Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834 1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871 1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892 1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 2032 2033 2034 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046 2047 2048 2049 2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063 2064 2065 2066 2067 2068 2069 2070 2071 2072 2073 2074 2075 2076 2077 2078 2079 2080 2081 2082 2083 2084 2085 2086 2087 2088 2089 2090 2091 2092 2093 2094 2095 2096 2097 2098 2099 2100 2101 2102 2103 2104 2105 2106 2107 2108 2109 2110 2111 2112 2113 2114 2115 2116 2117 2118 2119 2120 2121 2122 2123 2124 2125 2126 2127 2128 2129 2130 2131 2132 2133 2134 2135 2136 2137 2138 2139 2140 2141 2142 2143 2144 2145 2146 2147 2148 2149 2150 2151 2152 2153 2154 2155 2156 2157 2158 2159 2160 2161 2162 2163 2164 2165 2166 2167 2168 2169 2170 2171 2172 2173 2174 2175 2176 2177 2178 2179 2180 2181 2182 2183 2184 2185 2186 2187 2188 2189 2190 2191 2192 2193 2194 2195 2196 2197 2198 2199 2200 2201 2202 2203 2204 2205 2206 2207 2208 2209 2210 2211 2212 2213 2214 2215 2216 2217 2218 2219 2220 2221 2222 2223 2224 2225 2226 2227 2228 2229 2230 2231 2232 2233 2234 2235 2236 2237 2238 2239 2240 2241 2242 2243 2244 2245 2246 2247 2248 2249 2250 2251 2252 2253 2254 2255 2256 2257 2258 2259 2260 2261 2262 2263 2264 2265 2266 2267 2268 2269 2270 2271 2272 2273 2274 2275 2276 2277 2278 2279 2280 2281 2282 2283 2284 2285 2286 2287 2288 2289 2290 2291 2292 2293 2294 2295 2296 2297 2298 2299 2300 2301 2302 2303 2304 2305 2306 2307 2308 2309 2310 2311 2312 2313 2314 2315 2316 2317 2318 2319 2320 2321 2322 2323 2324 2325 2326 2327 2328 2329 2330 2331 2332 2333 2334 2335 2336 2337 2338 2339 2340 2341 2342 2343 2344 2345 2346 2347 2348 2349 2350 2351 2352 2353 2354 2355 2356 2357 2358 2359 2360 2361 2362 2363 2364 2365 2366 2367 2368 2369 2370 2371 2372 2373 2374 2375 2376 2377 2378 2379 2380 2381 2382 2383 2384 2385 2386 2387 2388 2389 2390 2391 2392 2393 2394 2395 2396 2397 2398 2399 2400 2401 2402 2403 2404 2405 2406 2407 2408 2409 2410 2411 2412 2413 2414 2415 2416 2417 2418 2419 2420 2421 2422 2423 2424 2425 2426 2427 2428 2429 2430 2431 2432 2433 2434 2435 2436 2437 2438 2439 2440 2441 2442 2443 2444 2445 2446 2447 2448 2449 2450 2451 2452 2453 2454 2455 2456 2457 2458 2459 2460 2461 2462 2463 2464 2465 2466 2467 2468 2469 2470 2471 2472 2473 2474 2475 2476 2477 2478 2479 2480 2481 2482 2483 2484 2485 2486 2487 2488 2489 2490 2491 2492 2493 2494 2495 2496 2497 2498 2499 2500 2501 2502 2503 2504 2505 2506 2507 2508 2509 2510 2511 2512 2513 2514 2515 2516 2517 2518 2519 2520 2521 2522 2523 2524 2525 2526 2527 2528 2529 2530 2531 2532 2533 2534 2535 2536 2537 2538 2539 2540 2541 2542 2543 2544 2545 2546 2547 2548 2549 2550 2551 2552 2553 2554 2555 2556 2557 2558 2559 2560 2561 2562 2563 2564 2565 2566 2567 2568 2569 2570 2571 2572 2573 2574 2575 2576 2577 2578 2579 2580 2581 2582 2583 2584 2585 2586 2587 2588 2589 2590 2591 2592 2593 2594 2595 2596 2597 2598 2599 2600 2601 2602 2603 2604 2605 2606 2607 2608 2609 2610 2611 2612 2613 2614 2615 2616 2617 2618 2619 2620 2621 2622 2623 2624 2625 2626 2627 2628 2629 2630 2631 2632 2633 2634 2635 2636 2637 2638 2639 2640 2641 2642 2643 2644 2645 2646 2647 2648 2649 2650 2651 2652 2653 2654 2655 2656 2657 2658 2659 2660 2661 2662 2663 2664 2665 2666 2667 2668 2669 2670 2671 2672 2673 2674 2675 2676 2677 2678 2679 2680 2681 2682 2683 2684 2685 2686 2687 2688 2689 2690 2691 2692 2693 2694 2695 2696 2697 2698 2699 2700 2701 2702 2703 2704 2705 2706 2707 2708 2709 2710 2711 2712 2713 2714 2715 2716 2717 2718 2719 2720 2721 2722 2723 2724 2725 2726 2727 2728 2729 2730 2731 2732 2733 2734 2735 2736 2737 2738 2739 2740 2741 2742 2743 2744 2745 2746 2747 2748 2749 2750 2751 2752 2753 2754 2755 2756 2757 2758 2759 2760 2761 2762 2763 2764 2765 2766 2767 2768 2769 2770 2771 2772 | /* * FILE SA-1100.h * * Version 1.2 * Author Copyright (c) Marc A. Viredaz, 1998 * DEC Western Research Laboratory, Palo Alto, CA * Date January 1998 (April 1997) * System StrongARM SA-1100 * Language C or ARM Assembly * Purpose Definition of constants related to the StrongARM * SA-1100 microprocessor (Advanced RISC Machine (ARM) * architecture version 4). This file is based on the * StrongARM SA-1100 data sheet version 2.2. * * Language-specific definitions are selected by the * macro "LANGUAGE", which should be defined as either * "C" (default) or "Assembly". */ /* Be sure that virtual mapping is defined right */ #ifndef __ASM_ARCH_HARDWARE_H #error You must include hardware.h not SA-1100.h #endif #ifndef LANGUAGE # ifdef __ASSEMBLY__ # define LANGUAGE Assembly # else # define LANGUAGE C # endif #endif #ifndef io_p2v #define io_p2v(PhAdd) (PhAdd) #endif #include <asm/arch/bitfield.h> #define C 0 #define Assembly 1 #if LANGUAGE == C typedef unsigned short Word16 ; typedef unsigned int Word32 ; typedef Word32 Word ; typedef Word Quad [4] ; typedef void *Address ; typedef void (*ExcpHndlr) (void) ; #endif /* LANGUAGE == C */ /* * Memory */ #define MemBnkSp 0x08000000 /* Memory Bank Space [byte] */ #define StMemBnkSp MemBnkSp /* Static Memory Bank Space [byte] */ #define StMemBnk0Sp StMemBnkSp /* Static