SPLIT_EN 0x00000400 /* jumbo header split enable */ #define HP_STATUS2_FORCE_TCP_NOCHECK 0x00000200 /* force tcp no payload check */ #define HP_STATUS2_DATA_MASK_ZERO 0x00000100 /* mask of data length equal to zero */ #define HP_STATUS2_FORCE_TCP_CHECK 0x00000080 /* force tcp payload chk */ #define HP_STATUS2_MASK_TCP_THRESH 0x00000040 /* mask of payload threshold */ #define HP_STATUS2_NO_ASSIST 0x00000020 /* no assist */ #define HP_STATUS2_CTRL_PACKET_FLAG 0x00000010 /* control packet flag */ #define HP_STATUS2_TCP_FLAG_CHECK 0x00000008 /* tcp flag check */ #define HP_STATUS2_SYN_FLAG 0x00000004 /* syn flag */ #define HP_STATUS2_TCP_CHECK 0x00000002 /* tcp payload chk */ #define HP_STATUS2_TCP_NOCHECK 0x00000001 /* tcp no payload chk */ /* BIST for header parser(HP) and flow database memories (FDBM). set _START * to start BIST. controller clears _START on completion. _START can also * be cleared to force termination of BIST. a bit set indicates that that * memory passed its BIST. */ #define REG_HP_RAM_BIST 0x419C /* HP RAM BIST reg */ #define HP_RAM_BIST_HP_DATA_PASS 0x80000000 /* HP data ram */ #define HP_RAM_BIST_HP_INSTR0_PASS 0x40000000 /* HP instr ram 0 */ #define HP_RAM_BIST_HP_INSTR1_PASS 0x20000000 /* HP instr ram 1 */ #define HP_RAM_BIST_HP_INSTR2_PASS 0x10000000 /* HP instr ram 2 */ #define HP_RAM_BIST_FDBM_AGE0_PASS 0x08000000 /* FDBM aging RAM0 */ #define HP_RAM_BIST_FDBM_AGE1_PASS 0x04000000 /* FDBM aging RAM1 */ #define HP_RAM_BIST_FDBM_FLOWID00_PASS 0x02000000 /* FDBM flowid RAM0 bank 0 */ #define HP_RAM_BIST_FDBM_FLOWID10_PASS 0x01000000 /* FDBM flowid RAM1 bank 0 */ #define HP_RAM_BIST_FDBM_FLOWID20_PASS 0x00800000 /* FDBM flowid RAM2 bank 0 */ #define HP_RAM_BIST_FDBM_FLOWID30_PASS 0x00400000 /* FDBM flowid RAM3 bank 0 */ #define HP_RAM_BIST_FDBM_FLOWID01_PASS 0x00200000 /* FDBM flowid RAM0 bank 1 */ #define HP_RAM_BIST_FDBM_FLOWID11_PASS 0x00100000 /* FDBM flowid RAM1 bank 2 */ #define HP_RAM_BIST_FDBM_FLOWID21_PASS 0x00080000 /* FDBM flowid RAM2 bank 1 */ #define HP_RAM_BIST_FDBM_FLOWID31_PASS 0x00040000 /* FDBM flowid RAM3 bank 1 */ #define HP_RAM_BIST_FDBM_TCPSEQ_PASS 0x00020000 /* FDBM tcp sequence RAM */ #define HP_RAM_BIST_SUMMARY 0x00000002 /* all BIST tests */ #define HP_RAM_BIST_START 0x00000001 /* start/stop BIST */ /** MAC registers. **/ /* reset bits are set using a PIO write and self-cleared after the command * execution has completed. */ #define REG_MAC_TX_RESET 0x6000 /* TX MAC software reset command (default: 0x0) */ #define REG_MAC_RX_RESET 0x6004 /* RX MAC software reset command (default: 0x0) */ /* execute a pause flow control frame transmission DEFAULT: 0x0XXXX */ #define REG_MAC_SEND_PAUSE 0x6008 /* send pause command reg */ #define MAC_SEND_PAUSE_TIME_MASK 0x0000FFFF /* value of pause time to be sent on network in units of slot times */ #define MAC_SEND_PAUSE_SEND 0x00010000 /* send pause flow ctrl frame on network */ /* bit set indicates that event occurred. auto-cleared when status register * is read and have corresponding mask bits in mask register. events will * trigger an interrupt if the corresponding mask bit is 0. * status register default: 0x00000000 * mask register default = 0xFFFFFFFF on reset */ #define REG_MAC_TX_STATUS 0x6010 /* TX MAC status reg */ #define MAC_TX_FRAME_XMIT 0x0001 /* successful frame transmision */ #define MAC_TX_UNDERRUN 0x0002 /* terminated frame transmission due to data starvation in the xmit data path */ #define MAC_TX_MAX_PACKET_ERR 0x0004 /* frame exceeds max allowed length passed to TX MAC by the DMA engine */ #define MAC_TX_COLL_NORMAL 0x0008 /* rollover of the normal collision counter */ #define MAC_TX_COLL_EXCESS 0x0010 /* rollover of the excessive collision counter */ #define MAC_TX_COLL_LATE 0x0020 /* rollover of the late collision counter */ #define MAC_TX_COLL_FIRST 0x0040 /* rollover of the first collision counter */ #define MAC_TX_DEFER_TIMER 0x0080 /* rollover of the defer timer */ #define MAC_TX_PEAK_ATTEMPTS 0x0100 /* rollover of the peak attempts counter */ #define REG_MAC_RX_STATUS 0x6014 /* RX MAC status reg */ #define MAC_RX_FRAME_RECV 0x0001 /* successful receipt of a frame */ #define MAC_RX_OVERFLOW 0x0002 /* dropped frame due to RX FIFO overflow */ #define MAC_RX_FRAME_COUNT 0x0004 /* rollover of receive frame counter */ #define MAC_RX_ALIGN_ERR 0x0008 /* rollover of alignment error counter */ #define MAC_RX_CRC_ERR 0x0010 /* rollover of crc error counter */ #define MAC_RX_LEN_ERR 0x0020 /* rollover of length error counter */ #define MAC_RX_VIOL_ERR 0x0040 /* rollover of code violation error */ /* DEFAULT: 0xXXXX0000 on reset */ #define REG_MAC_CTRL_STATUS 0x6018 /* MAC control status reg */ #define MAC_CTRL_PAUSE_RECEIVED 0x00000001 /* successful reception of a pause control frame */ #define MAC_CTRL_PAUSE_STATE 0x00000002 /* MAC has made a transition from "not paused" to "paused" */ #define MAC_CTRL_NOPAUSE_STATE 0x00000004 /* MAC has made a transition from "paused" to "not paused" */ #define MAC_CTRL_PAUSE_TIME_MASK 0xFFFF0000 /* value of pause time operand that was received in the last pause flow control frame */ /* layout identical to TX MAC[8:0] */ #define REG_MAC_TX_MASK 0x6020 /* TX MAC mask reg */ /* layout identical to RX MAC[6:0] */ #define REG_MAC_RX_MASK 0x6024 /* RX MAC mask reg */ /* layout identical to CTRL MAC[2:0] */ #define REG_MAC_CTRL_MASK 0x6028 /* MAC control mask reg */ /* to ensure proper operation, CFG_EN must be cleared to 0 and a delay * imposed before writes to other bits in the TX_MAC_CFG register or any of * the MAC parameters is performed. delay dependent upon time required to * transmit a maximum size frame (= MAC_FRAMESIZE_MAX*8/Mbps). e.g., * the delay for a 1518-byte frame on a 100Mbps network is 125us. * alternatively, just poll TX_CFG_EN until it reads back as 0. * NOTE: on half-duplex 1Gbps, TX_CFG_CARRIER_EXTEND and * RX_CFG_CARRIER_EXTEND should be set and the SLOT_TIME register should * be 0x200 (slot time of 512 bytes) */ #define REG_MAC_TX_CFG 0x6030 /* TX MAC config reg */ #define MAC_TX_CFG_EN 0x0001 /* enable TX MAC. 0 will force TXMAC state machine to remain in idle state or to transition to idle state on completion of an ongoing packet. */ #define MAC_TX_CFG_IGNORE_CARRIER 0x0002 /* disable CSMA/CD deferral process. set to 1 when full duplex and 0 when half duplex */ #define MAC_TX_CFG_IGNORE_COLL 0x0004 /* disable CSMA/CD backoff algorithm. set to 1 when full duplex and 0 when half duplex */ #define MAC_TX_CFG_IPG_EN 0x0008 /* enable extension of the Rx-to-TX IPG. after receiving a frame, TX MAC will reset its deferral process to carrier sense for the amount of time = IPG0 + IPG1 and commit to transmission for time specified in IPG2. when 0 or when xmitting frames back-to-pack (Tx-to-Tx IPG), TX MAC ignores IPG0 and will only use IPG1 for deferral time. IPG2 still used. */ #define MAC_TX_CFG_NEVER_GIVE_UP_EN 0x0010 /* TX MAC will not easily give up on frame xmission. if backoff algorithm reaches the ATTEMPT_LIMIT, it will clear attempts counter and continue trying to send the frame as specified by GIVE_UP_LIM. when 0, TX MAC will execute standard CSMA/CD prot. */ #define MAC_TX_CFG_NEVER_GIVE_UP_LIM 0x0020 /* when set, TX MAC will continue to try to xmit until successful. when 0, TX MAC will continue to try xmitting until successful or backoff algorithm reaches ATTEMPT_LIMIT*16 */ #define MAC_TX_CFG_NO_BACKOFF 0x0040 /* modify CSMA/CD to disable backoff algorithm. TX MAC will not back off after a xmission attempt that resulted in a collision. */ #define MAC_TX_CFG_SLOW_DOWN 0x0080 /* modify CSMA/CD so that deferral process is reset in response to carrier sense during the entire duration of IPG. TX MAC will only commit to frame xmission after frame xmission has actually begun. */ #define MAC_TX_CFG_NO_FCS 0x0100 /* TX MAC will not generate CRC for all xmitted packets. when clear, CRC generation is dependent upon NO_CRC bit in the xmit control word from TX DMA */ #define MAC_TX_CFG_CARRIER_EXTEND 0x0200 /* enables xmit part of the carrier extension feature. this allows for longer collision domains by extending the carrier and collision window from the end of FCS until the end of the slot time if necessary. Required for half-duplex at 1Gbps, clear otherwise. */ /* when CRC is not stripped, reassembly packets will not contain the CRC. * these will be stripped by HRP because it reassembles layer 4 data, and the * CRC is layer 2. however, non-reassembly packets will still contain the CRC * when passed to the host. to ensure proper operation, need to wait 3.2ms * after clearing RX_CFG_EN before writing to any other RX MAC registers * or other MAC parameters. alternatively, poll RX_CFG_EN until it clears * to 0. similary, HASH_FILTER_EN and ADDR_FILTER_EN have the same * restrictions as CFG_EN. */ #define REG_MAC_RX_CFG 0x6034 /* RX MAC config reg */ #define MAC_RX_CFG_EN 0x0001 /* enable RX MAC */ #define MAC_RX_CFG_STRIP_PAD 0x0002 /* always program to 0. feature not supported */ #define MAC_RX_CFG_STRIP_FCS 0x0004 /* RX MAC will strip the last 4 bytes of a received frame. */ #define MAC_RX_CFG_PROMISC_EN 0x0008 /* promiscuous mode */ #define MAC_RX_CFG_PROMISC_GROUP_EN 0x0010 /* accept all valid multicast frames (group bit in DA field set) */ #define MAC_RX_CFG_HASH_FILTER_EN 0x0020 /* use hash table to filter multicast addresses */ #define MAC_RX_CFG_ADDR_FILTER_EN 0x0040 /* cause RX MAC to use address filtering regs to filter both unicast and multicast addresses */ #define MAC_RX_CFG_DISABLE_DISCARD 0x0080 /* pass errored frames to RX DMA by setting BAD bit but not Abort bit in the status. CRC, framing, and length errs will not increment error counters. frames which don't match dest addr will be passed up w/ BAD bit set. */ #define MAC_RX_CFG_CARRIER_EXTEND 0x0100 /* enable reception of packet bursts generated by carrier extension with packet bursting senders. only applies to half-duplex 1Gbps */ /* DEFAULT: 0x0 */ #define REG_MAC_CTRL_CFG 0x6038 /* MAC control config reg */ #define MAC_CTRL_CFG_SEND_PAUSE_EN 0x0001 /* respond to requests for sending pause flow ctrl frames */ #define MAC_CTRL_CFG_RECV_PAUSE_EN 0x0002 /* respond to received pause flow ctrl frames */ #define MAC_CTRL_CFG_PASS_CTRL 0x0004 /* pass valid MAC ctrl packets to RX DMA */ /* to ensure proper operation, a global initialization sequence should be * performed when a loopback config is entered or exited. if programmed after * a hw or global sw reset, RX/TX MAC software reset and initialization * should be done to ensure stable clocking. * DEFAULT: 0x0 */ #define REG_MAC_XIF_CFG 0x603C /* XIF config reg */ #define MAC_XIF_TX_MII_OUTPUT_EN 0x0001 /* enable output drivers on MII xmit bus */ #define MAC_XIF_MII_INT_LOOPBACK 0x0002 /* loopback GMII xmit data path to GMII recv data path. phy mode register clock selection must be set to GMII mode and GMII_MODE should be set to 1. in loopback mode, REFCLK will drive the entire mac core. 0 for normal operation. */ #define MAC_XIF_DISABLE_ECHO 0x0004 /* disables receive data path during packet xmission. clear to 0 in any full duplex mode, in any loopback mode, or in half-duplex SERDES or SLINK modes. set when in half-duplex when using external phy. */ #define MAC_XIF_GMII_MODE 0x0008 /* MAC operates with GMII clocks and datapath */ #define MAC_XIF_MII_BUFFER_OUTPUT_EN 0x0010 /* MII_BUF_EN pin. enable external tristate buffer on the MII receive bus. */ #define MAC_XIF_LINK_LED 0x0020 /* LINKLED# active (low) */ #define MAC_XIF_FDPLX_LED 0x0040 /* FDPLXLED# active (low) */ #define REG_MAC_IPG0 0x6040 /* inter-packet gap0 reg. recommended: 0x00 */ #define REG_MAC_IPG1 0x6044 /* inter-packet gap1 reg recommended: 0x08 */ #define REG_MAC_IPG2 0x6048 /* inter-packet gap2 reg recommended: 0x04 */ #define REG_MAC_SLOT_TIME 0x604C /* slot time reg recommended: 0x40 */ #define REG_MAC_FRAMESIZE_MIN 0x6050 /* min frame size reg recommended: 0x40 */ /* FRAMESIZE_MAX holds both the max frame size as well as the max burst size. * recommended value: 0x2000.05EE */ #define REG_MAC_FRAMESIZE_MAX 0x6054 /* max frame size reg */ #define MAC_FRAMESIZE_MAX_BURST_MASK 0x3FFF0000 /* max burst size */ #define MAC_FRAMESIZE_MAX_BURST_SHIFT 16 #define MAC_FRAMESIZE_MAX_FRAME_MASK 0x00007FFF /* max frame size */ #define MAC_FRAMESIZE_MAX_FRAME_SHIFT 0 #define REG_MAC_PA_SIZE 0x6058 /* PA size reg. number of preamble bytes that the TX MAC will xmit at the beginning of each frame value should be 2 or greater. recommended value: 0x07 */ #define REG_MAC_JAM_SIZE 0x605C /* jam size reg. duration of jam in units of media byte time. recommended value: 0x04 */ #define REG_MAC_ATTEMPT_LIMIT 0x6060 /* attempt limit reg. # of attempts TX MAC will make to xmit a frame before it resets its attempts counter. after the limit has been reached, TX MAC may or may not drop the frame dependent upon value in TX_MAC_CFG. recommended value: 0x10 */ #define REG_MAC_CTRL_TYPE 0x6064 /* MAC control type reg. type field of a MAC ctrl frame. recommended value: 0x8808 */ /* mac address registers: 0 - 44, 0x6080 - 0x6130, 4 8-bit bytes. * register contains comparison * 0 16 MSB of primary MAC addr [47:32] of DA field * 1 16 middle bits "" [31:16] of DA field * 2 16 LSB "" [15:0] of DA field * 3*x 16MSB of alt MAC addr 1-15 [47:32] of DA field * 4*x 16 middle bits "" [31:16] * 5*x 16 LSB "" [15:0] * 42 16 MSB of MAC CTRL addr [47:32] of DA. * 43 16 middle bits "" [31:16] * 44 16 LSB "" [15:0] * MAC CTRL addr must be the reserved multicast addr for MAC CTRL frames. * if there is a match, MAC will set the bit for alternative address * filter pass [15] * here is the map of registers given MAC address notation: a:b:c:d:e:f * ab cd ef * primary addr reg 2 reg 1 reg 0 * alt addr 1 reg 5 reg 4 reg 3 * alt addr x reg 5*x reg 4*x reg 3*x * ctrl addr reg 44 reg 43 reg 42 */ #define REG_MAC_ADDR0 0x6080 /* MAC address 0 reg */ #define REG_MAC_ADDRN(x) (REG_MAC_ADDR0 + (x)*4) #define REG_MAC_ADDR_FILTER0 0x614C /* address filter 0 reg [47:32] */ #define REG_MAC_ADDR_FILTER1 0x6150 /* address filter 1 reg [31:16] */ #define REG_MAC_ADDR_FILTER2 0x6154 /* address filter 2 reg [15:0] */ #define REG_MAC_ADDR_FILTER2_1_MASK 0x6158 /* address filter 2 and 1 mask reg. 8-bit reg contains nibble mask for reg 2 and 1. */ #define REG_MAC_ADDR_FILTER0_MASK 0x615C /* address filter 0 mask reg */ /* hash table registers: 0 - 15, 0x6160 - 0x619C, 4 8-bit bytes * 16-bit registers contain bits of the hash table. * reg x -> [16*(15 - x) + 15 : 16*(15 - x)]. * e.g., 15 -> [15:0], 0 -> [255:240] */ #define REG_MAC_HASH_TABLE0 0x6160 /* hash table 0 reg */ #define REG_MAC_HASH_TABLEN(x) (REG_MAC_HASH_TABLE0 + (x)*4) /* statistics registers. these registers generate an interrupt on * overflow. recommended initialization: 