Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 | /* * Workbit NinjaSCSI-32Bi/UDE PCI/CardBus SCSI Host Bus Adapter driver * Basic data header * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #ifndef _NSP32_H #define _NSP32_H #include <linux/version.h> //#define NSP32_DEBUG 9 /* * VENDOR/DEVICE ID */ #define PCI_VENDOR_ID_IODATA 0x10fc #define PCI_VENDOR_ID_WORKBIT 0x1145 #define PCI_DEVICE_ID_NINJASCSI_32BI_CBSC_II 0x0005 #define PCI_DEVICE_ID_NINJASCSI_32BI_KME 0xf007 #define PCI_DEVICE_ID_NINJASCSI_32BI_WBT 0x8007 #define PCI_DEVICE_ID_WORKBIT_STANDARD 0xf010 #define PCI_DEVICE_ID_WORKBIT_DUALEDGE 0xf011 #define PCI_DEVICE_ID_NINJASCSI_32BI_LOGITEC 0xf012 #define PCI_DEVICE_ID_NINJASCSI_32BIB_LOGITEC 0xf013 #define PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO 0xf015 #define PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO_II 0x8009 /* * MODEL */ enum { MODEL_IODATA = 0, MODEL_KME = 1, MODEL_WORKBIT = 2, MODEL_LOGITEC = 3, MODEL_PCI_WORKBIT = 4, MODEL_PCI_LOGITEC = 5, MODEL_PCI_MELCO = 6, }; static char * nsp32_model[] = { "I-O DATA CBSC-II CardBus card", "KME SCSI CardBus card", "Workbit duo SCSI CardBus card", "Logitec CardBus card with external ROM", "Workbit / I-O DATA PCI card", "Logitec PCI card with external ROM", "Melco CardBus/PCI card with external ROM", }; /* * SCSI Generic Definitions */ #define EXTENDED_SDTR_LEN 0x03 /* Little Endian */ typedef u32 u32_le; typedef u16 u16_le; /* * BASIC Definitions */ #ifndef TRUE # define TRUE 1 #endif #ifndef FALSE # define FALSE 0 #endif #define ASSERT 1 #define NEGATE 0 /*******************/ /* normal register */ /*******************/ /* * Don't access below register with Double Word: * +00, +04, +08, +0c, +64, +80, +84, +88, +90, +c4, +c8, +cc, +d0. */ #define IRQ_CONTROL 0x00 /* BASE+00, W, W */ #define IRQ_STATUS 0x00 /* BASE+00, W, R */ # define IRQSTATUS_LATCHED_MSG BIT(0) # define IRQSTATUS_LATCHED_IO BIT(1) # define IRQSTATUS_LATCHED_CD BIT(2) # define IRQSTATUS_LATCHED_BUS_FREE BIT(3) # define IRQSTATUS_RESELECT_OCCUER BIT(4) # define IRQSTATUS_PHASE_CHANGE_IRQ BIT(5) # define IRQSTATUS_SCSIRESET_IRQ BIT(6) # define IRQSTATUS_TIMER_IRQ BIT(7) # define IRQSTATUS_FIFO_SHLD_IRQ BIT(8) # define IRQSTATUS_PCI_IRQ BIT(9) # define IRQSTATUS_BMCNTERR_IRQ BIT(10) # define IRQSTATUS_AUTOSCSI_IRQ BIT(11) # define PCI_IRQ_MASK BIT(12) # define TIMER_IRQ_MASK BIT(13) # define FIFO_IRQ_MASK BIT(14) # define SCSI_IRQ_MASK BIT(15) # define IRQ_CONTROL_ALL_IRQ_MASK (PCI_IRQ_MASK | \ TIMER_IRQ_MASK | \ FIFO_IRQ_MASK | \ SCSI_IRQ_MASK ) # define IRQSTATUS_ANY_IRQ (IRQSTATUS_RESELECT_OCCUER | \ IRQSTATUS_PHASE_CHANGE_IRQ | \ IRQSTATUS_SCSIRESET_IRQ | \ IRQSTATUS_TIMER_IRQ | \ IRQSTATUS_FIFO_SHLD_IRQ | \ IRQSTATUS_PCI_IRQ | \ IRQSTATUS_BMCNTERR_IRQ | \ IRQSTATUS_AUTOSCSI_IRQ ) #define TRANSFER_CONTROL 0x02 /* BASE+02, W, W */ #define TRANSFER_STATUS 0x02 /* BASE+02, W, R */ # define CB_MMIO_MODE BIT(0) # define CB_IO_MODE BIT(1) # define BM_TEST BIT(2) # define BM_TEST_DIR BIT(3) # define DUAL_EDGE_ENABLE BIT(4) # define NO_TRANSFER_TO_HOST BIT(5) # define TRANSFER_GO BIT(7) # define BLIEND_MODE BIT(8) # define BM_START BIT(9) # define ADVANCED_BM_WRITE BIT(10) # define BM_SINGLE_MODE BIT(11) # define FIFO_TRUE_FULL BIT(12) # define FIFO_TRUE_EMPTY BIT(13) # define ALL_COUNTER_CLR BIT(14) # define FIFOTEST BIT(15) #define INDEX_REG 0x04 /* BASE+04, Byte(R/W), Word(R) */ #define TIMER_SET 0x06 /* BASE+06, W, R/W */ # define TIMER_CNT_MASK (0xff) # define TIMER_STOP BIT(8) #define DATA_REG_LOW 0x08 /* BASE+08, LowW, R/W */ #define DATA_REG_HI 0x0a /* BASE+0a, Hi-W, R/W */ #define FIFO_REST_CNT 0x0c /* BASE+0c, W, R/W */ # define FIFO_REST_MASK 0x1ff # define FIFO_EMPTY_SHLD_FLAG BIT(14) # define FIFO_FULL_SHLD_FLAG BIT(15) #define SREQ_SMPL_RATE 0x0f /* BASE+0f, B, R/W */ # define SREQSMPLRATE_RATE0 BIT(0) # define SREQSMPLRATE_RATE1 BIT(1) # define SAMPLING_ENABLE BIT(2) # define SMPL_40M (0) /* 40MHz: 0-100ns/period */ # define SMPL_20M (SREQSMPLRATE_RATE0) /* 20MHz: 100-200ns/period */ # define SMPL_10M (SREQSMPLRATE_RATE1) /* 10Mhz: 200- ns/period */ #define SCSI_BUS_CONTROL 0x10 /* BASE+10, B, R/W */ # define BUSCTL_SEL BIT(0) # define BUSCTL_RST BIT(1) # define BUSCTL_DATAOUT_ENB BIT(2) # define BUSCTL_ATN BIT(3) # define BUSCTL_ACK BIT(4) # define BUSCTL_BSY BIT(5) # define AUTODIRECTION BIT(6) # define ACKENB BIT(7) #define CLR_COUNTER 0x12 /* BASE+12, B, W */ # define ACK_COUNTER_CLR BIT(0) # define SREQ_COUNTER_CLR BIT(1) # define FIFO_HOST_POINTER_CLR BIT(2) # define FIFO_REST_COUNT_CLR BIT(3) # define BM_COUNTER_CLR BIT(4) # define SAVED_ACK_CLR BIT(5) # define CLRCOUNTER_ALLMASK (ACK_COUNTER_CLR | \ SREQ_COUNTER_CLR | \ FIFO_HOST_POINTER_CLR | \ FIFO_REST_COUNT_CLR | \ BM_COUNTER_CLR | \ SAVED_ACK_CLR ) #define SCSI_BUS_MONITOR 0x12 /* BASE+12, B, R */ # define BUSMON_MSG BIT(0) # define BUSMON_IO BIT(1) # define BUSMON_CD BIT(2) # define BUSMON_BSY BIT(3) # define BUSMON_ACK BIT(4) # define BUSMON_REQ BIT(5) # define BUSMON_SEL BIT(6) # define BUSMON_ATN BIT(7) #define COMMAND_DATA 0x14 /* BASE+14, B, R/W */ #define PARITY_CONTROL 0x16 /* BASE+16, B, W */ # define PARITY_CHECK_ENABLE BIT(0) # define PARITY_ERROR_CLEAR BIT(1) #define PARITY_STATUS 0x16 /* BASE+16, B, R */ //# define PARITY_CHECK_ENABLE BIT(0) # define PARITY_ERROR_NORMAL BIT(1) # define PARITY_ERROR_LSB BIT(1) # define PARITY_ERROR_MSB BIT(2) #define RESELECT_ID 0x18 /* BASE+18, B, R */ #define COMMAND_CONTROL 0x18 /* BASE+18, W, W */ # define CLEAR_CDB_FIFO_POINTER BIT(0) # define AUTO_COMMAND_PHASE BIT(1) # define AUTOSCSI_START BIT(2) # define AUTOSCSI_RESTART BIT(3) # define AUTO_PARAMETER BIT(4) # define AUTO_ATN BIT(5) # define AUTO_MSGIN_00_OR_04 BIT(6) # define AUTO_MSGIN_02 BIT(7) # define AUTO_MSGIN_03 BIT(8) #define SET_ARBIT 0x1a /* BASE+1a, B, W */ # define ARBIT_GO BIT(0) # define ARBIT_CLEAR BIT(1) #define ARBIT_STATUS 0x1a /* BASE+1a, B, R */ //# define ARBIT_GO BIT(0) # define ARBIT_WIN BIT(1) # define ARBIT_FAIL BIT(2) # define AUTO_PARAMETER_VALID BIT(3) # define SGT_VALID BIT(4) #define SYNC_REG 0x1c /* BASE+1c, B, R/W */ #define ACK_WIDTH 0x1d /* BASE+1d, B, R/W */ #define SCSI_DATA_WITH_ACK 0x20 /* BASE+20, B, R/W */ #define SCSI_OUT_LATCH_TARGET_ID 0x22 /* BASE+22, B, W */ #define SCSI_DATA_IN 0x22 /* BASE+22, B, R */ #define SCAM_CONTROL 0x24 /* BASE+24, B, W */ #define SCAM_STATUS 0x24 /* BASE+24, B, R */ # define SCAM_MSG BIT(0) # define SCAM_IO BIT(1) # define SCAM_CD BIT(2) # define SCAM_BSY BIT(3) # define SCAM_SEL BIT(4) # define SCAM_XFEROK BIT(5) #define SCAM_DATA 0x26 /* BASE+26, B, R/W */ # define SD0 BIT(0) # define SD1 BIT(1) # define SD2 BIT(2) # define SD3 BIT(3) # define SD4 BIT(4) # define SD5 BIT(5) # define SD6 BIT(6) # define SD7 BIT(7) #define SACK_CNT 0x28 /* BASE+28, DW, R/W */ #define SREQ_CNT 0x2c /* BASE+2c, DW, R/W */ #define FIFO_DATA_LOW 0x30 /* BASE+30, B/W/DW, R/W */ #define FIFO_DATA_HIGH 0x32 /* BASE+32, B/W, R/W */ #define BM_START_ADR 0x34 /* BASE+34, DW, R/W */ #define BM_CNT 0x38 /* BASE+38, DW, R/W */ # define BM_COUNT_MASK 0x0001ffffUL # define SGTEND BIT(31) /* Last SGT marker */ #define SGT_ADR 0x3c /* BASE+3c, DW, R/W */ #define WAIT_REG 0x40 /* Bi only */ #define SCSI_EXECUTE_PHASE 0x40 /* BASE+40, W, R */ # define COMMAND_PHASE BIT(0) # define DATA_IN_PHASE BIT(1) # define DATA_OUT_PHASE BIT(2) # define MSGOUT_PHASE BIT(3) # define STATUS_PHASE BIT(4) # define ILLEGAL_PHASE BIT(5) # define BUS_FREE_OCCUER BIT(6) # define MSG_IN_OCCUER BIT(7) # define MSG_OUT_OCCUER BIT(8) # define SELECTION_TIMEOUT BIT(9) # define MSGIN_00_VALID BIT(10) # define MSGIN_02_VALID BIT(11) # define MSGIN_03_VALID BIT(12) # define MSGIN_04_VALID BIT(13) # define AUTOSCSI_BUSY BIT(15) #define SCSI_CSB_IN 0x42 /* BASE+42, B, R */ #define SCSI_MSG_OUT 0x44 /* BASE+44, DW, R/W */ # define MSGOUT_COUNT_MASK (BIT(0)|BIT(1)) # define MV_VALID BIT(7) #define SEL_TIME_OUT 0x48 /* BASE+48, W, R/W */ #define SAVED_SACK_CNT 0x4c /* BASE+4c, DW, R */ #define HTOSDATADELAY 0x50 /* BASE+50, B, R/W */ #define STOHDATADELAY 0x54 /* BASE+54, B, R/W */ #define ACKSUMCHECKRD 0x58 /* BASE+58, W, R */ #define REQSUMCHECKRD 0x5c /* BASE+5c, W, R */ /********************/ /* indexed register */ /********************/ #define CLOCK_DIV 0x00 /* BASE+08, IDX+00, B, R/W */ # define CLOCK_2 BIT(0) /* MCLK/2 */ # define CLOCK_4 BIT(1) /* MCLK/4 */ # define PCICLK BIT(7) /* PCICLK (33MHz) */ #define TERM_PWR_CONTROL 0x01 /* BASE+08, IDX+01, B, R/W */ # define BPWR BIT(0) # define SENSE BIT(1) /* Read Only */ #define EXT_PORT_DDR 0x02 /* BASE+08, IDX+02, B, R/W */ #define EXT_PORT 0x03 /* BASE+08, IDX+03, B, R/W */ # define LED_ON (0) # define LED_OFF BIT(0) #define IRQ_SELECT 0x04 /* BASE+08, IDX+04, W, R/W */ # define IRQSELECT_RESELECT_IRQ BIT(0) # define IRQSELECT_PHASE_CHANGE_IRQ BIT(1) # define IRQSELECT_SCSIRESET_IRQ BIT(2) # define IRQSELECT_TIMER_IRQ BIT(3) # define IRQSELECT_FIFO_SHLD_IRQ BIT(4) # define IRQSELECT_TARGET_ABORT_IRQ BIT(5) # define IRQSELECT_MASTER_ABORT_IRQ BIT(6) # define IRQSELECT_SERR_IRQ BIT(7) # define IRQSELECT_PERR_IRQ BIT(8) # define IRQSELECT_BMCNTERR_IRQ BIT(9) # define IRQSELECT_AUTO_SCSI_SEQ_IRQ BIT(10) #define OLD_SCSI_PHASE 0x05 /* BASE+08, IDX+05, B, R */ # define OLD_MSG BIT(0) # define OLD_IO BIT(1) # define OLD_CD BIT(2) # define OLD_BUSY BIT(3) #define FIFO_FULL_SHLD_COUNT 0x06 /* BASE+08, IDX+06, B, R/W */ #define FIFO_EMPTY_SHLD_COUNT 0x07 /* BASE+08, IDX+07, B, R/W */ #define EXP_ROM_CONTROL 0x08 /* BASE+08, IDX+08, B, R/W */ /* external ROM control */ # define ROM_WRITE_ENB BIT(0) # define IO_ACCESS_ENB BIT(1) # define ROM_ADR_CLEAR BIT(2) #define EXP_ROM_ADR 0x09 /* BASE+08, IDX+09, W, R/W */ #define EXP_ROM_DATA 0x0a /* BASE+08, IDX+0a, B, R/W */ #define CHIP_MODE 0x0b /* BASE+08, IDX+0b, B, R */ /* NinjaSCSI-32Bi only */ # define OEM0 BIT(1) /* OEM select */ /* 00=I-O DATA, 01=KME, 10=Workbit, 11=Ext ROM */ # define OEM1 BIT(2) /* OEM select */ # define OPTB BIT(3) /* KME mode select */ # define OPTC BIT(4) /* KME mode select */ # define OPTD BIT(5) /* KME mode select */ # define OPTE BIT(6) /* KME mode select */ # define OPTF BIT(7) /* Power management */ #define MISC_WR 0x0c /* BASE+08, IDX+0c, W, R/W */ #define MISC_RD 0x0c # define SCSI_DIRECTION_DETECTOR_SELECT BIT(0) # define SCSI2_HOST_DIRECTION_VALID BIT(1) /* Read only */ # define HOST2_SCSI_DIRECTION_VALID BIT(2) /* Read only */ # define DELAYED_BMSTART BIT(3) # define MASTER_TERMINATION_SELECT BIT(4) # define BMREQ_NEGATE_TIMING_SEL BIT(5) # define AUTOSEL_TIMING_SEL BIT(6) # define MISC_MABORT_MASK BIT(7) # define BMSTOP_CHANGE2_NONDATA_PHASE BIT(8) #define BM_CYCLE 0x0d /* BASE+08, IDX+0d, B, R/W */ # define BM_CYCLE0 BIT(0) # define BM_CYCLE1 BIT(1) # define BM_FRAME_ASSERT_TIMING BIT(2) # define BM_IRDY_ASSERT_TIMING BIT(3) # define BM_SINGLE_BUS_MASTER BIT(4) # define MEMRD_CMD0 BIT(5) # define SGT_AUTO_PARA_MEMED_CMD BIT(6) # define MEMRD_CMD1 