Memory Bank 0 Space */ /* [byte] */ #define StMemBnk1Sp StMemBnkSp /* Static Memory Bank 1 Space */ /* [byte] */ #define StMemBnk2Sp StMemBnkSp /* Static Memory Bank 2 Space */ /* [byte] */ #define StMemBnk3Sp StMemBnkSp /* Static Memory Bank 3 Space */ /* [byte] */ #define DRAMBnkSp MemBnkSp /* DRAM Bank Space [byte] */ #define DRAMBnk0Sp DRAMBnkSp /* DRAM Bank 0 Space [byte] */ #define DRAMBnk1Sp DRAMBnkSp /* DRAM Bank 1 Space [byte] */ #define DRAMBnk2Sp DRAMBnkSp /* DRAM Bank 2 Space [byte] */ #define DRAMBnk3Sp DRAMBnkSp /* DRAM Bank 3 Space [byte] */ #define ZeroMemSp MemBnkSp /* Zero Memory bank Space [byte] */ #define _StMemBnk(Nb) /* Static Memory Bank [0..3] */ \ (0x00000000 + (Nb)*StMemBnkSp) #define _StMemBnk0 _StMemBnk (0) /* Static Memory Bank 0 */ #define _StMemBnk1 _StMemBnk (1) /* Static Memory Bank 1 */ #define _StMemBnk2 _StMemBnk (2) /* Static Memory Bank 2 */ #define _StMemBnk3 _StMemBnk (3) /* Static Memory Bank 3 */ #if LANGUAGE == C typedef Quad StMemBnkType [StMemBnkSp/sizeof (Quad)] ; #define StMemBnk /* Static Memory Bank [0..3] */ \ ((StMemBnkType *) io_p2v (_StMemBnk (0))) #define StMemBnk0 (StMemBnk [0]) /* Static Memory Bank 0 */ #define StMemBnk1 (StMemBnk [1]) /* Static Memory Bank 1 */ #define StMemBnk2 (StMemBnk [2]) /* Static Memory Bank 2 */ #define StMemBnk3 (StMemBnk [3]) /* Static Memory Bank 3 */ #endif /* LANGUAGE == C */ #define _DRAMBnk(Nb) /* DRAM Bank [0..3] */ \ (0xC0000000 + (Nb)*DRAMBnkSp) #define _DRAMBnk0 _DRAMBnk (0) /* DRAM Bank 0 */ #define _DRAMBnk1 _DRAMBnk (1) /* DRAM Bank 1 */ #define _DRAMBnk2 _DRAMBnk (2) /* DRAM Bank 2 */ #define _DRAMBnk3 _DRAMBnk (3) /* DRAM Bank 3 */ #if LANGUAGE == C typedef Quad DRAMBnkType [DRAMBnkSp/sizeof (Quad)] ; #define DRAMBnk /* DRAM Bank [0..3] */ \ ((DRAMBnkType *) io_p2v (_DRAMBnk (0))) #define DRAMBnk0 (DRAMBnk [0]) /* DRAM Bank 0 */ #define DRAMBnk1 (DRAMBnk [1]) /* DRAM Bank 1 */ #define DRAMBnk2 (DRAMBnk [2]) /* DRAM Bank 2 */ #define DRAMBnk3 (DRAMBnk [3]) /* DRAM Bank 3 */ #endif /* LANGUAGE == C */ #define _ZeroMem 0xE0000000 /* Zero Memory bank */ #if LANGUAGE == C typedef Quad ZeroMemType [ZeroMemSp/sizeof (Quad)] ; #define ZeroMem /* Zero Memory bank */ \ (*((ZeroMemType *) io_p2v (_ZeroMem))) #endif /* LANGUAGE == C */ /* * Personal Computer Memory Card International Association (PCMCIA) sockets */ #define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */ #define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ #define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ #define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */ #define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ #define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ #define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ #define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */ #define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ #define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ #define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ #define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */ #define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ #define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ (0x20000000 + (Nb)*PCMCIASp) #define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */ #define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ (_PCMCIA (Nb) + 2*PCMCIAPrtSp) #define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ (_PCMCIA (Nb) + 3*PCMCIAPrtSp) #define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */ #define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */ #define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ #define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ #define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ #define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ #define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ #define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ #if LANGUAGE == C typedef Quad PCMCIAPrtType [PCMCIAPrtSp/sizeof (Quad)] ; typedef PCMCIAPrtType PCMCIAType [PCMCIASp/PCMCIAPrtSp] ; #define PCMCIA0 /* PCMCIA 0 */ \ (*((PCMCIAType *) io_p2v (_PCMCIA0))) #define PCMCIA0IO /* PCMCIA 0 I/O */ \ (*((PCMCIAPrtType *) io_p2v (_PCMCIA0IO))) #define PCMCIA0Attr /* PCMCIA 0 Attribute */ \ (*((PCMCIAPrtType *) io_p2v (_PCMCIA0Attr))) #define PCMCIA0Mem /* PCMCIA 0 Memory */ \ (*((PCMCIAPrtType *) io_p2v (_PCMCIA0Mem))) #define PCMCIA1 /* PCMCIA 1 */ \ (*((PCMCIAType *) io_p2v (_PCMCIA1))) #define PCMCIA1IO /* PCMCIA 1 I/O */ \ (*((PCMCIAPrtType *) io_p2v (_PCMCIA1IO))) #define PCMCIA1Attr /* PCMCIA 1 Attribute */ \ (*((PCMCIAPrtType *) io_p2v (_PCMCIA1Attr))) #define PCMCIA1Mem /* PCMCIA 1 Memory */ \ (*((PCMCIAPrtType *) io_p2v (_PCMCIA1Mem))) #endif /* LANGUAGE == C */ /* * Universal Serial Bus (USB) Device Controller (UDC) control registers * * Registers * Ser0UDCCR Serial port 0 Universal Serial Bus (USB) Device * Controller (UDC) Control Register (read/write). * Ser0UDCAR Serial port 0 Universal Serial Bus (USB) Device * Controller (UDC) Address Register (read/write). * Ser0UDCOMP Serial port 0 Universal Serial Bus (USB) Device * Controller (UDC) Output Maximum Packet size register * (read/write). * Ser0UDCIMP