Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 | /* SF16FMR2 radio driver for Linux radio support * heavily based on fmi driver... * (c) 2000-2002 Ziglio Frediano, freddy77@angelfire.com * * Notes on the hardware * * Frequency control is done digitally -- ie out(port,encodefreq(95.8)); * No volume control - only mute/unmute - you have to use line volume * * For read stereo/mono you must wait 0.1 sec after set frequency and * card unmuted so I set frequency on unmute * Signal handling seem to work only on autoscanning (not implemented) * * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org> */ #include <linux/module.h> /* Modules */ #include <linux/init.h> /* Initdata */ #include <linux/ioport.h> /* request_region */ #include <linux/delay.h> /* udelay */ #include <linux/videodev2.h> /* kernel radio structs */ #include <linux/mutex.h> #include <linux/version.h> /* for KERNEL_VERSION MACRO */ #include <linux/io.h> /* outb, outb_p */ #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> MODULE_AUTHOR("Ziglio Frediano, freddy77@angelfire.com"); MODULE_DESCRIPTION("A driver for the SF16FMR2 radio."); MODULE_LICENSE("GPL"); static int io = 0x384; static int radio_nr = -1; module_param(io, int, 0); MODULE_PARM_DESC(io, "I/O address of the SF16FMR2 card (should be 0x384, if do not work try 0x284)"); module_param(radio_nr, int, 0); #define RADIO_VERSION KERNEL_VERSION(0,0,2) #define AUD_VOL_INDEX 1 #undef DEBUG //#define DEBUG 1 #ifdef DEBUG # define debug_print(s) printk s #else # define debug_print(s) #endif /* this should be static vars for module size */ struct fmr2 { struct v4l2_device v4l2_dev; struct video_device vdev; struct mutex lock; int io; int curvol; /* 0-15 */ int mute; int stereo; /* card is producing stereo audio */ unsigned long curfreq; /* freq in kHz */ int card_type; }; static struct fmr2 fmr2_card; /* hw precision is 12.5 kHz * It is only useful to give freq in interval of 200 (=0.0125Mhz), * other bits will be truncated */ #define RSF16_ENCODE(x) ((x) / 200 + 856) #define RSF16_MINFREQ (87 * 16000) #define RSF16_MAXFREQ (108 * 16000) static inline void wait(int n, int io) { for (; n; --n) inb(io); } static void outbits(int bits, unsigned int data, int nWait, int io) { int bit; for (; --bits >= 0;) { bit = (data >> bits) & 1; outb(bit, io); wait(nWait, io); outb(bit | 2, io); wait(nWait, io); outb(bit, io); wait(nWait, io); } } static inline void fmr2_mute(int io) { outb(0x00, io); wait(4, io); } static inline void fmr2_unmute(int io) { outb(0x04, io); wait(4, io); } static inline int fmr2_stereo_mode(int io) { int n = inb(io); outb(6, io); inb(io); n = ((n >> 3) & 1) ^ 1; debug_print((KERN_DEBUG "stereo: %d\n", n)); return n; } static int fmr2_product_info(struct fmr2 *dev) { int n = inb(dev->io); n &= 0xC1; if (n == 0) { /* this should support volume set */ dev->card_type = 12; return 0; } /* not volume (mine is 11) */ dev->card_type = (n == 128) ? 11 : 0; return n; } static inline int fmr2_getsigstr(struct fmr2 *dev) { /* !!! works only if scanning freq */ int res = 0xffff; outb(5, dev->io); wait(4, dev->io); if (!