0x0000. most are 16-bits except * for PEAK_ATTEMPTS register which is 8 bits. */ #define REG_MAC_COLL_NORMAL 0x61A0 /* normal collision counter. */ #define REG_MAC_COLL_FIRST 0x61A4 /* first attempt successful collision counter */ #define REG_MAC_COLL_EXCESS 0x61A8 /* excessive collision counter */ #define REG_MAC_COLL_LATE 0x61AC /* late collision counter */ #define REG_MAC_TIMER_DEFER 0x61B0 /* defer timer. time base is the media byte clock/256 */ #define REG_MAC_ATTEMPTS_PEAK 0x61B4 /* peak attempts reg */ #define REG_MAC_RECV_FRAME 0x61B8 /* receive frame counter */ #define REG_MAC_LEN_ERR 0x61BC /* length error counter */ #define REG_MAC_ALIGN_ERR 0x61C0 /* alignment error counter */ #define REG_MAC_FCS_ERR 0x61C4 /* FCS error counter */ #define REG_MAC_RX_CODE_ERR 0x61C8 /* RX code violation error counter */ /* misc registers */ #define REG_MAC_RANDOM_SEED 0x61CC /* random number seed reg. 10-bit register used as a seed for the random number generator for the CSMA/CD backoff algorithm. only programmed after power-on reset and should be a random value which has a high likelihood of being unique for each MAC attached to a network segment (e.g., 10 LSB of MAC address) */ /* ASUN: there's a PAUSE_TIMER (ro) described, but it's not in the address * map */ /* 27-bit register has the current state for key state machines in the MAC */ #define REG_MAC_STATE_MACHINE 0x61D0 /* (ro) state machine reg */ #define MAC_SM_RLM_MASK 0x07800000 #define MAC_SM_RLM_SHIFT 23 #define MAC_SM_RX_FC_MASK 0x00700000 #define MAC_SM_RX_FC_SHIFT 20 #define MAC_SM_TLM_MASK 0x000F0000 #define MAC_SM_TLM_SHIFT 16 #define MAC_SM_ENCAP_SM_MASK 0x0000F000 #define MAC_SM_ENCAP_SM_SHIFT 12 #define MAC_SM_TX_REQ_MASK 0x00000C00 #define MAC_SM_TX_REQ_SHIFT 10 #define MAC_SM_TX_FC_MASK 0x000003C0 #define MAC_SM_TX_FC_SHIFT 6 #define MAC_SM_FIFO_WRITE_SEL_MASK 0x00000038 #define MAC_SM_FIFO_WRITE_SEL_SHIFT 3 #define MAC_SM_TX_FIFO_EMPTY_MASK 0x00000007 #define MAC_SM_TX_FIFO_EMPTY_SHIFT 0 /** MIF registers. the MIF can be programmed in either bit-bang or * frame mode. **/ #define REG_MIF_BIT_BANG_CLOCK 0x6200 /* MIF bit-bang clock. 1 -> 0 will generate a rising edge. 0 -> 1 will generate a falling edge. */ #define REG_MIF_BIT_BANG_DATA 0x6204 /* MIF bit-bang data. 1-bit register generates data */ #define REG_MIF_BIT_BANG_OUTPUT_EN 0x6208 /* MIF bit-bang output enable. enable when xmitting data from MIF to transceiver. */ /* 32-bit register serves as an instruction register when the MIF is * programmed in frame mode. load this register w/ a valid instruction * (as per IEEE 802.3u MII spec). poll this register to check for instruction * execution completion. during a read operation, this register will also * contain the 16-bit data returned by the tranceiver. unless specified * otherwise, fields are considered "don't care" when polling for * completion. */ #define REG_MIF_FRAME 0x620C /* MIF frame/output reg */ #define MIF_FRAME_START_MASK 0xC0000000 /* start of frame. load w/ 01 when issuing an instr */ #define MIF_FRAME_ST 0x40000000 /* STart of frame */ #define MIF_FRAME_OPCODE_MASK 0x30000000 /* opcode. 01 for a write. 10 for a read */ #define MIF_FRAME_OP_READ 0x20000000 /* read OPcode */ #define MIF_FRAME_OP_WRITE 0x10000000 /* write OPcode */ #define MIF_FRAME_PHY_ADDR_MASK 0x0F800000 /* phy address. when issuing an instr, this field should be loaded w/ the XCVR addr */ #define MIF_FRAME_PHY_ADDR_SHIFT 23 #define MIF_FRAME_REG_ADDR_MASK 0x007C0000 /* register address. when issuing an instr, addr of register to be read/written */ #define MIF_FRAME_REG_ADDR_SHIFT 18 #define MIF_FRAME_TURN_AROUND_MSB 0x00020000 /* turn around, MSB. when issuing an instr, set this bit to 1 */ #define MIF_FRAME_TURN_AROUND_LSB 0x00010000 /* turn around, LSB. when issuing an instr, set this bit to 0. when polling for completion, 1 means that instr execution has been completed */ #define MIF_FRAME_DATA_MASK 0x0000FFFF /* instruction payload load with 16-bit data to be written in transceiver reg for a write. doesn't matter in a read. when polling for completion, field is "don't care" for write and 16-bit data returned by the transceiver for a read (if valid bit is set) */ #define REG_MIF_CFG 0x6210 /* MIF config reg */ #define MIF_CFG_PHY_SELECT 0x0001 /* 1 -> select MDIO_1 0 -> select MDIO_0 */ #define MIF_CFG_POLL_EN 0x0002 /* enable polling mechanism. if set, BB_MODE should be 0 */ #define MIF_CFG_BB_MODE 0x0004 /* 1 -> bit-bang mode 0 -> frame mode */ #define MIF_CFG_POLL_REG_MASK 0x00F8 /* register address to be used by polling mode. only meaningful if POLL_EN is set to 1 */ #define MIF_CFG_POLL_REG_SHIFT 3 #define MIF_CFG_MDIO_0 0x0100 /* (ro) dual purpose. when MDIO_0 is idle, 1 -> tranceiver is connected to MDIO_0. when MIF is communicating w/ MDIO_0 in bit-bang mode, this bit indicates the incoming bit stream during a read op */ #define MIF_CFG_MDIO_1 0x0200 /* (ro) dual purpose. when MDIO_1 is idle, 1 -> transceiver is connected to MDIO_1. when MIF is communicating w/ MDIO_1 in bit-bang mode, this bit indicates the incoming bit stream during a read op */ #define MIF_CFG_POLL_PHY_MASK 0x7C00 /* tranceiver address to be polled */ #define MIF_CFG_POLL_PHY_SHIFT 10 /* 16-bit register used to determine which bits in the POLL_STATUS portion of * the MIF_STATUS register will cause an interrupt. if a mask bit is 0, * corresponding bit of the POLL_STATUS will generate a MIF interrupt when * set. DEFAULT: 0xFFFF */ #define REG_MIF_MASK 0x6214 /* MIF mask reg */ /* 32-bit register used when in poll mode. auto-cleared after being read */ #define REG_MIF_STATUS 0x6218 /* MIF status reg */ #define MIF_STATUS_POLL_DATA_MASK 0xFFFF0000 /* poll data contains the "latest image" update of the XCVR reg being read */ #define MIF_STATUS_POLL_DATA_SHIFT 16 #define MIF_STATUS_POLL_STATUS_MASK 0x0000FFFF /* poll status indicates which bits in the POLL_DATA field have changed since the MIF_STATUS reg was last read */ #define MIF_STATUS_POLL_STATUS_SHIFT 0 /* 7-bit register has current state for all state machines in the MIF */ #define REG_MIF_STATE_MACHINE 0x621C /* MIF state machine reg */ #define MIF_SM_CONTROL_MASK 0x07 /* control state machine state */ #define MIF_SM_EXECUTION_MASK 0x60 /* execution state machine state */ /** PCS/Serialink. the following registers are equivalent to the standard * MII management registers except that they're directly mapped in * Cassini's register space. **/ /* the auto-negotiation enable bit should be programmed the same at * the link partner as in the local device to enable auto-negotiation to * complete. when that bit is reprogrammed, auto-neg/manual config is * restarted automatically. * DEFAULT: 0x1040 */ #define REG_PCS_MII_CTRL 0x9000 /* PCS MII control reg */ #define PCS_MII_CTRL_1000_SEL 0x0040 /* reads 1. ignored on writes */ #define PCS_MII_CTRL_COLLISION_TEST 0x0080 /* COL signal at the PCS to MAC interface is activated regardless of activity */ #define PCS_MII_CTRL_DUPLEX 0x0100 /* forced 0x0. PCS behaviour same for half and full dplx */ #define PCS_MII_RESTART_AUTONEG 0x0200 /* self clearing. restart auto- negotiation */ #define PCS_MII_ISOLATE 0x0400 /* read as 0. ignored on writes */ #define PCS_MII_POWER_DOWN 0x0800 /* read as 0. ignored on writes */ #define PCS_MII_AUTONEG_EN 0x1000 /* default 1. PCS goes through automatic link config before it can be used. when 