Serial port 0 Universal Serial Bus (USB) Device * Controller (UDC) Input Maximum Packet size register * (read/write). * Ser0UDCCS0 Serial port 0 Universal Serial Bus (USB) Device * Controller (UDC) Control/Status register end-point 0 * (read/write). * Ser0UDCCS1 Serial port 0 Universal Serial Bus (USB) Device * Controller (UDC) Control/Status register end-point 1 * (output, read/write). * Ser0UDCCS2 Serial port 0 Universal Serial Bus (USB) Device * Controller (UDC) Control/Status register end-point 2 * (input, read/write). * Ser0UDCD0 Serial port 0 Universal Serial Bus (USB) Device * Controller (UDC) Data register end-point 0 * (read/write). * Ser0UDCWC Serial port 0 Universal Serial Bus (USB) Device * Controller (UDC) Write Count register end-point 0 * (read). * Ser0UDCDR Serial port 0 Universal Serial Bus (USB) Device * Controller (UDC) Data Register (read/write). * Ser0UDCSR Serial port 0 Universal Serial Bus (USB) Device * Controller (UDC) Status Register (read/write). */ #define _Ser0UDCCR 0x80000000 /* Ser. port 0 UDC Control Reg. */ #define _Ser0UDCAR 0x80000004 /* Ser. port 0 UDC Address Reg. */ #define _Ser0UDCOMP 0x80000008 /* Ser. port 0 UDC Output Maximum */ /* Packet size reg. */ #define _Ser0UDCIMP 0x8000000C /* Ser. port 0 UDC Input Maximum */ /* Packet size reg. */ #define _Ser0UDCCS0 0x80000010 /* Ser. port 0 UDC Control/Status */ /* reg. end-point 0 */ #define _Ser0UDCCS1 0x80000014 /* Ser. port 0 UDC Control/Status */ /* reg. end-point 1 (output) */ #define _Ser0UDCCS2 0x80000018 /* Ser. port 0 UDC Control/Status */ /* reg. end-point 2 (input) */ #define _Ser0UDCD0 0x8000001C /* Ser. port 0 UDC Data reg. */ /* end-point 0 */ #define _Ser0UDCWC 0x80000020 /* Ser. port 0 UDC Write Count */ /* reg. end-point 0 */ #define _Ser0UDCDR 0x80000028 /* Ser. port 0 UDC Data Reg. */ #define _Ser0UDCSR 0x80000030 /* Ser. port 0 UDC Status Reg. */ #if LANGUAGE == C #define Ser0UDCCR /* Ser. port 0 UDC Control Reg. */ \ (*((volatile Word *) io_p2v (_Ser0UDCCR))) #define Ser0UDCAR /* Ser. port 0 UDC Address Reg. */ \ (*((volatile Word *) io_p2v (_Ser0UDCAR))) #define Ser0UDCOMP /* Ser. port 0 UDC Output Maximum */ \ /* Packet size reg. */ \ (*((volatile Word *) io_p2v (_Ser0UDCOMP))) #define Ser0UDCIMP /* Ser. port 0 UDC Input Maximum */ \ /* Packet size reg. */ \ (*((volatile Word *) io_p2v (_Ser0UDCIMP))) #define Ser0UDCCS0 /* Ser. port 0 UDC Control/Status */ \ /* reg. end-point 0 */ \ (*((volatile Word *) io_p2v (_Ser0UDCCS0))) #define Ser0UDCCS1 /* Ser. port 0 UDC Control/Status */ \ /* reg. end-point 1 (output) */ \ (*((volatile Word *) io_p2v (_Ser0UDCCS1))) #define Ser0UDCCS2 /* Ser. port 0 UDC Control/Status */ \ /* reg. end-point 2 (input) */ \ (*((volatile Word *) io_p2v (_Ser0UDCCS2))) #define Ser0UDCD0 /* Ser. port 0 UDC Data reg. */ \ /* end-point 0 */ \ (*((volatile Word *) io_p2v (_Ser0UDCD0))) #define Ser0UDCWC /* Ser. port 0 UDC Write Count */ \ /* reg. end-point 0 */ \ (*((volatile Word *) io_p2v (_Ser0UDCWC))) #define Ser0UDCDR /* Ser. port 0 UDC Data Reg. */ \ (*((volatile Word *) io_p2v (_Ser0UDCDR))) #define Ser0UDCSR /* Ser. port 0 UDC Status Reg. */ \ (*((volatile Word *) io_p2v (_Ser0UDCSR))) #endif /* LANGUAGE == C */ #define UDCCR_UDD 0x00000001 /* UDC Disable */ #define UDCCR_UDA 0x00000002 /* UDC Active (read) */ #define UDCCR_EIM 0x00000008 /* End-point 0 Interrupt Mask */ /* (disable) */ #define UDCCR_RIM 0x00000010 /* Receive Interrupt Mask */ /* (disable) */ #define UDCCR_TIM 0x00000020 /* Transmit Interrupt Mask */ /* (disable) */ #define UDCCR_SRM 0x00000040 /* Suspend/Resume interrupt Mask */ /* (disable) */ #define UDCCR_REM 0x00000080 /* REset interrupt Mask (disable) */ #define UDCAR_ADD Fld (7, 0) /* function ADDress */ #define UDCOMP_OUTMAXP Fld (8, 0) /* OUTput MAXimum Packet size - 1 */ /* [byte] */ #define UDCOMP_OutMaxPkt(Size) /* Output Maximum Packet size */ \ /* [1..256 byte] */ \ (((Size) - 1) << FShft (UDCOMP_OUTMAXP)) #define UDCIMP_INMAXP Fld (8, 0) /* INput MAXimum Packet size - 1 */ /* [byte] */ #define UDCIMP_InMaxPkt(Size) /* Input Maximum Packet size */ \ /* [1..256 byte] */ \ (((Size) - 1) << FShft (UDCIMP_INMAXP)) #define UDCCS0_OPR 0x00000001 /* Output Packet Ready (read) */ #define UDCCS0_IPR 0x00000002 /* Input Packet Ready */ #define UDCCS0_SST 0x00000004 /* Sent STall */ #define UDCCS0_FST 0x00000008 /* Force STall */ #define UDCCS0_DE 0x00000010 /* Data End */ #define UDCCS0_SE 0x00000020 /* Setup End (read) */ #define UDCCS0_SO 0x00000040 /* Serviced Output packet ready */ /* (write) */ #define UDCCS0_SSE 0x00000080 /* Serviced Setup End (write) */ #define UDCCS1_RFS 0x00000001 /* Receive FIFO 12-bytes or more */ /* Service request (read) */ #define UDCCS1_RPC 0x00000002 /* Receive Packet Complete */ #define UDCCS1_RPE 0x00000004 /* Receive Packet Error (read) */ #define UDCCS1_SST 0x00000008 /* Sent STall */ #define UDCCS1_FST 0x00000010 /* Force STall */ #define UDCCS1_RNE 0x00000020 /* Receive FIFO Not Empty (read) */ #define UDCCS2_TFS 0x00000001 /* Transmit FIFO 8-bytes or less */ /* Service request (read) */ #define UDCCS2_TPC 0x00000002 /* Transmit Packet Complete */ #define UDCCS2_TPE 0x00000004 /* Transmit Packet Error (read) */ #define UDCCS2_TUR 0x00000008 /* Transmit FIFO Under-Run */ #define UDCCS2_SST 0x00000010 /* Sent STall */ #define UDCCS2_FST 0x00000020 /* Force STall */ #define UDCD0_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ #define UDCWC_WC Fld (4, 0) /* Write Count */ #define UDCDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ #define UDCSR_EIR 0x00000001 /* End-point 0 Interrupt Request */ #define UDCSR_RIR 0x00000002 /* Receive Interrupt Request */ #define UDCSR_TIR 0x00000004 /* Transmit Interrupt Request */ #define UDCSR_SUSIR 0x00000008 /* SUSpend Interrupt Request */ #define UDCSR_RESIR 0x00000010 /* RESume Interrupt Request */ #define UDCSR_RSTIR 0x00000020 /* ReSeT Interrupt Request */ /* * Universal Asynchronous Receiver/Transmitter (UART) control registers * * Registers * Ser1UTCR0 Serial port 1 Universal Asynchronous * Receiver/Transmitter (UART) Control Register 0 * (read/write). * Ser1UTCR1 Serial port 1 Universal Asynchronous * Receiver/Transmitter (UART) Control Register 1 * (read/write). * Ser1UTCR2 Serial port 1 Universal Asynchronous * Receiver/Transmitter (UART) Control Register 2 * (read/write). * Ser1UTCR3 Serial port 1 Universal Asynchronous * Receiver/Transmitter (UART) Control Register 3 * (read/write). * Ser1UTDR Serial port 1 Universal Asynchronous * Receiver/Transmitter (UART) Data Register * (read/write). * Ser1UTSR0 Serial port 1 Universal Asynchronous * Receiver/Transmitter (UART) Status Register 0 * (read/write). * Ser1UTSR1 Serial port 1 Universal Asynchronous * Receiver/Transmitter (UART) Status Register 1 (read). * * Ser2UTCR0 Serial port 2 Universal Asynchronous * Receiver/Transmitter (UART) Control Register 0 * (read/write). * Ser2UTCR1 Serial port 2 Universal Asynchronous * Receiver/Transmitter (UART) Control Register 1 * (read/write). * Ser2UTCR2 Serial port 2 Universal Asynchronous * Receiver/Transmitter (UART) Control Register 2 * (read/write). * Ser2UTCR3 Serial port 2 Universal Asynchronous * Receiver/Transmitter (UART) Control Register 3 * (read/write). * Ser2UTCR4 Serial port 2 Universal Asynchronous * Receiver/Transmitter (UART) Control Register 4 * (read/write). * Ser2UTDR Serial port 2 Universal Asynchronous * Receiver/Transmitter (UART) Data Register * (read/write). * Ser2UTSR0 Serial port 2 Universal Asynchronous * Receiver/Transmitter (UART) Status Register 0 * (read/write). * Ser2UTSR1 Serial port 2 Universal Asynchronous * Receiver/Transmitter (UART) Status Register 1 (read). * * Ser3UTCR0 Serial port 3 Universal Asynchronous * Receiver/Transmitter (UART) Control Register 0 * (read/write). * Ser3UTCR1 Serial port 3 Universal Asynchronous * Receiver/Transmitter (UART) Control Register 1 * (read/write). * Ser3UTCR2 Serial port 3 Universal Asynchronous * Receiver/Transmitter (UART) Control Register 2 * (read/write). * Ser3UTCR3 Serial port 3 Universal Asynchronous * Receiver/Transmitter (UART) Control Register 3 * (read/write). * Ser3UTDR Serial port 3 Universal Asynchronous * Receiver/Transmitter (UART) Data Register * (read/write). * Ser3UTSR0 Serial port 3 Universal Asynchronous * Receiver/Transmitter (UART) Status Register 0 * (read/write). * Ser3UTSR1 Serial port 3 Universal Asynchronous * Receiver/Transmitter (UART) Status Register 1 (read). * * Clocks * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz * or 3.5795 MHz). * fua, Tua Frequency, period of the UART communication. */ #define _UTCR0(Nb) /* UART Control Reg. 0 [1..3] */ \ (0x80010000 + ((Nb) - 1)*0x00020000) #define _UTCR1(Nb) /* UART Control Reg. 1 [1..3] */ \ (0x80010004 + ((Nb) - 1)*0x00020000) #define _UTCR2(Nb) /* UART Control Reg. 2 [1..3] */ \ (0x80010008 + ((Nb) - 1)*0x00020000) #define _UTCR3(Nb) /* UART Control Reg. 3 [1..3] */ \ (0x8001000C + ((Nb) - 1)*0x00020000) #define _UTCR4(Nb) /* UART Control Reg. 4 [2] */ \ (0x80010010 + ((Nb) - 1)*0x00020000) #define _UTDR(Nb) /* UART Data Reg. [1..3] */ \ (0x80010014 + ((Nb) - 1)*0x00020000) #define _UTSR0(Nb) /* UART Status Reg. 0 [1..3] */ \ (0x8001001C + ((Nb) - 1)*0x00020000) #define _UTSR1(Nb) /* UART Status Reg. 1 [1..3] */ \ (0x80010020 + ((Nb) - 1)*0x00020000) #define _Ser1UTCR0 _UTCR0 (1) /* Ser. port 1 UART Control Reg. 0 */ #define _Ser1UTCR1 _UTCR1 (1) /* Ser. port 1 UART Control Reg. 1 */ #define _Ser1UTCR2 _UTCR2 (1) /* Ser. port 1 UART Control Reg. 2 */ #define _Ser1UTCR3 _UTCR3 (1) /* Ser. port 1 UART Control Reg. 3 */ #define _Ser1UTDR _UTDR (1) /* Ser. port 1 UART Data Reg. */ #define _Ser1UTSR0 _UTSR0 (1) /* Ser. port 1 UART Status Reg. 0 */ #define _Ser1UTSR1 _UTSR1 (1) /* Ser. port 1 UART Status Reg. 1 */ #define _Ser2UTCR0 _UTCR0 (2) /* Ser. port 2 UART Control Reg. 0 */ #define _Ser2UTCR1 _UTCR1 (2) /* Ser. port 2 UART Control Reg. 1 */ #define _Ser2UTCR2 _UTCR2 (2) /* Ser. port 2 UART Control Reg. 2 */ #define _Ser2UTCR3 _UTCR3 (2) /* Ser. port 2 UART Control Reg. 3 */ #define _Ser2UTCR4 _UTCR4 (2) /* Ser. port 2 UART Control Reg. 4 */ #define _Ser2UTDR _UTDR (2) /* Ser. port 2 UART Data Reg. */ #define _Ser2UTSR0 _UTSR0 (2) /* Ser. port 2 UART Status Reg. 0 */ #define _Ser2UTSR1 _UTSR1 (2) /* Ser. port 2 UART Status Reg. 1 */ #define _Ser3UTCR0 _UTCR0 (3) /* Ser. port 3 UART Control Reg. 0 */ #define _Ser3UTCR1 _UTCR1 (3) /* Ser. port 3 UART Control Reg. 1 */ #define _Ser3UTCR2 _UTCR2 (3) /* Ser. port 3 UART Control Reg. 2 */ #define _Ser3UTCR3 _UTCR3 (3) /* Ser. port 3 UART Control Reg. 3 */ #define _Ser3UTDR _UTDR (3) /* Ser. port 3 UART Data Reg. */ #define _Ser3UTSR0 _UTSR0 (3) /* Ser. port 3 UART Status Reg. 0 */ #define _Ser3UTSR1 _UTSR1 (3) /* Ser. port 3 UART Status Reg. 1 */ #if LANGUAGE == C #define Ser1UTCR0 /* Ser. port 1 UART Control Reg. 0 */ \ (*((volatile Word *) io_p2v (_Ser1UTCR0))) #define Ser1UTCR1 /* Ser. port 1 UART Control Reg. 1 */ \ (*((volatile Word *) io_p2v (_Ser1UTCR1))) #define Ser1UTCR2 /* Ser. port 1 UART Control Reg. 2 */ \ (*((volatile Word *) io_p2v (_Ser1UTCR2))) #define Ser1UTCR3 /* Ser. port 1 UART Control Reg. 3 */ \ (*((volatile Word *) io_p2v (_Ser1UTCR3))) #define Ser1UTDR /* Ser. port 1 UART Data Reg. */ \ (*((volatile Word *) io_p2v (_Ser1UTDR))) #define Ser1UTSR0 /* Ser. port 1 UART Status Reg. 0 */ \ (*((volatile Word *) io_p2v (_Ser1UTSR0))) #define Ser1UTSR1 /* Ser. port 1 UART Status Reg. 1 */ \ (*((volatile Word *) io_p2v (_Ser1UTSR1))) #define Ser2UTCR0 /* Ser. port 2 UART Control Reg. 0 */ \ (*((volatile Word *) io_p2v (_Ser2UTCR0))) #define Ser2UTCR1 /* Ser. port 2 UART Control Reg. 1 */ \ (*((volatile Word *) io_p2v (_Ser2UTCR1))) #define Ser2UTCR2 /* Ser. port 2 UART Control Reg. 2 */ \ (*((volatile Word *) io_p2v (_Ser2UTCR2))) #define Ser2UTCR3 /* Ser. port 2 UART Control Reg. 3 */ \ (*((volatile Word *) io_p2v (_Ser2UTCR3))) #define Ser2UTCR4 /* Ser. port 2 UART Control Reg. 4 */ \ (*((volatile Word *) io_p2v (_Ser2UTCR4))) #define Ser2UTDR /* Ser. port 2 UART Data Reg. */ \ (*((volatile Word *) io_p2v (_Ser2UTDR))) #define Ser2UTSR0 /* Ser. port 2 UART Status Reg. 0 */ \ (*((volatile Word *) io_p2v (_Ser2UTSR0))) #define Ser2UTSR1 /* Ser. port 2 UART Status Reg. 1 */ \ (*((volatile Word *) io_p2v (_Ser2UTSR1))) #define Ser3UTCR0 /* Ser. port 3 UART Control Reg. 0 */ \ (*((volatile Word *) io_p2v (_Ser3UTCR0))) #define Ser3UTCR1 /* Ser. port 3 UART Control Reg. 1 */ \ (*((volatile Word *) io_p2v (_Ser3UTCR1))) #define Ser3UTCR2 /* Ser. port 3 UART Control Reg. 2 */ \ (*((volatile Word *) io_p2v (_Ser3UTCR2))) #define Ser3UTCR3 /* Ser. port 3 UART Control Reg. 3 */ \ (*((volatile Word *) io_p2v (_Ser3UTCR3))) #define Ser3UTDR /* Ser. port 3 UART Data Reg. */ \ (*((volatile Word *) io_p2v (_Ser3UTDR))) #define Ser3UTSR0 /* Ser. port 3 UART Status Reg. 0 */ \ (*((volatile Word *) io_p2v (_Ser3UTSR0))) #define Ser3UTSR1 /* Ser. port 3 UART Status Reg. 1 */ \ (*((volatile Word *) io_p2v (_Ser3UTSR1))) #endif /* LANGUAGE == C */ #define UTCR0_PE 0x00000001 /* Parity Enable */ #define UTCR0_OES 0x00000002 /* Odd/Even parity Select */ #define UTCR0_OddPar (UTCR0_OES*0) /* Odd Parity */ #define UTCR0_EvenPar (UTCR0_OES*1) /* Even Parity */ #define UTCR0_SBS 0x00000004 /* Stop Bit Select */ #define UTCR0_1StpBit (UTCR0_SBS*0) /* 1 Stop Bit per frame */ #define UTCR0_2StpBit (UTCR0_SBS*1) /* 2 Stop Bits per frame */ #define UTCR0_DSS 0x00000008 /* Data Size Select */ #define UTCR0_7BitData (UTCR0_DSS*0) /* 7-Bit Data */ #define UTCR0_8BitData (UTCR0_DSS*1) /* 8-Bit Data */ #define UTCR0_SCE 0x00000010 /* Sample Clock Enable */ /* (ser. port 1: GPIO [18], */ /* ser. port 3: GPIO [20]) */ #define UTCR0_RCE 0x00000020 /* Receive Clock Edge select */ #define UTCR0_RcRsEdg (UTCR0_RCE*0) /* Receive clock Rising-Edge */ #define UTCR0_RcFlEdg (UTCR0_RCE*1) /* Receive clock Falling-Edge */ #define UTCR0_TCE 0x00000040 /* Transmit Clock Edge select */ #define UTCR0_TrRsEdg (UTCR0_TCE*0) /* Transmit clock Rising-Edge */ #define UTCR0_TrFlEdg (UTCR0_TCE*1) /* Transmit clock Falling-Edge */ #define UTCR0_Ser2IrDA /* Ser. port 2 IrDA settings */ \ (UTCR0_1StpBit + UTCR0_8BitData) #define UTCR1_BRD Fld (4, 0) /* Baud Rate Divisor/16 - 1 [11:8] */ #define UTCR2_BRD Fld (8, 0) /* Baud Rate Divisor/16 - 1 [7:0] */ /* fua = fxtl/(16*(BRD[11:0] + 1)) */ /* Tua = 16*(BRD [11:0] + 1)*Txtl */ #define UTCR1_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \ (((Div) - 16)/16 >> FSize (UTCR2_BRD) << \ FShft (UTCR1_BRD)) #define UTCR2_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \ (((Div) - 16)/16 & FAlnMsk (UTCR2_BRD) << \ FShft (UTCR2_BRD)) /* fua = fxtl/(16*Floor (Div/16)) */ /* Tua = 16*Floor (Div/16)*Txtl */ #define UTCR1_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \ (((Div) - 1)/16 >> FSize (UTCR2_BRD) << \ FShft (UTCR1_BRD)) #define UTCR2_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \ (((Div) - 1)/16 & FAlnMsk (UTCR2_BRD) << \ FShft (UTCR2_BRD)) /* fua = fxtl/(16*Ceil (Div/16)) */ /* Tua = 16*Ceil (Div/16)*Txtl */ #define UTCR3_RXE 0x00000001 /* Receive Enable */ #define UTCR3_TXE 0x00000002 /* Transmit Enable */ #define UTCR3_BRK 0x00000004 /* BReaK mode */ #define UTCR3_RIE 0x00000008 /* Receive FIFO 1/3-to-2/3-full or */ /* more Interrupt Enable */ #define UTCR3_TIE 0x00000010 /* Transmit FIFO 1/2-full or less */ /* Interrupt Enable */ #define UTCR3_LBM 0x00000020 /* Look-Back Mode */ #define UTCR3_Ser2IrDA /* Ser. port 2 IrDA settings (RIE, */ \ /* TIE, LBM can be set or cleared) */ \ (UTCR3_RXE + UTCR3_TXE) #define UTCR4_HSE 0x00000001 /* Hewlett-Packard Serial InfraRed */ /* (HP-SIR) modulation Enable */ #define UTCR4_NRZ (UTCR4_HSE*0) /* Non-Return