(inb(dev->io) & 1)) res = 0; debug_print((KERN_DEBUG "signal: %d\n", res)); return res; } /* set frequency and unmute card */ static int fmr2_setfreq(struct fmr2 *dev) { unsigned long freq = dev->curfreq; fmr2_mute(dev->io); /* 0x42 for mono output * 0x102 forward scanning * 0x182 scansione avanti */ outbits(9, 0x2, 3, dev->io); outbits(16, RSF16_ENCODE(freq), 2, dev->io); fmr2_unmute(dev->io); /* wait 0.11 sec */ msleep(110); /* NOTE if mute this stop radio you must set freq on unmute */ dev->stereo = fmr2_stereo_mode(dev->io); return 0; } /* !!! not tested, in my card this does't work !!! */ static int fmr2_setvolume(struct fmr2 *dev) { int vol[16] = { 0x021, 0x084, 0x090, 0x104, 0x110, 0x204, 0x210, 0x402, 0x404, 0x408, 0x410, 0x801, 0x802, 0x804, 0x808, 0x810 }; int i, a; int n = vol[dev->curvol & 0x0f]; if (dev->card_type != 11) return 1; for (i = 12; --i >= 0; ) { a = ((n >> i) & 1) << 6; /* if (a==0) a = 0; else a = 0x40; */ outb(a | 4, dev->io); wait(4, dev->io); outb(a | 0x24, dev->io); wait(4, dev->io); outb(a | 4, dev->io); wait(4, dev->io); } for (i = 6; --i >= 0; ) { a = ((0x18 >> i) & 1) << 6; outb(a | 4, dev->io); wait(4, dev->io); outb(a | 0x24, dev->io); wait(4, dev->io); outb(a | 4, dev->io); wait(4, dev->io); } wait(4, dev->io); outb(0x14, dev->io); return 0; } static int vidioc_querycap(struct file *file, void *priv, struct v4l2_capability *v) { strlcpy(v->driver, "radio-sf16fmr2", sizeof(v->driver)); strlcpy(v->card, "SF16-FMR2 radio", sizeof(v->card)); strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); v->version = RADIO_VERSION; v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; return 0; } static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { struct fmr2 *fmr2 = video_drvdata(file); if (v->index > 0) return -EINVAL; strlcpy(v->name, "FM", sizeof(v->name)); v->type = V4L2_TUNER_RADIO; v->rangelow = RSF16_MINFREQ; v->rangehigh = RSF16_MAXFREQ; v->rxsubchans = fmr2->stereo ? V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO; v->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LOW; v->audmode = V4L2_TUNER_MODE_STEREO; mutex_lock(&fmr2->lock); v->signal = fmr2_getsigstr(fmr2); mutex_unlock(&fmr2->lock); return 0; } static int vidioc_s_tuner(struct file *file, void *priv, struct v4l2_tuner *v) { return v->index ? -EINVAL : 0; } static int vidioc_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { struct fmr2 *fmr2 = video_drvdata(file); if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) return -EINVAL; if (f->frequency < RSF16_MINFREQ || f->frequency > RSF16_MAXFREQ) return -EINVAL; /* rounding in steps of 200 to match the freq that will be used */ fmr2->curfreq = (f->frequency / 200) * 200; /* set card freq (if not muted) */ if (fmr2->curvol && !fmr2->mute) { mutex_lock(&fmr2->lock); fmr2_setfreq(fmr2); mutex_unlock(&fmr2->lock); } return 0; } static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { struct fmr2 *fmr2 = video_drvdata(file); if (f->tuner != 0) return -EINVAL; f->type = V4L2_TUNER_RADIO; f->frequency = fmr2->curfreq; return 0; } static int vidioc_queryctrl(struct file *file, void *priv, struct v4l2_queryctrl *qc) { struct fmr2 *fmr2 = video_drvdata(file); switch (qc->id) { case V4L2_CID_AUDIO_MUTE: return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1); case V4L2_CID_AUDIO_VOLUME: /* Only card_type == 11 implements volume */ if (fmr2->card_type == 11) return v4l2_ctrl_query_fill(qc, 0, 15, 1, 0); return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0); } return -EINVAL; } static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { struct