0, link can be used w/out any link config phase */ #define PCS_MII_10_100_SEL 0x2000 /* read as 0. ignored on writes */ #define PCS_MII_RESET 0x8000 /* reset PCS. self-clears when done */ /* DEFAULT: 0x0108 */ #define REG_PCS_MII_STATUS 0x9004 /* PCS MII status reg */ #define PCS_MII_STATUS_EXTEND_CAP 0x0001 /* reads 0 */ #define PCS_MII_STATUS_JABBER_DETECT 0x0002 /* reads 0 */ #define PCS_MII_STATUS_LINK_STATUS 0x0004 /* 1 -> link up. 0 -> link down. 0 is latched so that 0 is kept until read. read 2x to determine if the link has gone up again */ #define PCS_MII_STATUS_AUTONEG_ABLE 0x0008 /* reads 1 (able to perform auto-neg) */ #define PCS_MII_STATUS_REMOTE_FAULT 0x0010 /* 1 -> remote fault detected from received link code word. only valid after auto-neg completed */ #define PCS_MII_STATUS_AUTONEG_COMP 0x0020 /* 1 -> auto-negotiation completed 0 -> auto-negotiation not completed */ #define PCS_MII_STATUS_EXTEND_STATUS 0x0100 /* reads as 1. used as an indication that this is a 1000 Base-X PHY. writes to it are ignored */ /* used during auto-negotiation. * DEFAULT: 0x00E0 */ #define REG_PCS_MII_ADVERT 0x9008 /* PCS MII advertisement reg */ #define PCS_MII_ADVERT_FD 0x0020 /* advertise full duplex 1000 Base-X */ #define PCS_MII_ADVERT_HD 0x0040 /* advertise half-duplex 1000 Base-X */ #define PCS_MII_ADVERT_SYM_PAUSE 0x0080 /* advertise PAUSE symmetric capability */ #define PCS_MII_ADVERT_ASYM_PAUSE 0x0100 /* advertises PAUSE asymmetric capability */ #define PCS_MII_ADVERT_RF_MASK 0x3000 /* remote fault. write bit13 to optionally indicate to link partner that chip is going off-line. bit12 will get set when signal detect == FAIL and will remain set until successful negotiation */ #define PCS_MII_ADVERT_ACK 0x4000 /* (ro) */ #define PCS_MII_ADVERT_NEXT_PAGE 0x8000 /* (ro) forced 0x0 */ /* contents updated as a result of autonegotiation. layout and definitions * identical to PCS_MII_ADVERT */ #define REG_PCS_MII_LPA 0x900C /* PCS MII link partner ability reg */ #define PCS_MII_LPA_FD PCS_MII_ADVERT_FD #define PCS_MII_LPA_HD PCS_MII_ADVERT_HD #define PCS_MII_LPA_SYM_PAUSE PCS_MII_ADVERT_SYM_PAUSE #define PCS_MII_LPA_ASYM_PAUSE PCS_MII_ADVERT_ASYM_PAUSE #define PCS_MII_LPA_RF_MASK PCS_MII_ADVERT_RF_MASK #define PCS_MII_LPA_ACK PCS_MII_ADVERT_ACK #define PCS_MII_LPA_NEXT_PAGE PCS_MII_ADVERT_NEXT_PAGE /* DEFAULT: 0x0 */ #define REG_PCS_CFG 0x9010 /* PCS config reg */ #define PCS_CFG_EN 0x01 /* enable PCS. must be 0 when modifying PCS_MII_ADVERT */ #define PCS_CFG_SD_OVERRIDE 0x02 /* sets signal detect to OK. bit is non-resettable */ #define PCS_CFG_SD_ACTIVE_LOW 0x04 /* changes interpretation of optical signal to make signal detect okay when signal is low */ #define PCS_CFG_JITTER_STUDY_MASK 0x18 /* used to make jitter measurements. a single code group is xmitted regularly. 0x0 = normal operation 0x1 = high freq test pattern, D21.5 0x2 = low freq test pattern, K28.7 0x3 = reserved */ #define PCS_CFG_10MS_TIMER_OVERRIDE 0x20 /* shortens 10-20ms auto- negotiation timer to a few cycles for test purposes */ /* used for diagnostic purposes. bits 20-22 autoclear on read */ #define REG_PCS_STATE_MACHINE 0x9014 /* (ro) PCS state machine and diagnostic reg */ #define PCS_SM_TX_STATE_MASK 0x0000000F /* 0 and 1 indicate xmission of idle. otherwise, xmission of a packet */ #define PCS_SM_RX_STATE_MASK 0x000000F0 /* 0 indicates reception of idle. otherwise, reception of packet */ #define PCS_SM_WORD_SYNC_STATE_MASK 0x00000700 /* 0 indicates loss of sync */ #define PCS_SM_SEQ_DETECT_STATE_MASK 0x00001800 /* cycling through 0-3 indicates reception of Config codes. cycling through 0-1 indicates reception of idles */ #define PCS_SM_LINK_STATE_MASK 0x0001E000 #define SM_LINK_STATE_UP 0x00016000 /* link state is up */ #define PCS_SM_LOSS_LINK_C 0x00100000 /* loss of link due to recept of Config codes */ #define PCS_SM_LOSS_LINK_SYNC 0x00200000 /* loss of link due to loss of sync */ #define PCS_SM_LOSS_SIGNAL_DETECT 0x00400000 /* signal detect goes from OK to FAIL. bit29 will also be set if this is set */ #define PCS_SM_NO_LINK_BREAKLINK 0x01000000 /* link not up due to receipt of breaklink C codes from partner. C codes w/ 0 content received triggering start/restart of autonegotiation. should be sent for no longer than 20ms */ #define PCS_SM_NO_LINK_SERDES 0x02000000 /* serdes being initialized. see serdes state reg */ #define PCS_SM_NO_LINK_C 0x04000000 /* C codes not stable or not received */ #define PCS_SM_NO_LINK_SYNC 0x08000000 /* word sync not achieved */ #define PCS_SM_NO_LINK_WAIT_C 0x10000000 /* waiting for C codes w/ ack bit set */ #define PCS_SM_NO_LINK_NO_IDLE 0x20000000 /* link partner continues to send C codes instead of idle symbols or pkt data */ /* this register indicates interrupt changes in specific PCS MII status bits. * PCS_INT may be masked at the ISR level. only a single bit is implemented * for link status change. */ #define REG_PCS_INTR_STATUS 0x9018 /* PCS interrupt status */ #define PCS_INTR_STATUS_LINK_CHANGE 0x04 /* link status has changed since last read */ /* control which network interface is used. no more than one bit should * be set. * DEFAULT: none */ #define REG_PCS_DATAPATH_MODE 0x9050 /* datapath mode reg */ #define PCS_DATAPATH_MODE_MII 0x00 /* PCS is not used and MII/GMII is selected. selection between MII and GMII is controlled by XIF_CFG */ #define PCS_DATAPATH_MODE_SERDES 0x02 /* PCS is used via the 10-bit interface */ /* input to serdes chip or serialink block */ #define REG_PCS_SERDES_CTRL 0x9054 /* serdes control reg */ #define PCS_SERDES_CTRL_LOOPBACK 0x01 /* enable loopback on serdes interface */ #define PCS_SERDES_CTRL_SYNCD_EN 0x02 /* enable sync carrier detection. should be 0x0 for normal operation */ #define PCS_SERDES_CTRL_LOCKREF 0x04 /* frequency-lock RBC[0:1] to REFCLK when set. when clear, receiver clock locks to incoming serial data */ /* multiplex test outputs into the PROM address (PA_3 through PA_0) pins. * should be 0x0 for normal operations. * 0b000 normal operation, PROM address[3:0] selected * 0b001 rxdma req, rxdma ack, rxdma ready, rxdma read * 0b010 rxmac req, rx ack, rx tag, rx clk shared * 0b011 txmac req, tx ack, tx tag, tx retry req * 0b100 tx tp3, tx tp2, tx tp1, tx tp0 * 0b101 R period RX, R period TX, R period HP, R period BIM * DEFAULT: 0x0 */ #define REG_PCS_SHARED_OUTPUT_SEL 0x9058 /* shared output select */ #define PCS_SOS_PROM_ADDR_MASK 0x0007 /* used for diagnostics. this register indicates progress of the SERDES * boot up. * 0b00 undergoing reset * 0b01 waiting 500us while lockrefn is asserted * 0b10 waiting for comma detect * 0b11 receive data is synchronized * DEFAULT: 0x0 */ #define REG_PCS_SERDES_STATE 0x905C /* (ro) serdes state */ #define PCS_SERDES_STATE_MASK 0x03 /* used for diagnostics. indicates number of packets transmitted or received. * counters rollover w/out generating an interrupt. * DEFAULT: 0x0 */ #define REG_PCS_PACKET_COUNT 0x9060 /* (ro) PCS packet counter */ #define PCS_PACKET_COUNT_TX 0x000007FF /* pkts xmitted by PCS */ #define PCS_PACKET_COUNT_RX 0x07FF0000 /* pkts recvd by PCS whether they encountered an error or not */ /** LocalBus Devices. the following provides run-time access to the * Cassini's PROM ***/ #define REG_EXPANSION_ROM_RUN_START 0x100000 /* expansion rom run time access */ #define REG_EXPANSION_ROM_RUN_END 0x17FFFF #define REG_SECOND_LOCALBUS_START 