to Zero modulation */ #define UTCR4_HPSIR (UTCR4_HSE*1) /* HP-SIR modulation */ #define UTCR4_LPM 0x00000002 /* Low-Power Mode */ #define UTCR4_Z3_16Bit (UTCR4_LPM*0) /* Zero pulse = 3/16 Bit time */ #define UTCR4_Z1_6us (UTCR4_LPM*1) /* Zero pulse = 1.6 us */ #define UTDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ #if 0 /* Hidden receive FIFO bits */ #define UTDR_PRE 0x00000100 /* receive PaRity Error (read) */ #define UTDR_FRE 0x00000200 /* receive FRaming Error (read) */ #define UTDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */ #endif /* 0 */ #define UTSR0_TFS 0x00000001 /* Transmit FIFO 1/2-full or less */ /* Service request (read) */ #define UTSR0_RFS 0x00000002 /* Receive FIFO 1/3-to-2/3-full or */ /* more Service request (read) */ #define UTSR0_RID 0x00000004 /* Receiver IDle */ #define UTSR0_RBB 0x00000008 /* Receive Beginning of Break */ #define UTSR0_REB 0x00000010 /* Receive End of Break */ #define UTSR0_EIF 0x00000020 /* Error In FIFO (read) */ #define UTSR1_TBY 0x00000001 /* Transmitter BusY (read) */ #define UTSR1_RNE 0x00000002 /* Receive FIFO Not Empty (read) */ #define UTSR1_TNF 0x00000004 /* Transmit FIFO Not Full (read) */ #define UTSR1_PRE 0x00000008 /* receive PaRity Error (read) */ #define UTSR1_FRE 0x00000010 /* receive FRaming Error (read) */ #define UTSR1_ROR 0x00000020 /* Receive FIFO Over-Run (read) */ /* * Synchronous Data Link Controller (SDLC) control registers * * Registers * Ser1SDCR0 Serial port 1 Synchronous Data Link Controller (SDLC) * Control Register 0 (read/write). * Ser1SDCR1 Serial port 1 Synchronous Data Link Controller (SDLC) * Control Register 1 (read/write). * Ser1SDCR2 Serial port 1 Synchronous Data Link Controller (SDLC) * Control Register 2 (read/write). * Ser1SDCR3 Serial port 1 Synchronous Data Link Controller (SDLC) * Control Register 3 (read/write). * Ser1SDCR4 Serial port 1 Synchronous Data Link Controller (SDLC) * Control Register 4 (read/write). * Ser1SDDR Serial port 1 Synchronous Data Link Controller (SDLC) * Data Register (read/write). * Ser1SDSR0 Serial port 1 Synchronous Data Link Controller (SDLC) * Status Register 0 (read/write). * Ser1SDSR1 Serial port 1 Synchronous Data Link Controller (SDLC) * Status Register 1 (read/write). * * Clocks * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz * or 3.5795 MHz). * fsd, Tsd Frequency, period of the SDLC communication. */ #define _Ser1SDCR0 0x80020060 /* Ser. port 1 SDLC Control Reg. 0 */ #define _Ser1SDCR1 0x80020064 /* Ser. port 1 SDLC Control Reg. 1 */ #define _Ser1SDCR2 0x80020068 /* Ser. port 1 SDLC Control Reg. 2 */ #define _Ser1SDCR3 0x8002006C /* Ser. port 1 SDLC Control Reg. 3 */ #define _Ser1SDCR4 0x80020070 /* Ser. port 1 SDLC Control Reg. 4 */ #define _Ser1SDDR 0x80020078 /* Ser. port 1 SDLC Data Reg. */ #define _Ser1SDSR0 0x80020080 /* Ser. port 1 SDLC Status Reg. 0 */ #define _Ser1SDSR1 0x80020084 /* Ser. port 1 SDLC Status Reg. 1 */ #if LANGUAGE == C #define Ser1SDCR0 /* Ser. port 1 SDLC Control Reg. 0 */ \ (*((volatile Word *) io_p2v (_Ser1SDCR0))) #define Ser1SDCR1 /* Ser. port 1 SDLC Control Reg. 1 */ \ (*((volatile Word *) io_p2v (_Ser1SDCR1))) #define Ser1SDCR2 /* Ser. port 1 SDLC Control Reg. 2 */ \ (*((volatile Word *) io_p2v (_Ser1SDCR2))) #define Ser1SDCR3 /* Ser. port 1 SDLC Control Reg. 3 */ \ (*((volatile Word *) io_p2v (_Ser1SDCR3))) #define Ser1SDCR4 /* Ser. port 1 SDLC Control Reg. 4 */ \ (*((volatile Word *) io_p2v (_Ser1SDCR4))) #define Ser1SDDR /* Ser. port 1 SDLC Data Reg. */ \ (*((volatile Word *) io_p2v (_Ser1SDDR))) #define Ser1SDSR0 /* Ser. port 1 SDLC Status Reg. 0 */ \ (*((volatile Word *) io_p2v (_Ser1SDSR0))) #define Ser1SDSR1 /* Ser. port 1 SDLC Status Reg. 1 */ \ (*((volatile Word *) io_p2v (_Ser1SDSR1))) #endif /* LANGUAGE == C */ #define SDCR0_SUS 0x00000001 /* SDLC/UART Select */ #define SDCR0_SDLC (SDCR0_SUS*0) /* SDLC mode (TXD1 & RXD1) */ #define SDCR0_UART (SDCR0_SUS*1) /* UART mode (TXD1 & RXD1) */ #define SDCR0_SDF 0x00000002 /* Single/Double start Flag select */ #define SDCR0_SglFlg (SDCR0_SDF*0) /* Single start Flag */ #define SDCR0_DblFlg (SDCR0_SDF*1) /* Double start Flag */ #define SDCR0_LBM 0x00000004 /* Look-Back Mode */ #define SDCR0_BMS 0x00000008 /* Bit Modulation Select */ #define SDCR0_FM0 (SDCR0_BMS*0) /* Freq. Modulation zero (0) */ #define SDCR0_NRZ (SDCR0_BMS*1) /* Non-Return to Zero modulation */ #define SDCR0_SCE 0x00000010 /* Sample Clock Enable (GPIO [16]) */ #define SDCR0_SCD 0x00000020 /* Sample Clock Direction select */ /* (GPIO [16]) */ #define SDCR0_SClkIn (SDCR0_SCD*0) /* Sample Clock Input */ #define SDCR0_SClkOut (SDCR0_SCD*1) /* Sample Clock Output */ #define SDCR0_RCE 0x00000040 /* Receive Clock Edge select */ #define SDCR0_RcRsEdg (SDCR0_RCE*0) /* Receive clock Rising-Edge */ #define SDCR0_RcFlEdg (SDCR0_RCE*1) /* Receive clock Falling-Edge */ #define SDCR0_TCE 0x00000080 /* Transmit Clock Edge select */ #define SDCR0_TrRsEdg (SDCR0_TCE*0) /* Transmit clock Rising-Edge */ #define SDCR0_TrFlEdg (SDCR0_TCE*1) /* Transmit clock Falling-Edge */ #define SDCR1_AAF 0x00000001 /* Abort After Frame enable */ /* (GPIO [17]) */ #define SDCR1_TXE 0x00000002 /* Transmit Enable */ #define SDCR1_RXE 0x00000004 /* Receive Enable */ #define SDCR1_RIE 