fmr2 *fmr2 = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: ctrl->value = fmr2->mute; return 0; case V4L2_CID_AUDIO_VOLUME: ctrl->value = fmr2->curvol; return 0; } return -EINVAL; } static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { struct fmr2 *fmr2 = video_drvdata(file); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: fmr2->mute = ctrl->value; break; case V4L2_CID_AUDIO_VOLUME: fmr2->curvol = ctrl->value; break; default: return -EINVAL; } #ifdef DEBUG if (fmr2->curvol && !fmr2->mute) printk(KERN_DEBUG "unmute\n"); else printk(KERN_DEBUG "mute\n"); #endif mutex_lock(&fmr2->lock); if (fmr2->curvol && !fmr2->mute) { fmr2_setvolume(fmr2); /* Set frequency and unmute card */ fmr2_setfreq(fmr2); } else fmr2_mute(fmr2->io); mutex_unlock(&fmr2->lock); return 0; } static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) { *i = 0; return 0; } static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) { return i ? -EINVAL : 0; } static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a) { a->index = 0; strlcpy(a->name, "Radio", sizeof(a->name)); a->capability = V4L2_AUDCAP_STEREO; return 0; } static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a) { return a->index ? -EINVAL : 0; } static const struct v4l2_file_operations fmr2_fops = { .owner = THIS_MODULE, .unlocked_ioctl = video_ioctl2, }; static const struct v4l2_ioctl_ops fmr2_ioctl_ops = { .vidioc_querycap = vidioc_querycap, .vidioc_g_tuner = vidioc_g_tuner, .vidioc_s_tuner = vidioc_s_tuner, .vidioc_g_audio = vidioc_g_audio, .vidioc_s_audio = vidioc_s_audio, .vidioc_g_input = vidioc_g_input, .vidioc_s_input = vidioc_s_input, .vidioc_g_frequency = vidioc_g_frequency, .vidioc_s_frequency = vidioc_s_frequency, .vidioc_queryctrl = vidioc_queryctrl, .vidioc_g_ctrl = vidioc_g_ctrl, .vidioc_s_ctrl = vidioc_s_ctrl, }; static int __init fmr2_init(void) { struct fmr2 *fmr2 = &fmr2_card; struct v4l2_device *v4l2_dev = &fmr2->v4l2_dev; int res; strlcpy(v4l2_dev->name, "sf16fmr2", sizeof(v4l2_dev->name)); fmr2->io = io; fmr2->stereo = 1; mutex_init(&fmr2->lock); if (!request_region(fmr2->io, 2, "sf16fmr2")) { v4l2_err(v4l2_dev, "request_region failed!\n"); return -EBUSY; } res = v4l2_device_register(NULL, v4l2_dev); if (res < 0) { release_region(fmr2->io, 2); v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); return res; } strlcpy(fmr2->vdev.name, v4l2_dev->name, sizeof(fmr2->vdev.name)); fmr2->vdev.v4l2_dev = v4l2_dev; fmr2->vdev.fops = &fmr2_fops; fmr2->vdev.ioctl_ops = &fmr2_ioctl_ops; fmr2->vdev.release = video_device_release_empty; video_set_drvdata(&fmr2->vdev, fmr2); /* mute card - prevents noisy bootups */ fmr2_mute(fmr2->io); fmr2_product_info(fmr2); if (video_register_device(&fmr2->vdev, VFL_TYPE_RADIO, radio_nr) < 0) { v4l2_device_unregister(v4l2_dev); release_region(fmr2->io, 2); return -EINVAL; } v4l2_info(v4l2_dev, "SF16FMR2 radio card driver at 0x%x.\n", fmr2->io); debug_print((KERN_DEBUG "card_type %d\n", fmr2->card_type)); return 0; } static void __exit fmr2_exit(void) { struct fmr2 *fmr2 = &fmr2_card; video_unregister_device(&fmr2->vdev); v4l2_device_unregister(&fmr2->v4l2_dev); release_region(fmr2->io, 2); } module_init(fmr2_init); module_exit(fmr2_exit); #ifndef MODULE static int __init fmr2_setup_io(char *str) { get_option(&str, &io); return 1; } __setup("sf16fmr2=", fmr2_setup_io); #endif |