0x180000 /* secondary local bus device */ #define REG_SECOND_LOCALBUS_END 0x1FFFFF /* entropy device */ #define REG_ENTROPY_START REG_SECOND_LOCALBUS_START #define REG_ENTROPY_DATA (REG_ENTROPY_START + 0x00) #define REG_ENTROPY_STATUS (REG_ENTROPY_START + 0x04) #define ENTROPY_STATUS_DRDY 0x01 #define ENTROPY_STATUS_BUSY 0x02 #define ENTROPY_STATUS_CIPHER 0x04 #define ENTROPY_STATUS_BYPASS_MASK 0x18 #define REG_ENTROPY_MODE (REG_ENTROPY_START + 0x05) #define ENTROPY_MODE_KEY_MASK 0x07 #define ENTROPY_MODE_ENCRYPT 0x40 #define REG_ENTROPY_RAND_REG (REG_ENTROPY_START + 0x06) #define REG_ENTROPY_RESET (REG_ENTROPY_START + 0x07) #define ENTROPY_RESET_DES_IO 0x01 #define ENTROPY_RESET_STC_MODE 0x02 #define ENTROPY_RESET_KEY_CACHE 0x04 #define ENTROPY_RESET_IV 0x08 #define REG_ENTROPY_IV (REG_ENTROPY_START + 0x08) #define REG_ENTROPY_KEY0 (REG_ENTROPY_START + 0x10) #define REG_ENTROPY_KEYN(x) (REG_ENTROPY_KEY0 + 4*(x)) /* phys of interest w/ their special mii registers */ #define PHY_LUCENT_B0 0x00437421 #define LUCENT_MII_REG 0x1F #define PHY_NS_DP83065 0x20005c78 #define DP83065_MII_MEM 0x16 #define DP83065_MII_REGD 0x1D #define DP83065_MII_REGE 0x1E #define PHY_BROADCOM_5411 0x00206071 #define PHY_BROADCOM_B0 0x00206050 #define BROADCOM_MII_REG4 0x14 #define BROADCOM_MII_REG5 0x15 #define BROADCOM_MII_REG7 0x17 #define BROADCOM_MII_REG8 0x18 #define CAS_MII_ANNPTR 0x07 #define CAS_MII_ANNPRR 0x08 #define CAS_MII_1000_CTRL 0x09 #define CAS_MII_1000_STATUS 0x0A #define CAS_MII_1000_EXTEND 0x0F #define CAS_BMSR_1000_EXTEND 0x0100 /* supports 1000Base-T extended status */ /* * if autoneg is disabled, here's the table: * BMCR_SPEED100 = 100Mbps * BMCR_SPEED1000 = 1000Mbps * ~(BMCR_SPEED100 | BMCR_SPEED1000) = 10Mbps */ #define CAS_BMCR_SPEED1000 0x0040 /* Select 1000Mbps */ #define CAS_ADVERTISE_1000HALF 0x0100 #define CAS_ADVERTISE_1000FULL 0x0200 #define CAS_ADVERTISE_PAUSE 0x0400 #define CAS_ADVERTISE_ASYM_PAUSE 0x0800 /* regular lpa register */ #define CAS_LPA_PAUSE CAS_ADVERTISE_PAUSE #define CAS_LPA_ASYM_PAUSE CAS_ADVERTISE_ASYM_PAUSE /* 1000_STATUS register */ #define CAS_LPA_1000HALF 0x0400 #define CAS_LPA_1000FULL 0x0800 #define CAS_EXTEND_1000XFULL 0x8000 #define CAS_EXTEND_1000XHALF 0x4000 #define CAS_EXTEND_1000TFULL 0x2000 #define CAS_EXTEND_1000THALF 0x1000 /* cassini header parser firmware */ typedef struct cas_hp_inst { const char *note; u16 mask, val; u8 op; u8 soff, snext; /* if match succeeds, new offset and match */ u8 foff, fnext; /* if match fails, new offset and match */ /* output info */ u8 outop; /* output opcode */ u16 outarg; /* output argument */ u8 outenab; /* output enable: 0 = not, 1 = if match 2 = if !match, 3 = always */ u8 outshift; /* barrel shift right, 4 bits */ u16 outmask; } cas_hp_inst_t; /* comparison */ #define OP_EQ 0 /* packet == value */ #define OP_LT 1 /* packet < value */ #define OP_GT 2 /* packet > value */ #define OP_NP 3 /* new packet */ /* output opcodes */ #define CL_REG 0 #define LD_FID 1 #define LD_SEQ 2 #define LD_CTL 3 #define LD_SAP 4 #define LD_R1 5 #define LD_L3 6 #define LD_SUM 7 #define LD_HDR 8 #define IM_FID 9 #define IM_SEQ 10 #define IM_SAP 11 #define IM_R1 12 #define IM_CTL 13 #define LD_LEN 14 #define ST_FLG 15 /* match setp #s for IP4TCP4 */ #define S1_PCKT 0 #define S1_VLAN 1 #define S1_CFI 2 #define S1_8023 3 #define S1_LLC 4 #define S1_LLCc 5 #define S1_IPV4 6 #define S1_IPV4c 7 #define S1_IPV4F 8 #define S1_TCP44 9 #define S1_IPV6 10 #define S1_IPV6L 11 #define S1_IPV6c 12 #define S1_TCP64 13 #define S1_TCPSQ 14 #define S1_TCPFG 15 #define S1_TCPHL 16 #define S1_TCPHc 17 #define S1_CLNP 18 #define S1_CLNP2 19 #define S1_DROP 20 #define S2_HTTP 21 #define S1_ESP4 22 #define S1_AH4 23 #define S1_ESP6 24 #define S1_AH6 25 #define CAS_PROG_IP46TCP4_PREAMBLE \ { "packet arrival?", 0xffff, 0x0000, OP_NP, 6, S1_VLAN, 0, S1_PCKT, \ CL_REG, 0x3ff, 1, 0x0, 0x0000}, \ { "VLAN?", 0xffff, 0x8100, OP_EQ, 1, S1_CFI, 0, S1_8023, \ IM_CTL, 0x00a, 3, 0x0, 0xffff}, \ { "CFI?", 0x1000, 0x1000, OP_EQ, 0, S1_DROP, 1, S1_8023, \ CL_REG, 0x000, 0, 0x0, 0x0000}, \ { "8023?", 0xffff, 0x0600, OP_LT, 1, S1_LLC, 0, S1_IPV4, \ CL_REG, 0x000, 0, 0x0, 0x0000}, \ { "LLC?", 0xffff, 0xaaaa, OP_EQ, 1, S1_LLCc, 0, S1_CLNP, \ CL_REG, 0x000, 0, 0x0, 0x0000}, \ { "LLCc?", 0xff00, 0x0300, OP_EQ, 2, S1_IPV4, 0, S1_CLNP, \ CL_REG, 0x000, 0, 0x0, 0x0000}, \ { "IPV4?", 0xffff, 0x0800, OP_EQ, 1, S1_IPV4c, 0, S1_IPV6, \ LD_SAP, 0x100, 3, 0x0, 0xffff}, \ { "IPV4 cont?", 0xff00, 0x4500, OP_EQ, 3, S1_IPV4F, 0, S1_CLNP, \ LD_SUM, 0x00a, 1, 0x0, 0x0000}, \ { "IPV4 frag?", 0x3fff, 0x0000, OP_EQ, 1, S1_TCP44, 0, S1_CLNP, \ LD_LEN, 0x03e, 1, 0x0, 0xffff}, \ { "TCP44?", 0x00ff, 0x0006, OP_EQ, 7, S1_TCPSQ, 0, S1_CLNP, \ LD_FID, 0x182, 1, 0x0, 0xffff}, /* FID IP4&TCP src+dst */ \ { "IPV6?", 0xffff, 0x86dd, OP_EQ, 1, S1_IPV6L, 0, S1_CLNP, \ LD_SUM, 0x015, 1, 0x0, 0x0000}, \ { "IPV6 len", 0xf000, 0x6000, OP_EQ, 0, S1_IPV6c, 0, S1_CLNP, \ IM_R1, 0x128, 1, 0x0, 0xffff}, \ { "IPV6 cont?", 0x0000, 0x0000, OP_EQ, 3, S1_TCP64, 0, S1_CLNP, \ LD_FID, 0x484, 1, 0x0, 0xffff}, /* FID IP6&TCP src+dst */ \ { "TCP64?", 0xff00, 0x0600, OP_EQ, 18, S1_TCPSQ, 0, S1_CLNP, \ LD_LEN, 0x03f, 1, 0x0, 0xffff} #ifdef USE_HP_IP46TCP4 static cas_hp_inst_t cas_prog_ip46tcp4tab[] = { CAS_PROG_IP46TCP4_PREAMBLE, { "TCP seq", /* DADDR should point to dest port */ 0x0000, 0x0000, OP_EQ, 0, S1_TCPFG, 4, S1_TCPFG, LD_SEQ, 0x081, 3, 0x0, 0xffff}, /* Load TCP seq # */ { "TCP control flags", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHL, 0, S1_TCPHL, ST_FLG, 0x045, 3, 0x0, 0x002f}, /* Load TCP flags */ { "TCP length", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHc, 0, S1_TCPHc, LD_R1, 0x205, 3, 0xB, 0xf000}, { "TCP length cont", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, LD_HDR, 0x0ff, 3, 0x0, 0xffff}, { "Cleanup", 0x0000, 0x0000, OP_EQ, 0, S1_CLNP2, 0, S1_CLNP2, IM_CTL, 0x001, 3, 0x0, 0x0001}, { "Cleanup 2", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, IM_CTL, 0x000, 0, 0x0, 0x0000}, { "Drop packet", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, IM_CTL, 0x080, 3, 0x0, 0xffff}, { NULL }, }; #ifdef HP_IP46TCP4_DEFAULT #define CAS_HP_FIRMWARE cas_prog_ip46tcp4tab #endif #endif /* * Alternate table load which excludes HTTP server traffic from reassembly. * It is substantially similar to the basic table, with one extra state * and a few extra compares. */ #ifdef USE_HP_IP46TCP4NOHTTP static cas_hp_inst_t cas_prog_ip46tcp4nohttptab[] = { CAS_PROG_IP46TCP4_PREAMBLE, { "TCP seq", /* DADDR should point to dest port */ 0xFFFF, 0x0080, OP_EQ, 0, S2_HTTP, 0, S1_TCPFG, LD_SEQ, 0x081, 3, 0x0, 0xffff} , /* Load TCP seq # */ { "TCP control flags", 0xFFFF, 0x8080, OP_EQ, 0, S2_HTTP, 0, S1_TCPHL, ST_FLG, 0x145, 2, 0x0, 0x002f, }, /* Load TCP flags */ { "TCP length", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHc, 0, S1_TCPHc, LD_R1, 0x205, 3, 0xB, 0xf000}, { "TCP length cont", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, LD_HDR, 0x0ff, 3, 0x0, 0xffff}, { "Cleanup", 0x0000, 0x0000, OP_EQ, 0, S1_CLNP2, 0, S1_CLNP2, IM_CTL, 0x001, 3, 0x0, 0x0001}, { "Cleanup 2", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, CL_REG, 0x002, 3, 0x0, 0x0000}, { "Drop packet", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, IM_CTL, 0x080, 3, 0x0, 0xffff}, { "No HTTP", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, IM_CTL, 0x044, 3, 0x0, 