Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834 1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871 1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892 1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 2032 2033 2034 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046 2047 2048 2049 2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063 2064 2065 2066 2067 2068 2069 2070 2071 2072 2073 2074 2075 2076 2077 2078 2079 2080 2081 2082 2083 2084 2085 2086 2087 2088 2089 2090 2091 2092 2093 2094 2095 2096 2097 2098 2099 2100 2101 2102 2103 2104 2105 2106 2107 2108 2109 2110 2111 2112 2113 2114 2115 2116 2117 2118 2119 2120 2121 2122 2123 2124 2125 2126 2127 2128 2129 2130 2131 2132 2133 2134 2135 2136 2137 2138 2139 2140 2141 2142 2143 2144 2145 2146 2147 2148 2149 2150 2151 2152 2153 2154 2155 2156 2157 2158 2159 2160 2161 2162 2163 2164 2165 2166 2167 2168 2169 2170 2171 2172 2173 2174 2175 2176 2177 2178 2179 2180 2181 2182 2183 2184 2185 2186 2187 2188 2189 2190 2191 2192 2193 2194 2195 2196 2197 2198 2199 2200 2201 2202 2203 2204 2205 2206 2207 2208 2209 2210 2211 2212 2213 2214 2215 2216 2217 2218 2219 2220 2221 2222 2223 2224 2225 2226 2227 2228 2229 2230 2231 2232 2233 2234 2235 2236 2237 2238 2239 2240 2241 2242 2243 2244 2245 2246 2247 2248 2249 2250 2251 2252 2253 2254 2255 2256 2257 2258 2259 2260 2261 2262 2263 2264 2265 2266 2267 2268 2269 2270 2271 2272 2273 2274 2275 2276 2277 2278 2279 2280 2281 2282 2283 2284 2285 2286 2287 2288 2289 2290 2291 2292 2293 2294 2295 2296 2297 2298 2299 2300 2301 2302 2303 2304 2305 2306 2307 2308 2309 2310 2311 2312 2313 2314 2315 2316 2317 2318 2319 2320 2321 2322 2323 2324 2325 2326 2327 2328 2329 2330 2331 2332 2333 2334 2335 2336 2337 2338 2339 2340 2341 2342 2343 2344 2345 2346 2347 2348 2349 2350 2351 2352 2353 2354 2355 2356 2357 2358 2359 2360 2361 2362 2363 2364 2365 2366 2367 2368 2369 2370 2371 2372 2373 2374 2375 2376 2377 2378 2379 2380 2381 2382 2383 2384 2385 2386 2387 2388 2389 2390 2391 2392 2393 2394 2395 2396 2397 2398 2399 2400 2401 2402 2403 2404 2405 2406 2407 2408 2409 2410 2411 2412 2413 2414 2415 2416 2417 2418 2419 2420 2421 2422 2423 2424 2425 2426 2427 2428 2429 2430 2431 2432 2433 2434 2435 2436 2437 2438 2439 2440 2441 2442 2443 2444 2445 2446 2447 2448 2449 2450 2451 2452 2453 2454 2455 2456 2457 2458 2459 2460 2461 2462 2463 2464 2465 2466 2467 2468 2469 2470 2471 2472 2473 2474 2475 2476 2477 2478 2479 2480 2481 2482 2483 2484 2485 2486 2487 2488 2489 2490 2491 2492 2493 2494 2495 2496 2497 2498 2499 2500 2501 2502 2503 2504 2505 2506 2507 2508 2509 2510 2511 2512 2513 2514 2515 2516 2517 2518 2519 2520 2521 2522 2523 2524 2525 2526 2527 2528 2529 2530 2531 2532 2533 2534 2535 2536 2537 2538 2539 2540 2541 2542 2543 2544 2545 2546 2547 2548 2549 2550 2551 2552 2553 2554 2555 2556 2557 2558 2559 2560 2561 2562 2563 2564 2565 2566 2567 2568 2569 2570 2571 2572 2573 2574 2575 2576 2577 2578 2579 2580 2581 2582 2583 2584 2585 2586 2587 2588 2589 2590 2591 2592 2593 2594 2595 2596 2597 2598 2599 2600 2601 2602 2603 2604 2605 2606 2607 2608 2609 2610 2611 2612 2613 2614 2615 2616 2617 2618 2619 2620 2621 2622 2623 2624 2625 2626 2627 2628 2629 2630 2631 2632 2633 2634 2635 2636 2637 2638 2639 2640 2641 2642 2643 2644 2645 2646 2647 2648 2649 2650 2651 2652 2653 2654 2655 2656 2657 2658 2659 2660 2661 2662 2663 2664 2665 2666 2667 2668 2669 2670 2671 2672 2673 2674 2675 2676 2677 2678 2679 2680 2681 2682 2683 2684 2685 2686 2687 2688 2689 2690 2691 2692 2693 2694 2695 2696 2697 2698 2699 2700 2701 2702 2703 2704 2705 2706 2707 2708 2709 2710 2711 2712 2713 2714 2715 2716 2717 2718 2719 2720 2721 2722 2723 2724 2725 2726 2727 2728 2729 2730 2731 2732 2733 2734 2735 2736 2737 2738 2739 2740 2741 2742 2743 2744 2745 2746 2747 2748 2749 2750 2751 2752 2753 2754 2755 2756 2757 2758 2759 2760 2761 2762 2763 2764 2765 2766 2767 2768 2769 2770 2771 2772 2773 2774 2775 2776 2777 2778 2779 2780 2781 2782 2783 2784 2785 2786 2787 2788 2789 2790 2791 2792 2793 2794 2795 2796 2797 2798 2799 2800 2801 2802 2803 2804 2805 2806 2807 2808 2809 2810 2811 2812 2813 2814 2815 2816 2817 2818 2819 2820 2821 2822 2823 2824 2825 2826 2827 2828 2829 2830 2831 2832 2833 2834 2835 2836 2837 2838 2839 2840 2841 2842 2843 2844 2845 2846 2847 2848 2849 2850 2851 2852 2853 2854 2855 2856 2857 2858 2859 2860 2861 2862 2863 2864 2865 2866 2867 2868 2869 2870 2871 2872 2873 2874 2875 2876 2877 2878 2879 2880 2881 2882 2883 2884 2885 2886 2887 2888 2889 2890 2891 2892 2893 2894 2895 2896 2897 2898 2899 2900 2901 2902 2903 2904 2905 2906 2907 2908 2909 2910 2911 2912 2913 2914 2915 2916 2917 2918 2919 2920 2921 2922 2923 2924 2925 2926 2927 2928 2929 2930 2931 2932 2933 2934 2935 2936 2937 2938 2939 2940 2941 2942 2943 2944 2945 2946 2947 2948 2949 2950 2951 2952 2953 2954 2955 2956 2957 2958 2959 2960 2961 2962 2963 2964 2965 2966 2967 2968 2969 2970 2971 2972 2973 2974 2975 2976 2977 2978 2979 2980 2981 2982 2983 2984 2985 2986 2987 2988 2989 2990 2991 2992 2993 2994 2995 2996 2997 2998 2999 3000 3001 3002 3003 3004 3005 3006 3007 3008 3009 3010 3011 3012 3013 3014 3015 3016 3017 3018 3019 3020 3021 3022 3023 3024 3025 3026 3027 3028 3029 3030 3031 3032 3033 3034 3035 3036 3037 3038 3039 3040 3041 3042 3043 3044 3045 3046 3047 3048 3049 3050 3051 3052 3053 3054 3055 3056 3057 3058 3059 3060 3061 3062 3063 3064 3065 3066 3067 3068 3069 3070 3071 3072 3073 3074 3075 3076 3077 3078 3079 3080 3081 3082 3083 3084 3085 3086 3087 3088 3089 3090 3091 3092 3093 3094 3095 3096 3097 3098 3099 3100 3101 3102 3103 3104 3105 3106 3107 3108 3109 3110 3111 3112 3113 3114 3115 3116 3117 3118 3119 3120 3121 3122 3123 3124 3125 3126 3127 3128 3129 3130 3131 3132 3133 3134 3135 3136 3137 3138 3139 3140 3141 3142 3143 3144 3145 3146 3147 3148 3149 3150 3151 3152 3153 3154 3155 3156 3157 3158 3159 3160 3161 3162 3163 3164 3165 3166 3167 3168 3169 3170 3171 3172 3173 3174 3175 3176 3177 3178 3179 3180 3181 3182 3183 3184 3185 3186 3187 3188 3189 3190 3191 3192 3193 3194 3195 3196 3197 3198 3199 3200 3201 3202 3203 3204 3205 3206 3207 3208 3209 3210 3211 3212 3213 3214 3215 3216 3217 3218 3219 3220 3221 3222 3223 3224 3225 3226 3227 3228 3229 3230 3231 3232 3233 3234 3235 3236 3237 3238 3239 3240 3241 3242 3243 3244 3245 3246 3247 3248 3249 3250 3251 3252 3253 3254 3255 3256 3257 3258 3259 3260 3261 3262 3263 3264 3265 3266 3267 3268 3269 3270 3271 3272 3273 3274 3275 3276 3277 3278 3279 3280 3281 3282 3283 3284 3285 3286 3287 3288 3289 3290 3291 3292 3293 3294 3295 3296 3297 3298 3299 3300 3301 3302 3303 3304 3305 3306 3307 3308 3309 3310 3311 3312 3313 3314 3315 3316 3317 3318 3319 3320 3321 3322 3323 3324 3325 3326 3327 3328 3329 3330 3331 3332 3333 3334 3335 3336 3337 3338 3339 3340 3341 3342 3343 3344 3345 3346 3347 3348 3349 3350 3351 3352 3353 3354 3355 3356 3357 3358 3359 3360 3361 3362 3363 3364 3365 3366 3367 3368 3369 3370 3371 3372 3373 3374 3375 3376 3377 3378 3379 3380 3381 3382 3383 3384 3385 3386 3387 3388 3389 3390 3391 3392 3393 3394 3395 3396 3397 3398 3399 3400 3401 3402 3403 3404 3405 3406 3407 3408 3409 3410 3411 3412 3413 3414 3415 3416 3417 3418 3419 3420 3421 3422 3423 3424 3425 3426 3427 3428 3429 3430 3431 3432 3433 3434 3435 3436 3437 3438 3439 3440 3441 3442 3443 3444 3445 3446 3447 3448 3449 3450 3451 3452 3453 3454 3455 3456 3457 3458 3459 3460 3461 3462 3463 3464 3465 3466 3467 3468 3469 3470 3471 3472 3473 3474 3475 3476 3477 3478 3479 3480 3481 3482 3483 3484 3485 3486 3487 3488 3489 3490 3491 3492 3493 3494 3495 3496 3497 3498 3499 3500 3501 3502 3503 3504 3505 3506 3507 3508 3509 3510 3511 3512 3513 3514 3515 3516 3517 3518 3519 3520 3521 3522 3523 3524 3525 3526 3527 3528 3529 3530 3531 3532 3533 3534 3535 3536 3537 3538 3539 3540 3541 3542 3543 3544 3545 3546 3547 3548 3549 3550 3551 3552 3553 3554 3555 3556 3557 3558 3559 3560 3561 3562 3563 3564 3565 3566 3567 3568 3569 3570 3571 3572 3573 3574 3575 3576 3577 3578 3579 3580 3581 3582 3583 3584 3585 3586 3587 3588 3589 3590 3591 3592 3593 3594 3595 3596 3597 3598 3599 3600 3601 3602 3603 3604 3605 3606 3607 3608 3609 3610 3611 3612 3613 3614 3615 3616 3617 3618 3619 3620 3621 3622 3623 3624 3625 3626 3627 3628 3629 3630 3631 3632 3633 3634 3635 3636 3637 3638 3639 3640 3641 3642 3643 3644 3645 3646 3647 3648 3649 3650 3651 3652 3653 3654 3655 3656 3657 3658 3659 3660 3661 3662 3663 3664 3665 3666 3667 3668 3669 3670 3671 3672 3673 3674 3675 3676 3677 3678 3679 3680 3681 3682 3683 3684 3685 3686 3687 3688 3689 3690 3691 3692 3693 3694 3695 3696 3697 3698 3699 3700 3701 3702 3703 3704 3705 3706 3707 3708 3709 3710 3711 3712 3713 3714 3715 3716 3717 3718 3719 3720 3721 3722 3723 3724 3725 3726 3727 3728 3729 3730 3731 3732 3733 3734 3735 3736 3737 3738 3739 3740 3741 3742 3743 3744 3745 3746 3747 3748 3749 3750 3751 3752 3753 3754 3755 3756 3757 3758 3759 3760 3761 3762 3763 3764 3765 3766 3767 3768 3769 3770 3771 3772 3773 3774 3775 3776 3777 3778 3779 3780 3781 3782 3783 3784 3785 3786 3787 3788 3789 3790 3791 3792 3793 3794 3795 3796 3797 3798 3799 3800 3801 3802 3803 3804 3805 3806 3807 3808 3809 3810 3811 3812 3813 3814 3815 3816 3817 3818 3819 3820 3821 3822 3823 3824 3825 3826 3827 3828 3829 3830 3831 3832 3833 3834 3835 3836 3837 3838 3839 3840 3841 3842 3843 3844 3845 3846 3847 3848 3849 3850 3851 3852 3853 3854 3855 3856 3857 3858 3859 3860 3861 3862 3863 3864 3865 3866 3867 3868 3869 3870 3871 3872 3873 3874 3875 3876 3877 3878 3879 3880 3881 3882 3883 3884 3885 3886 3887 3888 3889 3890 3891 3892 3893 3894 3895 3896 3897 3898 3899 3900 3901 3902 3903 3904 3905 3906 3907 3908 3909 3910 3911 3912 3913 3914 3915 3916 3917 3918 3919 3920 3921 3922 3923 3924 3925 3926 3927 3928 3929 3930 3931 3932 3933 3934 3935 3936 3937 3938 3939 3940 3941 3942 3943 3944 3945 3946 3947 3948 3949 3950 3951 3952 3953 3954 3955 3956 3957 3958 3959 3960 3961 3962 3963 3964 3965 3966 3967 3968 3969 3970 3971 3972 3973 3974 3975 3976 3977 3978 3979 3980 3981 3982 3983 3984 3985 3986 3987 3988 3989 3990 3991 3992 3993 3994 3995 3996 3997 3998 3999 4000 4001 4002 4003 4004 4005 4006 4007 4008 4009 4010 4011 4012 4013 4014 4015 4016 4017 4018 4019 4020 4021 4022 4023 4024 4025 4026 4027 4028 4029 4030 4031 4032 4033 4034 4035 4036 4037 4038 4039 4040 4041 4042 4043 4044 4045 4046 4047 4048 4049 4050 4051 4052 4053 4054 4055 4056 4057 4058 4059 4060 4061 4062 4063 4064 4065 4066 4067 4068 4069 4070 4071 4072 4073 4074 4075 4076 4077 4078 4079 4080 4081 4082 4083 4084 4085 4086 4087 4088 4089 4090 4091 4092 4093 4094 4095 4096 4097 4098 4099 4100 4101 4102 4103 4104 4105 4106 4107 4108 4109 4110 4111 4112 4113 4114 4115 4116 4117 4118 4119 4120 4121 4122 4123 4124 4125 4126 4127 4128 4129 4130 4131 4132 4133 4134 4135 4136 4137 4138 4139 4140 4141 4142 4143 4144 4145 4146 4147 4148 4149 4150 4151 4152 4153 4154 4155 4156 4157 4158 4159 4160 4161 4162 4163 4164 4165 4166 4167 4168 4169 4170 4171 4172 4173 4174 4175 4176 4177 4178 4179 4180 4181 4182 4183 4184 4185 4186 4187 4188 4189 4190 4191 4192 4193 4194 4195 4196 4197 4198 4199 4200 4201 4202 4203 4204 4205 4206 4207 4208 4209 4210 4211 4212 4213 4214 4215 4216 4217 4218 4219 4220 4221 4222 4223 4224 4225 4226 4227 4228 4229 4230 4231 4232 4233 4234 4235 4236 4237 4238 4239 4240 4241 4242 4243 4244 4245 4246 4247 4248 4249 4250 4251 4252 4253 4254 4255 4256 4257 4258 4259 4260 4261 4262 4263 4264 4265 4266 4267 4268 4269 4270 4271 4272 4273 4274 4275 4276 4277 4278 4279 4280 4281 4282 4283 4284 4285 4286 4287 4288 4289 4290 4291 4292 4293 4294 4295 4296 4297 4298 4299 4300 4301 4302 4303 4304 4305 4306 4307 4308 4309 4310 4311 4312 4313 4314 4315 4316 4317 4318 4319 4320 4321 4322 4323 4324 4325 4326 4327 4328 4329 4330 4331 4332 4333 4334 4335 4336 4337 4338 4339 4340 4341 4342 4343 4344 4345 4346 4347 4348 4349 4350 4351 4352 4353 4354 4355 4356 4357 4358 4359 4360 4361 4362 4363 4364 4365 4366 4367 4368 4369 4370 4371 4372 4373 4374 4375 4376 4377 4378 4379 4380 4381 4382 4383 4384 4385 4386 4387 4388 4389 4390 4391 4392 4393 4394 4395 4396 4397 4398 4399 4400 4401 4402 4403 4404 4405 4406 4407 4408 4409 4410 4411 4412 4413 4414 4415 4416 4417 4418 4419 4420 4421 4422 4423 4424 4425 4426 4427 4428 4429 4430 4431 4432 4433 4434 4435 4436 4437 4438 4439 4440 4441 4442 4443 4444 4445 4446 4447 4448 4449 4450 4451 4452 4453 4454 4455 4456 4457 4458 4459 4460 4461 4462 4463 4464 4465 4466 4467 4468 4469 4470 4471 4472 4473 4474 4475 4476 4477 4478 4479 4480 4481 4482 4483 4484 4485 4486 4487 4488 4489 4490 4491 4492 4493 4494 4495 4496 4497 4498 4499 4500 4501 4502 4503 4504 4505 4506 4507 4508 4509 4510 4511 4512 4513 4514 4515 4516 4517 4518 4519 4520 4521 4522 4523 4524 4525 4526 4527 4528 4529 4530 4531 4532 4533 4534 4535 4536 4537 4538 4539 4540 4541 4542 4543 4544 4545 4546 4547 4548 4549 4550 4551 4552 4553 4554 4555 4556 4557 4558 4559 | /* * usb-host.c: ETRAX 100LX USB Host Controller Driver (HCD) * * Copyright (c) 2002, 2003 Axis Communications AB. */ #include <linux/config.h> #include <linux/kernel.h> #include <linux/delay.h> #include <linux/ioport.h> #include <linux/sched.h> #include <linux/slab.h> #include <linux/errno.h> #include <linux/unistd.h> #include <linux/interrupt.h> #include <linux/init.h> #include <linux/version.h> #include <linux/list.h> #include <linux/spinlock.h> #include <asm/uaccess.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/dma.h> #include <asm/system.h> #include <asm/arch/svinto.h> #include <linux/usb.h> /* Ugly include because we don't live with the other host drivers. */ #include <../drivers/usb/core/hcd.h> #include <../drivers/usb/core/usb.h> #include "hc_crisv10.h" #define ETRAX_USB_HC_IRQ USB_HC_IRQ_NBR #define ETRAX_USB_RX_IRQ USB_DMA_RX_IRQ_NBR #define ETRAX_USB_TX_IRQ USB_DMA_TX_IRQ_NBR static const char *usb_hcd_version = "$Revision: 1.2 $"; #undef KERN_DEBUG #define KERN_DEBUG "" #undef USB_DEBUG_RH #undef USB_DEBUG_EPID #undef USB_DEBUG_SB #undef USB_DEBUG_DESC #undef USB_DEBUG_URB #undef USB_DEBUG_TRACE #undef USB_DEBUG_BULK #undef USB_DEBUG_CTRL #undef USB_DEBUG_INTR #undef USB_DEBUG_ISOC #ifdef USB_DEBUG_RH #define dbg_rh(format, arg...) printk(KERN_DEBUG __FILE__ ": (RH) " format "\n" , ## arg) #else #define dbg_rh(format, arg...) do {} while (0) #endif #ifdef USB_DEBUG_EPID #define dbg_epid(format, arg...) printk(KERN_DEBUG __FILE__ ": (EPID) " format "\n" , ## arg) #else #define dbg_epid(format, arg...) do {} while (0) #endif #ifdef USB_DEBUG_SB #define dbg_sb(format, arg...) printk(KERN_DEBUG __FILE__ ": (SB) " format "\n" , ## arg) #else #define dbg_sb(format, arg...) do {} while (0) #endif #ifdef USB_DEBUG_CTRL #define dbg_ctrl(format, arg...) printk(KERN_DEBUG __FILE__ ": (CTRL) " format "\n" , ## arg) #else #define dbg_ctrl(format, arg...) do {} while (0) #endif #ifdef USB_DEBUG_BULK #define dbg_bulk(format, arg...) printk(KERN_DEBUG __FILE__ ": (BULK) " format "\n" , ## arg) #else #define dbg_bulk(format, arg...) do {} while (0) #endif #ifdef USB_DEBUG_INTR #define dbg_intr(format, arg...) printk(KERN_DEBUG __FILE__ ": (INTR) " format "\n" , ## arg) #else #define dbg_intr(format, arg...) do {} while (0) #endif #ifdef USB_DEBUG_ISOC #define dbg_isoc(format, arg...) printk(KERN_DEBUG __FILE__ ": (ISOC) " format "\n" , ## arg) #else #define dbg_isoc(format, arg...) do {} while (0) #endif #ifdef USB_DEBUG_TRACE #define DBFENTER (printk(": Entering: %s\n", __FUNCTION__)) #define DBFEXIT (printk(": Exiting: %s\n", __FUNCTION__)) #else #define DBFENTER do {} while (0) #define DBFEXIT do {} while (0) #endif #define usb_pipeslow(pipe) (((pipe) >> 26) & 1) /*------------------------------------------------------------------- Virtual Root Hub -------------------------------------------------------------------*/ static __u8 root_hub_dev_des[] = { 0x12, /* __u8 bLength; */ 0x01, /* __u8 bDescriptorType; Device */ 0x00, /* __le16 bcdUSB; v1.0 */ 0x01, 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ 0x00, /* __u8 bDeviceSubClass; */ 0x00, /* __u8 bDeviceProtocol; */ 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ 0x00, /* __le16 idVendor; */ 0x00, 0x00, /* __le16 idProduct; */ 0x00, 0x00, /* __le16 bcdDevice; */ 0x00, 0x00, /* __u8 iManufacturer; */ 0x02, /* __u8 iProduct; */ 0x01, /* __u8 iSerialNumber; */ 0x01 /* __u8 bNumConfigurations; */ }; /* Configuration descriptor */ static __u8 root_hub_config_des[] = { 0x09, /* __u8 bLength; */ 0x02, /* __u8 bDescriptorType; Configuration */ 0x19, /* __le16 wTotalLength; */ 0x00, 0x01, /* __u8 bNumInterfaces; */ 0x01, /* __u8 bConfigurationValue; */ 0x00, /* __u8 iConfiguration; */ 0x40, /* __u8 bmAttributes; Bit 7: Bus-powered */ 0x00, /* __u8 MaxPower; */ /* interface */ 0x09, /* __u8 if_bLength; */ 0x04, /* __u8 if_bDescriptorType; Interface */ 0x00, /* __u8 if_bInterfaceNumber; */ 0x00, /* __u8 if_bAlternateSetting; */ 0x01, /* __u8 if_bNumEndpoints; */ 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ 0x00, /* __u8 if_bInterfaceSubClass; */ 0x00, /* __u8 if_bInterfaceProtocol; */ 0x00, /* __u8 if_iInterface; */ /* endpoint */ 0x07, /* __u8 ep_bLength; */ 0x05, /* __u8 ep_bDescriptorType; Endpoint */ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ 0x03, /* __u8 ep_bmAttributes; Interrupt */ 0x08, /* __le16 ep_wMaxPacketSize; 8 Bytes */ 0x00, 0xff /* __u8 ep_bInterval; 255 ms */ }; static __u8 root_hub_hub_des[] = { 0x09, /* __u8 bLength; */ 0x29, /* __u8 bDescriptorType; Hub-descriptor */ 0x02, /* __u8 bNbrPorts; */ 0x00, /* __u16 wHubCharacteristics; */ 0x00, 0x01, /* __u8 bPwrOn2pwrGood; 2ms */ 0x00, /* __u8 bHubContrCurrent; 0 mA */ 0x00, /* __u8 DeviceRemovable; *** 7 Ports max *** */ 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */ }; static struct timer_list bulk_start_timer = TIMER_INITIALIZER(NULL, 0, 0); static struct timer_list bulk_eot_timer = TIMER_INITIALIZER(NULL, 0, 0); /* We want the start timer to expire before the eot timer, because the former might start traffic, thus making it unnecessary for the latter to time out. */ #define BULK_START_TIMER_INTERVAL (HZ/10) /* 100 ms */ #define BULK_EOT_TIMER_INTERVAL (HZ/10+2) /* 120 ms */ #define OK(x) len = (x); dbg_rh("OK(%d): line: %d", x, __LINE__); break #define CHECK_ALIGN(x) if (((__u32)(x)) & 0x00000003) \ {panic("Alignment check (DWORD) failed at %s:%s:%d\n", __FILE__, __FUNCTION__, __LINE__);} #define SLAB_FLAG (in_interrupt() ? SLAB_ATOMIC : SLAB_KERNEL) #define KMALLOC_FLAG (in_interrupt() ? GFP_ATOMIC : GFP_KERNEL) /* Most helpful debugging aid */ #define assert(expr) ((void) ((expr) ? 