Loading...
/* -*- mode: c; c-basic-offset: 8 -*- */ /* NCR Dual 700 MCA SCSI Driver * * Copyright (C) 2001 by James.Bottomley@HansenPartnership.com */ #ifndef _NCR_D700_H #define _NCR_D700_H /* Don't turn on debugging messages */ #undef NCR_D700_DEBUG /* The MCA identifier */ #define NCR_D700_MCA_ID 0x0092 static int D700_detect(Scsi_Host_Template *); static int D700_release(struct Scsi_Host *host); /* Host template. Note the name and proc_name are optional, all the * remaining parameters shown below must be filled in. The 53c700 * routine NCR_700_detect will fill in all of the missing routines */ #define NCR_D700_SCSI { \ .name = "NCR Dual 700 MCA", \ .proc_name = "NCR_D700", \ .detect = D700_detect, \ .release = D700_release, \ .this_id = 7, \ } /* Defines for the Board registers */ #define BOARD_RESET 0x80 /* board level reset */ #define ADD_PARENB 0x04 /* Address Parity Enabled */ #define DAT_PARENB 0x01 /* Data Parity Enabled */ #define SFBK_ENB 0x10 /* SFDBK Interrupt Enabled */ #define LED0GREEN 0x20 /* Led 0 (red 0; green 1) */ #define LED1GREEN 0x40 /* Led 1 (red 0; green 1) */ #define LED0RED 0xDF /* Led 0 (red 0; green 1) */ #define LED1RED 0xBF /* Led 1 (red 0; green 1) */ #define NCR_D700_CLOCK_MHZ 50 #endif |