0x00000008 /* Receive FIFO 1/3-to-2/3-full or */ /* more Interrupt Enable */ #define SDCR1_TIE 0x00000010 /* Transmit FIFO 1/2-full or less */ /* Interrupt Enable */ #define SDCR1_AME 0x00000020 /* Address Match Enable */ #define SDCR1_TUS 0x00000040 /* Transmit FIFO Under-run Select */ #define SDCR1_EFrmURn (SDCR1_TUS*0) /* End Frame on Under-Run */ #define SDCR1_AbortURn (SDCR1_TUS*1) /* Abort on Under-Run */ #define SDCR1_RAE 0x00000080 /* Receive Abort interrupt Enable */ #define SDCR2_AMV Fld (8, 0) /* Address Match Value */ #define SDCR3_BRD Fld (4, 0) /* Baud Rate Divisor/16 - 1 [11:8] */ #define SDCR4_BRD Fld (8, 0) /* Baud Rate Divisor/16 - 1 [7:0] */ /* fsd = fxtl/(16*(BRD[11:0] + 1)) */ /* Tsd = 16*(BRD[11:0] + 1)*Txtl */ #define SDCR3_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \ (((Div) - 16)/16 >> FSize (SDCR4_BRD) << \ FShft (SDCR3_BRD)) #define SDCR4_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \ (((Div) - 16)/16 & FAlnMsk (SDCR4_BRD) << \ FShft (SDCR4_BRD)) /* fsd = fxtl/(16*Floor (Div/16)) */ /* Tsd = 16*Floor (Div/16)*Txtl */ #define SDCR3_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \ (((Div) - 1)/16 >> FSize (SDCR4_BRD) << \ FShft (SDCR3_BRD)) #define SDCR4_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \ (((Div) - 1)/16 & FAlnMsk (SDCR4_BRD) << \ FShft (SDCR4_BRD)) /* fsd = fxtl/(16*Ceil (Div/16)) */ /* Tsd = 16*Ceil (Div/16)*Txtl */ #define SDDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ #if 0 /* Hidden receive FIFO bits */ #define SDDR_EOF 0x00000100 /* receive End-Of-Frame (read) */ #define SDDR_CRE 0x00000200 /* receive CRC Error (read) */ #define SDDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */ #endif /* 0 */ #define SDSR0_EIF 0x00000001 /* Error In FIFO (read) */ #define SDSR0_TUR 0x00000002 /* Transmit FIFO Under-Run */ #define SDSR0_RAB 0x00000004 /* Receive ABort */ #define SDSR0_TFS 0x00000008 /* Transmit FIFO 1/2-full or less */ /* Service request (read) */ #define SDSR0_RFS 0x00000010 /* Receive FIFO 1/3-to-2/3-full or */ /* more Service request (read) */ #define SDSR1_RSY 0x00000001 /* Receiver SYnchronized (read) */ #define SDSR1_TBY 0x00000002 /* Transmitter BusY (read) */ #define SDSR1_RNE 0x00000004 /* Receive FIFO Not Empty (read) */ #define SDSR1_TNF 0x00000008 /* Transmit FIFO Not Full (read) */ #define SDSR1_RTD 0x00000010 /* Receive Transition Detected */ #define SDSR1_EOF 0x00000020 /* receive End-Of-Frame (read) */ #define SDSR1_CRE 0x00000040 /* receive CRC Error (read) */ #define SDSR1_ROR 0x00000080 /* Receive FIFO Over-Run (read) */ /* * High-Speed Serial to Parallel controller (HSSP) control registers * * Registers * Ser2HSCR0 Serial port 2 High-Speed Serial to Parallel * controller (HSSP) Control Register 0 (read/write). * Ser2HSCR1 Serial port 2 High-Speed Serial to Parallel * controller (HSSP) Control Register 1 (read/write). * Ser2HSDR Serial port 2 High-Speed Serial to Parallel * controller (HSSP) Data Register (read/write). * Ser2HSSR0 Serial port 2 High-Speed Serial to Parallel * controller (HSSP) Status Register 0 (read/write). * Ser2HSSR1 Serial port 2 High-Speed Serial to Parallel * controller (HSSP) Status Register 1 (read). * Ser2HSCR2 Serial port 2 High-Speed Serial to Parallel * controller (HSSP) Control Register 2 (read/write). * [The HSCR2 register is only implemented in * versions 2.0 (rev. = 8) and higher of the StrongARM * SA-1100.] */ #define _Ser2HSCR0 0x80040060 /* Ser. port 2 HSSP Control Reg. 0 */ #define _Ser2HSCR1 0x80040064 /* Ser. port 2 HSSP Control Reg. 1 */ #define _Ser2HSDR 0x8004006C /* Ser. port 2 HSSP Data Reg. */ #define _Ser2HSSR0 0x80040074 /* Ser. port 2 HSSP Status Reg. 0 */ #define _Ser2HSSR1 0x80040078 /* Ser. port 2 HSSP Status Reg. 1 */ #define _Ser2HSCR2 0x90060028 /* Ser. port 2 HSSP Control Reg. 2 */ #if LANGUAGE == C #define Ser2HSCR0 /* Ser. port 2 HSSP Control Reg. 0 */ \ (*((volatile Word *) io_p2v (_Ser2HSCR0))) #define Ser2HSCR1 /* Ser. port 2 HSSP Control Reg. 1 */ \ (*((volatile Word *) io_p2v (_Ser2HSCR1))) #define Ser2HSDR /* Ser. port 2 HSSP Data Reg. */ \ (*((volatile Word *) io_p2v (_Ser2HSDR))) #define Ser2HSSR0 /* Ser. port 2 HSSP Status Reg. 0 */ \ (*((volatile Word *) io_p2v (_Ser2HSSR0))) #define Ser2HSSR1 /* Ser. port 2 HSSP Status Reg. 1 */ \ (*((volatile Word *) io_p2v (_Ser2HSSR1))) #define Ser2HSCR2 /* Ser. port 2 HSSP Control Reg. 2 */ \ (*((volatile Word *) io_p2v (_Ser2HSCR2))) #endif /* LANGUAGE == C */ #define HSCR0_ITR 0x00000001 /* IrDA Transmission Rate */ #define HSCR0_UART (HSCR0_ITR*0) /* UART mode (115.2 kb/s if IrDA) */ #define HSCR0_HSSP (HSCR0_ITR*1) /* HSSP mode (4 Mb/s) */ #define HSCR0_LBM 0x00000002 /* Look-Back Mode */ #define HSCR0_TUS 0x00000004 /* Transmit FIFO Under-run Select */ #define HSCR0_EFrmURn (HSCR0_TUS*0) /* End Frame on Under-Run */ #define HSCR0_AbortURn (HSCR0_TUS*1) /* Abort on Under-Run */ #define HSCR0_TXE 0x00000008 /* Transmit Enable */ #define HSCR0_RXE 0x00000010 /* Receive Enable */ #define HSCR0_RIE 0x00000020 /* Receive FIFO 2/5-to-3/5-full or */ /* more Interrupt Enable */ #define HSCR0_TIE 0x00000040 /* Transmit FIFO 1/2-full or less */ /* Interrupt Enable */ #define HSCR0_AME 0x00000080 /* Address Match Enable */ #define HSCR1_AMV