0 : (err("assert failed at line %d",__LINE__)))) /* Alternative assert define which stops after a failed assert. */ /* #define assert(expr) \ { \ if (!(expr)) { \ err("assert failed at line %d",__LINE__); \ while (1); \ } \ } */ /* FIXME: Should RX_BUF_SIZE be a config option, or maybe we should adjust it dynamically? To adjust it dynamically we would have to get an interrupt when we reach the end of the rx descriptor list, or when we get close to the end, and then allocate more descriptors. */ #define NBR_OF_RX_DESC 512 #define RX_DESC_BUF_SIZE 1024 #define RX_BUF_SIZE (NBR_OF_RX_DESC * RX_DESC_BUF_SIZE) /* The number of epids is, among other things, used for pre-allocating ctrl, bulk and isoc EP descriptors (one for each epid). Assumed to be > 1 when initiating the DMA lists. */ #define NBR_OF_EPIDS 32 /* Support interrupt traffic intervals up to 128 ms. */ #define MAX_INTR_INTERVAL 128 /* If periodic traffic (intr or isoc) is to be used, then one entry in the EP table must be "invalid". By this we mean that we shouldn't care about epid attentions for this epid, or at least handle them differently from epid attentions for "valid" epids. This define determines which one to use (don't change it). */ #define INVALID_EPID 31 /* A special epid for the bulk dummys. */ #define DUMMY_EPID 30 /* This is just a software cache for the valid entries in R_USB_EPT_DATA. */ static __u32 epid_usage_bitmask; /* A bitfield to keep information on in/out traffic is needed to uniquely identify an endpoint on a device, since the most significant bit which indicates traffic direction is lacking in the ep_id field (ETRAX epids can handle both in and out traffic on endpoints that are otherwise identical). The USB framework, however, relies on them to be handled separately. For example, bulk IN and OUT urbs cannot be queued in the same list, since they would block each other. */ static __u32 epid_out_traffic; /* DMA IN cache bug. Align the DMA IN buffers to 32 bytes, i.e. a cache line. Since RX_DESC_BUF_SIZE is 1024 is a multiple of 32, all rx buffers will be cache aligned. */ static volatile unsigned char RxBuf[RX_BUF_SIZE] __attribute__ ((aligned (32))); static volatile USB_IN_Desc_t RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned (4))); /* Pointers into RxDescList. */ static volatile USB_IN_Desc_t *myNextRxDesc; static volatile USB_IN_Desc_t *myLastRxDesc; static volatile USB_IN_Desc_t *myPrevRxDesc; /* EP descriptors must be 32-bit aligned. */ static volatile USB_EP_Desc_t TxCtrlEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); static volatile USB_EP_Desc_t TxBulkEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); /* After each enabled bulk EP (IN or OUT) we put two disabled EP descriptors with the eol flag set, causing the DMA to stop the DMA channel. The first of these two has the intr flag set, which gives us a dma8_sub0_descr interrupt. When we receive this, we advance the DMA one step in the EP list and then restart the bulk channel, thus forcing a switch between bulk EP descriptors in each frame. */ static volatile USB_EP_Desc_t TxBulkDummyEPList[NBR_OF_EPIDS][2] __attribute__ ((aligned (4))); static volatile USB_EP_Desc_t TxIsocEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); static volatile USB_SB_Desc_t TxIsocSB_zout __attribute__ ((aligned (4))); static volatile USB_EP_Desc_t TxIntrEPList[MAX_INTR_INTERVAL] __attribute__ ((aligned (4))); static volatile USB_SB_Desc_t TxIntrSB_zout __attribute__ ((aligned (4))); /* A zout transfer makes a memory access at the address of its buf pointer, which means that setting this buf pointer to 0 will cause an access to the flash. In addition to this, setting sw_len to 0 results in a 16/32 bytes (depending on DMA burst size) transfer. Instead, we set it to 1, and point it to this buffer. */ static int zout_buffer[4] __attribute__ ((aligned (4))); /* Cache for allocating new EP and SB descriptors. */ static kmem_cache_t *usb_desc_cache; /* Cache for the registers allocated in the top half. */ static kmem_cache_t *top_half_reg_cache; /* Cache for the data allocated in the isoc descr top half. */ static kmem_cache_t *isoc_compl_cache; static struct usb_bus *etrax_usb_bus; /* This is a circular (double-linked) list of the active urbs for each epid. The head is never removed, and new urbs are linked onto the list as urb_entry_t elements. Don't reference urb_list directly; use the wrapper functions instead. Note that working with these lists might require spinlock protection. */ static struct list_head urb_list[NBR_OF_EPIDS]; /* Read about the need and usage of this lock in submit_ctrl_urb. */ static spinlock_t urb_list_lock; /* Used when unlinking asynchronously. */ static struct list_head urb_unlink_list; /* for returning string descriptors in UTF-16LE */ static int ascii2utf (char *ascii, __u8 *utf, int utfmax) { int retval; for (retval = 0; *ascii && utfmax > 1; utfmax -= 2, retval += 2) { *utf++ = *ascii++ & 0x7f; *utf++ = 0; } return retval; } static int usb_root_hub_string (int id, int serial, char *type, __u8 *data, int len) { char buf [30]; // assert (len > (2 * (sizeof (buf) + 1))); // assert (strlen (type) <= 8); // language ids if (id == 0) { *data++ = 4; *data++ = 3; /* 4 bytes data */ *data++ = 0; *data++ = 0; /* some language id */ return 4; // serial number } else if (id == 1) { sprintf (buf, "%x", serial); // product description } else if (id == 2) { sprintf (buf, "USB %s Root Hub", type); // id 3 == vendor description // unsupported IDs --> "stall" } else return 0; data [0] = 2 + ascii2utf (buf, data + 2, len - 2); data [1] = 3; return data [0]; } /* Wrappers around the list functions (include/linux/list.h). */ static inline int urb_list_empty(int epid) { return list_empty(&urb_list[epid]); } /* Returns first urb for this epid, or NULL if list is empty. */ static inline struct urb *urb_list_first(int epid) { struct urb *first_urb = 0; if (!urb_list_empty(epid)) { /* Get the first urb (i.e. head->next). */ urb_entry_t *urb_entry = list_entry((&urb_list[epid])->next, urb_entry_t, list); first_urb = urb_entry->urb; } return first_urb; } /* Adds an urb_entry last in the list for this epid. */ static inline void urb_list_add(struct urb *urb, int epid) { urb_entry_t *urb_entry = (urb_entry_t *)kmalloc(sizeof(urb_entry_t), KMALLOC_FLAG); assert(urb_entry); urb_entry->urb = urb; list_add_tail(&urb_entry->list, &urb_list[epid]); } /* Search through the list for an element that contains this urb. (The list is expected to be short and the one we are about to delete will often be the first in the list.) */ static inline urb_entry_t *__urb_list_entry(struct urb *urb, int epid) { struct list_head *entry; struct list_head *tmp; urb_entry_t *urb_entry; list_for_each_safe(entry, tmp, &urb_list[epid]) { urb_entry = list_entry(entry, urb_entry_t, list); assert(urb_entry); assert(urb_entry->urb); if (urb_entry->urb == urb) { return urb_entry; } } return 0; } /* Delete an urb from the list. */ static inline void urb_list_del(struct urb *urb, int epid) { urb_entry_t *urb_entry = __urb_list_entry(urb, epid); assert(urb_entry); /* Delete entry and free. */ list_del(&urb_entry->list); kfree(urb_entry); } /* Move an urb to the end of the list. */ static inline void urb_list_move_last(struct urb *urb, int epid) { urb_entry_t *urb_entry = __urb_list_entry(urb, epid); assert(urb_entry); list_del(&urb_entry->list); list_add_tail(&urb_entry->list, &urb_list[epid]); } /* Get the next urb in the list. */ static inline struct urb *urb_list_next(struct urb *urb, int epid) { urb_entry_t *urb_entry = __urb_list_entry(urb, epid); assert(urb_entry); if (urb_entry->list.next != &urb_list[epid]) { struct list_head *elem = urb_entry->list.next; urb_entry = list_entry(elem, urb_entry_t, list); return urb_entry->urb; } else { return NULL; } } /* For debug purposes only. */ static inline void urb_list_dump(int epid) { struct list_head *entry; struct list_head *tmp; urb_entry_t *urb_entry; int i = 0; info("Dumping urb list for epid %d", epid); list_for_each_safe(entry, tmp, &urb_list[epid]) { urb_entry = list_entry(entry, urb_entry_t, list); info(" entry %d, urb = 0x%lx", i, (unsigned long)urb_entry->urb); } } static void init_rx_buffers(void); static int etrax_rh_unlink_urb(struct urb *urb); static void etrax_rh_send_irq(struct urb *urb); static void etrax_rh_init_int_timer(struct urb *urb); static void etrax_rh_int_timer_do(unsigned long ptr); static int etrax_usb_setup_epid(struct urb *urb); static int etrax_usb_lookup_epid(struct urb *urb); static int etrax_usb_allocate_epid(void); static void etrax_usb_free_epid(int epid); static int etrax_remove_from_sb_list(struct urb *urb); static void* etrax_usb_buffer_alloc(struct usb_bus* bus, size_t size, unsigned mem_flags, dma_addr_t *dma); static void etrax_usb_buffer_free(struct usb_bus *bus, size_t size, void *addr, dma_addr_t dma); static void etrax_usb_add_to_bulk_sb_list(struct urb *urb, int epid); static void etrax_usb_add_to_ctrl_sb_list(struct urb *urb, int epid); static void etrax_usb_add_to_intr_sb_list(struct urb *urb, int epid); static void etrax_usb_add_to_isoc_sb_list(struct urb *urb, int epid); static int etrax_usb_submit_bulk_urb(struct urb *urb); static int etrax_usb_submit_ctrl_urb(struct urb *urb); static int etrax_usb_submit_intr_urb(struct urb *urb); static int etrax_usb_submit_isoc_urb(struct urb *urb); static int etrax_usb_submit_urb(struct urb *urb, unsigned mem_flags); static int etrax_usb_unlink_urb(struct urb *urb, int status); static int etrax_usb_get_frame_number(struct usb_device *usb_dev); static irqreturn_t etrax_usb_tx_interrupt(int irq, void *vhc, struct pt_regs *regs); static irqreturn_t etrax_usb_rx_interrupt(int irq, void *vhc, struct pt_regs *regs); static irqreturn_t etrax_usb_hc_interrupt_top_half(int irq, void *vhc, struct pt_regs *regs); static void etrax_usb_hc_interrupt_bottom_half(void *data); static void etrax_usb_isoc_descr_interrupt_bottom_half(void *data); /* The following is a list of interrupt handlers for the host controller interrupts we use. They are called from etrax_usb_hc_interrupt_bottom_half. */ static void etrax_usb_hc_isoc_eof_interrupt(void); static void etrax_usb_hc_bulk_eot_interrupt(int timer_induced); static void etrax_usb_hc_epid_attn_interrupt(usb_interrupt_registers_t *reg); static void etrax_usb_hc_port_status_interrupt(usb_interrupt_registers_t *reg); static void etrax_usb_hc_ctl_status_interrupt(usb_interrupt_registers_t *reg); static int etrax_rh_submit_urb (struct urb *urb); /* Forward declaration needed because they are used in the rx interrupt routine. */ static void etrax_usb_complete_urb(struct urb *urb, int status); static void etrax_usb_complete_bulk_urb(struct urb *urb, int status); static void etrax_usb_complete_ctrl_urb(struct urb *urb, int status); static void etrax_usb_complete_intr_urb(struct urb *urb, int status); static void etrax_usb_complete_isoc_urb(struct urb *urb, int status); static int etrax_usb_hc_init(void); static void etrax_usb_hc_cleanup(void); static struct usb_operations etrax_usb_device_operations = { .get_frame_number = etrax_usb_get_frame_number, .submit_urb = etrax_usb_submit_urb, .unlink_urb = etrax_usb_unlink_urb, .buffer_alloc = etrax_usb_buffer_alloc, .buffer_free = etrax_usb_buffer_free }; /* Note that these functions are always available in their "__" variants, for use in error situations. The "__" missing variants are controlled by the USB_DEBUG_DESC/ USB_DEBUG_URB macros. */ static void __dump_urb(struct urb* purb) { printk("\nurb :0x%08lx\n", (unsigned long)purb); printk("dev :0x%08lx\n", (unsigned long)purb->dev); printk("pipe :0x%08x\n", purb->pipe); printk("status :%d\n", purb->status); printk("transfer_flags :0x%08x\n", purb->transfer_flags); printk("transfer_buffer :0x%08lx\n", (unsigned long)purb->transfer_buffer); printk("transfer_buffer_length:%d\n", purb->transfer_buffer_length); printk("actual_length :%d\n", purb->actual_length); printk("setup_packet :0x%08lx\n", (unsigned long)purb->setup_packet); printk("start_frame :%d\n", purb->start_frame); printk("number_of_packets :%d\n", purb->number_of_packets); printk("interval :%d\n", purb->interval); printk("error_count :%d\n", purb->error_count); printk("context :0x%08lx\n", (unsigned long)purb->context); printk("complete :0x%08lx\n\n", (unsigned long)purb->complete); } static void __dump_in_desc(volatile USB_IN_Desc_t *in) { printk("\nUSB_IN_Desc at 0x%08lx\n", (unsigned long)in); printk(" sw_len : 0x%04x (%d)\n", in->sw_len, in->sw_len); printk(" command : 0x%04x\n", in->command); printk(" next : 0x%08lx\n", in->next); printk(" buf : 0x%08lx\n", in->buf); printk(" hw_len : 0x%04x (%d)\n", in->hw_len, in->hw_len); printk(" status : 0x%04x\n\n", in->status); } static void __dump_sb_desc(volatile USB_SB_Desc_t *sb) { char tt = (sb->command & 0x30) >> 4; char *tt_string; switch (tt) { case 0: tt_string = "zout"; break; case 1: tt_string = "in"; break; case 2: tt_string = "out"; break; case 3: tt_string = "setup"; break; default: tt_string = "unknown (weird)"; } printk("\n USB_SB_Desc at 0x%08lx\n", (unsigned long)sb); printk(" command : 0x%04x\n", sb->command); printk(" rem : %d\n", (sb->command & 0x3f00) >> 8); printk(" full : %d\n", (sb->command & 0x40) >> 6); printk(" tt : %d (%s)\n", tt, tt_string); printk(" intr : %d\n", (sb->command & 0x8) >> 3); printk(" eot : %d\n", (sb->command & 0x2) >> 1); printk(" eol : %d\n", sb->command & 0x1); printk(" sw_len : 0x%04x (%d)\n", sb->sw_len, sb->sw_len); printk(" next : 0x%08lx\n", sb->next); printk(" buf : 0x%08lx\n\n", sb->buf); } static void __dump_ep_desc(volatile USB_EP_Desc_t *ep) { printk("\nUSB_EP_Desc at 0x%08lx\n", (unsigned long)ep); printk(" command : 0x%04x\n", ep->command); printk(" ep_id : %d\n", (ep->command & 0x1f00) >> 8); printk(" enable : %d\n", (ep->command & 0x10) >> 4); printk(" intr : %d\n", (ep->command & 0x8) >> 3); printk(" eof : %d\n", (ep->command & 0x2) >> 1); printk(" eol : %d\n", ep->command & 0x1); printk(" hw_len : 0x%04x (%d)\n", ep->hw_len, ep->hw_len); printk(" next : 0x%08lx\n", ep->next); printk(" sub : 0x%08lx\n\n", ep->sub); } static inline void __dump_ep_list(int pipe_type) { volatile USB_EP_Desc_t *ep; volatile USB_EP_Desc_t *first_ep; volatile USB_SB_Desc_t *sb; switch (pipe_type) { case PIPE_BULK: first_ep = &TxBulkEPList[0]; break; case PIPE_CONTROL: first_ep = &TxCtrlEPList[0]; break; case PIPE_INTERRUPT: first_ep = &TxIntrEPList[0]; break; case PIPE_ISOCHRONOUS: first_ep = &TxIsocEPList[0]; break; default: warn("Cannot dump unknown traffic type"); return; } ep = first_ep; printk("\n\nDumping EP list...\n\n"); do { __dump_ep_desc(ep); /* Cannot phys_to_virt on 0 as it turns into 80000000, which is != 0. */ sb = ep->sub ? phys_to_virt(ep->sub) : 0; while (sb) { __dump_sb_desc(sb); sb = sb->next ? phys_to_virt(sb->next) : 0; } ep = (volatile USB_EP_Desc_t *)(phys_to_virt(ep->next)); } while (ep != first_ep); } static inline void __dump_ept_data(int epid) { unsigned long flags; __u32 r_usb_ept_data; if (epid < 0 || epid > 31) { printk("Cannot dump ept data for invalid epid %d\n", epid); return; } save_flags(flags); cli(); *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); nop(); r_usb_ept_data = *R_USB_EPT_DATA; restore_flags(flags); printk("\nR_USB_EPT_DATA = 0x%x for epid %d :\n", r_usb_ept_data, epid); if (r_usb_ept_data == 0) { /* No need for more detailed printing. */ return; } printk(" valid : %d\n", (r_usb_ept_data & 0x80000000) >> 31); printk(" hold : %d\n", (r_usb_ept_data & 0x40000000) >> 30); printk(" error_count_in : %d\n", (r_usb_ept_data & 0x30000000) >> 28); printk(" t_in : %d\n", (r_usb_ept_data & 0x08000000) >> 27); printk(" low_speed : %d\n", (r_usb_ept_data & 0x04000000) >> 26); printk(" port : %d\n", (r_usb_ept_data & 0x03000000) >> 24); printk(" error_code : %d\n", (r_usb_ept_data & 0x00c00000) >> 22); printk(" t_out : %d\n", (r_usb_ept_data & 0x00200000) >> 21); printk(" error_count_out : %d\n", (r_usb_ept_data & 0x00180000) >> 19); printk(" max_len : %d\n", (r_usb_ept_data & 0x0003f800) >> 11); printk(" ep : %d\n", (r_usb_ept_data & 0x00000780) >> 7); printk(" dev : %d\n", (r_usb_ept_data & 0x0000003f)); } static inline void __dump_ept_data_list(void) { int i; printk("Dumping the whole R_USB_EPT_DATA list\n"); for (i = 0; i < 32; i++) { __dump_ept_data(i); } } #ifdef USB_DEBUG_DESC #define dump_in_desc(...) __dump_in_desc(...) #define dump_sb_desc(...) __dump_sb_desc(...) #define dump_ep_desc(...) __dump_ep_desc(...) #else #define dump_in_desc(...) do {} while (0) #define dump_sb_desc(...) do {} while (0) #define dump_ep_desc(...) do {} while (0) #endif #ifdef USB_DEBUG_URB #define dump_urb(x) __dump_urb(x) #else #define dump_urb(x) do {} while (0) #endif static void init_rx_buffers(void) { int i; DBFENTER; for (i = 0; i < (NBR_OF_RX_DESC - 1); i++) { RxDescList[i].sw_len = RX_DESC_BUF_SIZE; RxDescList[i].command = 0; RxDescList[i].next = virt_to_phys(&RxDescList[i + 1]); RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE)); RxDescList[i].hw_len = 0; RxDescList[i].status = 0; /* DMA IN cache bug. (struct etrax_dma_descr has the same layout as USB_IN_Desc for the relevant fields.) */ prepare_rx_descriptor((struct etrax_dma_descr*)&RxDescList[i]); } RxDescList[i].sw_len = RX_DESC_BUF_SIZE; RxDescList[i].command = IO_STATE(USB_IN_command, eol, yes); RxDescList[i].next = virt_to_phys(&RxDescList[0]); RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE)); RxDescList[i].hw_len = 0; RxDescList[i].status = 0; myNextRxDesc = &RxDescList[0]; myLastRxDesc = &RxDescList[NBR_OF_RX_DESC - 1]; myPrevRxDesc = &RxDescList[NBR_OF_RX_DESC - 1]; *R_DMA_CH9_FIRST = virt_to_phys(myNextRxDesc); *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, start); DBFEXIT; } static void init_tx_bulk_ep(void) { int i; DBFENTER; for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { CHECK_ALIGN(&TxBulkEPList[i]); TxBulkEPList[i].hw_len = 0; TxBulkEPList[i].command = IO_FIELD(USB_EP_command, epid, i); TxBulkEPList[i].sub = 0; TxBulkEPList[i].next = virt_to_phys(&TxBulkEPList[i + 1]); /* Initiate two EPs, disabled and with the eol flag set. No need for any preserved epid. */ /* The first one has the intr flag set so we get an interrupt when the DMA channel is about to become disabled. */ CHECK_ALIGN(&TxBulkDummyEPList[i][0]); TxBulkDummyEPList[i][0].hw_len = 0; TxBulkDummyEPList[i][0].