Loading...
# drivers/mtd/maps/Config.in # $Id: Config.in,v 1.16 2001/09/19 18:28:37 dwmw2 Exp $ mainmenu_option next_comment comment 'Mapping drivers for chip access' dep_tristate ' CFI Flash device in physical memory map' CONFIG_MTD_PHYSMAP $CONFIG_MTD_CFI if [ "$CONFIG_MTD_PHYSMAP" = "y" -o "$CONFIG_MTD_PHYSMAP" = "m" ]; then hex ' Physical start address of flash mapping' CONFIG_MTD_PHYSMAP_START 0x8000000 hex ' Physical length of flash mapping' CONFIG_MTD_PHYSMAP_LEN 0x4000000 int ' Bus width in octets' CONFIG_MTD_PHYSMAP_BUSWIDTH 2 fi if [ "$CONFIG_SPARC" = "y" -o "$CONFIG_SPARC64" = "y" ]; then dep_tristate ' Sun Microsystems userflash support' CONFIG_MTD_SUN_UFLASH $CONFIG_MTD_CFI fi if [ "$CONFIG_X86" = "y" ]; then dep_tristate ' CFI Flash device mapped on Photron PNC-2000' CONFIG_MTD_PNC2000 $CONFIG_MTD_CFI $CONFIG_MTD_PARTITIONS dep_tristate ' CFI Flash device mapped on AMD SC520 CDP' CONFIG_MTD_SC520CDP $CONFIG_MTD_CFI dep_tristate ' CFI Flash device mapped on AMD NetSc520' CONFIG_MTD_NETSC520 $CONFIG_MTD_CFI $CONFIG_MTD_PARTITIONS dep_tristate ' CFI Flash device mapped on Arcom SBC-GXx boards' CONFIG_MTD_SBC_GXX $CONFIG_MTD_CFI_INTELEXT $CONFIG_MTD_PARTITIONS dep_tristate ' CFI Flash device mapped on Arcom ELAN-104NC' CONFIG_MTD_ELAN_104NC $CONFIG_MTD_CFI_INTELEXT $CONFIG_MTD_PARTITIONS dep_tristate ' JEDEC Flash device mapped on Mixcom piggyback card' CONFIG_MTD_MIXMEM $CONFIG_MTD_JEDEC dep_tristate ' JEDEC Flash device mapped on Octagon 5066 SBC' CONFIG_MTD_OCTAGON $CONFIG_MTD_JEDEC dep_tristate ' JEDEC Flash device mapped on Tempustech VMAX SBC301' CONFIG_MTD_VMAX $CONFIG_MTD_JEDEC dep_tristate ' BIOS flash chip on Intel L440GX boards' CONFIG_MTD_L440GX $CONFIG_I386 $CONFIG_MTD_JEDEC fi if [ "$CONFIG_PPC" = "y" ]; then dep_tristate ' CFI Flash device mapped on TQM8XXL' CONFIG_MTD_TQM8XXL $CONFIG_MTD_CFI $CONFIG_TQM8xxL $CONFIG_PPC dep_tristate ' CFI Flash device mapped on RPX Lite or CLLF' CONFIG_MTD_RPXLITE $CONFIG_MTD_CFI $CONFIG_PPC dep_tristate ' CFI Flash device mapped on D-Box2' CONFIG_MTD_DBOX2 $CONFIG_MTD_CFI_INTELSTD $CONFIG_MTD_CFI_INTELEXT $CONFIG_MTD_CFI_AMDSTD dep_tristate ' CFI Flash device mapping on FlagaDM' CONFIG_MTD_CFI_FLAGADM $CONFIG_MTD_CFI fi if [ "$CONFIG_MIPS" = "y" ]; then dep_tristate ' Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board' CONFIG_MTD_CSTM_MIPS_IXX $CONFIG_MTD_CFI $CONFIG_MTD_JEDEC $CONFIG_MTD_PARTITIONS if [ "$CONFIG_MTD_CSTM_MIPS_IXX" = "y" -o "$CONFIG_MTD_CSTM_MIPS_IXX" = "m" ]; then hex ' Physical start address of flash mapping' CONFIG_MTD_CSTM_MIPS_IXX_START 0x8000000 hex ' Physical length of flash mapping' CONFIG_MTD_CSTM_MIPS_IXX_LEN 0x4000000 int ' Bus width in octets' CONFIG_MTD_CSTM_MIPS_IXX_BUSWIDTH 2 fi dep_tristate ' Momenco Ocelot boot flash device' CONFIG_MTD_OCELOT $CONFIG_MOMENCO_OCELOT fi if [ "$CONFIG_SH" = "y" ]; then dep_tristate ' CFI Flash device mapped on Hitachi SolutionEngine' CONFIG_MTD_SOLUTIONENGINE $CONFIG_MTD_CFI $CONFIG_SH $CONFIG_MTD_REDBOOT_PARTS fi if [ "$CONFIG_ARM" = "y" ]; then dep_tristate ' CFI Flash device mapped on Nora' CONFIG_MTD_NORA $CONFIG_MTD_CFI dep_tristate ' CFI Flash device mapped on ARM Integrator/P720T' CONFIG_MTD_ARM_INTEGRATOR $CONFIG_MTD_CFI dep_tristate ' Cirrus CDB89712 evaluation board mappings' CONFIG_MTD_CDB89712 $CONFIG_MTD_CFI $CONFIG_ARCH_CDB89712 dep_tristate ' CFI Flash device mapped on StrongARM SA11x0' CONFIG_MTD_SA1100 $CONFIG_MTD_CFI $CONFIG_ARCH_SA1100 $CONFIG_MTD_PARTITIONS dep_tristate ' CFI Flash device mapped on DC21285 Footbridge' CONFIG_MTD_DC21285 $CONFIG_MTD_CFI $CONFIG_ARCH_FOOTBRIDGE $CONFIG_MTD_PARTITIONS dep_tristate ' CFI Flash device mapped on the XScale IQ80310 board' CONFIG_MTD_IQ80310 $CONFIG_MTD_CFI $CONFIG_ARCH_IQ80310 fi endmenu |