Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 | /* * Hardware info about DECstation 5000/200 systems (otherwise known as * 3max or KN02). * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. * * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions * are by courtesy of Chris Fraser. * Copyright (C) 2002, 2003 Maciej W. Rozycki */ #ifndef __ASM_MIPS_DEC_KN02_H #define __ASM_MIPS_DEC_KN02_H #ifndef __ASSEMBLY__ #include <linux/spinlock.h> #include <linux/types.h> #endif #include <asm/addrspace.h> #include <asm/dec/ecc.h> #define KN02_SLOT_BASE KSEG1ADDR(0x1fc00000) #define KN02_SLOT_SIZE 0x00080000 /* * Address ranges decoded by the "system slot" logic for onboard devices. */ #define KN02_SYS_ROM (0*KN02_SLOT_SIZE) /* system board ROM */ #define KN02_RES_1 (1*KN02_SLOT_SIZE) /* unused */ #define KN02_CHKSYN (2*KN02_SLOT_SIZE) /* ECC syndrome */ #define KN02_ERRADDR (3*KN02_SLOT_SIZE) /* bus error address */ #define KN02_DZ11 (4*KN02_SLOT_SIZE) /* DZ11 (DC7085) serial */ #define KN02_RTC (5*KN02_SLOT_SIZE) /* DS1287 RTC */ #define KN02_CSR (6*KN02_SLOT_SIZE) /* system ctrl & status reg */ #define KN02_SYS_ROM_7 (7*KN02_SLOT_SIZE) /* system board ROM (alias) */ /* * Some port addresses... */ #define KN02_DZ11_BASE (KN02_SLOT_BASE + KN02_DZ11) /* DZ11 */ #define KN02_RTC_BASE (KN02_SLOT_BASE + KN02_RTC) /* RTC */ #define KN02_CSR_BASE (KN02_SLOT_BASE + KN02_CSR) /* CSR */ /* * System Control & Status Register bits. */ #define KN02_CSR_RES_28 (0xf<<28) /* unused */ #define KN02_CSR_PSU (1<<27) /* power supply unit warning */ #define KN02_CSR_NVRAM (1<<26) /* ~NVRAM clear jumper */ #define KN02_CSR_REFEVEN (1<<25) /* mem refresh bank toggle */ #define KN03_CSR_NRMOD (1<<24) /* ~NRMOD manufact. jumper */ #define KN03_CSR_IOINTEN (0xff<<16) /* IRQ mask bits */ #define KN02_CSR_DIAGCHK (1<<15) /* diagn/norml ECC reads */ #define KN02_CSR_DIAGGEN (1<<14) /* diagn/norml ECC writes */ #define KN02_CSR_CORRECT (1<<13) /* ECC correct/check */ #define KN02_CSR_LEDIAG (1<<12) /* ECC diagn. latch strobe */ #define KN02_CSR_TXDIS (1<<11) /* DZ11 transmit disable */ #define KN02_CSR_BNK32M (1<<10) /* 32M/8M stride */ #define KN02_CSR_DIAGDN (1<<9) /* DIAGDN manufact. jumper */ #define KN02_CSR_BAUD38 (1<<8) /* DZ11 38/19kbps ext. rate */ #define KN03_CSR_IOINT (0xff<<0) /* IRQ status bits (r/o) */ #define KN03_CSR_LEDS (0xff<<0) /* ~diagnostic LEDs (w/o) */ /* * CPU interrupt bits. */ #define KN02_CPU_INR_RES_6 6 /* unused */ #define KN02_CPU_INR_BUS 5 /* memory, I/O bus read/write errors */ #define KN02_CPU_INR_RES_4 4 /* unused */ #define KN02_CPU_INR_RTC 3 /* DS1287 RTC */ #define KN02_CPU_INR_CASCADE 2 /* CSR cascade */ /* * CSR interrupt bits. */ #define KN02_CSR_INR_DZ11 7 /* DZ11 (DC7085) serial */ #define KN02_CSR_INR_LANCE 6 /* LANCE (Am7990) Ethernet */ #define KN02_CSR_INR_ASC 5 /* ASC (NCR53C94) SCSI */ #define KN02_CSR_INR_RES_4 4 /* unused */ #define KN02_CSR_INR_RES_3 3 /* unused */ #define KN02_CSR_INR_TC2 2 /* TURBOchannel slot #2 */ #define KN02_CSR_INR_TC1 1 /* TURBOchannel slot #1 */ #define KN02_CSR_INR_TC0 0 /* TURBOchannel slot #0 */ #define KN02_IRQ_BASE 8 /* first IRQ assigned to CSR */ #define KN02_IRQ_LINES 8 /* number of CSR interrupts */ #define KN02_IRQ_NR(n) ((n) + KN02_IRQ_BASE) #define KN02_IRQ_MASK(n) (1 << (n)) #define KN02_IRQ_ALL 0xff #ifndef __ASSEMBLY__ extern u32 cached_kn02_csr; extern spinlock_t kn02_lock; extern void init_kn02_irqs(int base); #endif #endif /* __ASM_MIPS_DEC_KN02_H */ |