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) | IO_STATE(USB_EP_command, eol, yes) | IO_STATE(USB_EP_command, intr, yes)); TxBulkDummyEPList[i][0].sub = 0; TxBulkDummyEPList[i][0].next = virt_to_phys(&TxBulkDummyEPList[i][1]); /* The second one. */ CHECK_ALIGN(&TxBulkDummyEPList[i][1]); TxBulkDummyEPList[i][1].hw_len = 0; TxBulkDummyEPList[i][1].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) | IO_STATE(USB_EP_command, eol, yes)); TxBulkDummyEPList[i][1].sub = 0; /* The last dummy's next pointer is the same as the current EP's next pointer. */ TxBulkDummyEPList[i][1].next = virt_to_phys(&TxBulkEPList[i + 1]); } /* Configure the last one. */ CHECK_ALIGN(&TxBulkEPList[i]); TxBulkEPList[i].hw_len = 0; TxBulkEPList[i].command = (IO_STATE(USB_EP_command, eol, yes) | IO_FIELD(USB_EP_command, epid, i)); TxBulkEPList[i].sub = 0; TxBulkEPList[i].next = virt_to_phys(&TxBulkEPList[0]); /* No need configuring dummy EPs for the last one as it will never be used for bulk traffic (i == INVALD_EPID at this point). */ /* Set up to start on the last EP so we will enable it when inserting traffic for the first time (imitating the situation where the DMA has stopped because there was no more traffic). */ *R_DMA_CH8_SUB0_EP = virt_to_phys(&TxBulkEPList[i]); /* No point in starting the bulk channel yet. *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */ DBFEXIT; } static void init_tx_ctrl_ep(void) { int i; DBFENTER; for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { CHECK_ALIGN(&TxCtrlEPList[i]); TxCtrlEPList[i].hw_len = 0; TxCtrlEPList[i].command = IO_FIELD(USB_EP_command, epid, i); TxCtrlEPList[i].sub = 0; TxCtrlEPList[i].next = virt_to_phys(&TxCtrlEPList[i + 1]); } CHECK_ALIGN(&TxCtrlEPList[i]); TxCtrlEPList[i].hw_len = 0; TxCtrlEPList[i].command = (IO_STATE(USB_EP_command, eol, yes) | IO_FIELD(USB_EP_command, epid, i)); TxCtrlEPList[i].sub = 0; TxCtrlEPList[i].next = virt_to_phys(&TxCtrlEPList[0]); *R_DMA_CH8_SUB1_EP = virt_to_phys(&TxCtrlEPList[0]); *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start); DBFEXIT; } static void init_tx_intr_ep(void) { int i; DBFENTER; /* Read comment at zout_buffer declaration for an explanation to this. */ TxIntrSB_zout.sw_len = 1; TxIntrSB_zout.next = 0; TxIntrSB_zout.buf = virt_to_phys(&zout_buffer[0]); TxIntrSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) | IO_STATE(USB_SB_command, tt, zout) | IO_STATE(USB_SB_command, full, yes) | IO_STATE(USB_SB_command, eot, yes) | IO_STATE(USB_SB_command, eol, yes)); for (i = 0; i < (MAX_INTR_INTERVAL - 1); i++) { CHECK_ALIGN(&TxIntrEPList[i]); TxIntrEPList[i].hw_len = 0; TxIntrEPList[i].command = (IO_STATE(USB_EP_command, eof, yes) | IO_STATE(USB_EP_command, enable, yes) | IO_FIELD(USB_EP_command, epid, INVALID_EPID)); TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout); TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[i + 1]); } CHECK_ALIGN(&TxIntrEPList[i]); TxIntrEPList[i].hw_len = 0; TxIntrEPList[i].command = (IO_STATE(USB_EP_command, eof, yes) | IO_STATE(USB_EP_command, eol, yes) | IO_STATE(USB_EP_command, enable, yes) | IO_FIELD(USB_EP_command, epid, INVALID_EPID)); TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout); TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[0]); *R_DMA_CH8_SUB2_EP = virt_to_phys(&TxIntrEPList[0]); *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start); DBFEXIT; } static void init_tx_isoc_ep(void) { int i; DBFENTER; /* Read comment at zout_buffer declaration for an explanation to this. */ TxIsocSB_zout.sw_len = 1; TxIsocSB_zout.next = 0; TxIsocSB_zout.buf = virt_to_phys(&zout_buffer[0]); TxIsocSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) | IO_STATE(USB_SB_command, tt, zout) | IO_STATE(USB_SB_command, full, yes) | IO_STATE(USB_SB_command, eot, yes) | IO_STATE(USB_SB_command, eol, yes)); /* The last isochronous EP descriptor is a dummy. */ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { CHECK_ALIGN(&TxIsocEPList[i]); TxIsocEPList[i].hw_len = 0; TxIsocEPList[i].command = IO_FIELD(USB_EP_command, epid, i); TxIsocEPList[i].sub = 0; TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[i + 1]); } CHECK_ALIGN(&TxIsocEPList[i]); TxIsocEPList[i].hw_len = 0; /* Must enable the last EP descr to get eof interrupt. */ TxIsocEPList[i].command = (IO_STATE(USB_EP_command, enable, yes) | IO_STATE(USB_EP_command, eof, yes) | IO_STATE(USB_EP_command, eol, yes) | IO_FIELD(USB_EP_command, epid, INVALID_EPID)); TxIsocEPList[i].sub = virt_to_phys(&TxIsocSB_zout); TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[0]); *R_DMA_CH8_SUB3_EP = virt_to_phys(&TxIsocEPList[0]); *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start); DBFEXIT; } static void etrax_usb_unlink_intr_urb(struct urb *urb) { volatile USB_EP_Desc_t *first_ep; /* First EP in the list. */ volatile USB_EP_Desc_t *curr_ep; /* Current EP, the iterator. */ volatile USB_EP_Desc_t *next_ep; /* The EP after current. */ volatile USB_EP_Desc_t *unlink_ep; /* The one we should remove from the list. */ int epid; /* Read 8.8.4 in Designer's Reference, "Removing an EP Descriptor from the List". */ DBFENTER; epid = ((etrax_urb_priv_t *)urb->hcpriv)->epid; first_ep = &TxIntrEPList[0]; curr_ep = first_ep; /* Note that this loop removes all EP descriptors with this epid. This assumes that all EP descriptors belong to the one and only urb for this epid. */ do { next_ep = (USB_EP_Desc_t *)phys_to_virt(curr_ep->next); if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) { dbg_intr("Found EP to unlink for epid %d", epid); /* This is the one we should unlink. */ unlink_ep = next_ep; /* Actually unlink the EP from the DMA list. */ curr_ep->next = unlink_ep->next; /* Wait until the DMA is no longer at this descriptor. */ while (*R_DMA_CH8_SUB2_EP == virt_to_phys(unlink_ep)); /* Now we are free to remove it and its SB descriptor. Note that it is assumed here that there is only one sb in the sb list for this ep. */ kmem_cache_free(usb_desc_cache, phys_to_virt(unlink_ep->sub)); kmem_cache_free(usb_desc_cache, (USB_EP_Desc_t *)unlink_ep); } curr_ep = phys_to_virt(curr_ep->next); } while (curr_ep != first_ep); urb->hcpriv = NULL; } void etrax_usb_do_intr_recover(int epid) { USB_EP_Desc_t *first_ep, *tmp_ep; DBFENTER; first_ep = (USB_EP_Desc_t *)phys_to_virt(*R_DMA_CH8_SUB2_EP); tmp_ep = first_ep; /* What this does is simply to walk the list of interrupt ep descriptors and enable those that are disabled. */ do { if (IO_EXTRACT(USB_EP_command, epid, tmp_ep->command) == epid && !(tmp_ep->command & IO_MASK(USB_EP_command, enable))) { tmp_ep->command |= IO_STATE(USB_EP_command, enable, yes); } tmp_ep = (USB_EP_Desc_t *)phys_to_virt(tmp_ep->next); } while (tmp_ep != first_ep); DBFEXIT; } static int etrax_rh_unlink_urb (struct urb *urb) { etrax_hc_t *hc; DBFENTER; hc = urb->dev->bus->hcpriv; if (hc->rh.urb == urb) { hc->rh.send = 0; del_timer(&hc->rh.rh_int_timer); } DBFEXIT; return 0; } static void etrax_rh_send_irq(struct urb *urb) { __u16 data = 0; etrax_hc_t *hc = urb->dev->bus->hcpriv; DBFENTER; /* dbg_rh("R_USB_FM_NUMBER : 0x%08X", *R_USB_FM_NUMBER); dbg_rh("R_USB_FM_REMAINING: 0x%08X", *R_USB_FM_REMAINING); */ data |= (hc->rh.wPortChange_1) ? (1 << 1) : 0; data |= (hc->rh.wPortChange_2) ? (1 << 2) : 0; *((__u16 *)urb->transfer_buffer) = cpu_to_le16(data); /* FIXME: Why is actual_length set to 1 when data is 2 bytes? Since only 1 byte is used, why not declare data as __u8? */ urb->actual_length = 1; urb->status = 0; if (hc->rh.send && urb->complete) { dbg_rh("wPortChange_1: 0x%04X", hc->rh.wPortChange_1); dbg_rh("wPortChange_2: 0x%04X", hc->rh.wPortChange_2); urb->complete(urb, NULL); } DBFEXIT; } static void etrax_rh_init_int_timer(struct urb *urb) { etrax_hc_t *hc; DBFENTER; hc = urb->dev->bus->hcpriv; hc->rh.interval = urb->interval; init_timer(&hc->rh.rh_int_timer); hc->rh.rh_int_timer.function = etrax_rh_int_timer_do; hc->rh.rh_int_timer.data = (unsigned long)urb; /* FIXME: Is the jiffies resolution enough? All intervals < 10 ms will be mapped to 0, and the rest to the nearest lower 10 ms. */ hc->rh.rh_int_timer.expires = jiffies + ((HZ * hc->rh.interval) / 1000); add_timer(&hc->rh.rh_int_timer); DBFEXIT; } static void etrax_rh_int_timer_do(unsigned long ptr) { struct urb *urb; etrax_hc_t *hc; DBFENTER; urb = (struct urb*)ptr; hc = urb->dev->bus->hcpriv; if (hc->rh.send) { etrax_rh_send_irq(urb); } DBFEXIT; } static int etrax_usb_setup_epid(struct urb *urb) { int epid; char devnum, endpoint, out_traffic, slow; int maxlen; unsigned long flags; DBFENTER; epid = etrax_usb_lookup_epid(urb); if ((epid != -1)){ /* An epid that fits this urb has been found. */ DBFEXIT; return epid; } /* We must find and initiate a new epid for this urb. */ epid = etrax_usb_allocate_epid(); if (epid == -1) { /* Failed to allocate a new epid. */ DBFEXIT; return epid; } /* We now have a new epid to use. Initiate it. */ set_bit(epid, (void *)&epid_usage_bitmask); devnum = usb_pipedevice(urb->pipe); endpoint = usb_pipeendpoint(urb->pipe); slow = usb_pipeslow(urb->pipe); maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { /* We want both IN and OUT control traffic to be put on the same EP/SB list. */ out_traffic = 1; } else { out_traffic = usb_pipeout(urb->pipe); } save_flags(flags); cli(); *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); nop(); if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { *R_USB_EPT_DATA_ISO = IO_STATE(R_USB_EPT_DATA_ISO, valid, yes) | /* FIXME: Change any to the actual port? */ IO_STATE(R_USB_EPT_DATA_ISO, port, any) | IO_FIELD(R_USB_EPT_DATA_ISO, max_len, maxlen) | IO_FIELD(R_USB_EPT_DATA_ISO, ep, endpoint) | IO_FIELD(R_USB_EPT_DATA_ISO, dev, devnum); } else { *R_USB_EPT_DATA = IO_STATE(R_USB_EPT_DATA, valid, yes) | IO_FIELD(R_USB_EPT_DATA, low_speed, slow) | /* FIXME: Change any to the actual port? */ IO_STATE(R_USB_EPT_DATA, port, any) | IO_FIELD(R_USB_EPT_DATA, max_len, maxlen) | IO_FIELD(R_USB_EPT_DATA, ep, endpoint) | IO_FIELD(R_USB_EPT_DATA, dev, devnum); } restore_flags(flags); if (out_traffic) { set_bit(epid, (void *)&epid_out_traffic); } else { clear_bit(epid, (void *)&epid_out_traffic); } dbg_epid("Setting up epid %d with devnum %d, endpoint %d and max_len %d (%s)", epid, devnum, endpoint, maxlen, out_traffic ? "OUT" : "IN"); DBFEXIT; return epid; } static void etrax_usb_free_epid(int epid) { unsigned long flags; DBFENTER; if (!test_bit(epid, (void *)&epid_usage_bitmask)) { warn("Trying to free unused epid %d", epid); DBFEXIT; return; } save_flags(flags); cli(); *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); nop(); while (*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)); /* This will, among other things, set the valid field to 0. */ *R_USB_EPT_DATA = 0; restore_flags(flags); clear_bit(epid, (void *)&epid_usage_bitmask); dbg_epid("Freed epid %d", epid); DBFEXIT; } static int etrax_usb_lookup_epid(struct urb *urb) { int i; __u32 data; char devnum, endpoint, slow, out_traffic; int maxlen; unsigned long flags; DBFENTER; devnum = usb_pipedevice(urb->pipe); endpoint = usb_pipeendpoint(urb->pipe); slow = usb_pipeslow(urb->pipe); maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { /* We want both IN and OUT control traffic to be put on the same EP/SB list. */ out_traffic = 1; } else { out_traffic = usb_pipeout(urb->pipe); } /* Step through att epids. */ for (i = 0; i < NBR_OF_EPIDS; i++) { if (test_bit(i, (void *)&epid_usage_bitmask) && test_bit(i, (void *)&epid_out_traffic) == out_traffic) { save_flags(flags); cli(); *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, i); nop(); if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { data = *R_USB_EPT_DATA_ISO; restore_flags(flags); if ((IO_MASK(R_USB_EPT_DATA_ISO, valid) & data) && (IO_EXTRACT(R_USB_EPT_DATA_ISO, dev, data) == devnum) && (IO_EXTRACT(R_USB_EPT_DATA_ISO, ep, data) == endpoint) && (IO_EXTRACT(R_USB_EPT_DATA_ISO, max_len, data) == maxlen)) { dbg_epid("Found epid %d for devnum %d, endpoint %d (%s)", i, devnum, endpoint, out_traffic ? "OUT" : "IN"); DBFEXIT; return i; } } else { data = *R_USB_EPT_DATA; restore_flags(flags); if ((IO_MASK(R_USB_EPT_DATA, valid) & data) && (IO_EXTRACT(R_USB_EPT_DATA, dev, data) == devnum) && (IO_EXTRACT(R_USB_EPT_DATA, ep, data) == endpoint) && (IO_EXTRACT(R_USB_EPT_DATA, low_speed, data) == slow) && (IO_EXTRACT(R_USB_EPT_DATA, max_len, data) == maxlen)) { dbg_epid("Found epid %d for devnum %d, endpoint %d (%s)", i, devnum, endpoint, out_traffic ? "OUT" : "IN"); DBFEXIT; return i; } } } } DBFEXIT; return -1; } static int etrax_usb_allocate_epid(void) { int i; DBFENTER; for (i = 0; i < NBR_OF_EPIDS; i++) { if (!test_bit(i, (void *)&epid_usage_bitmask)) { dbg_epid("Found free epid %d", i); DBFEXIT; return i; } } dbg_epid("Found no free epids"); DBFEXIT; return -1; } static int etrax_usb_submit_urb(struct urb *urb, unsigned mem_flags) { etrax_hc_t *hc; int ret = -EINVAL; DBFENTER; if (!urb->dev || !urb->dev->bus) { return -ENODEV; } if (usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)) <= 0) { info("Submit urb to pipe with maxpacketlen 0, pipe 0x%X\n", urb->pipe); return -EMSGSIZE; } if (urb->timeout) { /* FIXME. */ warn("urb->timeout specified, ignoring."); } hc = (etrax_hc_t*)urb->dev->bus->hcpriv; if (usb_pipedevice(urb->pipe) == hc->rh.devnum) { /* This request is for the Virtual Root Hub. */ ret = etrax_rh_submit_urb(urb); } else if (usb_pipetype(urb->pipe) == PIPE_BULK) { ret = etrax_usb_submit_bulk_urb(urb); } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { ret = etrax_usb_submit_ctrl_urb(urb); } else if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { int bustime; if (urb->bandwidth == 0) { bustime = usb_check_bandwidth(urb->dev, urb); if (bustime < 0) { ret = bustime; } else { ret = etrax_usb_submit_intr_urb(urb); if (ret == 0) usb_claim_bandwidth(urb->dev, urb, bustime, 0); } } else { /* Bandwidth already set. */ ret = etrax_usb_submit_intr_urb(urb); } } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { int bustime; if (urb->bandwidth == 0) { bustime = usb_check_bandwidth(urb->dev, urb); if (bustime < 0) { ret = bustime; } else { ret = etrax_usb_submit_isoc_urb(urb); if (ret == 0) usb_claim_bandwidth(urb->dev, urb, bustime, 0); } } else { /* Bandwidth already set. */ ret = etrax_usb_submit_isoc_urb(urb); } } DBFEXIT; if (ret != 0) printk("Submit URB error %d\n", ret); return ret; } static int etrax_usb_unlink_urb(struct urb *urb, int status) { etrax_hc_t *hc; etrax_urb_priv_t *urb_priv; int epid; unsigned int flags; DBFENTER; if (!urb) { return -EINVAL; } /* Disable interrupts here since a descriptor interrupt for the isoc epid will modify the sb list. This could possibly be done more granular, but unlink_urb should not be used frequently anyway. */ save_flags(flags); cli(); if (!urb->dev || !urb->dev->bus) { restore_flags(flags); return -ENODEV; } if (!urb->hcpriv) { /* This happens if a device driver calls unlink on an urb that was never submitted (lazy driver) or if the urb was completed while unlink was being called. */ restore_flags(flags); return 0; } if (urb->transfer_flags & URB_ASYNC_UNLINK) { /* FIXME. */ /* If URB_ASYNC_UNLINK is set: unlink move to a separate urb list call complete at next sof with ECONNRESET If not: wait 1 ms unlink call complete with ENOENT */ warn("URB_ASYNC_UNLINK set, ignoring."); } /* One might think that urb->status = -EINPROGRESS would be a requirement for unlinking, but that doesn't work for interrupt and isochronous traffic since they are completed repeatedly, and urb->status is set then. That may in itself be a bug though. */ hc = urb->dev->bus->hcpriv; urb_priv = (etrax_urb_priv_t *)urb->hcpriv; epid = urb_priv->epid; /* Set the urb status (synchronous unlink). */ urb->status = -ENOENT; urb_priv->urb_state = UNLINK; if (usb_pipedevice(urb->pipe) == hc->rh.devnum) { int ret; ret = etrax_rh_unlink_urb(urb); DBFEXIT; restore_flags(flags); return ret; } else if (usb_pipetype(urb->pipe) == PIPE_BULK) { dbg_bulk("Unlink of bulk urb (0x%lx)", (unsigned long)urb); if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) { /* The EP was enabled, disable it and wait. */ TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); /* Ah, the luxury of busy-wait. */ while (*R_DMA_CH8_SUB0_EP == virt_to_phys(&TxBulkEPList[epid])); } /* Kicking dummy list out of the party. */ TxBulkEPList[epid].next = virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]); } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { dbg_ctrl("Unlink of ctrl urb (0x%lx)", (unsigned long)urb); if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) { /* The EP was enabled, disable it and wait. */ TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); /* Ah, the luxury of busy-wait. */ while (*R_DMA_CH8_SUB1_EP == virt_to_phys(&TxCtrlEPList[epid])); } } else if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { dbg_intr("Unlink of intr urb (0x%lx)", (unsigned long)urb); /* Separate function because it's a tad more complicated. */ etrax_usb_unlink_intr_urb(urb); } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { dbg_isoc("Unlink of isoc urb (0x%lx)", (unsigned long)urb); if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) { /* The EP was enabled, disable it and wait. */ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); /* Ah, the luxury