Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 | /* * Motion-PRO board Device Tree Source * * Copyright (C) 2007 Semihalf * Marian Balakowicz <m8@semihalf.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ / { model = "promess,motionpro"; compatible = "promess,motionpro"; #address-cells = <1>; #size-cells = <1>; cpus { #address-cells = <1>; #size-cells = <0>; PowerPC,5200@0 { device_type = "cpu"; reg = <0>; d-cache-line-size = <20>; i-cache-line-size = <20>; d-cache-size = <4000>; // L1, 16K i-cache-size = <4000>; // L1, 16K timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader }; }; memory { device_type = "memory"; reg = <00000000 04000000>; // 64MB }; soc5200@f0000000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc5200b-immr"; ranges = <0 f0000000 0000c000>; reg = <f0000000 00000100>; bus-frequency = <0>; // from bootloader system-frequency = <0>; // from bootloader cdm@200 { compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; reg = <200 38>; }; mpc5200_pic: interrupt-controller@500 { // 5200 interrupts are encoded into two levels; interrupt-controller; #interrupt-cells = <3>; compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; reg = <500 80>; }; timer@600 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <600 10>; interrupts = <1 9 0>; interrupt-parent = <&mpc5200_pic>; fsl,has-wdt; }; timer@610 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <610 10>; interrupts = <1 a 0>; interrupt-parent = <&mpc5200_pic>; }; timer@620 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <620 10>; interrupts = <1 b 0>; interrupt-parent = <&mpc5200_pic>; }; timer@630 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <630 10>; interrupts = <1 c 0>; interrupt-parent = <&mpc5200_pic>; }; timer@640 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <640 10>; interrupts = <1 d 0>; interrupt-parent = <&mpc5200_pic>; }; timer@650 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <650 10>; interrupts = <1 e 0>; interrupt-parent = <&mpc5200_pic>; }; motionpro-led@660 { // Motion-PRO status LED compatible = "promess,motionpro-led"; label = "motionpro-statusled"; reg = <660 10>; interrupts = <1 f 0>; interrupt-parent = <&mpc5200_pic>; blink-delay = <64>; // 100 msec }; motionpro-led@670 { // Motion-PRO ready LED compatible = "promess,motionpro-led"; label = "motionpro-readyled"; reg = <670 10>; interrupts = <1 10 0>; interrupt-parent = <&mpc5200_pic>; }; rtc@800 { // Real time clock compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; reg = <800 100>; interrupts = <1 5 0 1 6 0>; interrupt-parent = <&mpc5200_pic>; }; mscan@980 { compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; interrupts = <2 12 0>; interrupt-parent = <&mpc5200_pic>; reg = <980 80>; }; gpio@b00 { compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; reg = <b00 40>; interrupts = <1 7 0>; interrupt-parent = <&mpc5200_pic>; }; gpio@c00 { compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; reg = <c00 40>; interrupts = <1 8 0 0 3 0>; interrupt-parent = <&mpc5200_pic>; }; spi@f00 { compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; reg = <f00 20>; interrupts = <2 d 0 2 e 0>; interrupt-parent = <&mpc5200_pic>; }; usb@1000 { compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; reg = <1000 ff>; interrupts = <2 6 0>; interrupt-parent = <&mpc5200_pic>; }; dma-controller@1200 { compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; reg = <1200 80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 3 8 0 3 9 0 3 a 0 3 b 0 3 c 0 3 d 0 3 e 0 3 f 0>; interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; reg = <1f00 100>; }; serial@2000 { // PSC1 device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; port-number = <0>; // Logical port assignment reg = <2000 100>; interrupts = <2 1 0>; interrupt-parent = <&mpc5200_pic>; }; // PSC2 in spi master mode spi@2200 { // PSC2 compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi"; cell-index = <1>; reg = <2200 100>; interrupts = <2 2 0>; interrupt-parent = <&mpc5200_pic>; }; // PSC5 in uart mode serial@2800 { // PSC5 device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; port-number = <4>; // Logical port assignment reg = <2800 100>; interrupts = <2 c 0>; interrupt-parent = <&mpc5200_pic>; }; ethernet@3000 { device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; reg = <3000 400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; phy-handle = <&phy0>; }; mdio@3000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; reg = <3000 400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. interrupt-parent = <&mpc5200_pic>; phy0: ethernet-phy@2 { device_type = "ethernet-phy"; reg = <2>; }; }; ata@3a00 { compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; reg = <3a00 100>; interrupts = <2 7 0>; interrupt-parent = <&mpc5200_pic>; }; i2c@3d40 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <3d40 40>; interrupts = <2 10 0>; interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; rtc@68 { device_type = "rtc"; compatible = "dallas,ds1339"; reg = <68>; }; }; sram@8000 { compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; reg = <8000 4000>; }; }; lpb { compatible = "fsl,lpb"; #address-cells = <2>; #size-cells = <1>; ranges = <0 0 ff000000 01000000 1 0 50000000 00010000 2 0 50010000 00010000 3 0 50020000 00010000>; // 8-bit DualPort SRAM on LocalPlus Bus CS1 kollmorgen@1,0 { compatible = "promess,motionpro-kollmorgen"; reg = <1 0 10000>; interrupts = <1 1 0>; interrupt-parent = <&mpc5200_pic>; }; // 8-bit board CPLD on LocalPlus Bus CS2 cpld@2,0 { compatible = "promess,motionpro-cpld"; reg = <2 0 10000>; }; // 8-bit custom Anybus Module on LocalPlus Bus CS3 anybus@3,0 { compatible = "promess,motionpro-anybus"; reg = <3 0 10000>; }; pro_module_general@3,0 { compatible = "promess,pro_module_general"; reg = <3 0 3>; }; pro_module_dio@3,800 { compatible = "promess,pro_module_dio"; reg = <3 800 2>; }; // 16-bit flash device at LocalPlus Bus CS0 flash@0,0 { compatible = "cfi-flash"; reg = <0 0 01000000>; bank-width = <2>; device-width = <2>; #size-cells = <1>; #address-cells = <1>; }; }; }; |