Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 | /* elan-104nc.c -- MTD map driver for Arcom Control Systems ELAN-104NC Copyright (C) 2000 Arcom Control System Ltd This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA $Id: elan-104nc.c,v 1.21 2004/07/12 22:38:29 dwmw2 Exp $ The ELAN-104NC has up to 8 Mibyte of Intel StrataFlash (28F320/28F640) in x16 mode. This drivers uses the CFI probe and Intel Extended Command Set drivers. The flash is accessed as follows: 32 kbyte memory window at 0xb0000-0xb7fff 16 bit I/O port (0x22) for some sort of paging. The single flash device is divided into 3 partition which appear as separate MTD devices. Linux thinks that the I/O port is used by the PIC and hence check_region() will always fail. So we don't do it. I just hope it doesn't break anything. */ #include <linux/module.h> #include <linux/slab.h> #include <linux/ioport.h> #include <linux/init.h> #include <asm/io.h> #include <linux/mtd/map.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #define WINDOW_START 0xb0000 /* Number of bits in offset. */ #define WINDOW_SHIFT 15 #define WINDOW_LENGTH (1 << WINDOW_SHIFT) /* The bits for the offset into the window. */ #define WINDOW_MASK (WINDOW_LENGTH-1) #define PAGE_IO 0x22 #define PAGE_IO_SIZE 2 static volatile int page_in_window = -1; // Current page in window. static unsigned long iomapadr; static spinlock_t elan_104nc_spin = SPIN_LOCK_UNLOCKED; /* partition_info gives details on the logical partitions that the split the * single flash device into. If the size if zero we use up to the end of the * device. */ static struct mtd_partition partition_info[]={ { .name = "ELAN-104NC flash boot partition", .offset = 0, .size = 640*1024 }, { .name = "ELAN-104NC flash partition 1", .offset = 640*1024, .size = 896*1024 }, { .name = "ELAN-104NC flash partition 2", .offset = (640+896)*1024 } }; #define NUM_PARTITIONS (sizeof(partition_info)/sizeof(partition_info[0])) /* * If no idea what is going on here. This is taken from the FlashFX stuff. */ #define ROMCS 1 static inline void elan_104nc_setup(void) { u16 t; outw( 0x0023 + ROMCS*2, PAGE_IO ); t=inb( PAGE_IO+1 ); t=(t & 0xf9) | 0x04; outw( ((0x0023 + ROMCS*2) | (t << 8)), PAGE_IO ); } static inline void elan_104nc_page(struct map_info *map, unsigned long ofs) { unsigned long page = ofs >> WINDOW_SHIFT; if( page!=page_in_window ) { int cmd1; int cmd2; cmd1=(page & 0x700) + 0x0833 + ROMCS*0x4000; cmd2=((page & 0xff) << 8) + 0x0032; outw( cmd1, PAGE_IO ); outw( cmd2, PAGE_IO ); page_in_window = page; } } static map_word elan_104nc_read16(struct map_info *map, unsigned long ofs) { map_word ret; spin_lock(&elan_104nc_spin); elan_104nc_page(map, ofs); ret.x[0] = readw(iomapadr + (ofs & WINDOW_MASK)); spin_unlock(&elan_104nc_spin); return ret; } static void elan_104nc_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) { while (len) { unsigned long thislen = len; if (len > (WINDOW_LENGTH - (from & WINDOW_MASK))) thislen = WINDOW_LENGTH-(from & WINDOW_MASK); spin_lock(&elan_104nc_spin); elan_104nc_page(map, from); memcpy_fromio(to, iomapadr + (from & WINDOW_MASK), thislen); spin_unlock(&elan_104nc_spin); to += thislen; from += thislen; len -= thislen; } } static void elan_104nc_write16(struct map_info *map, map_word d, unsigned long adr) { spin_lock(&elan_104nc_spin); elan_104nc_page(map, adr); writew(d.x[0], iomapadr + (adr & WINDOW_MASK)); spin_unlock(&elan_104nc_spin); } static void elan_104nc_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) { while(len) { unsigned long thislen = len; if (len > (WINDOW_LENGTH - (to & WINDOW_MASK))) thislen = WINDOW_LENGTH-(to & WINDOW_MASK); spin_lock(&elan_104nc_spin); elan_104nc_page(map, to); memcpy_toio(iomapadr + (to & WINDOW_MASK), from, thislen); spin_unlock(&elan_104nc_spin); to += thislen; from += thislen; len -= thislen; } } static struct map_info elan_104nc_map = { .name = "ELAN-104NC flash", .phys = NO_XIP, .size = 8*1024*1024, /* this must be set to a maximum possible amount of flash so the cfi probe routines find all the chips */ .bankwidth = 2, .read = elan_104nc_read16, .copy_from = elan_104nc_copy_from, .write = elan_104nc_write16, .copy_to = elan_104nc_copy_to }; /* MTD device for all of the flash. */ static struct mtd_info *all_mtd; static void cleanup_elan_104nc(void) { if( all_mtd ) { del_mtd_partitions( all_mtd ); map_destroy( all_mtd ); } iounmap((void *)iomapadr); } int __init init_elan_104nc(void) { /* Urg! We use I/O port 0x22 without request_region()ing it, because it's already allocated to the PIC. */ iomapadr = (unsigned long)ioremap(WINDOW_START, WINDOW_LENGTH); if (!iomapadr) { printk( KERN_ERR"%s: failed to ioremap memory region\n", elan_104nc_map.name ); return -EIO; } printk( KERN_INFO"%s: IO:0x%x-0x%x MEM:0x%x-0x%x\n", elan_104nc_map.name, PAGE_IO, PAGE_IO+PAGE_IO_SIZE-1, WINDOW_START, WINDOW_START+WINDOW_LENGTH-1 ); elan_104nc_setup(); /* Probe for chip. */ all_mtd = do_map_probe("cfi_probe", &elan_104nc_map ); if( !all_mtd ) { cleanup_elan_104nc(); return -ENXIO; } all_mtd->owner = THIS_MODULE; /* Create MTD devices for each partition. */ add_mtd_partitions( all_mtd, partition_info, NUM_PARTITIONS ); return 0; } module_init(init_elan_104nc); module_exit(cleanup_elan_104nc); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Arcom Control Systems Ltd."); MODULE_DESCRIPTION("MTD map driver for Arcom Control Systems ELAN-104NC"); |