Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 | /* * sound/pas2_midi.c * * The low level driver for the PAS Midi Interface. */ /* * Copyright (C) by Hannu Savolainen 1993-1997 * * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) * Version 2 (June 1991). See the "COPYING" file distributed with this software * for more info. * * Bartlomiej Zolnierkiewicz : Added __init to pas_init_mixer() */ #include <linux/init.h> #include "sound_config.h" #include "pas2.h" static int midi_busy = 0, input_opened = 0; static int my_dev; int pas2_mididev=-1; static unsigned char tmp_queue[256]; static volatile int qlen; static volatile unsigned char qhead, qtail; static void (*midi_input_intr) (int dev, unsigned char data); static int pas_midi_open(int dev, int mode, void (*input) (int dev, unsigned char data), void (*output) (int dev) ) { int err; unsigned long flags; unsigned char ctrl; if (midi_busy) return -EBUSY; /* * Reset input and output FIFO pointers */ pas_write(0x20 | 0x40, 0x178b); save_flags(flags); cli(); if ((err = pas_set_intr(0x10)) < 0) { restore_flags(flags); return err; } /* * Enable input available and output FIFO empty interrupts */ ctrl = 0; input_opened = 0; midi_input_intr = input; if (mode == OPEN_READ || mode == OPEN_READWRITE) { ctrl |= 0x04; /* Enable input */ input_opened = 1; } if (mode == OPEN_WRITE || mode == OPEN_READWRITE) { ctrl |= 0x08 | 0x10; /* Enable output */ } pas_write(ctrl, 0x178b); /* * Acknowledge any pending interrupts */ pas_write(0xff, 0x1B88); restore_flags(flags); midi_busy = 1; qlen = qhead = qtail = 0; return 0; } static void pas_midi_close(int dev) { /* * Reset FIFO pointers, disable intrs */ pas_write(0x20 | 0x40, 0x178b); pas_remove_intr(0x10); midi_busy = 0; } static int dump_to_midi(unsigned char midi_byte) { int fifo_space, x; fifo_space = ((x = pas_read(0x1B89)) >> 4) & 0x0f; /* * The MIDI FIFO space register and it's documentation is nonunderstandable. * There seem to be no way to differentiate between buffer full and buffer * empty situations. For this reason we don't never write the buffer * completely full. In this way we can assume that 0 (or is it 15) * means that the buffer is empty. */ if (fifo_space < 2 && fifo_space != 0) /* Full (almost) */ return 0; /* Ask upper layers to retry after some time */ pas_write(midi_byte, 0x178A); return 1; } static int pas_midi_out(int dev, unsigned char midi_byte) { unsigned long flags; /* * Drain the local queue first */ save_flags(flags); cli(); while (qlen && dump_to_midi(tmp_queue[qhead])) { qlen--; qhead++; } restore_flags(flags); /* * Output the byte if the local queue is empty. */ if (!qlen) if (dump_to_midi(midi_byte)) return 1; /* * Put to the local queue */ if (qlen >= 256) return 0; /* Local queue full */ save_flags(flags); cli(); tmp_queue[qtail] = midi_byte; qlen++; qtail++; restore_flags(flags); return 1; } static int pas_midi_start_read(int dev) { return 0; } static int pas_midi_end_read(int dev) { return 0; } static void pas_midi_kick(int dev) { } static int pas_buffer_status(int dev) { return qlen; } #define MIDI_SYNTH_NAME "Pro Audio Spectrum Midi" #define MIDI_SYNTH_CAPS SYNTH_CAP_INPUT #include "midi_synth.h" static struct midi_operations pas_midi_operations = { owner: THIS_MODULE, info: {"Pro Audio Spectrum", 0, 0, SNDCARD_PAS}, converter: &std_midi_synth, in_info: {0}, open: pas_midi_open, close: pas_midi_close, outputc: pas_midi_out, start_read: pas_midi_start_read, end_read: pas_midi_end_read, kick: pas_midi_kick, buffer_status: pas_buffer_status, }; void __init pas_midi_init(void) { int dev = sound_alloc_mididev(); if (dev == -1) { printk(KERN_WARNING "pas_midi_init: Too many midi devices detected\n"); return; } std_midi_synth.midi_dev = my_dev = dev; midi_devs[dev] = &pas_midi_operations; pas2_mididev = dev; sequencer_init(); } void pas_midi_interrupt(void) { unsigned char stat; int i, incount; unsigned long flags; stat = pas_read(0x1B88); if (stat & 0x04) /* Input data available */ { incount = pas_read(0x1B89) & 0x0f; /* Input FIFO size */ if (!incount) incount = 16; for (i = 0; i < incount; i++) if (input_opened) { midi_input_intr(my_dev, pas_read(0x178A)); } else pas_read(0x178A); /* Flush */ } if (stat & (0x08 | 0x10)) { save_flags(flags); cli(); while (qlen && dump_to_midi(tmp_queue[qhead])) { qlen--; qhead++; } restore_flags(flags); } if (stat & 0x40) { printk(KERN_WARNING "MIDI output overrun %x,%x\n", pas_read(0x1B89), stat); } pas_write(stat, 0x1B88); /* Acknowledge interrupts */ } |