|
| binstr.sa 3.3 12/19/90
|
|
| Description: Converts a 64-bit binary integer to bcd.
|
| Input: 64-bit binary integer in d2:d3, desired length (LEN) in
| d0, and a pointer to start in memory for bcd characters
| in d0. (This pointer must point to byte 4 of the first
| lword of the packed decimal memory string.)
|
| Output: LEN bcd digits representing the 64-bit integer.
|
| Algorithm:
| The 64-bit binary is assumed to have a decimal point before
| bit 63. The fraction is multiplied by 10 using a mul by 2
| shift and a mul by 8 shift. The bits shifted out of the
| msb form a decimal digit. This process is iterated until
| LEN digits are formed.
|
| A1. Init d7 to 1. D7 is the byte digit counter, and if 1, the
| digit formed will be assumed the least significant. This is
| to force the first byte formed to have a 0 in the upper 4 bits.
|
| A2. Beginning of the loop:
| Copy the fraction in d2:d3 to d4:d5.
|
| A3. Multiply the fraction in d2:d3 by 8 using bit-field
| extracts and shifts. The three msbs from d2 will go into
| d1.
|
| A4. Multiply the fraction in d4:d5 by 2 using shifts. The msb
| will be collected by the carry.
|
| A5. Add using the carry the 64-bit quantities in d2:d3 and d4:d5
| into d2:d3. D1 will contain the bcd digit formed.
|
| A6. Test d7. If zero, the digit formed is the ms digit. If non-
| zero, it is the ls digit. Put the digit in its place in the
| upper word of d0. If it is the ls digit, write the word
| from d0 to memory.
|
| A7. Decrement d6 (LEN counter) and repeat the loop until zero.
|
| Implementation Notes:
|
| The registers are used as follows:
|
| d0: LEN counter
| d1: temp used to form the digit
| d2: upper 32-bits of fraction for mul by 8
| d3: lower 32-bits of fraction for mul by 8
| d4: upper 32-bits of fraction for mul by 2
| d5: lower 32-bits of fraction for mul by 2
| d6: temp for bit-field extracts
| d7: byte digit formation word;digit count {0,1}
| a0: pointer into memory for packed bcd string formation
|
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
| The copyright notice above does not evidence any
| actual or intended publication of such source code.
|BINSTR idnt 2,1 | Motorola 040 Floating Point Software Package
|section 8
#include "fpsp.h"
.global binstr
binstr:
moveml %d0-%d7,-(%a7)
|
| A1: Init d7
|
moveql #1,%d7 |init d7 for second digit
subql #1,%d0 |for dbf d0 would have LEN+1 passes
|
| A2. Copy d2:d3 to d4:d5. Start loop.
|
loop:
movel %d2,%d4 |copy the fraction before muls
movel %d3,%d5 |to d4:d5
|
| A3. Multiply d2:d3 by 8; extract msbs into d1.
|
bfextu %d2{#0:#3},%d1 |copy 3 msbs of d2 into d1
asll #3,%d2 |shift d2 left by 3 places
bfextu %d3{#0:#3},%d6 |copy 3 msbs of d3 into d6
asll #3,%d3 |shift d3 left by 3 places
orl %d6,%d2 |or in msbs from d3 into d2
|
| A4. Multiply d4:d5 by 2; add carry out to d1.
|
asll #1,%d5 |mul d5 by 2
roxll #1,%d4 |mul d4 by 2
swap %d6 |put 0 in d6 lower word
addxw %d6,%d1 |add in extend from mul by 2
|
| A5. Add mul by 8 to mul by 2. D1 contains the digit formed.
|
addl %d5,%d3 |add lower 32 bits
nop |ERRATA ; FIX #13 (Rev. 1.2 6/6/90)
addxl %d4,%d2 |add with extend upper 32 bits
nop |ERRATA ; FIX #13 (Rev. 1.2 6/6/90)
addxw %d6,%d1 |add in extend from add to d1
swap %d6 |with d6 = 0; put 0 in upper word
|
| A6. Test d7 and branch.
|
tstw %d7 |if zero, store digit & to loop
beqs first_d |if non-zero, form byte & write
sec_d:
swap %d7 |bring first digit to word d7b
aslw #4,%d7 |first digit in upper 4 bits d7b
addw %d1,%d7 |add in ls digit to d7b
moveb %d7,(%a0)+ |store d7b byte in memory
swap %d7 |put LEN counter in word d7a
clrw %d7 |set d7a to signal no digits done
dbf %d0,loop |do loop some more!
bras end_bstr |finished, so exit
first_d:
swap %d7 |put digit word in d7b
movew %d1,%d7 |put new digit in d7b
swap %d7 |put LEN counter in word d7a
addqw #1,%d7 |set d7a to signal first digit done
dbf %d0,loop |do loop some more!
swap %d7 |put last digit in string
lslw #4,%d7 |move it to upper 4 bits
moveb %d7,(%a0)+ |store it in memory string
|
| Clean up and return with result in fp0.
|
end_bstr:
moveml (%a7)+,%d0-%d7
rts
|end