0xffff}, { NULL }, }; #ifdef HP_IP46TCP4NOHTTP_DEFAULT #define CAS_HP_FIRMWARE cas_prog_ip46tcp4nohttptab #endif #endif /* match step #s for IP4FRAG */ #define S3_IPV6c 11 #define S3_TCP64 12 #define S3_TCPSQ 13 #define S3_TCPFG 14 #define S3_TCPHL 15 #define S3_TCPHc 16 #define S3_FRAG 17 #define S3_FOFF 18 #define S3_CLNP 19 #ifdef USE_HP_IP4FRAG static cas_hp_inst_t cas_prog_ip4fragtab[] = { { "packet arrival?", 0xffff, 0x0000, OP_NP, 6, S1_VLAN, 0, S1_PCKT, CL_REG, 0x3ff, 1, 0x0, 0x0000}, { "VLAN?", 0xffff, 0x8100, OP_EQ, 1, S1_CFI, 0, S1_8023, IM_CTL, 0x00a, 3, 0x0, 0xffff}, { "CFI?", 0x1000, 0x1000, OP_EQ, 0, S3_CLNP, 1, S1_8023, CL_REG, 0x000, 0, 0x0, 0x0000}, { "8023?", 0xffff, 0x0600, OP_LT, 1, S1_LLC, 0, S1_IPV4, CL_REG, 0x000, 0, 0x0, 0x0000}, { "LLC?", 0xffff, 0xaaaa, OP_EQ, 1, S1_LLCc, 0, S3_CLNP, CL_REG, 0x000, 0, 0x0, 0x0000}, { "LLCc?",0xff00, 0x0300, OP_EQ, 2, S1_IPV4, 0, S3_CLNP, CL_REG, 0x000, 0, 0x0, 0x0000}, { "IPV4?", 0xffff, 0x0800, OP_EQ, 1, S1_IPV4c, 0, S1_IPV6, LD_SAP, 0x100, 3, 0x0, 0xffff}, { "IPV4 cont?", 0xff00, 0x4500, OP_EQ, 3, S1_IPV4F, 0, S3_CLNP, LD_SUM, 0x00a, 1, 0x0, 0x0000}, { "IPV4 frag?", 0x3fff, 0x0000, OP_EQ, 1, S1_TCP44, 0, S3_FRAG, LD_LEN, 0x03e, 3, 0x0, 0xffff}, { "TCP44?", 0x00ff, 0x0006, OP_EQ, 7, S3_TCPSQ, 0, S3_CLNP, LD_FID, 0x182, 3, 0x0, 0xffff}, /* FID IP4&TCP src+dst */ { "IPV6?", 0xffff, 0x86dd, OP_EQ, 1, S3_IPV6c, 0, S3_CLNP, LD_SUM, 0x015, 1, 0x0, 0x0000}, { "IPV6 cont?", 0xf000, 0x6000, OP_EQ, 3, S3_TCP64, 0, S3_CLNP, LD_FID, 0x484, 1, 0x0, 0xffff}, /* FID IP6&TCP src+dst */ { "TCP64?", 0xff00, 0x0600, OP_EQ, 18, S3_TCPSQ, 0, S3_CLNP, LD_LEN, 0x03f, 1, 0x0, 0xffff}, { "TCP seq", /* DADDR should point to dest port */ 0x0000, 0x0000, OP_EQ, 0, S3_TCPFG, 4, S3_TCPFG, LD_SEQ, 0x081, 3, 0x0, 0xffff}, /* Load TCP seq # */ { "TCP control flags", 0x0000, 0x0000, OP_EQ, 0, S3_TCPHL, 0, S3_TCPHL, ST_FLG, 0x045, 3, 0x0, 0x002f}, /* Load TCP flags */ { "TCP length", 0x0000, 0x0000, OP_EQ, 0, S3_TCPHc, 0, S3_TCPHc, LD_R1, 0x205, 3, 0xB, 0xf000}, { "TCP length cont", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, LD_HDR, 0x0ff, 3, 0x0, 0xffff}, { "IP4 Fragment", 0x0000, 0x0000, OP_EQ, 0, S3_FOFF, 0, S3_FOFF, LD_FID, 0x103, 3, 0x0, 0xffff}, /* FID IP4 src+dst */ { "IP4 frag offset", 0x0000, 0x0000, OP_EQ, 0, S3_FOFF, 0, S3_FOFF, LD_SEQ, 0x040, 1, 0xD, 0xfff8}, { "Cleanup", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, IM_CTL, 0x001, 3, 0x0, 0x0001}, { NULL }, }; #ifdef HP_IP4FRAG_DEFAULT #define CAS_HP_FIRMWARE cas_prog_ip4fragtab #endif #endif /* * Alternate table which does batching without reassembly */ #ifdef USE_HP_IP46TCP4BATCH static cas_hp_inst_t cas_prog_ip46tcp4batchtab[] = { CAS_PROG_IP46TCP4_PREAMBLE, { "TCP seq", /* DADDR should point to dest port */ 0x0000, 0x0000, OP_EQ, 0, S1_TCPFG, 0, S1_TCPFG, LD_SEQ, 0x081, 3, 0x0, 0xffff}, /* Load TCP seq # */ { "TCP control flags", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHL, 0, S1_TCPHL, ST_FLG, 0x000, 3, 0x0, 0x0000}, /* Load TCP flags */ { "TCP length", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHc, 0, S1_TCPHc, LD_R1, 0x205, 3, 0xB, 0xf000}, { "TCP length cont", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, IM_CTL, 0x040, 3, 0x0, 0xffff}, /* set batch bit */ { "Cleanup", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, IM_CTL, 0x001, 3, 0x0, 0x0001}, { "Drop packet", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, IM_CTL, 0x080, 3, 0x0, 0xffff}, { NULL }, }; #ifdef HP_IP46TCP4BATCH_DEFAULT #define CAS_HP_FIRMWARE cas_prog_ip46tcp4batchtab #endif #endif /* Workaround for Cassini rev2 descriptor corruption problem. * Does batching without reassembly, and sets the SAP to a known * data pattern for all packets. */ #ifdef USE_HP_WORKAROUND static cas_hp_inst_t cas_prog_workaroundtab[] = { { "packet arrival?", 0xffff, 0x0000, OP_NP, 6, S1_VLAN, 0, S1_PCKT, CL_REG, 0x3ff, 1, 0x0, 0x0000} , { "VLAN?", 0xffff, 0x8100, OP_EQ, 1, S1_CFI, 0, S1_8023, IM_CTL, 0x04a, 3, 0x0, 0xffff}, { "CFI?", 0x1000, 0x1000, OP_EQ, 0, S1_CLNP, 1, S1_8023, CL_REG, 0x000, 0, 0x0, 0x0000}, { "8023?", 0xffff, 0x0600, OP_LT, 1, S1_LLC, 0, S1_IPV4, CL_REG, 0x000, 0, 0x0, 0x0000}, { "LLC?", 0xffff, 0xaaaa, OP_EQ, 1, S1_LLCc, 0, S1_CLNP, CL_REG, 0x000, 0, 0x0, 0x0000}, { "LLCc?", 0xff00, 0x0300, OP_EQ, 2, S1_IPV4, 0, S1_CLNP, CL_REG, 0x000, 0, 0x0, 0x0000}, { "IPV4?", 0xffff, 0x0800, OP_EQ, 1, S1_IPV4c, 0, S1_IPV6, IM_SAP, 0x6AE, 3, 0x0, 0xffff}, { "IPV4 cont?", 0xff00, 0x4500, OP_EQ, 3, S1_IPV4F, 0, S1_CLNP, LD_SUM, 0x00a, 1, 0x0, 0x0000}, { "IPV4 frag?", 0x3fff, 0x0000, OP_EQ, 1, S1_TCP44, 0, S1_CLNP, LD_LEN, 0x03e, 1, 0x0, 0xffff}, { "TCP44?", 0x00ff, 0x0006, OP_EQ, 7, S1_TCPSQ, 0, S1_CLNP, LD_FID, 0x182, 3, 0x0, 0xffff}, /* FID IP4&TCP src+dst */ { "IPV6?", 0xffff, 0x86dd, OP_EQ, 1, S1_IPV6L, 0, S1_CLNP, LD_SUM, 0x015, 1, 0x0, 0x0000}, { "IPV6 len", 0xf000, 0x6000, OP_EQ, 0, S1_IPV6c, 0, S1_CLNP, IM_R1, 0x128, 1, 0x0, 0xffff}, { "IPV6 cont?", 0x0000, 0x0000, OP_EQ, 3, S1_TCP64, 0, S1_CLNP, LD_FID, 0x484, 1, 0x0, 0xffff}, /* FID IP6&TCP src+dst */ { "TCP64?", 0xff00, 0x0600, OP_EQ, 18, S1_TCPSQ, 0, S1_CLNP, LD_LEN, 0x03f, 1, 0x0, 0xffff}, { "TCP seq", /* DADDR should point to dest port */ 0x0000, 0x0000, OP_EQ, 0, S1_TCPFG, 4, S1_TCPFG, LD_SEQ, 0x081, 3, 0x0, 0xffff}, /* Load TCP seq # */ { "TCP control flags", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHL, 0, S1_TCPHL, ST_FLG, 0x045, 3, 0x0, 0x002f}, /* Load TCP flags */ { "TCP length", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHc, 0, S1_TCPHc, LD_R1, 0x205, 3, 0xB, 0xf000}, { "TCP length cont", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, LD_HDR, 0x0ff, 3, 0x0, 0xffff}, { "Cleanup", 0x0000, 0x0000, OP_EQ, 0, S1_CLNP2, 0, S1_CLNP2, IM_SAP, 0x6AE, 3, 0x0, 0xffff} , { "Cleanup 2", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, IM_CTL, 0x001, 3, 0x0, 0x0001}, { NULL }, }; #ifdef HP_WORKAROUND_DEFAULT #define CAS_HP_FIRMWARE cas_prog_workaroundtab #endif #endif #ifdef USE_HP_ENCRYPT static cas_hp_inst_t cas_prog_encryptiontab[] = { { "packet arrival?", 0xffff, 0x0000, OP_NP, 6, S1_VLAN, 0, S1_PCKT, CL_REG, 0x3ff, 1, 0x0, 0x0000}, { "VLAN?", 0xffff, 0x8100, OP_EQ, 1, S1_CFI, 0, S1_8023, IM_CTL, 0x00a, 3, 0x0, 0xffff}, #if 0 //"CFI?", /* 02 FIND CFI and If FIND go to S1_DROP */ //0x1000, 0x1000, OP_EQ, 0, S1_DROP, 1, S1_8023, CL_REG, 0x000, 0, 0x0, 0x00 00, #endif { "CFI?", /* FIND CFI and If FIND go to CleanUP1 (ignore and send to host) */ 0x1000, 0x1000, OP_EQ, 0, S1_CLNP, 1, S1_8023, CL_REG, 0x000, 0, 0x0, 0x0000}, { "8023?", 0xffff, 0x0600, OP_LT, 1, S1_LLC, 0, S1_IPV4, CL_REG, 0x000, 0, 0x0, 0x0000}, { "LLC?", 0xffff, 0xaaaa, OP_EQ, 1, S1_LLCc, 0, S1_CLNP, CL_REG, 0x000, 0, 0x0, 0x0000}, { "LLCc?", 0xff00, 0x0300, OP_EQ, 2, S1_IPV4, 0, S1_CLNP, CL_REG, 0x000, 0, 0x0, 0x0000}, { "IPV4?", 0xffff, 0x0800, OP_EQ, 1, S1_IPV4c, 0, S1_IPV6, LD_SAP, 0x100, 3, 0x0, 0xffff}, { "IPV4 cont?", 0xff00, 0x4500, OP_EQ, 3, S1_IPV4F, 0, S1_CLNP, LD_SUM, 0x00a, 1, 0x0, 0x0000}, { "IPV4 frag?", 0x3fff, 0x0000, OP_EQ, 1, S1_TCP44, 0, S1_CLNP, LD_LEN, 0x03e, 1, 0x0, 0xffff}, { "TCP44?", 0x00ff, 0x0006, OP_EQ, 7, S1_TCPSQ, 0, S1_ESP4, LD_FID, 0x182, 1, 0x0, 0xffff}, /* FID IP4&TCP src+dst */ { "IPV6?", 0xffff, 0x86dd, OP_EQ, 1, S1_IPV6L, 0, S1_CLNP, LD_SUM, 0x015, 1, 0x0, 0x0000}, { "IPV6 len", 0xf000, 0x6000, OP_EQ, 0, S1_IPV6c, 0, S1_CLNP, IM_R1, 0x128, 1, 0x0, 