BIT(7) #define SREQ_EDGH 0x0e /* BASE+08, IDX+0e, B, W */ # define SREQ_EDGH_SELECT BIT(0) #define UP_CNT 0x0f /* BASE+08, IDX+0f, B, W */ # define REQCNT_UP BIT(0) # define ACKCNT_UP BIT(1) # define BMADR_UP BIT(4) # define BMCNT_UP BIT(5) # define SGT_CNT_UP BIT(7) #define CFG_CMD_STR 0x10 /* BASE+08, IDX+10, W, R */ #define CFG_LATE_CACHE 0x11 /* BASE+08, IDX+11, W, R/W */ #define CFG_BASE_ADR_1 0x12 /* BASE+08, IDX+12, W, R */ #define CFG_BASE_ADR_2 0x13 /* BASE+08, IDX+13, W, R */ #define CFG_INLINE 0x14 /* BASE+08, IDX+14, W, R */ #define SERIAL_ROM_CTL 0x15 /* BASE+08, IDX+15, B, R */ # define SCL BIT(0) # define ENA BIT(1) # define SDA BIT(2) #define FIFO_HST_POINTER 0x16 /* BASE+08, IDX+16, B, R/W */ #define SREQ_DELAY 0x17 /* BASE+08, IDX+17, B, R/W */ #define SACK_DELAY 0x18 /* BASE+08, IDX+18, B, R/W */ #define SREQ_NOISE_CANCEL 0x19 /* BASE+08, IDX+19, B, R/W */ #define SDP_NOISE_CANCEL 0x1a /* BASE+08, IDX+1a, B, R/W */ #define DELAY_TEST 0x1b /* BASE+08, IDX+1b, B, R/W */ #define SD0_NOISE_CANCEL 0x20 /* BASE+08, IDX+20, B, R/W */ #define SD1_NOISE_CANCEL 0x21 /* BASE+08, IDX+21, B, R/W */ #define SD2_NOISE_CANCEL 0x22 /* BASE+08, IDX+22, B, R/W */ #define SD3_NOISE_CANCEL 0x23 /* BASE+08, IDX+23, B, R/W */ #define SD4_NOISE_CANCEL 0x24 /* BASE+08, IDX+24, B, R/W */ #define SD5_NOISE_CANCEL 0x25 /* BASE+08, IDX+25, B, R/W */ #define SD6_NOISE_CANCEL 0x26 /* BASE+08, IDX+26, B, R/W */ #define SD7_NOISE_CANCEL 0x27 /* BASE+08, IDX+27, B, R/W */ /* * Useful Bus Monitor status combinations. */ #define BUSMON_BUS_FREE 0 #define BUSMON_COMMAND ( BUSMON_BSY | BUSMON_CD | BUSMON_REQ ) #define BUSMON_MESSAGE_IN ( BUSMON_BSY | BUSMON_MSG | BUSMON_IO | BUSMON_CD | BUSMON_REQ ) #define BUSMON_MESSAGE_OUT ( BUSMON_BSY | BUSMON_MSG | BUSMON_CD | BUSMON_REQ ) #define BUSMON_DATA_IN ( BUSMON_BSY | BUSMON_IO | BUSMON_REQ ) #define BUSMON_DATA_OUT ( BUSMON_BSY | BUSMON_REQ ) #define BUSMON_STATUS ( BUSMON_BSY | BUSMON_IO | BUSMON_CD | BUSMON_REQ ) #define BUSMON_RESELECT ( BUSMON_IO | BUSMON_SEL) #define BUSMON_PHASE_MASK ( BUSMON_MSG | BUSMON_IO | BUSMON_CD | BUSMON_SEL) #define BUSPHASE_COMMAND ( BUSMON_COMMAND & BUSMON_PHASE_MASK ) #define BUSPHASE_MESSAGE_IN ( BUSMON_MESSAGE_IN & BUSMON_PHASE_MASK ) #define BUSPHASE_MESSAGE_OUT ( BUSMON_MESSAGE_OUT & BUSMON_PHASE_MASK ) #define BUSPHASE_DATA_IN ( BUSMON_DATA_IN & BUSMON_PHASE_MASK ) #define BUSPHASE_DATA_OUT ( BUSMON_DATA_OUT & BUSMON_PHASE_MASK ) #define BUSPHASE_STATUS ( BUSMON_STATUS & BUSMON_PHASE_MASK ) #define BUSPHASE_SELECT ( BUSMON_SEL | BUSMON_IO ) /************************************************************************ * structure for DMA/Scatter Gather list */ #define NSP32_SG_SIZE SG_ALL typedef struct _nsp32_sgtable { /* values must be little endian */ u32_le addr; /* transfer address */ u32_le len; /* transfer length. BIT(31) is for SGT_END mark */ } __attribute__ ((packed)) nsp32_sgtable; typedef struct _nsp32_sglun { nsp32_sgtable sgt[NSP32_SG_SIZE+1]; /* SG table */ } __attribute__ ((packed)) nsp32_sglun; #define NSP32_SG_TABLE_SIZE (sizeof(nsp32_sgtable) * NSP32_SG_SIZE * MAX_TARGET * MAX_LUN) /* Auto parameter mode memory map. */ /* All values must be little endian. */ typedef struct _nsp32_autoparam { u8 cdb[4 * 0x10]; /* SCSI Command */ u32_le msgout; /* outgoing messages */ u8 syncreg; /* sync register value */ u8 ackwidth; /* ack width register value */ u8 target_id; /* target/host device id */ u8 sample_reg; /* hazard killer sampling rate */ u16_le command_control; /* command control register */ u16_le transfer_control; /* transfer control register */ u32_le sgt_pointer; /* SG table physical address for DMA */ u32_le dummy[2]; } __attribute__ ((packed)) nsp32_autoparam; /* must be packed struct */ /* * host data structure */ /* message in/out buffer */ #define MSGOUTBUF_MAX 20 #define MSGINBUF_MAX 20 /* flag for trans_method */ #define NSP32_TRANSFER_BUSMASTER BIT(0) #define NSP32_TRANSFER_MMIO BIT(1) /* Not supported yet */ #define NSP32_TRANSFER_PIO BIT(2) /* Not supported yet */ /* * structure for connected LUN dynamic data * * Note: Currently tagged queuing is disabled, each nsp32_lunt holds * one SCSI command and one state. */ #define DISCPRIV_OK BIT(0) /* DISCPRIV Enable mode */ #define MSGIN03 BIT(1) /* Auto Msg In 03 Flag */ typedef struct _nsp32_lunt { struct scsi_cmnd *SCpnt; /* Current Handling struct scsi_cmnd */ unsigned long save_datp; /* Save Data Pointer - saved position from initial address */ int msgin03; /* auto msg in 03 flag */ unsigned int sg_num; /* Total number of SG entries */ int cur_entry; /* Current SG entry number */ nsp32_sglun *sglun; /* sg table per lun */ dma_addr_t sglun_paddr; /* sglun physical address */ } nsp32_lunt; /* * SCSI TARGET/LUN definition */ #define NSP32_HOST_SCSIID 7 /* SCSI initiator is everytime defined as 7 */ #define MAX_TARGET 8 #define MAX_LUN 8 /* XXX: In SPI3, max number of LUN is 64. */ typedef struct _nsp32_sync_table { unsigned char period_num; /* period number */ unsigned char ackwidth; /* ack width designated by period */ unsigned char start_period; /* search range - start period */ unsigned char end_period; /* search range - end period */ unsigned char sample_rate; /* hazard killer parameter */ } nsp32_sync_table; /* * structure for target device static data */ /* flag for nsp32_target.sync_flag */ #define SDTR_INITIATOR BIT(0) /* sending SDTR from initiator */ #define SDTR_TARGET BIT(1) /* sending SDTR from target */ #define SDTR_DONE BIT(2) /* exchanging SDTR has been processed */ /* syncronous period value for nsp32_target.config_max */ #define FAST5M 0x32 #define FAST10M 0x19 #define ULTRA20M 0x0c /* flag for nsp32_target.