Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 | /* * Device driver for the SYMBIOS/LSILOGIC 53C8XX and 53C1010 family * of PCI-SCSI IO processors. * * Copyright (C) 1999-2001 Gerard Roudier <groudier@free.fr> * * This driver is derived from the Linux sym53c8xx driver. * Copyright (C) 1998-2000 Gerard Roudier * * The sym53c8xx driver is derived from the ncr53c8xx driver that had been * a port of the FreeBSD ncr driver to Linux-1.2.13. * * The original ncr driver has been written for 386bsd and FreeBSD by * Wolfgang Stanglmeier <wolf@cologne.de> * Stefan Esser <se@mi.Uni-Koeln.de> * Copyright (C) 1994 Wolfgang Stanglmeier * * Other major contributions: * * NVRAM detection and reading. * Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk> * *----------------------------------------------------------------------------- * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * Where this Software is combined with software released under the terms of * the GNU Public License ("GPL") and the terms of the GPL would require the * combined work to also be released under the terms of the GPL, the terms * and conditions of this License will apply in addition to those of the * GPL with the exception of any terms or conditions of this License that * conflict with, or are expressly prohibited by, the GPL. * * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef SYM53C8XX_H #define SYM53C8XX_H #include <linux/config.h> #ifdef CONFIG_SCSI_SYM53C8XX_IOMAPPED #define SYM_CONF_IOMAPPED #endif /* * DMA addressing mode. * * 0 : 32 bit addressing for all chips. * 1 : 40 bit addressing when supported by chip. * 2 : 64 bit addressing when supported by chip, * limited to 16 segments of 4 GB -> 64 GB max. */ #define SYM_CONF_DMA_ADDRESSING_MODE CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE /* * NCR PQS/PDS special device support. */ #if 1 #define SYM_CONF_PQS_PDS_SUPPORT #endif /* * NVRAM support. */ #if 1 #define SYM_CONF_NVRAM_SUPPORT (1) #endif /* * These options are not tunable from 'make config' */ #if 1 #define SYM_LINUX_PROC_INFO_SUPPORT #define SYM_LINUX_BOOT_COMMAND_LINE_SUPPORT #define SYM_LINUX_USER_COMMAND_SUPPORT #define SYM_LINUX_USER_INFO_SUPPORT #define SYM_LINUX_DEBUG_CONTROL_SUPPORT #endif /* * Also handle old NCR chips if not (0). */ #define SYM_CONF_GENERIC_SUPPORT (1) /* * Allow tags from 2 to 256, default 8 */ #ifndef CONFIG_SCSI_SYM53C8XX_MAX_TAGS #define CONFIG_SCSI_SYM53C8XX_MAX_TAGS (8) #endif #if CONFIG_SCSI_SYM53C8XX_MAX_TAGS < 2 #define SYM_CONF_MAX_TAG (2) #elif CONFIG_SCSI_SYM53C8XX_MAX_TAGS > 256 #define SYM_CONF_MAX_TAG (256) #else #define SYM_CONF_MAX_TAG CONFIG_SCSI_SYM53C8XX_MAX_TAGS #endif #ifndef CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS #define CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS SYM_CONF_MAX_TAG #endif /* * Anyway, we configure the driver for at least 64 tags per LUN. :) */ #if SYM_CONF_MAX_TAG <= 64 #define SYM_CONF_MAX_TAG_ORDER (6) #elif SYM_CONF_MAX_TAG <= 128 #define SYM_CONF_MAX_TAG_ORDER (7) #else #define SYM_CONF_MAX_TAG_ORDER (8) #endif /* * Max number of SG entries. */ #define SYM_CONF_MAX_SG (96) /* * Driver setup structure. * * This structure is initialized from linux config options. * It can be overridden at boot-up by the boot command line. */ struct sym_driver_setup { u_short max_tag; u_char burst_order; u_char scsi_led; u_char scsi_diff; u_char irq_mode; u_char scsi_bus_check; u_char host_id; u_char reverse_probe; u_char verbose; u_short debug; u_char settle_delay; u_char use_nvram; u_long excludes[8]; char tag_ctrl[100]; }; #define SYM_SETUP_MAX_TAG sym_driver_setup.max_tag #define SYM_SETUP_BURST_ORDER sym_driver_setup.burst_order #define SYM_SETUP_SCSI_LED sym_driver_setup.scsi_led #define SYM_SETUP_SCSI_DIFF sym_driver_setup.scsi_diff #define SYM_SETUP_IRQ_MODE sym_driver_setup.irq_mode #define SYM_SETUP_SCSI_BUS_CHECK sym_driver_setup.scsi_bus_check #define SYM_SETUP_HOST_ID sym_driver_setup.host_id /* Always enable parity. */ #define SYM_SETUP_PCI_PARITY 1 #define SYM_SETUP_SCSI_PARITY 1 /* * Initial setup. * * Can be overriden at startup by a command line. */ #define SYM_LINUX_DRIVER_SETUP { \ .max_tag = CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS, \ .burst_order = 7, \ .scsi_led = 1, \ .scsi_diff = 1, \ .irq_mode = 0, \ .scsi_bus_check = 1, \ .host_id = 7, \ .reverse_probe = 0, \ .verbose = 0, \ .debug = 0, \ .settle_delay = 3, \ .use_nvram = 1, \ } /* * Boot fail safe setup. * * Override initial setup from boot command line: * sym53c8xx=safe:y */ #define SYM_LINUX_DRIVER_SAFE_SETUP { \ .max_tag = 0, \ .burst_order = 0, \ .scsi_led = 0, \ .scsi_diff = 1, \ .irq_mode = 0, \ .scsi_bus_check = 2, \ .host_id = 7, \ .reverse_probe = 0, \ .verbose = 2, \ .debug = 0, \ .settle_delay = 10, \ .use_nvram = 1, \ } /* * This structure is initialized from linux config options. * It can be overridden at boot-up by the boot command line. */ #ifdef SYM_GLUE_C struct sym_driver_setup sym_driver_setup = SYM_LINUX_DRIVER_SETUP; #ifdef SYM_LINUX_DEBUG_CONTROL_SUPPORT u_int sym_debug_flags = 0; #endif #else extern struct sym_driver_setup sym_driver_setup; #ifdef SYM_LINUX_DEBUG_CONTROL_SUPPORT extern u_int sym_debug_flags; #endif #endif /* SYM_GLUE_C */ #ifdef SYM_LINUX_DEBUG_CONTROL_SUPPORT #define DEBUG_FLAGS sym_debug_flags #endif #define boot_verbose sym_driver_setup.verbose #endif /* SYM53C8XX_H */ |