0xffff}, { "IPV6 cont?", 0x0000, 0x0000, OP_EQ, 3, S1_TCP64, 0, S1_CLNP, LD_FID, 0x484, 1, 0x0, 0xffff}, /* FID IP6&TCP src+dst */ { "TCP64?", #if 0 //@@@0xff00, 0x0600, OP_EQ, 18, S1_TCPSQ, 0, S1_ESP6, LD_LEN, 0x03f, 1, 0x0, 0xffff, #endif 0xff00, 0x0600, OP_EQ, 12, S1_TCPSQ, 0, S1_ESP6, LD_LEN, 0x03f, 1, 0x0, 0xffff}, { "TCP seq", /* 14:DADDR should point to dest port */ 0xFFFF, 0x0080, OP_EQ, 0, S2_HTTP, 0, S1_TCPFG, LD_SEQ, 0x081, 3, 0x0, 0xffff}, /* Load TCP seq # */ { "TCP control flags", 0xFFFF, 0x8080, OP_EQ, 0, S2_HTTP, 0, S1_TCPHL, ST_FLG, 0x145, 2, 0x0, 0x002f}, /* Load TCP flags */ { "TCP length", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHc, 0, S1_TCPHc, LD_R1, 0x205, 3, 0xB, 0xf000} , { "TCP length cont", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, LD_HDR, 0x0ff, 3, 0x0, 0xffff}, { "Cleanup", 0x0000, 0x0000, OP_EQ, 0, S1_CLNP2, 0, S1_CLNP2, IM_CTL, 0x001, 3, 0x0, 0x0001}, { "Cleanup 2", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, CL_REG, 0x002, 3, 0x0, 0x0000}, { "Drop packet", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, IM_CTL, 0x080, 3, 0x0, 0xffff}, { "No HTTP", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT, IM_CTL, 0x044, 3, 0x0, 0xffff}, { "IPV4 ESP encrypted?", /* S1_ESP4 */ 0x00ff, 0x0032, OP_EQ, 0, S1_CLNP2, 0, S1_AH4, IM_CTL, 0x021, 1, 0x0, 0xffff}, { "IPV4 AH encrypted?", /* S1_AH4 */ 0x00ff, 0x0033, OP_EQ, 0, S1_CLNP2, 0, S1_CLNP, IM_CTL, 0x021, 1, 0x0, 0xffff}, { "IPV6 ESP encrypted?", /* S1_ESP6 */ #if 0 //@@@0x00ff, 0x0032, OP_EQ, 0, S1_CLNP2, 0, S1_AH6, IM_CTL, 0x021, 1, 0x0, 0xffff, #endif 0xff00, 0x3200, OP_EQ, 0, S1_CLNP2, 0, S1_AH6, IM_CTL, 0x021, 1, 0x0, 0xffff}, { "IPV6 AH encrypted?", /* S1_AH6 */ #if 0 //@@@0x00ff, 0x0033, OP_EQ, 0, S1_CLNP2, 0, S1_CLNP, IM_CTL, 0x021, 1, 0x0, 0xffff, #endif 0xff00, 0x3300, OP_EQ, 0, S1_CLNP2, 0, S1_CLNP, IM_CTL, 0x021, 1, 0x0, 0xffff}, { NULL }, }; #ifdef HP_ENCRYPT_DEFAULT #define CAS_HP_FIRMWARE cas_prog_encryptiontab #endif #endif static cas_hp_inst_t cas_prog_null[] = { {NULL} }; #ifdef HP_NULL_DEFAULT #define CAS_HP_FIRMWARE cas_prog_null #endif /* phy types */ #define CAS_PHY_UNKNOWN 0x00 #define CAS_PHY_SERDES 0x01 #define CAS_PHY_MII_MDIO0 0x02 #define CAS_PHY_MII_MDIO1 0x04 #define CAS_PHY_MII(x) ((x) & (CAS_PHY_MII_MDIO0 | CAS_PHY_MII_MDIO1)) /* _RING_INDEX is the index for the ring sizes to be used. _RING_SIZE * is the actual size. the default index for the various rings is * 8. NOTE: there a bunch of alignment constraints for the rings. to * deal with that, i just allocate rings to create the desired * alignment. here are the constraints: * RX DESC and COMP rings must be 8KB aligned * TX DESC must be 2KB aligned. * if you change the numbers, be cognizant of how the alignment will change * in INIT_BLOCK as well. */ #define DESC_RING_I_TO_S(x) (32*(1 << (x))) #define COMP_RING_I_TO_S(x) (128*(1 << (x))) #define TX_DESC_RING_INDEX 4 /* 512 = 8k */ #define RX_DESC_RING_INDEX 4 /* 512 = 8k */ #define RX_COMP_RING_INDEX 4 /* 2048 = 64k: should be 4x rx ring size */ #if (TX_DESC_RING_INDEX > 8) || (TX_DESC_RING_INDEX < 0) #error TX_DESC_RING_INDEX must be between 0 and 8 #endif #if (RX_DESC_RING_INDEX > 8) || (RX_DESC_RING_INDEX < 0) #error RX_DESC_RING_INDEX must be between 0 and 8 #endif #if (RX_COMP_RING_INDEX > 8) || (RX_COMP_RING_INDEX < 0) #error RX_COMP_RING_INDEX must be between 0 and 8 #endif #define N_TX_RINGS MAX_TX_RINGS /* for QoS */ #define N_TX_RINGS_MASK MAX_TX_RINGS_MASK #define N_RX_DESC_RINGS MAX_RX_DESC_RINGS /* 1 for ipsec */ #define N_RX_COMP_RINGS 0x1 /* for mult. PCI interrupts */ /* number of flows that can go through re-assembly */ #define N_RX_FLOWS 64 #define TX_DESC_RING_SIZE DESC_RING_I_TO_S(TX_DESC_RING_INDEX) #define RX_DESC_RING_SIZE DESC_RING_I_TO_S(RX_DESC_RING_INDEX) #define RX_COMP_RING_SIZE COMP_RING_I_TO_S(RX_COMP_RING_INDEX) #define TX_DESC_RINGN_INDEX(x) TX_DESC_RING_INDEX #define RX_DESC_RINGN_INDEX(x) RX_DESC_RING_INDEX #define RX_COMP_RINGN_INDEX(x) RX_COMP_RING_INDEX #define TX_DESC_RINGN_SIZE(x) TX_DESC_RING_SIZE #define RX_DESC_RINGN_SIZE(x) RX_DESC_RING_SIZE #define RX_COMP_RINGN_SIZE(x) RX_COMP_RING_SIZE /* convert values */ #define CAS_BASE(x, y) (((y) << (x ## _SHIFT)) & (x ## _MASK)) #define CAS_VAL(x, y) (((y) & (x ## _MASK)) >> (x ## _SHIFT)) #define CAS_TX_RINGN_BASE(y) ((TX_DESC_RINGN_INDEX(y) << \ TX_CFG_DESC_RINGN_SHIFT(y)) & \ TX_CFG_DESC_RINGN_MASK(y)) /* min is 2k, but we can't do jumbo frames unless it's at least 8k */ #define CAS_MIN_PAGE_SHIFT 11 /* 2048 */ #define CAS_JUMBO_PAGE_SHIFT 13 /* 8192 */ #define CAS_MAX_PAGE_SHIFT 14 /* 16384 */ #define TX_DESC_BUFLEN_MASK 0x0000000000003FFFULL /* buffer length in bytes. 0 - 9256 */ #define TX_DESC_BUFLEN_SHIFT 0 #define TX_DESC_CSUM_START_MASK 0x00000000001F8000ULL /* checksum start. # of bytes to be skipped before csum calc begins. value must be even */ #define TX_DESC_CSUM_START_SHIFT 15 #define TX_DESC_CSUM_STUFF_MASK 0x000000001FE00000ULL /* checksum stuff. byte offset w/in the pkt for the 1st csum byte. must be > 8 */ #define TX_DESC_CSUM_STUFF_SHIFT 21 #define TX_DESC_CSUM_EN 0x0000000020000000ULL /* enable checksum */ #define TX_DESC_EOF 0x0000000040000000ULL /* end of frame */ #define TX_DESC_SOF 0x0000000080000000ULL /* start of frame */ #define TX_DESC_INTME 0x0000000100000000ULL /* interrupt me */ #define TX_DESC_NO_CRC 0x0000000200000000ULL /* debugging only. CRC will not be inserted into outgoing frame. */ struct cas_tx_desc { __le64 control; __le64 buffer; }; /* descriptor ring for free buffers contains page-sized buffers. the index * value is not used by the hw in any way. it's just stored and returned in * the completion ring. */ struct cas_rx_desc { __le64 index; __le64 buffer; }; /* received packets are put on the completion ring. */ /* word 1 */ #define RX_COMP1_DATA_SIZE_MASK 0x0000000007FFE000ULL #define RX_COMP1_DATA_SIZE_SHIFT 13 #define RX_COMP1_DATA_OFF_MASK 0x000001FFF8000000ULL #define RX_COMP1_DATA_OFF_SHIFT 27 #define RX_COMP1_DATA_INDEX_MASK 0x007FFE0000000000ULL #define RX_COMP1_DATA_INDEX_SHIFT 41 #define RX_COMP1_SKIP_MASK 0x0180000000000000ULL #define RX_COMP1_SKIP_SHIFT 55 #define RX_COMP1_RELEASE_NEXT 0x0200000000000000ULL #define RX_COMP1_SPLIT_PKT 0x0400000000000000ULL #define RX_COMP1_RELEASE_FLOW 0x0800000000000000ULL #define RX_COMP1_RELEASE_DATA 0x1000000000000000ULL #define RX_COMP1_RELEASE_HDR 0x2000000000000000ULL #define RX_COMP1_TYPE_MASK 0xC000000000000000ULL #define RX_COMP1_TYPE_SHIFT 62 /* word 2 */ #define RX_COMP2_NEXT_INDEX_MASK 0x00000007FFE00000ULL #define RX_COMP2_NEXT_INDEX_SHIFT 21 #define RX_COMP2_HDR_SIZE_MASK 0x00000FF800000000ULL #define RX_COMP2_HDR_SIZE_SHIFT 35 #define RX_COMP2_HDR_OFF_MASK 0x0003F00000000000ULL #define RX_COMP2_HDR_OFF_SHIFT 44 #define RX_COMP2_HDR_INDEX_MASK 0xFFFC000000000000ULL #define RX_COMP2_HDR_INDEX_SHIFT 50 /* word 3 */ #define RX_COMP3_SMALL_PKT 0x0000000000000001ULL #define RX_COMP3_JUMBO_PKT 0x0000000000000002ULL #define RX_COMP3_JUMBO_HDR_SPLIT_EN 0x0000000000000004ULL #define RX_COMP3_CSUM_START_MASK 0x000000000007F000ULL #define RX_COMP3_CSUM_START_SHIFT 12 #define RX_COMP3_FLOWID_MASK 0x0000000001F80000ULL #define RX_COMP3_FLOWID_SHIFT 19 #define RX_COMP3_OPCODE_MASK 0x000000000E000000ULL #define RX_COMP3_OPCODE_SHIFT 25 #define RX_COMP3_FORCE_FLAG 0x0000000010000000ULL #define RX_COMP3_NO_ASSIST 0x0000000020000000ULL #define RX_COMP3_LOAD_BAL_MASK 0x000001F800000000ULL #define RX_COMP3_LOAD_BAL_SHIFT 35 #define RX_PLUS_COMP3_ENC_PKT 0x0000020000000000ULL /* cas+ */ #define RX_COMP3_L3_HEAD_OFF_MASK 0x0000FE0000000000ULL /* cas */ #define RX_COMP3_L3_HEAD_OFF_SHIFT 41 #define RX_PLUS_COMP_L3_HEAD_OFF_MASK 0x0000FC0000000000ULL /* cas+ */ #define RX_PLUS_COMP_L3_HEAD_OFF_SHIFT 42 #define RX_COMP3_SAP_MASK 0xFFFF000000000000ULL #define RX_COMP3_SAP_SHIFT 48 /* word 4 */ #define RX_COMP4_TCP_CSUM_MASK 0x000000000000FFFFULL #define RX_COMP4_TCP_CSUM_SHIFT 0 #define RX_COMP4_PKT_LEN_MASK 0x000000003FFF0000ULL #define RX_COMP4_PKT_LEN_SHIFT 16 #define RX_COMP4_PERFECT_MATCH_MASK 0x00000003C0000000ULL #define RX_COMP4_PERFECT_MATCH_SHIFT 30 #define RX_COMP4_ZERO 0x0000080000000000ULL #define RX_COMP4_HASH_VAL_MASK 0x0FFFF00000000000ULL #define RX_COMP4_HASH_VAL_SHIFT 44 #define RX_COMP4_HASH_PASS 0x1000000000000000ULL #define RX_COMP4_BAD 0x4000000000000000ULL #define RX_COMP4_LEN_MISMATCH 0x8000000000000000ULL /* we encode the following: ring/index/release. only 14 bits * are usable. * NOTE: the encoding is dependent upon RX_DESC_RING_SIZE and * MAX_RX_DESC_RINGS. */ #define RX_INDEX_NUM_MASK 0x0000000000000FFFULL #define RX_INDEX_NUM_SHIFT 0 #define RX_INDEX_RING_MASK 0x0000000000001000ULL #define RX_INDEX_RING_SHIFT 12 #define RX_INDEX_RELEASE 0x0000000000002000ULL struct cas_rx_comp { __le64 word1; __le64 word2; __le64 word3; __le64 word4; }; enum link_state { link_down = 0, /* No link, will retry */ link_aneg, /* Autoneg in progress */ link_force_try, /* Try Forced link speed */ link_force_ret, /* Forced mode worked, retrying autoneg */ link_force_ok, /* Stay in forced mode */ link_up /* Link is up */ }; typedef struct cas_page { struct list_head list; struct page *buffer; dma_addr_t dma_addr; int used; } cas_page_t; /* some alignment constraints: * TX DESC, RX DESC, and RX COMP must each be 8K aligned. * TX COMPWB must be 8-byte aligned. * to accomplish this, here's what we do: * * INIT_BLOCK_RX_COMP = 64k (already aligned) * INIT_BLOCK_RX_DESC = 8k * INIT_BLOCK_TX = 8k * INIT_BLOCK_RX1_DESC = 8k * TX COMPWB */ #define INIT_BLOCK_TX (TX_DESC_RING_SIZE) #define INIT_BLOCK_RX_DESC (RX_DESC_RING_SIZE) #define INIT_BLOCK_RX_COMP (RX_COMP_RING_SIZE) struct cas_init_block { struct cas_rx_comp rxcs[N_RX_COMP_RINGS][INIT_BLOCK_RX_COMP]; struct cas_rx_desc rxds[N_RX_DESC_RINGS][INIT_BLOCK_RX_DESC]; struct cas_tx_desc txds[N_TX_RINGS][INIT_BLOCK_TX]; __le64 tx_compwb; }; /* tiny buffers to deal with target abort issue. we allocate a bit * over so that we don't have target abort issues with these buffers * as well. */ #define TX_TINY_BUF_LEN 0x100 #define TX_TINY_BUF_BLOCK ((INIT_BLOCK_TX + 1)*TX_TINY_BUF_LEN) struct cas_tiny_count { int nbufs; int used; }; struct cas { spinlock_t lock; /* for most bits */ spinlock_t tx_lock[N_TX_RINGS]; /* tx bits */ spinlock_t stat_lock[N_TX_RINGS + 1]; /* for stat gathering */ spinlock_t rx_inuse_lock; /* rx inuse list */ spinlock_t rx_spare_lock; /* rx spare list */ void __iomem *regs; int tx_new[N_TX_RINGS], tx_old[N_TX_RINGS]; int rx_old[N_RX_DESC_RINGS]; int rx_cur[N_RX_COMP_RINGS], rx_new[N_RX_COMP_RINGS]; int rx_last[N_RX_DESC_RINGS]; struct napi_struct napi; /* Set when chip is actually in operational state * (ie. not power managed) */ int hw_running; int opened; struct mutex pm_mutex; /* open/close/suspend/resume */ struct cas_init_block *init_block; struct cas_tx_desc *init_txds[MAX_TX_RINGS]; struct cas_rx_desc *init_rxds[MAX_RX_DESC_RINGS]; struct cas_rx_comp *init_rxcs[MAX_RX_COMP_RINGS]; /* we use sk_buffs for tx and pages for rx. the rx skbuffs * are there for flow re-assembly. */ struct sk_buff *tx_skbs[N_TX_RINGS][TX_DESC_RING_SIZE]; struct sk_buff_head rx_flows[N_RX_FLOWS]; cas_page_t *rx_pages[N_RX_DESC_RINGS][RX_DESC_RING_SIZE]; struct list_head rx_spare_list, rx_inuse_list; int rx_spares_needed; /* for small packets when copying would be quicker than mapping */ struct cas_tiny_count tx_tiny_use[N_TX_RINGS][TX_DESC_RING_SIZE]; u8 *tx_tiny_bufs[N_TX_RINGS]; u32 msg_enable; /* N_TX_RINGS must be >= N_RX_DESC_RINGS */ struct net_device_stats net_stats[N_TX_RINGS + 1]; u32 pci_cfg[64 >> 2]; u8 pci_revision; int phy_type; int phy_addr; u32 phy_id; #define CAS_FLAG_1000MB_CAP 0x00000001 #define CAS_FLAG_REG_PLUS 0x00000002 #define CAS_FLAG_TARGET_ABORT 0x00000004 #define CAS_FLAG_SATURN 0x00000008 #define CAS_FLAG_RXD_POST_MASK 0x000000F0 #define CAS_FLAG_RXD_POST_SHIFT 4 #define CAS_FLAG_RXD_POST(x) ((1 << (CAS_FLAG_RXD_POST_SHIFT + (x))) & \ CAS_FLAG_RXD_POST_MASK) #define CAS_FLAG_ENTROPY_DEV 0x00000100 #define CAS_FLAG_NO_HW_CSUM 0x00000200 u32 cas_flags; int packet_min; /* minimum packet size */ int tx_fifo_size; int rx_fifo_size; int rx_pause_off; int rx_pause_on; int crc_size; /* 4 if half-duplex */ int pci_irq_INTC; int min_frame_size; /* for tx fifo workaround */ /* page size allocation */ int page_size; int page_order; int mtu_stride; u32 mac_rx_cfg; /* Autoneg & PHY control */ int link_cntl; int link_fcntl; enum link_state lstate; struct timer_list link_timer; int timer_ticks; struct work_struct reset_task; #if 0 atomic_t reset_task_pending; #else atomic_t reset_task_pending; atomic_t reset_task_pending_mtu; atomic_t reset_task_pending_spare; atomic_t reset_task_pending_all; #endif /* Link-down problem workaround */ #define LINK_TRANSITION_UNKNOWN 0 #define LINK_TRANSITION_ON_FAILURE 1 #define LINK_TRANSITION_STILL_FAILED 2 #define LINK_TRANSITION_LINK_UP 3 #define LINK_TRANSITION_LINK_CONFIG 4 #define LINK_TRANSITION_LINK_DOWN 5 #define LINK_TRANSITION_REQUESTED_RESET 6 int link_transition; int link_transition_jiffies_valid; unsigned long link_transition_jiffies; /* Tuning */ u8 orig_cacheline_size; /* value when loaded */ #define CAS_PREF_CACHELINE_SIZE 0x20 /* Minimum desired */ /* Diagnostic counters and state. */ int casreg_len; /* reg-space size for dumping */ u64 pause_entered; u16 pause_last_time_recvd; dma_addr_t block_dvma, tx_tiny_dvma[N_TX_RINGS]; struct pci_dev *pdev; struct net_device *dev; #if defined(CONFIG_OF) struct device_node *of_node; #endif /* Firmware Info */ u16 fw_load_addr; u32 fw_size; u8 *fw_data; }; #define TX_DESC_NEXT(r, x) (((x) + 1) & (TX_DESC_RINGN_SIZE(r) - 1)) #define RX_DESC_ENTRY(r, x) ((x) & (RX_DESC_RINGN_SIZE(r) - 1)) #define RX_COMP_ENTRY(r, x) ((x) & (RX_COMP_RINGN_SIZE(r) - 1)) #define TX_BUFF_COUNT(r, x, y) ((x) <= (y) ? ((y) - (x)) : \ (TX_DESC_RINGN_SIZE(r) - (x) + (y))) #define TX_BUFFS_AVAIL(cp, i) ((cp)->tx_old[(i)] <= (cp)->tx_new[(i)] ? \ (cp)->tx_old[(i)] + (TX_DESC_RINGN_SIZE(i) - 1) - (cp)->tx_new[(i)] : \ (cp)->tx_old[(i)] - (cp)->tx_new[(i)] - 1) #define CAS_ALIGN(addr, align) \ (((unsigned long) (addr) + ((align) - 1UL)) & ~((align) - 1)) #define RX_FIFO_SIZE 16384 #define EXPANSION_ROM_SIZE 65536 #define CAS_MC_EXACT_MATCH_SIZE 15 #define CAS_MC_HASH_SIZE 256 #define CAS_MC_HASH_MAX (CAS_MC_EXACT_MATCH_SIZE + \ CAS_MC_HASH_SIZE) #define TX_TARGET_ABORT_LEN 0x20 #define RX_SWIVEL_OFF_VAL 0x2 #define RX_AE_FREEN_VAL(x) (RX_DESC_RINGN_SIZE(x) >> 1) #define RX_AE_COMP_VAL (RX_COMP_RING_SIZE >> 1) #define RX_BLANK_INTR_PKT_VAL 0x05 #define RX_BLANK_INTR_TIME_VAL 0x0F #define HP_TCP_THRESH_VAL 1530 /* reduce to enable reassembly */ #define RX_SPARE_COUNT (RX_DESC_RING_SIZE >> 1) #define RX_SPARE_RECOVER_VAL (RX_SPARE_COUNT >> 2) #endif /* _CASSINI_H */ |