{sync_offset}, period */ #define ASYNC_OFFSET 0 /* asynchronous transfer */ #define SYNC_OFFSET 0xf /* synchronous transfer max offset */ /* syncreg: bit:07 06 05 04 03 02 01 00 ---PERIOD-- ---OFFSET-- */ #define TO_SYNCREG(period, offset) (((period) & 0x0f) << 4 | ((offset) & 0x0f)) typedef struct _nsp32_target { unsigned char syncreg; /* value for SYNCREG */ unsigned char ackwidth; /* value for ACKWIDTH */ unsigned char period; /* sync period (0-255) */ unsigned char offset; /* sync offset (0-15) */ int sync_flag; /* SDTR_*, 0 */ int limit_entry; /* max speed limit entry designated by EEPROM configuration */ unsigned char sample_reg; /* SREQ hazard killer register */ } nsp32_target; typedef struct _nsp32_hw_data { int IrqNumber; int BaseAddress; int NumAddress; void __iomem *MmioAddress; #define NSP32_MMIO_OFFSET 0x0800 unsigned long MmioLength; struct scsi_cmnd *CurrentSC; struct pci_dev *Pci; const struct pci_device_id *pci_devid; struct Scsi_Host *Host; spinlock_t Lock; char info_str[100]; /* allocated memory region */ nsp32_sglun *sg_list; /* sglist virtuxal address */ dma_addr_t sg_paddr; /* physical address of hw_sg_table */ nsp32_autoparam *autoparam; /* auto parameter transfer region */ dma_addr_t auto_paddr; /* physical address of autoparam */ int cur_entry; /* current sgt entry */ /* target/LUN */ nsp32_lunt *cur_lunt; /* Current connected LUN table */ nsp32_lunt lunt[MAX_TARGET][MAX_LUN]; /* All LUN table */ nsp32_target *cur_target; /* Current connected SCSI ID */ nsp32_target target[MAX_TARGET]; /* SCSI ID */ int cur_id; /* Current connected target ID */ int cur_lun; /* Current connected target LUN */ /* behavior setting parameters */ int trans_method; /* transfer method flag */ int resettime; /* Reset time */ int clock; /* clock dividing flag */ nsp32_sync_table *synct; /* sync_table determined by clock */ int syncnum; /* the max number of synct element */ /* message buffer */ unsigned char msgoutbuf[MSGOUTBUF_MAX]; /* msgout buffer */ char msgout_len; /* msgoutbuf length */ unsigned char msginbuf [MSGINBUF_MAX]; /* megin buffer */ char msgin_len; /* msginbuf length */ } nsp32_hw_data; /* * TIME definition */ #define RESET_HOLD_TIME 10000 /* reset time in us (SCSI-2 says the minimum is 25us) */ #define SEL_TIMEOUT_TIME 10000 /* 250ms defined in SCSI specification (25.6us/1unit) */ #define ARBIT_TIMEOUT_TIME 100 /* 100us */ #define REQSACK_TIMEOUT_TIME 10000 /* max wait time for REQ/SACK assertion or negation, 10000us == 10ms */ #endif /* _NSP32_H */ /* end */ |