Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 | /* * spcp8x5 USB to serial adaptor driver * * Copyright (C) 2010-2013 Johan Hovold (jhovold@gmail.com) * Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn) * Copyright (C) 2006 S1 Corp. * * Original driver for 2.6.10 pl2303 driver by * Greg Kroah-Hartman (greg@kroah.com) * Changes for 2.6.20 by Harald Klein <hari@vt100.at> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/init.h> #include <linux/slab.h> #include <linux/tty.h> #include <linux/tty_driver.h> #include <linux/tty_flip.h> #include <linux/module.h> #include <linux/spinlock.h> #include <linux/usb.h> #include <linux/usb/serial.h> #define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver" #define SPCP825_QUIRK_NO_UART_STATUS 0x01 #define SPCP825_QUIRK_NO_WORK_MODE 0x02 #define SPCP8x5_007_VID 0x04FC #define SPCP8x5_007_PID 0x0201 #define SPCP8x5_008_VID 0x04fc #define SPCP8x5_008_PID 0x0235 #define SPCP8x5_PHILIPS_VID 0x0471 #define SPCP8x5_PHILIPS_PID 0x081e #define SPCP8x5_INTERMATIC_VID 0x04FC #define SPCP8x5_INTERMATIC_PID 0x0204 #define SPCP8x5_835_VID 0x04fc #define SPCP8x5_835_PID 0x0231 static const struct usb_device_id id_table[] = { { USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)}, { USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)}, { USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)}, { USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)}, { USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID), .driver_info = SPCP825_QUIRK_NO_UART_STATUS | SPCP825_QUIRK_NO_WORK_MODE }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, id_table); struct spcp8x5_usb_ctrl_arg { u8 type; u8 cmd; u8 cmd_type; u16 value; u16 index; u16 length; }; /* spcp8x5 spec register define */ #define MCR_CONTROL_LINE_RTS 0x02 #define MCR_CONTROL_LINE_DTR 0x01 #define MCR_DTR 0x01 #define MCR_RTS 0x02 #define MSR_STATUS_LINE_DCD 0x80 #define MSR_STATUS_LINE_RI 0x40 #define MSR_STATUS_LINE_DSR 0x20 #define MSR_STATUS_LINE_CTS 0x10 /* verdor command here , we should define myself */ #define SET_DEFAULT 0x40 #define SET_DEFAULT_TYPE 0x20 #define SET_UART_FORMAT 0x40 #define SET_UART_FORMAT_TYPE 0x21 #define SET_UART_FORMAT_SIZE_5 0x00 #define SET_UART_FORMAT_SIZE_6 0x01 #define SET_UART_FORMAT_SIZE_7 0x02 #define SET_UART_FORMAT_SIZE_8 0x03 #define SET_UART_FORMAT_STOP_1 0x00 #define SET_UART_FORMAT_STOP_2 0x04 #define SET_UART_FORMAT_PAR_NONE 0x00 #define SET_UART_FORMAT_PAR_ODD 0x10 #define SET_UART_FORMAT_PAR_EVEN 0x30 #define SET_UART_FORMAT_PAR_MASK 0xD0 #define SET_UART_FORMAT_PAR_SPACE 0x90 #define GET_UART_STATUS_TYPE 0xc0 #define GET_UART_STATUS 0x22 #define GET_UART_STATUS_MSR 0x06 #define SET_UART_STATUS 0x40 #define SET_UART_STATUS_TYPE 0x23 #define SET_UART_STATUS_MCR 0x0004 #define SET_UART_STATUS_MCR_DTR 0x01 #define SET_UART_STATUS_MCR_RTS 0x02 #define SET_UART_STATUS_MCR_LOOP 0x10 #define SET_WORKING_MODE 0x40 #define SET_WORKING_MODE_TYPE 0x24 #define SET_WORKING_MODE_U2C 0x00 #define SET_WORKING_MODE_RS485 0x01 #define SET_WORKING_MODE_PDMA 0x02 #define SET_WORKING_MODE_SPP 0x03 #define SET_FLOWCTL_CHAR 0x40 #define SET_FLOWCTL_CHAR_TYPE 0x25 #define GET_VERSION 0xc0 #define GET_VERSION_TYPE 0x26 #define SET_REGISTER 0x40 #define SET_REGISTER_TYPE 0x27 #define GET_REGISTER 0xc0 #define GET_REGISTER_TYPE 0x28 #define SET_RAM 0x40 #define SET_RAM_TYPE 0x31 #define GET_RAM 0xc0 #define GET_RAM_TYPE 0x32 /* how come ??? */ #define UART_STATE 0x08 #define UART_STATE_TRANSIENT_MASK 0x75 #define UART_DCD 0x01 #define UART_DSR 0x02 #define UART_BREAK_ERROR 0x04 #define UART_RING 0x08 #define UART_FRAME_ERROR 0x10 #define UART_PARITY_ERROR 0x20 #define UART_OVERRUN_ERROR 0x40 #define UART_CTS 0x80 struct spcp8x5_private { unsigned quirks; spinlock_t lock; u8 line_control; }; static int spcp8x5_probe(struct usb_serial *serial, const struct usb_device_id *id) { usb_set_serial_data(serial, (void *)id); return 0; } static int spcp8x5_attach(struct usb_serial *serial) { unsigned char num_ports = serial->num_ports; if (serial->num_bulk_in < num_ports || serial->num_bulk_out < num_ports) { dev_err(&serial->interface->dev, "missing endpoints\n"); return -ENODEV; } return 0; } static int spcp8x5_port_probe(struct usb_serial_port *port) { const struct usb_device_id *id = usb_get_serial_data(port->serial); struct spcp8x5_private *priv; priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; spin_lock_init(&priv->lock); priv->quirks = id->driver_info; usb_set_serial_port_data(port, priv); port->port.drain_delay = 256; return 0; } static int spcp8x5_port_remove(struct usb_serial_port *port) { struct spcp8x5_private *priv; priv = usb_get_serial_port_data(port); kfree(priv); return 0; } static int spcp8x5_set_ctrl_line(struct usb_serial_port *port, u8 mcr) { struct spcp8x5_private *priv = usb_get_serial_port_data(port); struct usb_device *dev = port->serial->dev; int retval; if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS) return -EPERM; retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), SET_UART_STATUS_TYPE, SET_UART_STATUS, mcr, 0x04, NULL, 0, 100); if (retval != 0) { dev_err(&port->dev, "failed to set control lines: %d\n", retval); } return retval; } static int spcp8x5_get_msr(struct usb_serial_port *port, u8 *status) { struct spcp8x5_private *priv = usb_get_serial_port_data(port); struct usb_device *dev = port->serial->dev; u8 *buf; int ret; if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS) return -EPERM; buf = kzalloc(1, GFP_KERNEL); if (!buf) return -ENOMEM; ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), GET_UART_STATUS, GET_UART_STATUS_TYPE, 0, GET_UART_STATUS_MSR, buf, 1, 100); if (ret < 1) { dev_err(&port->dev, "failed to get modem status: %d", ret); if (ret >= 0) ret = -EIO; goto out; } dev_dbg(&port->dev, "0xc0:0x22:0:6 %d - 0x02%x", ret, *buf); *status = *buf; ret = 0; out: kfree(buf); return ret; } static void spcp8x5_set_work_mode(struct usb_serial_port *port, u16 value, u16 index) { struct spcp8x5_private *priv = usb_get_serial_port_data(port); struct usb_device *dev = port->serial->dev; int ret; if (priv->quirks & SPCP825_QUIRK_NO_WORK_MODE) return; ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), SET_WORKING_MODE_TYPE, SET_WORKING_MODE, value, index, NULL, 0, 100); dev_dbg(&port->dev, "value = %#x , index = %#x\n", value, index); if (ret < 0) dev_err(&port->dev, "failed to set work mode: %d\n", ret); } static int spcp8x5_carrier_raised(struct usb_serial_port *port) { u8 msr; int ret; ret = spcp8x5_get_msr(port, &msr); if (ret || msr & MSR_STATUS_LINE_DCD) return 1; return 0; } static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on) { struct spcp8x5_private *priv = usb_get_serial_port_data(port); unsigned long flags; u8 control; spin_lock_irqsave(&priv->lock, flags); if (on) priv->line_control = MCR_CONTROL_LINE_DTR | MCR_CONTROL_LINE_RTS; else priv->line_control &= ~ (MCR_CONTROL_LINE_DTR | MCR_CONTROL_LINE_RTS); control = priv->line_control; spin_unlock_irqrestore(&priv->lock, flags); spcp8x5_set_ctrl_line(port, control); } static void spcp8x5_init_termios(struct tty_struct *tty) { tty->termios = tty_std_termios; tty->termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL; tty->termios.c_ispeed = 115200; tty->termios.c_ospeed = 115200; } static void spcp8x5_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { struct usb_serial *serial = port->serial; struct spcp8x5_private *priv = usb_get_serial_port_data(port); unsigned long flags; unsigned int cflag = tty->termios.c_cflag; unsigned short uartdata; unsigned char buf[2] = {0, 0}; int baud; int i; u8 control; /* check that they really want us to change something */ if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) return; /* set DTR/RTS active */ spin_lock_irqsave(&priv->lock, flags); control = priv->line_control; if (old_termios && (old_termios->c_cflag & CBAUD) == B0) { priv->line_control |= MCR_DTR; if (!