of busy-wait. */ while (*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])); } } /* Note that we need to remove the urb from the urb list *before* removing its SB descriptors. (This means that the isoc eof handler might get a null urb when we are unlinking the last urb.) */ if (usb_pipetype(urb->pipe) == PIPE_BULK) { urb_list_del(urb, epid); TxBulkEPList[epid].sub = 0; etrax_remove_from_sb_list(urb); } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { urb_list_del(urb, epid); TxCtrlEPList[epid].sub = 0; etrax_remove_from_sb_list(urb); } else if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { urb_list_del(urb, epid); /* Sanity check (should never happen). */ assert(urb_list_empty(epid)); /* Release allocated bandwidth. */ usb_release_bandwidth(urb->dev, urb, 0); } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { if (usb_pipeout(urb->pipe)) { USB_SB_Desc_t *iter_sb, *prev_sb, *next_sb; if (__urb_list_entry(urb, epid)) { urb_list_del(urb, epid); iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0; prev_sb = 0; while (iter_sb && (iter_sb != urb_priv->first_sb)) { prev_sb = iter_sb; iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; } if (iter_sb == 0) { /* Unlink of the URB currently being transmitted. */ prev_sb = 0; iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0; } while (iter_sb && (iter_sb != urb_priv->last_sb)) { iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; } if (iter_sb) { next_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; } else { /* This should only happen if the DMA has completed processing the SB list for this EP while interrupts are disabled. */ dbg_isoc("Isoc urb not found, already sent?"); next_sb = 0; } if (prev_sb) { prev_sb->next = next_sb ? virt_to_phys(next_sb) : 0; } else { TxIsocEPList[epid].sub = next_sb ? virt_to_phys(next_sb) : 0; } etrax_remove_from_sb_list(urb); if (urb_list_empty(epid)) { TxIsocEPList[epid].sub = 0; dbg_isoc("Last isoc out urb epid %d", epid); } else if (next_sb || prev_sb) { dbg_isoc("Re-enable isoc out epid %d", epid); TxIsocEPList[epid].hw_len = 0; TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); } else { TxIsocEPList[epid].sub = 0; dbg_isoc("URB list non-empty and no SB list, EP disabled"); } } else { dbg_isoc("Urb 0x%p not found, completed already?", urb); } } else { urb_list_del(urb, epid); /* For in traffic there is only one SB descriptor for each EP even though there may be several urbs (all urbs point at the same SB). */ if (urb_list_empty(epid)) { /* No more urbs, remove the SB. */ TxIsocEPList[epid].sub = 0; etrax_remove_from_sb_list(urb); } else { TxIsocEPList[epid].hw_len = 0; TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); } } /* Release allocated bandwidth. */ usb_release_bandwidth(urb->dev, urb, 1); } /* Free the epid if urb list is empty. */ if (urb_list_empty(epid)) { etrax_usb_free_epid(epid); } restore_flags(flags); /* Must be done before calling completion handler. */ kfree(urb_priv); urb->hcpriv = 0; if (urb->complete) { urb->complete(urb, NULL); } DBFEXIT; return 0; } static int etrax_usb_get_frame_number(struct usb_device *usb_dev) { DBFENTER; DBFEXIT; return (*R_USB_FM_NUMBER & 0x7ff); } static irqreturn_t etrax_usb_tx_interrupt(int irq, void *vhc, struct pt_regs *regs) { DBFENTER; /* This interrupt handler could be used when unlinking EP descriptors. */ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub0_descr)) { USB_EP_Desc_t *ep; //dbg_bulk("dma8_sub0_descr (BULK) intr."); /* It should be safe clearing the interrupt here, since we don't expect to get a new one until we restart the bulk channel. */ *R_DMA_CH8_SUB0_CLR_INTR = IO_STATE(R_DMA_CH8_SUB0_CLR_INTR, clr_descr, do); /* Wait while the DMA is running (though we don't expect it to be). */ while (*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd)); /* Advance the DMA to the next EP descriptor. */ ep = (USB_EP_Desc_t *)phys_to_virt(*R_DMA_CH8_SUB0_EP); //dbg_bulk("descr intr: DMA is at 0x%lx", (unsigned long)ep); /* ep->next is already a physical address; no need for a virt_to_phys. */ *R_DMA_CH8_SUB0_EP = ep->next; /* Start the DMA bulk channel again. */ *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); } if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub1_descr)) { struct urb *urb; int epid; etrax_urb_priv_t *urb_priv; unsigned long int flags; dbg_ctrl("dma8_sub1_descr (CTRL) intr."); *R_DMA_CH8_SUB1_CLR_INTR = IO_STATE(R_DMA_CH8_SUB1_CLR_INTR, clr_descr, do); /* The complete callback gets called so we cli. */ save_flags(flags); cli(); for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { if ((TxCtrlEPList[epid].sub == 0) || (epid == DUMMY_EPID) || (epid == INVALID_EPID)) { /* Nothing here to see. */ continue; } /* Get the first urb (if any). */ urb = urb_list_first(epid); if (urb) { /* Sanity check. */ assert(usb_pipetype(urb->pipe) == PIPE_CONTROL); urb_priv = (etrax_urb_priv_t *)urb->hcpriv; assert(urb_priv); if (urb_priv->urb_state == WAITING_FOR_DESCR_INTR) { assert(!(TxCtrlEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable))); etrax_usb_complete_urb(urb, 0); } } } restore_flags(flags); } if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub2_descr)) { dbg_intr("dma8_sub2_descr (INTR) intr."); *R_DMA_CH8_SUB2_CLR_INTR = IO_STATE(R_DMA_CH8_SUB2_CLR_INTR, clr_descr, do); } if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub3_descr)) { struct urb *urb; int epid; int epid_done; etrax_urb_priv_t *urb_priv; USB_SB_Desc_t *sb_desc; usb_isoc_complete_data_t *comp_data = NULL; /* One or more isoc out transfers are done. */ dbg_isoc("dma8_sub3_descr (ISOC) intr."); /* For each isoc out EP search for the first sb_desc with the intr flag set. This descriptor must be the last packet from an URB. Then traverse the URB list for the EP until the URB with urb_priv->last_sb matching the intr-marked sb_desc is found. All URBs before this have been sent. */ for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { /* Skip past epids with no SB lists, epids used for in traffic, and special (dummy, invalid) epids. */ if ((TxIsocEPList[epid].sub == 0) || (test_bit(epid, (void *)&epid_out_traffic) == 0) || (epid == DUMMY_EPID) || (epid == INVALID_EPID)) { /* Nothing here to see. */ continue; } sb_desc = phys_to_virt(TxIsocEPList[epid].sub); /* Find the last descriptor of the currently active URB for this ep. This is the first descriptor in the sub list marked for a descriptor interrupt. */ while (sb_desc && !IO_EXTRACT(USB_SB_command, intr, sb_desc->command)) { sb_desc = sb_desc->next ? phys_to_virt(sb_desc->next) : 0; } assert(sb_desc); dbg_isoc("Check epid %d, sub 0x%p, SB 0x%p", epid, phys_to_virt(TxIsocEPList[epid].sub), sb_desc); epid_done = 0; /* Get the first urb (if any). */ urb = urb_list_first(epid); assert(urb); while (urb && !epid_done) { /* Sanity check. */ assert(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS); if (!usb_pipeout(urb->pipe)) { /* descr interrupts are generated only for out pipes. */ epid_done = 1; continue; } urb_priv = (etrax_urb_priv_t *)urb->hcpriv; assert(urb_priv); if (sb_desc != urb_priv->last_sb) { /* This urb has been sent. */ dbg_isoc("out URB 0x%p sent", urb); urb_priv->urb_state = TRANSFER_DONE; } else if ((sb_desc == urb_priv->last_sb) && !(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) { assert((sb_desc->command & IO_MASK(USB_SB_command, eol)) == IO_STATE(USB_SB_command, eol, yes)); assert(sb_desc->next == 0); dbg_isoc("out URB 0x%p last in list, epid disabled", urb); TxIsocEPList[epid].sub = 0; TxIsocEPList[epid].hw_len = 0; urb_priv->urb_state = TRANSFER_DONE; epid_done = 1; } else { epid_done = 1; } if (!epid_done) { urb = urb_list_next(urb, epid); } } } *R_DMA_CH8_SUB3_CLR_INTR = IO_STATE(R_DMA_CH8_SUB3_CLR_INTR, clr_descr, do); comp_data = (usb_isoc_complete_data_t*)kmem_cache_alloc(isoc_compl_cache, SLAB_ATOMIC); assert(comp_data != NULL); INIT_WORK(&comp_data->usb_bh, etrax_usb_isoc_descr_interrupt_bottom_half, comp_data); schedule_work(&comp_data->usb_bh); } DBFEXIT; return IRQ_HANDLED; } static void etrax_usb_isoc_descr_interrupt_bottom_half(void *data) { usb_isoc_complete_data_t *comp_data = (usb_isoc_complete_data_t*)data; struct urb *urb; int epid; int epid_done; etrax_urb_priv_t *urb_priv; DBFENTER; dbg_isoc("dma8_sub3_descr (ISOC) bottom half."); for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { unsigned long flags; save_flags(flags); cli(); epid_done = 0; /* The descriptor interrupt handler has marked all transmitted isoch. out URBs with TRANSFER_DONE. Now we traverse all epids and for all that have isoch. out traffic traverse its URB list and complete the transmitted URB. */ while (!epid_done) { /* Get the first urb (if any). */ urb = urb_list_first(epid); if (urb == 0) { epid_done = 1; continue; } if (usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) { epid_done = 1; continue; } if (!usb_pipeout(urb->pipe)) { /* descr interrupts are generated only for out pipes. */ epid_done = 1; continue; } dbg_isoc("Check epid %d, SB 0x%p", epid, (char*)TxIsocEPList[epid].sub); urb_priv = (etrax_urb_priv_t *)urb->hcpriv; assert(urb_priv); if (urb_priv->urb_state == TRANSFER_DONE) { int i; struct usb_iso_packet_descriptor *packet; /* This urb has been sent. */ dbg_isoc("Completing isoc out URB 0x%p", urb); for (i = 0; i < urb->number_of_packets; i++) { packet = &urb->iso_frame_desc[i]; packet->status = 0; packet->actual_length = packet->length; } etrax_usb_complete_isoc_urb(urb, 0); if (urb_list_empty(epid)) { etrax_usb_free_epid(epid); epid_done = 1; } } else { epid_done = 1; } } restore_flags(flags); } kmem_cache_free(isoc_compl_cache, comp_data); DBFEXIT; } static irqreturn_t etrax_usb_rx_interrupt(int irq, void *vhc, struct pt_regs *regs) { struct urb *urb; etrax_urb_priv_t *urb_priv; int epid = 0; unsigned long flags; /* Isoc diagnostics. */ static int curr_fm = 0; static int prev_fm = 0; DBFENTER; /* Clear this interrupt. */ *R_DMA_CH9_CLR_INTR = IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop, do); /* Note that this while loop assumes that all packets span only one rx descriptor. */ /* The reason we cli here is that we call the driver's callback functions. */ save_flags(flags); cli(); while (myNextRxDesc->status & IO_MASK(USB_IN_status, eop)) { epid = IO_EXTRACT(USB_IN_status, epid, myNextRxDesc->status); urb = urb_list_first(epid); //printk("eop for epid %d, first urb 0x%lx\n", epid, (unsigned long)urb); if (!urb) { err("No urb for epid %d in rx interrupt", epid); __dump_ept_data(epid); goto skip_out; } /* Note that we cannot indescriminately assert(usb_pipein(urb->pipe)) since ctrl pipes are not. */ if (myNextRxDesc->status & IO_MASK(USB_IN_status, error)) { __u32 r_usb_ept_data; int no_error = 0; assert(test_bit(epid, (void *)&epid_usage_bitmask)); *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); nop(); if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { r_usb_ept_data = *R_USB_EPT_DATA_ISO; if ((r_usb_ept_data & IO_MASK(R_USB_EPT_DATA_ISO, valid)) && (IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data) == 0) && (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata))) { /* Not an error, just a failure to receive an expected iso in packet in this frame. This is not documented in the designers reference. */ no_error++; } else { warn("R_USB_EPT_DATA_ISO for epid %d = 0x%x", epid, r_usb_ept_data); } } else { r_usb_ept_data = *R_USB_EPT_DATA; warn("R_USB_EPT_DATA for epid %d = 0x%x", epid, r_usb_ept_data); } if (!no_error){ warn("error in rx desc->status, epid %d, first urb = 0x%lx", epid, (unsigned long)urb); __dump_in_desc(myNextRxDesc); warn("R_USB_STATUS = 0x%x", *R_USB_STATUS); /* Check that ept was disabled when error occurred. */ switch (usb_pipetype(urb->pipe)) { case PIPE_BULK: assert(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable))); break; case PIPE_CONTROL: assert(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable))); break; case PIPE_INTERRUPT: assert(!(TxIntrEPList[epid].command & IO_MASK(USB_EP_command, enable))); break; case PIPE_ISOCHRONOUS: assert(!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))); break; default: warn("etrax_usb_rx_interrupt: bad pipetype %d in urb 0x%p", usb_pipetype(urb->pipe), urb); } etrax_usb_complete_urb(urb, -EPROTO); goto skip_out; } } urb_priv = (etrax_urb_priv_t *)urb->hcpriv; assert(urb_priv); if ((usb_pipetype(urb->pipe) == PIPE_BULK) || (usb_pipetype(urb->pipe) == PIPE_CONTROL) || (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) { if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) { /* We get nodata for empty data transactions, and the rx descriptor's hw_len field is not valid in that case. No data to copy in other words. */ } else { /* Make sure the data fits in the buffer. */ assert(urb_priv->rx_offset + myNextRxDesc->hw_len <= urb->transfer_buffer_length); memcpy(urb->transfer_buffer + urb_priv->rx_offset, phys_to_virt(myNextRxDesc->buf), myNextRxDesc->hw_len); urb_priv->rx_offset += myNextRxDesc->hw_len; } if (myNextRxDesc->status & IO_MASK(USB_IN_status, eot)) { if ((usb_pipetype(urb->pipe) == PIPE_CONTROL) && ((TxCtrlEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable)) == IO_STATE(USB_EP_command, enable, yes))) { /* The EP is still enabled, so the OUT packet used to ack the in data is probably not processed yet. If the EP sub pointer has not moved beyond urb_priv->last_sb mark it for a descriptor interrupt and complete the urb in the descriptor interrupt handler. */ USB_SB_Desc_t *sub = TxCtrlEPList[urb_priv->epid].sub ? phys_to_virt(TxCtrlEPList[urb_priv->epid].sub) : 0; while ((sub != NULL) && (sub != urb_priv->last_sb)) { sub = sub->next ? phys_to_virt(sub->next) : 0; } if (sub != NULL) { /* The urb has not been fully processed. */ urb_priv->urb_state = WAITING_FOR_DESCR_INTR; } else { warn("(CTRL) epid enabled and urb (0x%p) processed, ep->sub=0x%p", urb, (char*)TxCtrlEPList[urb_priv->epid].sub); etrax_usb_complete_urb(urb, 0); } } else { etrax_usb_complete_urb(urb, 0); } } } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { struct usb_iso_packet_descriptor *packet; if (urb_priv->urb_state == UNLINK) { info("Ignoring rx data for urb being unlinked."); goto skip_out; } else if (urb_priv->urb_state == NOT_STARTED) { info("What? Got rx data for urb that isn't started?"); goto skip_out; } packet = &urb->iso_frame_desc[urb_priv->isoc_packet_counter]; packet->status = 0; if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) { /* We get nodata for empty data transactions, and the rx descriptor's hw_len field is not valid in that case. We copy 0 bytes however to stay in synch. */ packet->actual_length = 0; } else { packet->actual_length = myNextRxDesc->hw_len; /* Make sure the data fits in the buffer. */ assert(packet->actual_length <= packet->length); memcpy(urb->transfer_buffer + packet->offset, phys_to_virt(myNextRxDesc->buf), packet->actual_length); } /* Increment the packet counter. */ urb_priv->isoc_packet_counter++; /* Note that we don't care about the eot field in the rx descriptor's status. It will always be set for isoc traffic. */ if (urb->number_of_packets == urb_priv->isoc_packet_counter) { /* Out-of-synch diagnostics. */ curr_fm = (*R_USB_FM_NUMBER & 0x7ff); if (((prev_fm + urb_priv->isoc_packet_counter) % (0x7ff + 1)) != curr_fm) { /* This test is wrong, if there is more than one isoc in endpoint active it will always calculate wrong since prev_fm is shared by all endpoints. FIXME Make this check per URB using urb->start_frame. */ dbg_isoc("Out of synch? Previous frame = %d, current frame = %d", prev_fm, curr_fm); } prev_fm = curr_fm; /* Complete the urb with status OK. */ etrax_usb_complete_isoc_urb(urb, 0); } } skip_out: /* DMA IN cache bug. Flush the DMA IN buffer from the cache. (struct etrax_dma_descr has the same layout as USB_IN_Desc for the relevant fields.) */ prepare_rx_descriptor((struct etrax_dma_descr*)myNextRxDesc); myPrevRxDesc = myNextRxDesc; myPrevRxDesc->command |= IO_MASK(USB_IN_command, eol); myLastRxDesc->command &= ~IO_MASK(USB_IN_command, eol); myLastRxDesc = myPrevRxDesc; myNextRxDesc->status = 0; myNextRxDesc = phys_to_virt(myNextRxDesc->next); } restore_flags(flags); DBFEXIT; return IRQ_HANDLED; } /* This function will unlink the SB descriptors associated with this urb. */ static int etrax_remove_from_sb_list(struct urb *urb) { USB_SB_Desc_t *next_sb, *first_sb, *last_sb; etrax_urb_priv_t *urb_priv; int i = 0; DBFENTER; urb_priv = (etrax_urb_priv_t *)urb->hcpriv; assert(urb_priv); /* Just a sanity check. Since we don't fiddle with the DMA list the EP descriptor doesn't really need to be disabled, it's just that we expect it to be. */ if (usb_pipetype(urb->pipe) == PIPE_BULK) { assert(!(TxBulkEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable))); } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { assert(!(TxCtrlEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable))); } first_sb = urb_priv->first_sb; last_sb = urb_priv->last_sb; assert(first_sb); assert(last_sb); while (first_sb != last_sb) { next_sb = (USB_SB_Desc_t *)phys_to_virt(first_sb->next); kmem_cache_free(usb_desc_cache, first_sb); first_sb = next_sb; i++; } kmem_cache_free(usb_desc_cache, last_sb); i++; dbg_sb("%d SB descriptors freed", i); /* Compare i with urb->number_of_packets for Isoc traffic. Should be same when calling unlink_urb */ DBFEXIT; return i; } static int etrax_usb_submit_bulk_urb(struct urb *urb) { int epid; int empty; unsigned long flags; etrax_urb_priv_t *urb_priv; DBFENTER; /* Epid allocation, empty check and list add must be protected. Read about this in etrax_usb_submit_ctrl_urb. */ spin_lock_irqsave(&urb_list_lock, flags); epid = etrax_usb_setup_epid(urb); if (epid == -1) { DBFEXIT; spin_unlock_irqrestore(&urb_list_lock, flags); return -ENOMEM; } empty = urb_list_empty(epid); urb_list_add(urb, epid); spin_unlock_irqrestore(&urb_list_lock, flags); dbg_bulk("Adding bulk %s urb 0x%lx to %s list, epid %d", usb_pipein(urb->pipe) ? "IN" : "OUT", (unsigned long)urb, empty ? "empty" : "", epid); /* Mark the urb as being in progress. */ urb->status = -EINPROGRESS; /* Setup the hcpriv data. */ urb_priv = kmalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG); assert(urb_priv != NULL); /* This sets rx_offset to 0. */ memset(urb_priv, 0, sizeof(etrax_urb_priv_t)); urb_priv->urb_state = NOT_STARTED; urb->hcpriv = urb_priv; if (empty) { etrax_usb_add_to_bulk_sb_list(urb, epid); } DBFEXIT; return 0; } static void etrax_usb_add_to_bulk_sb_list(struct urb *urb, int epid) { USB_SB_Desc_t *sb_desc; etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; unsigned long flags; char maxlen; DBFENTER; dbg_bulk("etrax_usb_add_to_bulk_sb_list, urb 0x%lx", (unsigned long)urb); maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); sb_desc = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); assert(sb_desc != NULL); memset(sb_desc, 0, sizeof(USB_SB_Desc_t)); if (usb_pipeout(urb->pipe)) { dbg_bulk("Grabbing bulk OUT, urb 0x%lx, epid %d", (unsigned long)urb, epid); /* This is probably a sanity check of the bulk transaction length not being larger than 64 kB. */ if (urb->transfer_buffer_length > 0xffff) { panic("urb->transfer_buffer_length > 0xffff"); } sb_desc->sw_len = urb->transfer_buffer_length; /* The rem field is don't care if it's not a full-length transfer, so setting it shouldn't hurt. Also, rem isn't used for OUT traffic. */ sb_desc->command = (IO_FIELD(USB_SB_command, rem, 0) | IO_STATE(USB_SB_command, tt, out) | IO_STATE(USB_SB_command, eot, yes) | IO_STATE(USB_SB_command, eol, yes)); /* The full field is set to yes, even if we don't actually check that this is a full-length transfer (i.e., that transfer_buffer_length % maxlen = 0). Setting full prevents the USB controller from sending an empty packet in that case. However, if URB_ZERO_PACKET was set we want that. */ if (!(urb->transfer_flags & URB_ZERO_PACKET)) { sb_desc->command |= IO_STATE(USB_SB_command, full, yes); } sb_desc->buf = virt_to_phys(urb->transfer_buffer); sb_desc->next = 0; } else if (usb_pipein(urb->pipe)) { dbg_bulk("Grabbing bulk IN, urb 0x%lx, epid %d", (unsigned long)urb, epid); sb_desc->sw_len = urb->transfer_buffer_length ? (urb->transfer_buffer_length - 1) / maxlen + 1 : 0; /* The rem field is don't care if it's not a full-length transfer, so setting it shouldn't hurt. */ sb_desc->command = (IO_FIELD(USB_SB_command, rem, urb->transfer_buffer_length % maxlen) | IO_STATE(USB_SB_command, tt, in) | IO_STATE(USB_SB_command, eot, yes) | IO_STATE(USB_SB_command, eol, yes)); sb_desc->buf = 0; sb_desc->next = 0; } urb_priv->first_sb = sb_desc; urb_priv->last_sb = sb_desc; urb_priv->epid = epid; urb->hcpriv = urb_priv; /* Reset toggle bits and reset error count. */ save_flags(flags); cli(); *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); nop(); /* FIXME: Is this a special case since the hold field is checked, or should we check hold in a lot of other cases as well? */ if (*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) { panic("Hold was set in %s", __FUNCTION__); } /* Reset error counters (regardless of which direction this traffic is). */ *R_USB_EPT_DATA &= ~(IO_MASK(R_USB_EPT_DATA, error_count_in) | IO_MASK(R_USB_EPT_DATA, error_count_out)); /* Software must preset the toggle bits. */ if (usb_pipeout(urb->pipe)) { char toggle = usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe)); *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_out); *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_out, toggle); } else { char toggle = usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe)); *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_in); *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_in, toggle); } /* Assert that the EP descriptor is disabled. */ assert(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable))); /* The reason we set the EP's sub pointer directly instead of walking the SB list and linking it last in the list is that we only have one active urb at a time (the rest are queued). */ /* Note that we cannot have interrupts running when we have set the SB descriptor but the EP is not yet enabled. If a bulk eot happens for another EP, we will find this EP disabled and with a SB != 0, which will make us think that it's done. */ TxBulkEPList[epid].sub = virt_to_phys(sb_desc); TxBulkEPList[epid].hw_len = 0; /* Note that we don't have to fill in the ep_id field since this was done when we allocated the EP descriptors in init_tx_bulk_ep. */ /* Check if the dummy list is already with us (if several urbs were queued). */ if (TxBulkEPList[epid].next != virt_to_phys(&TxBulkDummyEPList[epid][0])) { dbg_bulk("Inviting dummy list to the party for urb 0x%lx, epid %d", (unsigned long)urb, epid); /* The last EP in the dummy list already has its next pointer set to TxBulkEPList[epid].next. */ /* We don't need to check if the DMA is at this EP or not before changing the next pointer, since we will do it in one 32-bit write (EP descriptors are 32-bit aligned). */ TxBulkEPList[epid].next = virt_to_phys(&TxBulkDummyEPList[epid][0]); } /* Enable the EP descr. */ dbg_bulk("Enabling bulk EP for urb 0x%lx, epid %d", (unsigned long)urb, epid); TxBulkEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); /* Everything is set up, safe to enable interrupts again. */ restore_flags(flags); /* If the DMA bulk channel isn't running, we need to restart it if it has stopped at the last EP descriptor (DMA stopped because there was no more traffic) or if it has stopped at a dummy EP with the intr flag set (DMA stopped because we were too slow in inserting new traffic). */ if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) { USB_EP_Desc_t *ep; ep = (USB_EP_Desc_t *)phys_to_virt(*R_DMA_CH8_SUB0_EP); dbg_bulk("DMA channel not running in add"); dbg_bulk("DMA is at 0x%lx", (unsigned long)ep); if (*R_DMA_CH8_SUB0_EP == virt_to_phys(&TxBulkEPList[NBR_OF_EPIDS - 1]) || (ep->command & 0x8) >> 3) { *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); /* Update/restart the bulk start timer since we just started the channel. */ mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL); /* Update/restart the bulk eot timer since we just inserted traffic. */ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); } } DBFEXIT; } static void etrax_usb_complete_bulk_urb(struct urb *urb, int status) { etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; int epid = urb_priv->epid; unsigned long flags; DBFENTER; if (status) warn("Completing bulk urb with status %d.", status); dbg_bulk("Completing bulk urb 0x%lx for epid %d", (unsigned long)urb, epid); /* Update the urb list. */ urb_list_del(urb, epid); /* For an IN pipe, we always set the actual length, regardless of whether there was an error or not (which means the device driver can use the data if it wants to). */ if (usb_pipein(urb->pipe)) { urb->actual_length = urb_priv->rx_offset; } else { /* Set actual_length for OUT urbs also; the USB mass storage driver seems to want that. We wouldn't know of any partial writes if there was an error. */ if (status == 0) { urb->actual_length = urb->transfer_buffer_length; } else { urb->actual_length = 0; } } /* FIXME: Is there something of the things below we shouldn't do if there was an error? Like, maybe we shouldn't toggle the toggle bits, or maybe we shouldn't insert more traffic. */ save_flags(flags); cli(); *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); nop(); /* We need to fiddle with the toggle bits because the hardware doesn't do it for us. */ if (usb_pipeout(urb->pipe)) { char toggle = IO_EXTRACT(R_USB_EPT_DATA, t_out, *R_USB_EPT_DATA); usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe), toggle); } else { char toggle = IO_EXTRACT(R_USB_EPT_DATA, t_in, *R_USB_EPT_DATA); usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe), toggle); } restore_flags(flags); /* Remember to free the SBs. */ etrax_remove_from_sb_list(urb); kfree(urb_priv); urb->hcpriv = 0; /* If there are any more urb's in the list we'd better start sending */ if (!urb_list_empty(epid)) { struct urb *new_urb; /* Get the first urb. */ new_urb = urb_list_first(epid); assert(new_urb); dbg_bulk("More bulk for epid %d", epid); etrax_usb_add_to_bulk_sb_list(new_urb, epid); } urb->status = status; /* We let any non-zero status from the layer above have precedence. */ if (status == 0) { /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's max length) is to be treated as an error. */ if (urb->transfer_flags & URB_SHORT_NOT_OK) { if (usb_pipein(urb->pipe) && (urb->actual_length != usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)))) { urb->status = -EREMOTEIO; } } } if (urb->complete) { urb->complete(urb, NULL); } if (urb_list_empty(epid)) { /* This means that this EP is now free, deconfigure it. */ etrax_usb_free_epid(epid); /* No more traffic; time to clean up. Must set sub pointer to 0, since we look at the sub pointer when handling the bulk eot interrupt. */ dbg_bulk("No bulk for epid %d", epid); TxBulkEPList[epid].sub = 0; /* Unlink the dummy list. */ dbg_bulk("Kicking dummy list out of party for urb 0x%lx, epid %d", (unsigned long)urb, epid); /* No need to wait for the DMA before changing the next pointer. The modulo NBR_OF_EPIDS isn't actually necessary, since we will never use the last one (INVALID_EPID) for actual traffic. */ TxBulkEPList[epid].next = virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]); } DBFEXIT; } static int etrax_usb_submit_ctrl_urb(struct urb *urb) { int epid; int empty; unsigned long flags; etrax_urb_priv_t *urb_priv; DBFENTER; /* FIXME: Return -ENXIO if there is already a queued urb for this endpoint? */ /* Epid allocation, empty check and list add must be protected. Epid allocation because if we find an existing epid for this endpoint an urb might be completed (emptying the list) before we add the new urb to the list, causing the epid to be de-allocated. We would then start the transfer with an invalid epid -> epid attn. Empty check and add because otherwise we might conclude that the list is not empty, after which it becomes empty before we add the new urb to the list, causing us not to insert the new traffic into the SB list. */ spin_lock_irqsave(&urb_list_lock, flags); epid = etrax_usb_setup_epid(urb); if (epid == -1) { spin_unlock_irqrestore(&urb_list_lock, flags); DBFEXIT; return -ENOMEM; } empty = urb_list_empty(epid); urb_list_add(urb, epid); spin_unlock_irqrestore(&urb_list_lock, flags); dbg_ctrl("Adding ctrl urb 0x%lx to %s list, epid %d", (unsigned long)urb, empty ? "empty" : "", epid); /* Mark the urb as being in progress. */ urb->status = -EINPROGRESS; /* Setup the hcpriv data. */ urb_priv = kmalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG); assert(urb_priv != NULL); /* This sets rx_offset to 0. */ memset(urb_priv, 0, sizeof(etrax_urb_priv_t)); urb_priv->urb_state = NOT_STARTED; urb->hcpriv = urb_priv; if (empty) { etrax_usb_add_to_ctrl_sb_list(urb, epid); } DBFEXIT; return 0; } static void etrax_usb_add_to_ctrl_sb_list(struct urb *urb, int epid) { USB_SB_Desc_t *sb_desc_setup; USB_SB_Desc_t *sb_desc_data; USB_SB_Desc_t *sb_desc_status; etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; unsigned long flags; char maxlen; DBFENTER; maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); sb_desc_setup = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); assert(sb_desc_setup != NULL); sb_desc_status = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); assert(sb_desc_status != NULL); /* Initialize the mandatory setup SB descriptor (used only in control transfers) */ sb_desc_setup->sw_len = 8; sb_desc_setup->command = (IO_FIELD(USB_SB_command, rem, 0) | IO_STATE(USB_SB_command, tt, setup) | IO_STATE(USB_SB_command, full, yes) | IO_STATE(USB_SB_command, eot, yes)); sb_desc_setup->buf = virt_to_phys(urb->setup_packet); if (usb_pipeout(urb->pipe)) { dbg_ctrl("Transfer for epid %d is OUT", epid); /* If this Control OUT transfer has an optional data stage we add an OUT token before the mandatory IN (status) token, hence the reordered SB list */ sb_desc_setup->next = virt_to_phys(sb_desc_status); if (urb->transfer_buffer) { dbg_ctrl("This OUT transfer has an extra data stage"); sb_desc_data = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); assert(sb_desc_data != NULL); sb_desc_setup->next = virt_to_phys(sb_desc_data); sb_desc_data->sw_len = urb->transfer_buffer_length; sb_desc_data->command = (IO_STATE(USB_SB_command, tt, out) | IO_STATE(USB_SB_command, full, yes) | IO_STATE(USB_SB_command, eot, yes)); sb_desc_data->buf = virt_to_phys(urb->transfer_buffer); sb_desc_data->next = virt_to_phys(sb_desc_status); } sb_desc_status->sw_len = 1; sb_desc_status->command = (IO_FIELD(USB_SB_command, rem, 0) | IO_STATE(USB_SB_command, tt, in) | IO_STATE(USB_SB_command, eot, yes) | IO_STATE(USB_SB_command, intr, yes) | IO_STATE(USB_SB_command, eol, yes)); sb_desc_status->buf = 0; sb_desc_status->next = 0; } else if (usb_pipein(urb->pipe)) { dbg_ctrl("Transfer for epid %d is IN", epid); dbg_ctrl("transfer_buffer_length = %d", urb->transfer_buffer_length); dbg_ctrl("rem is calculated to %d", urb->transfer_buffer_length % maxlen); sb_desc_data = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); assert(sb_desc_data != NULL); sb_desc_setup->next = virt_to_phys(sb_desc_data); sb_desc_data->sw_len = urb->transfer_buffer_length ? (urb->transfer_buffer_length - 1) / maxlen + 1 : 0; dbg_ctrl("sw_len got %d", sb_desc_data->sw_len); sb_desc_data->command = (IO_FIELD(USB_SB_command, rem, urb->transfer_buffer_length % maxlen) | IO_STATE(USB_SB_command, tt, in) | IO_STATE(USB_SB_command, eot, yes)); sb_desc_data->buf = 0; sb_desc_data->next = virt_to_phys(sb_desc_status); /* Read comment at zout_buffer declaration for an explanation to this. */ sb_desc_status->sw_len = 1; sb_desc_status->command = (IO_FIELD(USB_SB_command, rem, 0) | IO_STATE(USB_SB_command, tt, zout) | IO_STATE(USB_SB_command, full, yes) | IO_STATE(USB_SB_command, eot, yes) | IO_STATE(USB_SB_command, intr, yes) | IO_STATE(USB_SB_command, eol, yes)); sb_desc_status->buf = virt_to_phys(&zout_buffer[0]); sb_desc_status->next = 0; } urb_priv->first_sb = sb_desc_setup; urb_priv->last_sb = sb_desc_status; urb_priv->epid = epid; urb_priv->urb_state = STARTED; /* Reset toggle bits and reset error count, remember to di and ei */ /* Warning: it is possible that this locking doesn't work with bottom-halves */ save_flags(flags); cli(); *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); nop(); if (*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) { panic("Hold was set in %s", __FUNCTION__); } /* FIXME: Compare with etrax_usb_add_to_bulk_sb_list where the toggle bits are set to a specific value. Why the difference? Read "Transfer and Toggle Bits in Designer's Reference, p. 8 - 11. */ *R_USB_EPT_DATA &= ~(IO_MASK(R_USB_EPT_DATA, error_count_in) | IO_MASK(R_USB_EPT_DATA, error_count_out) | IO_MASK(R_USB_EPT_DATA, t_in) | IO_MASK(R_USB_EPT_DATA, t_out)); /* Since we use the rx interrupt to complete ctrl urbs, we can enable interrupts now (i.e. we don't check the sub pointer on an eot interrupt like we do for bulk traffic). */ restore_flags(flags); /* Assert that the EP descriptor is disabled. */ assert(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable))); /* Set up and enable the EP descriptor. */ TxCtrlEPList[epid].sub = virt_to_phys(sb_desc_setup); TxCtrlEPList[epid].hw_len = 0; TxCtrlEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); /* We start the DMA sub channel without checking if it's running or not, because: 1) If it's already running, issuing the start command is a nop. 2) We avoid a test-and-set race condition. */ *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start); DBFEXIT; } static void etrax_usb_complete_ctrl_urb(struct urb *urb, int status) { etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; int epid = urb_priv->epid; DBFENTER; if (status) warn("Completing ctrl urb with status %d.", status); dbg_ctrl("Completing ctrl epid %d, urb 0x%lx", epid, (unsigned long)urb); /* Remove this urb from the list. */ urb_list_del(urb, epid); /* For an IN pipe, we always set the actual length, regardless of whether there was an error or not (which means the device driver can use the data if it wants to). */ if (usb_pipein(urb->pipe)) { urb->actual_length = urb_priv->rx_offset; } /* FIXME: Is there something of the things below we shouldn't do if there was an error? Like, maybe we shouldn't insert more traffic. */ /* Remember to free the SBs. */ etrax_remove_from_sb_list(urb); kfree(urb_priv); urb->hcpriv = 0; /* If there are any more urbs in the list we'd better start sending. */ if (!urb_list_empty(epid)) { struct urb *new_urb; /* Get the first urb. */ new_urb = urb_list_first(epid); assert(new_urb); dbg_ctrl("More ctrl for epid %d, first urb = 0x%lx", epid, (unsigned long)new_urb); etrax_usb_add_to_ctrl_sb_list(new_urb, epid); } urb->status = status; /* We let any non-zero status from the layer above have precedence. */ if (status == 0) { /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's max length) is to be treated as an error. */ if (urb->transfer_flags & URB_SHORT_NOT_OK) { if (usb_pipein(urb->pipe) && (urb->actual_length != usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)))) { urb->status = -EREMOTEIO; } } } if (urb->complete) { urb->complete(urb, NULL); } if (urb_list_empty(epid)) { /* No more traffic. Time to clean up. */ etrax_usb_free_epid(epid); /* Must set sub pointer to 0. */ dbg_ctrl("No ctrl for epid %d", epid); TxCtrlEPList[epid].sub = 0; } DBFEXIT; } static int etrax_usb_submit_intr_urb(struct urb *urb) { int epid; DBFENTER; if (usb_pipeout(urb->pipe)) { /* Unsupported transfer type. We don't support interrupt out traffic. (If we do, we can't support intervals for neither in or out traffic, but are forced to schedule all interrupt traffic in one frame.) */ return -EINVAL; } epid = etrax_usb_setup_epid(urb); if (epid == -1) { DBFEXIT; return -ENOMEM; } if (!urb_list_empty(epid)) { /* There is already a queued urb for this endpoint. */ etrax_usb_free_epid(epid); return -ENXIO; } urb->status = -EINPROGRESS; dbg_intr("Add intr urb 0x%lx, to list, epid %d", (unsigned long)urb, epid); urb_list_add(urb, epid); etrax_usb_add_to_intr_sb_list(urb, epid); return 0; DBFEXIT; } static void etrax_usb_add_to_intr_sb_list(struct urb *urb, int epid) { volatile USB_EP_Desc_t *tmp_ep; volatile USB_EP_Desc_t *first_ep; char maxlen; int interval; int i; etrax_urb_priv_t *urb_priv; DBFENTER; maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); interval = urb->interval; urb_priv = kmalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG); assert(urb_priv != NULL); memset(urb_priv, 0, sizeof(etrax_urb_priv_t)); urb->hcpriv = urb_priv; first_ep = &TxIntrEPList[0]; /* Round of the interval to 2^n, it is obvious that this code favours smaller numbers, but that is actually a good thing */ /* FIXME: The "rounding error" for larger intervals will be quite large. For in traffic this shouldn't be a problem since it will only mean that we "poll" more often. */ for (i = 0; interval; i++) { interval = interval >> 1; } interval = 1 << (i - 1); dbg_intr("Interval rounded to %d", interval); tmp_ep = first_ep; i = 0; do { if (tmp_ep->command & IO_MASK(USB_EP_command, eof)) { if ((i % interval) == 0) { /* Insert the traffic ep after tmp_ep */ USB_EP_Desc_t *ep_desc; USB_SB_Desc_t *sb_desc; dbg_intr("Inserting EP for epid %d", epid); ep_desc = (USB_EP_Desc_t *) kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); sb_desc = (USB_SB_Desc_t *) kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); assert(ep_desc != NULL); CHECK_ALIGN(ep_desc); assert(sb_desc != NULL); ep_desc->sub = virt_to_phys(sb_desc); ep_desc->hw_len = 0; ep_desc->command = (IO_FIELD(USB_EP_command, epid, epid) | IO_STATE(USB_EP_command, enable, yes)); /* Round upwards the number of packets of size maxlen that this SB descriptor should receive. */ sb_desc->sw_len = urb->transfer_buffer_length ? (urb->transfer_buffer_length - 1) / maxlen + 1 : 0; sb_desc->next = 0; sb_desc->buf = 0; sb_desc->command = (IO_FIELD(USB_SB_command, rem, urb->transfer_buffer_length % maxlen) | IO_STATE(USB_SB_command, tt, in) | IO_STATE(USB_SB_command, eot, yes) | IO_STATE(USB_SB_command, eol, yes)); ep_desc->next = tmp_ep->next; tmp_ep->next = virt_to_phys(ep_desc); } i++; } tmp_ep = (USB_EP_Desc_t *)phys_to_virt(tmp_ep->next); } while (tmp_ep != first_ep); /* Note that first_sb/last_sb doesn't apply to interrupt traffic. */ urb_priv->epid = epid; /* We start the DMA sub channel without checking if it's running or not, because: 1) If it's already running, issuing the start command is a nop. 2) We avoid a test-and-set race condition. */ *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start); DBFEXIT; } static void etrax_usb_complete_intr_urb(struct urb *urb, int status) { etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; int epid = urb_priv->epid; DBFENTER; if (status) warn("Completing intr urb with status %d.", status); dbg_intr("Completing intr epid %d, urb 0x%lx", epid, (unsigned long)urb); urb->status = status; urb->actual_length = urb_priv->rx_offset; dbg_intr("interrupt urb->actual_length = %d", urb->actual_length); /* We let any non-zero status from the layer above have precedence. */ if (status == 0) { /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's max length) is to be treated as an error. */ if (urb->transfer_flags & URB_SHORT_NOT_OK) { if (urb->actual_length != usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) { urb->status = -EREMOTEIO; } } } /* The driver will resubmit the URB so we need to remove it first */ etrax_usb_unlink_urb(urb, 0); if (urb->complete) { urb->complete(urb, NULL); } DBFEXIT; } static int etrax_usb_submit_isoc_urb(struct urb *urb) { int epid; unsigned long flags; DBFENTER; dbg_isoc("Submitting isoc urb = 0x%lx", (unsigned long)urb); /* Epid allocation, empty check and list add must be protected. Read about this in etrax_usb_submit_ctrl_urb. */ spin_lock_irqsave(&urb_list_lock, flags); /* Is there an active epid for this urb ? */ epid = etrax_usb_setup_epid(urb); if (epid == -1) { DBFEXIT; spin_unlock_irqrestore(&urb_list_lock, flags); return -ENOMEM; } /* Ok, now we got valid endpoint, lets insert some traffic */ urb->status = -EINPROGRESS; /* Find the last urb in the URB_List and add this urb after that one. Also add the traffic, that is do an etrax_usb_add_to_isoc_sb_list. This is important to make this in "real time" since isochronous traffic is time sensitive. */ dbg_isoc("Adding isoc urb to (possibly empty) list"); urb_list_add(urb, epid); etrax_usb_add_to_isoc_sb_list(urb, epid); spin_unlock_irqrestore(&urb_list_lock, flags); DBFEXIT; return 0; } static void etrax_usb_check_error_isoc_ep(const int epid) { unsigned long int flags; int error_code; __u32 r_usb_ept_data; /* We can't read R_USB_EPID_ATTN here since it would clear the iso_eof, bulk_eot and epid_attn interrupts. So we just check the status of the epid without testing if for it in R_USB_EPID_ATTN. */ save_flags(flags); cli(); *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); nop(); /* Note that although there are separate R_USB_EPT_DATA and R_USB_EPT_DATA_ISO registers, they are located at the same address and are of the same size. In other words, this read should be ok for isoc also. */ r_usb_ept_data = *R_USB_EPT_DATA; restore_flags(flags); error_code = IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data); if (r_usb_ept_data & IO_MASK(R_USB_EPT_DATA, hold)) { warn("Hold was set for epid %d.", epid); return; } if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA_ISO, error_code, no_error)) { /* This indicates that the SB list of the ept was completed before new data was appended to it. This is not an error, but indicates large system or USB load and could possibly cause trouble for very timing sensitive USB device drivers so we log it. */ info("Isoc. epid %d disabled with no error", epid); return; } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA_ISO, error_code, stall)) { /* Not really a protocol error, just says that the endpoint gave a stall response. Note that error_code cannot be stall for isoc. */ panic("Isoc traffic cannot stall"); } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA_ISO, error_code, bus_error)) { /* Two devices responded to a transaction request. Must be resolved by software. FIXME: Reset ports? */ panic("Bus error for epid %d." " Two devices responded to transaction request", epid); } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, buffer_error)) { /* DMA overrun or underrun. */ warn("Buffer overrun/underrun for epid %d. DMA too busy?", epid); /* It seems that error_code = buffer_error in R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS are the same error. */ } } static void etrax_usb_add_to_isoc_sb_list(struct urb *urb, int epid) { int i = 0; etrax_urb_priv_t *urb_priv; USB_SB_Desc_t *prev_sb_desc, *next_sb_desc, *temp_sb_desc; DBFENTER; prev_sb_desc = next_sb_desc = temp_sb_desc = NULL; urb_priv = kmalloc(sizeof(etrax_urb_priv_t), GFP_ATOMIC); assert(urb_priv != NULL); memset(urb_priv, 0, sizeof(etrax_urb_priv_t)); urb->hcpriv = urb_priv; urb_priv->epid = epid; if (usb_pipeout(urb->pipe)) { if (urb->number_of_packets == 0) panic("etrax_usb_add_to_isoc_sb_list 0 packets\n"); dbg_isoc("Transfer for epid %d is OUT", epid); dbg_isoc("%d packets in URB", urb->number_of_packets); /* Create one SB descriptor for each packet and link them together. */ for (i = 0; i < urb->number_of_packets; i++) { if (!urb->iso_frame_desc[i].length) continue; next_sb_desc = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_ATOMIC); assert(next_sb_desc != NULL); if (urb->iso_frame_desc[i].length > 0) { next_sb_desc->command = (IO_STATE(USB_SB_command, tt, out) | IO_STATE(USB_SB_command, eot, yes)); next_sb_desc->sw_len = urb->iso_frame_desc[i].length; next_sb_desc->buf = virt_to_phys((char*)urb->transfer_buffer + urb->iso_frame_desc[i].offset); /* Check if full length transfer. */ if (urb->iso_frame_desc[i].length == usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) { next_sb_desc->command |= IO_STATE(USB_SB_command, full, yes); } } else { dbg_isoc("zero len packet"); next_sb_desc->command = (IO_FIELD(USB_SB_command, rem, 0) | IO_STATE(USB_SB_command, tt, zout) | IO_STATE(USB_SB_command, eot, yes) | IO_STATE(USB_SB_command, full, yes)); next_sb_desc->sw_len = 1; next_sb_desc->buf = virt_to_phys(&zout_buffer[0]); } /* First SB descriptor that belongs to this urb */ if (i == 0) urb_priv->first_sb = next_sb_desc; else prev_sb_desc->next = virt_to_phys(next_sb_desc); prev_sb_desc = next_sb_desc; } next_sb_desc->command |= (IO_STATE(USB_SB_command, intr, yes) | IO_STATE(USB_SB_command, eol, yes)); next_sb_desc->next = 0; urb_priv->last_sb = next_sb_desc; } else if (usb_pipein(urb->pipe)) { dbg_isoc("Transfer for epid %d is IN", epid); dbg_isoc("transfer_buffer_length = %d", urb->transfer_buffer_length); dbg_isoc("rem is calculated to %d", urb->iso_frame_desc[urb->number_of_packets - 1].length); /* Note that in descriptors for periodic traffic are not consumed. This means that the USB controller never propagates in the SB list. In other words, if there already is an SB descriptor in the list for this EP we don't have to do anything. */ if (TxIsocEPList[epid].sub == 0) { dbg_isoc("Isoc traffic not already running, allocating SB"); next_sb_desc = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_ATOMIC); assert(next_sb_desc != NULL); next_sb_desc->command = (IO_STATE(USB_SB_command, tt, in) | IO_STATE(USB_SB_command, eot, yes) | IO_STATE(USB_SB_command, eol, yes)); next_sb_desc->next = 0; next_sb_desc->sw_len = 1; /* Actual number of packets is not relevant for periodic in traffic as long as it is more than zero. Set to 1 always. */ next_sb_desc->buf = 0; /* The rem field is don't care for isoc traffic, so we don't set it. */ /* Only one SB descriptor that belongs to this urb. */ urb_priv->first_sb = next_sb_desc; urb_priv->last_sb = next_sb_desc; } else { dbg_isoc("Isoc traffic already running, just setting first/last_sb"); /* Each EP for isoc in will have only one SB descriptor, setup when submitting the already active urb. Note that even though we may have several first_sb/last_sb pointing at the same SB descriptor, they are freed only once (when the list has become empty). */ urb_priv->first_sb = phys_to_virt(TxIsocEPList[epid].sub); urb_priv->last_sb = phys_to_virt(TxIsocEPList[epid].sub); return; } } /* Find the spot to insert this urb and add it. */ if (TxIsocEPList[epid].sub == 0) { /* First SB descriptor inserted in this list (in or out). */ dbg_isoc("Inserting SB desc first in list"); TxIsocEPList[epid].hw_len = 0; TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb); } else { /* Isochronous traffic is already running, insert new traffic last (only out). */ dbg_isoc("Inserting SB desc last in list"); temp_sb_desc = phys_to_virt(TxIsocEPList[epid].sub); while ((temp_sb_desc->command & IO_MASK(USB_SB_command, eol)) != IO_STATE(USB_SB_command, eol, yes)) { assert(temp_sb_desc->next); temp_sb_desc = phys_to_virt(temp_sb_desc->next); } dbg_isoc("Appending list on desc 0x%p", temp_sb_desc); /* Next pointer must be set before eol is removed. */ temp_sb_desc->next = virt_to_phys(urb_priv->first_sb); /* Clear the previous end of list flag since there is a new in the added SB descriptor list. */ temp_sb_desc->command &= ~IO_MASK(USB_SB_command, eol); if (!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) { /* 8.8.5 in Designer's Reference says we should check for and correct any errors in the EP here. That should not be necessary if epid_attn is handled correctly, so we assume all is ok. */ dbg_isoc("EP disabled"); etrax_usb_check_error_isoc_ep(epid); /* The SB list was exhausted. */ if (virt_to_phys(urb_priv->last_sb) != TxIsocEPList[epid].sub) { /* The new sublist did not get processed before the EP was disabled. Setup the EP again. */ dbg_isoc("Set EP sub to new list"); TxIsocEPList[epid].hw_len = 0; TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb); } } } if (urb->transfer_flags & URB_ISO_ASAP) { /* The isoc transfer should be started as soon as possible. The start_frame field is a return value if URB_ISO_ASAP was set. Comparing R_USB_FM_NUMBER with a USB Chief trace shows that the first isoc IN token is sent 2 frames later. I'm not sure how this affects usage of the start_frame field by the device driver, or how it affects things when USB_ISO_ASAP is not set, so therefore there's no compensation for the 2 frame "lag" here. */ urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff); TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); urb_priv->urb_state = STARTED; dbg_isoc("URB_ISO_ASAP set, urb->start_frame set to %d", urb->start_frame); } else { /* Not started yet. */ urb_priv->urb_state = NOT_STARTED; dbg_isoc("urb_priv->urb_state set to NOT_STARTED"); } /* We start the DMA sub channel without checking if it's running or not, because: 1) If it's already running, issuing the start command is a nop. 2) We avoid a test-and-set race condition. */ *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start); DBFEXIT; } static void etrax_usb_complete_isoc_urb(struct urb *urb, int status) { etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; int epid = urb_priv->epid; int auto_resubmit = 0; DBFENTER; dbg_isoc("complete urb 0x%p, status %d", urb, status); if (status) warn("Completing isoc urb with status %d.", status); if (usb_pipein(urb->pipe)) { int i; /* Make that all isoc packets have status and length set before completing the urb. */ for (i = urb_priv->isoc_packet_counter; i < urb->number_of_packets; i++) { urb->iso_frame_desc[i].actual_length = 0; urb->iso_frame_desc[i].status = -EPROTO; } urb_list_del(urb, epid); if (!list_empty(&urb_list[epid])) { ((etrax_urb_priv_t *)(urb_list_first(epid)->hcpriv))->urb_state = STARTED; } else { unsigned long int flags; if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) { /* The EP was enabled, disable it and wait. */ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); /* Ah, the luxury of busy-wait. */ while (*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])); } etrax_remove_from_sb_list(urb); TxIsocEPList[epid].sub = 0; TxIsocEPList[epid].hw_len = 0; save_flags(flags); cli(); etrax_usb_free_epid(epid); restore_flags(flags); } urb->hcpriv = 0; kfree(urb_priv); /* Release allocated bandwidth. */ usb_release_bandwidth(urb->dev, urb, 0); } else if (usb_pipeout(urb->pipe)) { int freed_descr; dbg_isoc("Isoc out urb complete 0x%p", urb); /* Update the urb list. */ urb_list_del(urb, epid); freed_descr = etrax_remove_from_sb_list(urb); dbg_isoc("freed %d descriptors of %d packets", freed_descr, urb->number_of_packets); assert(freed_descr == urb->number_of_packets); urb->hcpriv = 0; kfree(urb_priv); /* Release allocated bandwidth. */ usb_release_bandwidth(urb->dev, urb, 0); } urb->status = status; if (urb->complete) { urb->complete(urb, NULL); } if (auto_resubmit) { /* Check that urb was not unlinked by the complete callback. */ if (__urb_list_entry(urb, epid)) { /* Move this one down the list. */ urb_list_move_last(urb, epid); /* Mark the now first urb as started (may already be). */ ((etrax_urb_priv_t *)(urb_list_first(epid)->hcpriv))->urb_state = STARTED; /* Must set this to 0 since this urb is still active after completion. */ urb_priv->isoc_packet_counter = 0; } else { warn("(ISOC) automatic resubmit urb 0x%p removed by complete.", urb); } } DBFEXIT; } static void etrax_usb_complete_urb(struct urb *urb, int status) { switch (usb_pipetype(urb->pipe)) { case PIPE_BULK: etrax_usb_complete_bulk_urb(urb, status); break; case PIPE_CONTROL: etrax_usb_complete_ctrl_urb(urb, status); break; case PIPE_INTERRUPT: etrax_usb_complete_intr_urb(urb, status); break; case PIPE_ISOCHRONOUS: etrax_usb_complete_isoc_urb(urb, status); break; default: err("Unknown pipetype"); } } static irqreturn_t etrax_usb_hc_interrupt_top_half(int irq, void *vhc, struct pt_regs *regs) { usb_interrupt_registers_t *reg; unsigned long flags; __u32 irq_mask; __u8 status; __u32 epid_attn; __u16 port_status_1; __u16 port_status_2; __u32 fm_number; DBFENTER; /* Read critical registers into local variables, do kmalloc afterwards. */ save_flags(flags); cli(); irq_mask = *R_USB_IRQ_MASK_READ; /* Reading R_USB_STATUS clears the ctl_status interrupt. Note that R_USB_STATUS must be read before R_USB_EPID_ATTN since reading the latter clears the ourun and perror fields of R_USB_STATUS. */ status = *R_USB_STATUS; /* Reading R_USB_EPID_ATTN clears the iso_eof, bulk_eot and epid_attn interrupts. */ epid_attn = *R_USB_EPID_ATTN; /* Reading R_USB_RH_PORT_STATUS_1 and R_USB_RH_PORT_STATUS_2 clears the port_status interrupt. */ port_status_1 = *R_USB_RH_PORT_STATUS_1; port_status_2 = *R_USB_RH_PORT_STATUS_2; /* Reading R_USB_FM_NUMBER clears the sof interrupt. */ /* Note: the lower 11 bits contain the actual frame number, sent with each sof. */ fm_number = *R_USB_FM_NUMBER; restore_flags(flags); reg = (usb_interrupt_registers_t *)kmem_cache_alloc(top_half_reg_cache, SLAB_ATOMIC); assert(reg != NULL); reg->hc = (etrax_hc_t *)vhc; /* Now put register values into kmalloc'd area. */ reg->r_usb_irq_mask_read = irq_mask; reg->r_usb_status = status; reg->r_usb_epid_attn = epid_attn; reg->r_usb_rh_port_status_1 = port_status_1; reg->r_usb_rh_port_status_2 = port_status_2; reg->r_usb_fm_number = fm_number; INIT_WORK(®->usb_bh, etrax_usb_hc_interrupt_bottom_half, reg); schedule_work(®->usb_bh); DBFEXIT; return IRQ_HANDLED; } static void etrax_usb_hc_interrupt_bottom_half(void *data) { usb_interrupt_registers_t *reg = (usb_interrupt_registers_t *)data; __u32 irq_mask = reg->r_usb_irq_mask_read; DBFENTER; /* Interrupts are handled in order of priority. */ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, epid_attn)) { etrax_usb_hc_epid_attn_interrupt(reg); } if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, port_status)) { etrax_usb_hc_port_status_interrupt(reg); } if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, ctl_status)) { etrax_usb_hc_ctl_status_interrupt(reg); } if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, iso_eof)) { etrax_usb_hc_isoc_eof_interrupt(); } if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, bulk_eot)) { /* Update/restart the bulk start timer since obviously the channel is running. */ mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL); /* Update/restart the bulk eot timer since we just received an bulk eot interrupt. */ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); etrax_usb_hc_bulk_eot_interrupt(0); } kmem_cache_free(top_half_reg_cache, reg); DBFEXIT; } void etrax_usb_hc_isoc_eof_interrupt(void) { struct urb *urb; etrax_urb_priv_t *urb_priv; int epid; unsigned long flags; DBFENTER; /* Do not check the invalid epid (it has a valid sub pointer). */ for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { /* Do not check the invalid epid (it has a valid sub pointer). */ if ((epid == DUMMY_EPID) || (epid == INVALID_EPID)) continue; /* Disable interrupts to block the isoc out descriptor interrupt handler from being called while the isoc EPID list is being checked. */ save_flags(flags); cli(); if (TxIsocEPList[epid].sub == 0) { /* Nothing here to see. */ restore_flags(flags); continue; } /* Get the first urb (if any). */ urb = urb_list_first(epid); if (urb == 0) { warn("Ignoring NULL urb"); restore_flags(flags); continue; } if (usb_pipein(urb->pipe)) { /* Sanity check. */ assert(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS); urb_priv = (etrax_urb_priv_t *)urb->hcpriv; assert(urb_priv); if (urb_priv->urb_state == NOT_STARTED) { /* If ASAP is not set and urb->start_frame is the current frame, start the transfer. */ if (!