(old_termios->c_cflag & CRTSCTS)) priv->line_control |= MCR_RTS; } if (control != priv->line_control) { control = priv->line_control; spin_unlock_irqrestore(&priv->lock, flags); spcp8x5_set_ctrl_line(port, control); } else { spin_unlock_irqrestore(&priv->lock, flags); } /* Set Baud Rate */ baud = tty_get_baud_rate(tty); switch (baud) { case 300: buf[0] = 0x00; break; case 600: buf[0] = 0x01; break; case 1200: buf[0] = 0x02; break; case 2400: buf[0] = 0x03; break; case 4800: buf[0] = 0x04; break; case 9600: buf[0] = 0x05; break; case 19200: buf[0] = 0x07; break; case 38400: buf[0] = 0x09; break; case 57600: buf[0] = 0x0a; break; case 115200: buf[0] = 0x0b; break; case 230400: buf[0] = 0x0c; break; case 460800: buf[0] = 0x0d; break; case 921600: buf[0] = 0x0e; break; /* case 1200000: buf[0] = 0x0f; break; */ /* case 2400000: buf[0] = 0x10; break; */ case 3000000: buf[0] = 0x11; break; /* case 6000000: buf[0] = 0x12; break; */ case 0: case 1000000: buf[0] = 0x0b; break; default: dev_err(&port->dev, "spcp825 driver does not support the " "baudrate requested, using default of 9600.\n"); } /* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */ switch (cflag & CSIZE) { case CS5: buf[1] |= SET_UART_FORMAT_SIZE_5; break; case CS6: buf[1] |= SET_UART_FORMAT_SIZE_6; break; case CS7: buf[1] |= SET_UART_FORMAT_SIZE_7; break; default: case CS8: buf[1] |= SET_UART_FORMAT_SIZE_8; break; } /* Set Stop bit2 : 0:1bit 1:2bit */ buf[1] |= (cflag & CSTOPB) ? SET_UART_FORMAT_STOP_2 : SET_UART_FORMAT_STOP_1; /* Set Parity bit3-4 01:Odd 11:Even */ if (cflag & PARENB) { buf[1] |= (cflag & PARODD) ? SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ; } else { buf[1] |= SET_UART_FORMAT_PAR_NONE; } uartdata = buf[0] | buf[1]<<8; i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), SET_UART_FORMAT_TYPE, SET_UART_FORMAT, uartdata, 0, NULL, 0, 100); if (i < 0) dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n", uartdata, i); dev_dbg(&port->dev, "0x21:0x40:0:0 %d\n", i); if (cflag & CRTSCTS) { /* enable hardware flow control */ spcp8x5_set_work_mode(port, 0x000a, SET_WORKING_MODE_U2C); } } static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port) { struct usb_serial *serial = port->serial; struct spcp8x5_private *priv = usb_get_serial_port_data(port); int ret; usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), 0x09, 0x00, 0x01, 0x00, NULL, 0x00, 100); if (ret) return ret; spcp8x5_set_ctrl_line(port, priv->line_control); if (tty) spcp8x5_set_termios(tty, port, NULL); return usb_serial_generic_open(tty, port); } static int spcp8x5_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; struct spcp8x5_private *priv = usb_get_serial_port_data(port); unsigned long flags; u8 control; spin_lock_irqsave(&priv->lock, flags); if (set & TIOCM_RTS) priv->line_control |= MCR_RTS; if (set & TIOCM_DTR) priv->line_control |= MCR_DTR; if (clear & TIOCM_RTS) priv->line_control &= ~MCR_RTS; if (clear & TIOCM_DTR) priv->line_control &= ~MCR_DTR; control = priv->line_control; spin_unlock_irqrestore(&priv->lock, flags); return spcp8x5_set_ctrl_line(port, control); } static int spcp8x5_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct spcp8x5_private *priv = usb_get_serial_port_data(port); unsigned long flags; unsigned int mcr; u8 status; unsigned int result; result = spcp8x5_get_msr(port, &status); if (result) return result; spin_lock_irqsave(&priv->lock, flags); mcr = priv->line_control; spin_unlock_irqrestore(&priv->lock, flags); result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) | ((mcr & MCR_RTS) ? TIOCM_RTS : 0) | ((status & MSR_STATUS_LINE_CTS) ? TIOCM_CTS : 0) | ((status & MSR_STATUS_LINE_DSR) ? TIOCM_DSR : 0) | ((status & MSR_STATUS_LINE_RI) ? TIOCM_RI : 0) | ((status & MSR_STATUS_LINE_DCD) ? TIOCM_CD : 0); return result; } static struct usb_serial_driver spcp8x5_device = { .driver = { .owner = THIS_MODULE, .name = "SPCP8x5", }, .id_table = id_table, .num_ports = 1, .open = spcp8x5_open, .dtr_rts = spcp8x5_dtr_rts, .carrier_raised = spcp8x5_carrier_raised, .set_termios = spcp8x5_set_termios, .init_termios = spcp8x5_init_termios, .tiocmget = spcp8x5_tiocmget, .tiocmset = spcp8x5_tiocmset, .probe = spcp8x5_probe, .attach = spcp8x5_attach, .port_probe = spcp8x5_port_probe, .port_remove = spcp8x5_port_remove, }; static struct usb_serial_driver * const serial_drivers[] = { &spcp8x5_device, NULL }; module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); |