(urb->transfer_flags & URB_ISO_ASAP) && (urb->start_frame == (*R_USB_FM_NUMBER & 0x7ff))) { dbg_isoc("Enabling isoc IN EP descr for epid %d", epid); TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); /* This urb is now active. */ urb_priv->urb_state = STARTED; continue; } } } restore_flags(flags); } DBFEXIT; } void etrax_usb_hc_bulk_eot_interrupt(int timer_induced) { int epid; /* The technique is to run one urb at a time, wait for the eot interrupt at which point the EP descriptor has been disabled. */ DBFENTER; dbg_bulk("bulk eot%s", timer_induced ? ", called by timer" : ""); for (epid = 0; epid < NBR_OF_EPIDS; epid++) { if (!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) && (TxBulkEPList[epid].sub != 0)) { struct urb *urb; etrax_urb_priv_t *urb_priv; unsigned long flags; __u32 r_usb_ept_data; /* Found a disabled EP descriptor which has a non-null sub pointer. Verify that this ctrl EP descriptor got disabled no errors. FIXME: Necessary to check error_code? */ dbg_bulk("for epid %d?", epid); /* Get the first urb. */ urb = urb_list_first(epid); /* FIXME: Could this happen for valid reasons? Why did it disappear? Because of wrong unlinking? */ if (!urb) { warn("NULL urb for epid %d", epid); continue; } assert(urb); urb_priv = (etrax_urb_priv_t *)urb->hcpriv; assert(urb_priv); /* Sanity checks. */ assert(usb_pipetype(urb->pipe) == PIPE_BULK); if (phys_to_virt(TxBulkEPList[epid].sub) != urb_priv->last_sb) { err("bulk endpoint got disabled before reaching last sb"); } /* For bulk IN traffic, there seems to be a race condition between between the bulk eot and eop interrupts, or rather an uncertainty regarding the order in which they happen. Normally we expect the eop interrupt from DMA channel 9 to happen before the eot interrupt. Therefore, we complete the bulk IN urb in the rx interrupt handler instead. */ if (usb_pipein(urb->pipe)) { dbg_bulk("in urb, continuing"); continue; } save_flags(flags); cli(); *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); nop(); r_usb_ept_data = *R_USB_EPT_DATA; restore_flags(flags); if (IO_EXTRACT(R_USB_EPT_DATA, error_code, r_usb_ept_data) == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { /* This means that the endpoint has no error, is disabled and had inserted traffic, i.e. transfer successfully completed. */ etrax_usb_complete_bulk_urb(urb, 0); } else { /* Shouldn't happen. We expect errors to be caught by epid attention. */ err("Found disabled bulk EP desc, error_code != no_error"); } } } /* Normally, we should find (at least) one disabled EP descriptor with a valid sub pointer. However, because of the uncertainty in the deliverance of the eop/eot interrupts, we may not. Also, we might find two disabled EPs when handling an eot interrupt, and then find none the next time. */ DBFEXIT; } void etrax_usb_hc_epid_attn_interrupt(usb_interrupt_registers_t *reg) { /* This function handles the epid attention interrupt. There are a variety of reasons for this interrupt to happen (Designer's Reference, p. 8 - 22 for the details): invalid ep_id - Invalid epid in an EP (EP disabled). stall - Not strictly an error condition (EP disabled). 3rd error - Three successive transaction errors (EP disabled). buffer ourun - Buffer overrun or underrun (EP disabled). past eof1 - Intr or isoc transaction proceeds past EOF1. near eof - Intr or isoc transaction would not fit inside the frame. zout transfer - If zout transfer for a bulk endpoint (EP disabled). setup transfer - If setup transfer for a non-ctrl endpoint (EP disabled). */ int epid; DBFENTER; assert(reg != NULL); /* Note that we loop through all epids. We still want to catch errors for the invalid one, even though we might handle them differently. */ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { if (test_bit(epid, (void *)®->r_usb_epid_attn)) { struct urb *urb; __u32 r_usb_ept_data; unsigned long flags; int error_code; save_flags(flags); cli(); *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); nop(); /* Note that although there are separate R_USB_EPT_DATA and R_USB_EPT_DATA_ISO registers, they are located at the same address and are of the same size. In other words, this read should be ok for isoc also. */ r_usb_ept_data = *R_USB_EPT_DATA; restore_flags(flags); /* First some sanity checks. */ if (epid == INVALID_EPID) { /* FIXME: What if it became disabled? Could seriously hurt interrupt traffic. (Use do_intr_recover.) */ warn("Got epid_attn for INVALID_EPID (%d).", epid); err("R_USB_EPT_DATA = 0x%x", r_usb_ept_data); err("R_USB_STATUS = 0x%x", reg->r_usb_status); continue; } else if (epid == DUMMY_EPID) { /* We definitely don't care about these ones. Besides, they are always disabled, so any possible disabling caused by the epid attention interrupt is irrelevant. */ warn("Got epid_attn for DUMMY_EPID (%d).", epid); continue; } /* Get the first urb in the urb list for this epid. We blatantly assume that only the first urb could have caused the epid attention. (For bulk and ctrl, only one urb is active at any one time. For intr and isoc we remove them once they are completed.) */ urb = urb_list_first(epid); if (urb == NULL) { err("Got epid_attn for epid %i with no urb.", epid); err("R_USB_EPT_DATA = 0x%x", r_usb_ept_data); err("R_USB_STATUS = 0x%x", reg->r_usb_status); continue; } switch (usb_pipetype(urb->pipe)) { case PIPE_BULK: warn("Got epid attn for bulk endpoint, epid %d", epid); break; case PIPE_CONTROL: warn("Got epid attn for control endpoint, epid %d", epid); break; case PIPE_INTERRUPT: warn("Got epid attn for interrupt endpoint, epid %d", epid); break; case PIPE_ISOCHRONOUS: warn("Got epid attn for isochronous endpoint, epid %d", epid); break; } if (usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) { if (r_usb_ept_data & IO_MASK(R_USB_EPT_DATA, hold)) { warn("Hold was set for epid %d.", epid); continue; } } /* Even though error_code occupies bits 22 - 23 in both R_USB_EPT_DATA and R_USB_EPT_DATA_ISOC, we separate them here so we don't forget in other places. */ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { error_code = IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data); } else { error_code = IO_EXTRACT(R_USB_EPT_DATA, error_code, r_usb_ept_data); } /* Using IO_STATE_VALUE on R_USB_EPT_DATA should be ok for isoc also. */ if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { /* Isoc traffic doesn't have error_count_in/error_count_out. */ if ((usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) && (IO_EXTRACT(R_USB_EPT_DATA, error_count_in, r_usb_ept_data) == 3 || IO_EXTRACT(R_USB_EPT_DATA, error_count_out, r_usb_ept_data) == 3)) { /* 3rd error. */ warn("3rd error for epid %i", epid); etrax_usb_complete_urb(urb, -EPROTO); } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) { warn("Perror for epid %d", epid); if (!(r_usb_ept_data & IO_MASK(R_USB_EPT_DATA, valid))) { /* invalid ep_id */ panic("Perror because of invalid epid." " Deconfigured too early?"); } else { /* past eof1, near eof, zout transfer, setup transfer */ /* Dump the urb and the relevant EP descriptor list. */ __dump_urb(urb); __dump_ept_data(epid); __dump_ep_list(usb_pipetype(urb->pipe)); panic("Something wrong with DMA descriptor contents." " Too much traffic inserted?"); } } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) { /* buffer ourun */ panic("Buffer overrun/underrun for epid %d. DMA too busy?", epid); } } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, stall)) { /* Not really a protocol error, just says that the endpoint gave a stall response. Note that error_code cannot be stall for isoc. */ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { panic("Isoc traffic cannot stall"); } warn("Stall for epid %d", epid); etrax_usb_complete_urb(urb, -EPIPE); } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, bus_error)) { /* Two devices responded to a transaction request. Must be resolved by software. FIXME: Reset ports? */ panic("Bus error for epid %d." " Two devices responded to transaction request", epid); } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, buffer_error)) { /* DMA overrun or underrun. */ warn("Buffer overrun/underrun for epid %d. DMA too busy?", epid); /* It seems that error_code = buffer_error in R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS are the same error. */ etrax_usb_complete_urb(urb, -EPROTO); } } } DBFEXIT; } void etrax_usb_bulk_start_timer_func(unsigned long dummy) { /* We might enable an EP descriptor behind the current DMA position when it's about to decide that there are no more bulk traffic and it should stop the bulk channel. Therefore we periodically check if the bulk channel is stopped and there is an enabled bulk EP descriptor, in which case we start the bulk channel. */ dbg_bulk("bulk_start_timer timed out."); if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) { int epid; dbg_bulk("Bulk DMA channel not running."); for (epid = 0; epid < NBR_OF_EPIDS; epid++) { if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) { dbg_bulk("Found enabled EP for epid %d, starting bulk channel.\n", epid); *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); /* Restart the bulk eot timer since we just started the bulk channel. */ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); /* No need to search any further. */ break; } } } else { dbg_bulk("Bulk DMA channel running."); } } void etrax_usb_hc_port_status_interrupt(usb_interrupt_registers_t *reg) { etrax_hc_t *hc = reg->hc; __u16 r_usb_rh_port_status_1 = reg->r_usb_rh_port_status_1; __u16 r_usb_rh_port_status_2 = reg->r_usb_rh_port_status_2; DBFENTER; /* The Etrax RH does not include a wPortChange register, so this has to be handled in software (by saving the old port status value for comparison when the port status interrupt happens). See section 11.16.2.6.2 in the USB 1.1 spec for details. */ dbg_rh("hc->rh.prev_wPortStatus_1 = 0x%x", hc->rh.prev_wPortStatus_1); dbg_rh("hc->rh.prev_wPortStatus_2 = 0x%x", hc->rh.prev_wPortStatus_2); dbg_rh("r_usb_rh_port_status_1 = 0x%x", r_usb_rh_port_status_1); dbg_rh("r_usb_rh_port_status_2 = 0x%x", r_usb_rh_port_status_2); /* C_PORT_CONNECTION is set on any transition. */ hc->rh.wPortChange_1 |= ((r_usb_rh_port_status_1 & (1 << RH_PORT_CONNECTION)) != (hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_CONNECTION))) ? (1 << RH_PORT_CONNECTION) : 0; hc->rh.wPortChange_2 |= ((r_usb_rh_port_status_2 & (1 << RH_PORT_CONNECTION)) != (hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_CONNECTION))) ? (1 << RH_PORT_CONNECTION) : 0; /* C_PORT_ENABLE is _only_ set on a one to zero transition, i.e. when the port is disabled, not when it's enabled. */ hc->rh.wPortChange_1 |= ((hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_ENABLE)) && !(r_usb_rh_port_status_1 & (1 << RH_PORT_ENABLE))) ? (1 << RH_PORT_ENABLE) : 0; hc->rh.wPortChange_2 |= ((hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_ENABLE)) && !(r_usb_rh_port_status_2 & (1 << RH_PORT_ENABLE))) ? (1 << RH_PORT_ENABLE) : 0; /* C_PORT_SUSPEND is set to one when the device has transitioned out of the suspended state, i.e. when suspend goes from one to zero. */ hc->rh.wPortChange_1 |= ((hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_SUSPEND)) && !(r_usb_rh_port_status_1 & (1 << RH_PORT_SUSPEND))) ? (1 << RH_PORT_SUSPEND) : 0; hc->rh.wPortChange_2 |= ((hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_SUSPEND)) && !(r_usb_rh_port_status_2 & (1 << RH_PORT_SUSPEND))) ? (1 << RH_PORT_SUSPEND) : 0; /* C_PORT_RESET is set when reset processing on this port is complete. */ hc->rh.wPortChange_1 |= ((hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_RESET)) && !(r_usb_rh_port_status_1 & (1 << RH_PORT_RESET))) ? (1 << RH_PORT_RESET) : 0; hc->rh.wPortChange_2 |= ((hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_RESET)) && !(r_usb_rh_port_status_2 & (1 << RH_PORT_RESET))) ? (1 << RH_PORT_RESET) : 0; /* Save the new values for next port status change. */ hc->rh.prev_wPortStatus_1 = r_usb_rh_port_status_1; hc->rh.prev_wPortStatus_2 = r_usb_rh_port_status_2; dbg_rh("hc->rh.wPortChange_1 set to 0x%x", hc->rh.wPortChange_1); dbg_rh("hc->rh.wPortChange_2 set to 0x%x", hc->rh.wPortChange_2); DBFEXIT; } void etrax_usb_hc_ctl_status_interrupt(usb_interrupt_registers_t *reg) { DBFENTER; /* FIXME: What should we do if we get ourun or perror? Dump the EP and SB list for the corresponding epid? */ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) { panic("USB controller got ourun."); } if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) { /* Before, etrax_usb_do_intr_recover was called on this epid if it was an interrupt pipe. I don't see how re-enabling all EP descriptors will help if there was a programming error. */ panic("USB controller got perror."); } if (reg->r_usb_status & IO_MASK(R_USB_STATUS, device_mode)) { /* We should never operate in device mode. */ panic("USB controller in device mode."); } /* These if-statements could probably be nested. */ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, host_mode)) { info("USB controller in host mode."); } if (reg->r_usb_status & IO_MASK(R_USB_STATUS, started)) { info("USB controller started."); } if (reg->r_usb_status & IO_MASK(R_USB_STATUS, running)) { info("USB controller running."); } DBFEXIT; } static int etrax_rh_submit_urb(struct urb *urb) { struct usb_device *usb_dev = urb->dev; etrax_hc_t *hc = usb_dev->bus->hcpriv; unsigned int pipe = urb->pipe; struct usb_ctrlrequest *cmd = (struct usb_ctrlrequest *) urb->setup_packet; void *data = urb->transfer_buffer; int leni = urb->transfer_buffer_length; int len = 0; int stat = 0; __u16 bmRType_bReq; __u16 wValue; __u16 wIndex; __u16 wLength; DBFENTER; /* FIXME: What is this interrupt urb that is sent to the root hub? */ if (usb_pipetype (pipe) == PIPE_INTERRUPT) { dbg_rh("Root-Hub submit IRQ: every %d ms", urb->interval); hc->rh.urb = urb; hc->rh.send = 1; /* FIXME: We could probably remove this line since it's done in etrax_rh_init_int_timer. (Don't remove it from etrax_rh_init_int_timer though.) */ hc->rh.interval = urb->interval; etrax_rh_init_int_timer(urb); DBFEXIT; return 0; } bmRType_bReq = cmd->bRequestType | (cmd->bRequest << 8); wValue = le16_to_cpu(cmd->wValue); wIndex = le16_to_cpu(cmd->wIndex); wLength = le16_to_cpu(cmd->wLength); dbg_rh("bmRType_bReq : 0x%04x (%d)", bmRType_bReq, bmRType_bReq); dbg_rh("wValue : 0x%04x (%d)", wValue, wValue); dbg_rh("wIndex : 0x%04x (%d)", wIndex, wIndex); dbg_rh("wLength : 0x%04x (%d)", wLength, wLength); switch (bmRType_bReq) { /* Request Destination: without flags: Device, RH_INTERFACE: interface, RH_ENDPOINT: endpoint, RH_CLASS means HUB here, RH_OTHER | RH_CLASS almost ever means HUB_PORT here */ case RH_GET_STATUS: *(__u16 *) data = cpu_to_le16 (1); OK (2); case RH_GET_STATUS | RH_INTERFACE: *(__u16 *) data = cpu_to_le16 (0); OK (2); case RH_GET_STATUS | RH_ENDPOINT: *(__u16 *) data = cpu_to_le16 (0); OK (2); case RH_GET_STATUS | RH_CLASS: *(__u32 *) data = cpu_to_le32 (0); OK (4); /* hub power ** */ case RH_GET_STATUS | RH_OTHER | RH_CLASS: if (wIndex == 1) { *((__u16*)data) = cpu_to_le16(hc->rh.prev_wPortStatus_1); *((__u16*)data + 1) = cpu_to_le16(hc->rh.wPortChange_1); } else if (wIndex == 2) { *((__u16*)data) = cpu_to_le16(hc->rh.prev_wPortStatus_2); *((__u16*)data + 1) = cpu_to_le16(hc->rh.wPortChange_2); } else { dbg_rh("RH_GET_STATUS whith invalid wIndex!"); OK(0); } OK(4); case RH_CLEAR_FEATURE | RH_ENDPOINT: switch (wValue) { case (RH_ENDPOINT_STALL): OK (0); } break; case RH_CLEAR_FEATURE | RH_CLASS: switch (wValue) { case (RH_C_HUB_OVER_CURRENT): OK (0); /* hub power over current ** */ } break; case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS: switch (wValue) { case (RH_PORT_ENABLE): if (wIndex == 1) { dbg_rh("trying to do disable port 1"); *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, yes); while (hc->rh.prev_wPortStatus_1 & IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)); *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no); dbg_rh("Port 1 is disabled"); } else if (wIndex == 2) { dbg_rh("trying to do disable port 2"); *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, yes); while (hc->rh.prev_wPortStatus_2 & IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, yes)); *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no); dbg_rh("Port 2 is disabled"); } else { dbg_rh("RH_CLEAR_FEATURE->RH_PORT_ENABLE " "with invalid wIndex == %d!", wIndex); } OK (0); case (RH_PORT_SUSPEND): /* Opposite to suspend should be resume, so we'll do a resume. */ /* FIXME: USB 1.1, 11.16.2.2 says: "Clearing the PORT_SUSPEND feature causes a host-initiated resume on the specified port. If the port is not in the Suspended state, the hub should treat this request as a functional no-operation." Shouldn't we check if the port is in a suspended state before resuming? */ /* Make sure the controller isn't busy. */ while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); if (wIndex == 1) { *R_USB_COMMAND = IO_STATE(R_USB_COMMAND, port_sel, port1) | IO_STATE(R_USB_COMMAND, port_cmd, resume) | IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); } else if (wIndex == 2) { *R_USB_COMMAND = IO_STATE(R_USB_COMMAND, port_sel, port2) | IO_STATE(R_USB_COMMAND, port_cmd, resume) | IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); } else { dbg_rh("RH_CLEAR_FEATURE->RH_PORT_SUSPEND " "with invalid wIndex == %d!", wIndex); } OK (0); case (RH_PORT_POWER): OK (0); /* port power ** */ case (RH_C_PORT_CONNECTION): if (wIndex == 1) { hc->rh.wPortChange_1 &= ~(1 << RH_PORT_CONNECTION); } else if (wIndex == 2) { hc->rh.wPortChange_2 &= ~(1 << RH_PORT_CONNECTION); } else { dbg_rh("RH_CLEAR_FEATURE->RH_C_PORT_CONNECTION " "with invalid wIndex == %d!", wIndex); } OK (0); case (RH_C_PORT_ENABLE): if (wIndex == 1) { hc->rh.wPortChange_1 &= ~(1 << RH_PORT_ENABLE); } else if (wIndex == 2) { hc->rh.wPortChange_2 &= ~(1 << RH_PORT_ENABLE); } else { dbg_rh("RH_CLEAR_FEATURE->RH_C_PORT_ENABLE " "with invalid wIndex == %d!", wIndex); } OK (0); case (RH_C_PORT_SUSPEND): /*** WR_RH_PORTSTAT(RH_PS_PSSC); */ OK (0); case (RH_C_PORT_OVER_CURRENT): OK (0); /* port power over current ** */ case (RH_C_PORT_RESET): if (wIndex == 1) { hc->rh.wPortChange_1 &= ~(1 << RH_PORT_RESET); } else if (wIndex == 2) { hc->rh.wPortChange_2 &= ~(1 << RH_PORT_RESET); } else { dbg_rh("RH_CLEAR_FEATURE->RH_C_PORT_RESET " "with invalid index == %d!", wIndex); } OK (0); } break; case RH_SET_FEATURE | RH_OTHER | RH_CLASS: switch (wValue) { case (RH_PORT_SUSPEND): /* Make sure the controller isn't busy. */ while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); if (wIndex == 1) { *R_USB_COMMAND = IO_STATE(R_USB_COMMAND, port_sel, port1) | IO_STATE(R_USB_COMMAND, port_cmd, suspend) | IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); } else if (wIndex == 2) { *R_USB_COMMAND = IO_STATE(R_USB_COMMAND, port_sel, port2) | IO_STATE(R_USB_COMMAND, port_cmd, suspend) | IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); } else { dbg_rh("RH_SET_FEATURE->RH_PORT_SUSPEND " "with invalid wIndex == %d!", wIndex); } OK (0); case (RH_PORT_RESET): if (wIndex == 1) { port_1_reset: dbg_rh("Doing reset of port 1"); /* Make sure the controller isn't busy. */ while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); *R_USB_COMMAND = IO_STATE(R_USB_COMMAND, port_sel, port1) | IO_STATE(R_USB_COMMAND, port_cmd, reset) | IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); /* We must wait at least 10 ms for the device to recover. 15 ms should be enough. */ udelay(15000); /* Wait for reset bit to go low (should be done by now). */ while (hc->rh.prev_wPortStatus_1 & IO_STATE(R_USB_RH_PORT_STATUS_1, reset, yes)); /* If the port status is 1) connected and enabled then there is a device and everything is fine 2) neither connected nor enabled then there is no device, also fine 3) connected and not enabled then we try again (Yes, there are other port status combinations besides these.) */ if ((hc->rh.prev_wPortStatus_1 & IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) && (hc->rh.prev_wPortStatus_1 & IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, no))) { dbg_rh("Connected device on port 1, but port not enabled?" " Trying reset again."); goto port_2_reset; } /* Diagnostic printouts. */ if ((hc->rh.prev_wPortStatus_1 & IO_STATE(R_USB_RH_PORT_STATUS_1, connected, no)) && (hc->rh.prev_wPortStatus_1 & IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, no))) { dbg_rh("No connected device on port 1"); } else if ((hc->rh.prev_wPortStatus_1 & IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) && (hc->rh.prev_wPortStatus_1 & IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes))) { dbg_rh("Connected device on port 1, port 1 enabled"); } } else if (wIndex == 2) { port_2_reset: dbg_rh("Doing reset of port 2"); /* Make sure the controller isn't busy. */ while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); /* Issue the reset command. */ *R_USB_COMMAND = IO_STATE(R_USB_COMMAND, port_sel, port2) | IO_STATE(R_USB_COMMAND, port_cmd, reset) | IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); /* We must wait at least 10 ms for the device to recover. 15 ms should be enough. */ udelay(15000); /* Wait for reset bit to go low (should be done by now). */ while (hc->rh.prev_wPortStatus_2 & IO_STATE(R_USB_RH_PORT_STATUS_2, reset, yes)); /* If the port status is 1) connected and enabled then there is a device and everything is fine 2) neither connected nor enabled then there is no device, also fine 3) connected and not enabled then we try again (Yes, there are other port status combinations besides these.) */ if ((hc->rh.prev_wPortStatus_2 & IO_STATE(R_USB_RH_PORT_STATUS_2, connected, yes)) && (hc->rh.prev_wPortStatus_2 & IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, no))) { dbg_rh("Connected device on port 2, but port not enabled?" " Trying reset again."); goto port_2_reset; } /* Diagnostic printouts. */ if ((hc->rh.prev_wPortStatus_2 & IO_STATE(R_USB_RH_PORT_STATUS_2, connected, no)) && (hc->rh.prev_wPortStatus_2 & IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, no))) { dbg_rh("No connected device on port 2"); } else if ((hc->rh.prev_wPortStatus_2 & IO_STATE(R_USB_RH_PORT_STATUS_2, connected, yes)) && (hc->rh.prev_wPortStatus_2 & IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, yes))) { dbg_rh("Connected device on port 2, port 2 enabled"); } } else { dbg_rh("RH_SET_FEATURE->RH_PORT_RESET with invalid wIndex = %d", wIndex); } /* Make sure the controller isn't busy. */ while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); /* If all enabled ports were disabled the host controller goes down into started mode, so we need to bring it back into the running state. (This is safe even if it's already in the running state.) */ *R_USB_COMMAND = IO_STATE(R_USB_COMMAND, port_sel, nop) | IO_STATE(R_USB_COMMAND, port_cmd, reset) | IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); dbg_rh("...Done"); OK(0); case (RH_PORT_POWER): OK (0); /* port power ** */ case (RH_PORT_ENABLE): /* There is no port enable command in the host controller, so if the port is already enabled, we do nothing. If not, we reset the port (with an ugly goto). */ if (wIndex == 1) { if (hc->rh.prev_wPortStatus_1 & IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, no)) { goto port_1_reset; } } else if (wIndex == 2) { if (hc->rh.prev_wPortStatus_2 & IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, no)) { goto port_2_reset; } } else { dbg_rh("RH_SET_FEATURE->RH_GET_STATUS with invalid wIndex = %d", wIndex); } OK (0); } break; case RH_SET_ADDRESS: hc->rh.devnum = wValue; dbg_rh("RH address set to: %d", hc->rh.devnum); OK (0); case RH_GET_DESCRIPTOR: switch ((wValue & 0xff00) >> 8) { case (0x01): /* device descriptor */ len = min_t(unsigned int, leni, min_t(unsigned int, sizeof (root_hub_dev_des), wLength)); memcpy (data, root_hub_dev_des, len); OK (len); case (0x02): /* configuration descriptor */ len = min_t(unsigned int, leni, min_t(unsigned int, sizeof (root_hub_config_des), wLength)); memcpy (data, root_hub_config_des, len); OK (len); case (0x03): /* string descriptors */ len = usb_root_hub_string (wValue & 0xff, 0xff, "ETRAX 100LX", data, wLength); if (len > 0) { OK(min(leni, len)); } else { stat = -EPIPE; } } break; case RH_GET_DESCRIPTOR | RH_CLASS: root_hub_hub_des[2] = hc->rh.numports; len = min_t(unsigned int, leni, min_t(unsigned int, sizeof (root_hub_hub_des), wLength)); memcpy (data, root_hub_hub_des, len); OK (len); case RH_GET_CONFIGURATION: *(__u8 *) data = 0x01; OK (1); case RH_SET_CONFIGURATION: OK (0); default: stat = -EPIPE; } urb->actual_length = len; urb->status = stat; urb->dev = NULL; if (urb->complete) { urb->complete(urb, NULL); } DBFEXIT; return 0; } static void etrax_usb_bulk_eot_timer_func(unsigned long dummy) { /* Because of a race condition in the top half, we might miss a bulk eot. This timer "simulates" a bulk eot if we don't get one for a while, hopefully correcting the situation. */ dbg_bulk("bulk_eot_timer timed out."); etrax_usb_hc_bulk_eot_interrupt(1); } static void* etrax_usb_buffer_alloc(struct usb_bus* bus, size_t size, unsigned mem_flags, dma_addr_t *dma) { return kmalloc(size, mem_flags); } static void etrax_usb_buffer_free(struct usb_bus *bus, size_t size, void *addr, dma_addr_t dma) { kfree(addr); } static struct device fake_device; static int __init etrax_usb_hc_init(void) { static etrax_hc_t *hc; struct usb_bus *bus; struct usb_device *usb_rh; int i; DBFENTER; info("ETRAX 100LX USB-HCD %s (c) 2001-2003 Axis Communications AB\n", usb_hcd_version); hc = kmalloc(sizeof(etrax_hc_t), GFP_KERNEL); assert(hc != NULL); /* We use kmem_cache_* to make sure that all DMA desc. are dword aligned */ /* Note that we specify sizeof(USB_EP_Desc_t) as the size, but also allocate SB descriptors from this cache. This is ok since sizeof(USB_EP_Desc_t) == sizeof(USB_SB_Desc_t). */ usb_desc_cache = kmem_cache_create("usb_desc_cache", sizeof(USB_EP_Desc_t), 0, SLAB_HWCACHE_ALIGN, 0, 0); assert(usb_desc_cache != NULL); top_half_reg_cache = kmem_cache_create("top_half_reg_cache", sizeof(usb_interrupt_registers_t), 0, SLAB_HWCACHE_ALIGN, 0, 0); assert(top_half_reg_cache != NULL); isoc_compl_cache = kmem_cache_create("isoc_compl_cache", sizeof(usb_isoc_complete_data_t), 0, SLAB_HWCACHE_ALIGN, 0, 0); assert(isoc_compl_cache != NULL); etrax_usb_bus = bus = usb_alloc_bus(&etrax_usb_device_operations); hc->bus = bus; bus->bus_name="ETRAX 100LX"; bus->hcpriv = hc; /* Initialize RH to the default address. And make sure that we have no status change indication */ hc->rh.numports = 2; /* The RH has two ports */ hc->rh.devnum = 1; hc->rh.wPortChange_1 = 0; hc->rh.wPortChange_2 = 0; /* Also initate the previous values to zero */ hc->rh.prev_wPortStatus_1 = 0; hc->rh.prev_wPortStatus_2 = 0; /* Initialize the intr-traffic flags */ /* FIXME: This isn't used. (Besides, the error field isn't initialized.) */ hc->intr.sleeping = 0; hc->intr.wq = NULL; epid_usage_bitmask = 0; epid_out_traffic = 0; /* Mark the invalid epid as being used. */ set_bit(INVALID_EPID, (void *)&epid_usage_bitmask); *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, INVALID_EPID); nop(); /* The valid bit should still be set ('invalid' is in our world; not the hardware's). */ *R_USB_EPT_DATA = (IO_STATE(R_USB_EPT_DATA, valid, yes) | IO_FIELD(R_USB_EPT_DATA, max_len, 1)); /* Mark the dummy epid as being used. */ set_bit(DUMMY_EPID, (void *)&epid_usage_bitmask); *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, DUMMY_EPID); nop(); *R_USB_EPT_DATA = (IO_STATE(R_USB_EPT_DATA, valid, no) | IO_FIELD(R_USB_EPT_DATA, max_len, 1)); /* Initialize the urb list by initiating a head for each list. */ for (i = 0; i < NBR_OF_EPIDS; i++) { INIT_LIST_HEAD(&urb_list[i]); } spin_lock_init(&urb_list_lock); INIT_LIST_HEAD(&urb_unlink_list); /* Initiate the bulk start timer. */ init_timer(&bulk_start_timer); bulk_start_timer.expires = jiffies + BULK_START_TIMER_INTERVAL; bulk_start_timer.function = etrax_usb_bulk_start_timer_func; add_timer(&bulk_start_timer); /* Initiate the bulk eot timer. */ init_timer(&bulk_eot_timer); bulk_eot_timer.expires = jiffies + BULK_EOT_TIMER_INTERVAL; bulk_eot_timer.function = etrax_usb_bulk_eot_timer_func; add_timer(&bulk_eot_timer); /* Set up the data structures for USB traffic. Note that this must be done before any interrupt that relies on sane DMA list occurrs. */ init_rx_buffers(); init_tx_bulk_ep(); init_tx_ctrl_ep(); init_tx_intr_ep(); init_tx_isoc_ep(); device_initialize(&fake_device); kobject_set_name(&fake_device.kobj, "etrax_usb"); kobject_add(&fake_device.kobj); kobject_hotplug(&fake_device.kobj, KOBJ_ADD); hc->bus->controller = &fake_device; usb_register_bus(hc->bus); *R_IRQ_MASK2_SET = /* Note that these interrupts are not used. */ IO_STATE(R_IRQ_MASK2_SET, dma8_sub0_descr, set) | /* Sub channel 1 (ctrl) descr. interrupts are used. */ IO_STATE(R_IRQ_MASK2_SET, dma8_sub1_descr, set) | IO_STATE(R_IRQ_MASK2_SET, dma8_sub2_descr, set) | /* Sub channel 3 (isoc) descr. interrupts are used. */ IO_STATE(R_IRQ_MASK2_SET, dma8_sub3_descr, set); /* Note that the dma9_descr interrupt is not used. */ *R_IRQ_MASK2_SET = IO_STATE(R_IRQ_MASK2_SET, dma9_eop, set) | IO_STATE(R_IRQ_MASK2_SET, dma9_descr, set); /* FIXME: Enable iso_eof only when isoc traffic is running. */ *R_USB_IRQ_MASK_SET = IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set) | IO_STATE(R_USB_IRQ_MASK_SET, bulk_eot, set) | IO_STATE(R_USB_IRQ_MASK_SET, epid_attn, set) | IO_STATE(R_USB_IRQ_MASK_SET, port_status, set) | IO_STATE(R_USB_IRQ_MASK_SET, ctl_status, set); if (request_irq(ETRAX_USB_HC_IRQ, etrax_usb_hc_interrupt_top_half, 0, "ETRAX 100LX built-in USB (HC)", hc)) { err("Could not allocate IRQ %d for USB", ETRAX_USB_HC_IRQ); etrax_usb_hc_cleanup(); DBFEXIT; return -1; } if (request_irq(ETRAX_USB_RX_IRQ, etrax_usb_rx_interrupt, 0, "ETRAX 100LX built-in USB (Rx)", hc)) { err("Could not allocate IRQ %d for USB", ETRAX_USB_RX_IRQ); etrax_usb_hc_cleanup(); DBFEXIT; return -1; } if (request_irq(ETRAX_USB_TX_IRQ, etrax_usb_tx_interrupt, 0, "ETRAX 100LX built-in USB (Tx)", hc)) { err("Could not allocate IRQ %d for USB", ETRAX_USB_TX_IRQ); etrax_usb_hc_cleanup(); DBFEXIT; return -1; } /* R_USB_COMMAND: USB commands in host mode. The fields in this register should all be written to in one write. Do not read-modify-write one field at a time. A write to this register will trigger events in the USB controller and an incomplete command may lead to unpredictable results, and in worst case even to a deadlock in the controller. (Note however that the busy field is read-only, so no need to write to it.) */ /* Check the busy bit before writing to R_USB_COMMAND. */ while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); /* Reset the USB interface. */ *R_USB_COMMAND = IO_STATE(R_USB_COMMAND, port_sel, nop) | IO_STATE(R_USB_COMMAND, port_cmd, reset) | IO_STATE(R_USB_COMMAND, ctrl_cmd, reset); /* Designer's Reference, p. 8 - 10 says we should Initate R_USB_FM_PSTART to 0x2A30 (10800), to guarantee that control traffic gets 10% of the bandwidth, and periodic transfer may allocate the rest (90%). This doesn't work though. Read on for a lenghty explanation. While there is a difference between rev. 2 and rev. 3 of the ETRAX 100LX regarding the NAK behaviour, it doesn't solve this problem. What happens is that a control transfer will not be interrupted in its data stage when PSTART happens (the point at which periodic traffic is started). Thus, if PSTART is set to 10800 and its IN or OUT token is NAKed until just before PSTART happens, it will continue the IN/OUT transfer as long as it's ACKed. After it's done, there may be too little time left for an isochronous transfer, causing an epid attention interrupt due to perror. The work-around for this is to let the control transfers run at the end of the frame instead of at the beginning, and will be interrupted just fine if it doesn't fit into the frame. However, since there will *always* be a control transfer at the beginning of the frame, regardless of what we set PSTART to, that transfer might be a 64-byte transfer which consumes up to 15% of the frame, leaving only 85% for periodic traffic. The solution to this would be to 'dummy allocate' 5% of the frame with the usb_claim_bandwidth function to make sure that the periodic transfers that are inserted will always fit in the frame. The idea was suggested that a control transfer could be split up into several 8 byte transfers, so that it would be interrupted by PSTART, but since this can't be done for an IN transfer this hasn't been implemented. The value 11960 is chosen to be just after the SOF token, with a couple of bit times extra for possible bit stuffing. */ *R_USB_FM_PSTART = IO_FIELD(R_USB_FM_PSTART, value, 11960); #ifdef CONFIG_ETRAX_USB_HOST_PORT1 *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no); #endif #ifdef CONFIG_ETRAX_USB_HOST_PORT2 *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no); #endif while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); /* Configure the USB interface as a host controller. */ *R_USB_COMMAND = IO_STATE(R_USB_COMMAND, port_sel, nop) | IO_STATE(R_USB_COMMAND, port_cmd, reset) | IO_STATE(R_USB_COMMAND, ctrl_cmd, host_config); /* Note: Do not reset any ports here. Await the port status interrupts, to have a controlled sequence of resetting the ports. If we reset both ports now, and there are devices on both ports, we will get a bus error because both devices will answer the set address request. */ while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); /* Start processing of USB traffic. */ *R_USB_COMMAND = IO_STATE(R_USB_COMMAND, port_sel, nop) | IO_STATE(R_USB_COMMAND, port_cmd, reset) | IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); usb_rh = usb_alloc_dev(NULL, hc->bus, 0); hc->bus->root_hub = usb_rh; usb_rh->state = USB_STATE_ADDRESS; usb_rh->speed = USB_SPEED_FULL; usb_rh->devnum = 1; hc->bus->devnum_next = 2; usb_rh->ep0.desc.wMaxPacketSize = __const_cpu_to_le16(64); usb_get_device_descriptor(usb_rh, USB_DT_DEVICE_SIZE); usb_new_device(usb_rh); DBFEXIT; return 0; } static void etrax_usb_hc_cleanup(void) { DBFENTER; free_irq(ETRAX_USB_HC_IRQ, NULL); free_irq(ETRAX_USB_RX_IRQ, NULL); free_irq(ETRAX_USB_TX_IRQ, NULL); usb_deregister_bus(etrax_usb_bus); /* FIXME: call kmem_cache_destroy here? */ DBFEXIT; } module_init(etrax_usb_hc_init); module_exit(etrax_usb_hc_cleanup); |