Fld (8, 0) /* Address Match Value */ #define HSDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ #if 0 /* Hidden receive FIFO bits */ #define HSDR_EOF 0x00000100 /* receive End-Of-Frame (read) */ #define HSDR_CRE 0x00000200 /* receive CRC Error (read) */ #define HSDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */ #endif /* 0 */ #define HSSR0_EIF 0x00000001 /* Error In FIFO (read) */ #define HSSR0_TUR 0x00000002 /* Transmit FIFO Under-Run */ #define HSSR0_RAB 0x00000004 /* Receive ABort */ #define HSSR0_TFS 0x00000008 /* Transmit FIFO 1/2-full or less */ /* Service request (read) */ #define HSSR0_RFS 0x00000010 /* Receive FIFO 2/5-to-3/5-full or */ /* more Service request (read) */ #define HSSR0_FRE 0x00000020 /* receive FRaming Error */ #define HSSR1_RSY 0x00000001 /* Receiver SYnchronized (read) */ #define HSSR1_TBY 0x00000002 /* Transmitter BusY (read) */ #define HSSR1_RNE 0x00000004 /* Receive FIFO Not Empty (read) */ #define HSSR1_TNF 0x00000008 /* Transmit FIFO Not Full (read) */ #define HSSR1_EOF 0x00000010 /* receive End-Of-Frame (read) */ #define HSSR1_CRE 0x00000020 /* receive CRC Error (read) */ #define HSSR1_ROR 0x00000040 /* Receive FIFO Over-Run (read) */ #define HSCR2_TXP 0x00040000 /* Transmit data Polarity (TXD_2) */ #define HSCR2_TrDataL (HSCR2_TXP*0) /* Transmit Data active Low */ /* (inverted) */ #define HSCR2_TrDataH (HSCR2_TXP*1) /* Transmit Data active High */ /* (non-inverted) */ #define HSCR2_RXP 0x00080000 /* Receive data Polarity (RXD_2) */ #define HSCR2_RcDataL (HSCR2_RXP*0) /* Receive Data active Low */ /* (inverted) */ #define HSCR2_RcDataH (HSCR2_RXP*1) /* Receive Data active High */ /* (non-inverted) */ /* * Multi-media Communications Port (MCP) control registers * * Registers * Ser4MCCR0 Serial port 4 Multi-media Communications Port (MCP) * Control Register 0 (read/write). * Ser4MCDR0 Serial port 4 Multi-media Communications Port (MCP) * Data Register 0 (audio, read/write). * Ser4MCDR1 Serial port 4 Multi-media Communications Port (MCP) * Data Register 1 (telecom, read/write). * Ser4MCDR2 Serial port 4 Multi-media Communications Port (MCP) * Data Register 2 (CODEC registers, read/write). * Ser4MCSR Serial port 4 Multi-media Communications Port (MCP) * Status Register (read/write). * Ser4MCCR1 Serial port 4 Multi-media Communications Port (MCP) * Control Register 1 (read/write). * [The MCCR1 register is only implemented in * versions 2.0 (rev. = 8) and higher of the StrongARM * SA-1100.] * * Clocks * fmc, Tmc Frequency, period of the MCP communication (10 MHz, * 12 MHz, or GPIO [21]). * faud, Taud Frequency, period of the audio sampling. * ftcm, Ttcm Frequency, period of the telecom sampling. */ #define _Ser4MCCR0 0x80060000 /* Ser. port 4 MCP Control Reg. 0 */ #define _Ser4MCDR0 0x80060008 /* Ser. port 4 MCP Data Reg. 0 */ /* (audio) */ #define _Ser4MCDR1 0x8006000C /* Ser. port 4 MCP Data Reg. 1 */ /* (telecom) */ #define _Ser4MCDR2 0x80060010 /* Ser. port 4 MCP Data Reg. 2 */ /* (CODEC reg.) */ #define _Ser4MCSR 0x80060018 /* Ser. port 4 MCP Status Reg. */ #define _Ser4MCCR1 0x90060030 /* Ser. port 4 MCP Control Reg. 1 */ #if LANGUAGE == C #define Ser4MCCR0 /* Ser. port 4 MCP Control Reg. 0 */ \ (*((volatile Word *) io_p2v (_Ser4MCCR0))) #define Ser4MCDR0 /* Ser. port 4 MCP Data Reg. 0 */ \ /* (audio) */ \ (*((volatile Word *) io_p2v (_Ser4MCDR0))) #define Ser4MCDR1 /* Ser. port 4 MCP Data Reg. 1 */ \ /* (telecom) */ \ (*((volatile Word *) io_p2v (_Ser4MCDR1))) #define Ser4MCDR2 /* Ser. port 4 MCP Data Reg. 2 */ \ /* (CODEC reg.) */ \ (*((volatile Word *) io_p2v (_Ser4MCDR2))) #define Ser4MCSR /* Ser. port 4 MCP Status Reg. */ \ (*((volatile Word *) io_p2v (_Ser4MCSR))) #define Ser4MCCR1 /* Ser. port 4 MCP Control Reg. 1 */ \ (*((volatile Word *) io_p2v (_Ser4MCCR1))) #endif /* LANGUAGE == C */ #define MCCR0_ASD Fld (7, 0) /* Audio Sampling rate Divisor/32 */ /* [6..127] */ /* faud = fmc/(32*ASD) */ /* Taud = 32*ASD*Tmc */ #define MCCR0_AudSmpDiv(Div) /* Audio Sampling rate Divisor */ \ /* [192..4064] */ \ ((Div)/32 << FShft (MCCR0_ASD)) /* faud = fmc/(32*Floor (Div/32)) */ /* Taud = 32*Floor (Div/32)*Tmc */ #define MCCR0_CeilAudSmpDiv(Div) /* Ceil. of AudSmpDiv [192..4064] */ \ (((Div) + 31)/32 << FShft (MCCR0_ASD)) /* faud = fmc/(32*Ceil (Div/32)) */ /* Taud = 32*Ceil (Div/32)*Tmc */ #define MCCR0_TSD Fld (7, 8) /* Telecom Sampling rate */ /* Divisor/32 [16..127] */ /* ftcm = fmc/(32*TSD) */ /* Ttcm = 32*TSD*Tmc */ #define MCCR0_TcmSmpDiv(Div) /* Telecom Sampling rate Divisor */ \ /* [512..4064] */ \ ((Div)/32 << FShft (MCCR0_TSD)) /* ftcm = fmc/(32*Floor (Div/32)) */ /* Ttcm = 32*Floor (Div/32)*Tmc */ #define MCCR0_CeilTcmSmpDiv(Div) /* Ceil. of TcmSmpDiv [512..4064] */ \ (((Div) + 31)/32 << FShft (MCCR0_TSD)) /* ftcm = fmc/(32*Ceil (Div/32)) */ /* Ttcm = 32*Ceil (Div/32)*Tmc */ #define MCCR0_MCE 0x00010000 /* MCP Enable */ #define MCCR0_ECS 0x00020000 /* External Clock Select */ #define MCCR0_IntClk (MCCR0_ECS*0) /* Internal Clock (10 or 12 MHz) */ #define MCCR0_ExtClk (MCCR0_ECS*1) /* External Clock (GPIO [21]) */ #define MCCR0_ADM 0x00040000 /* A/D (audio/telecom) data */ /* sampling/storing Mode */ #define MCCR0_VldBit (MCCR0_ADM*0) /* Valid Bit storing mode */ #define MCCR0_SmpCnt (MCCR0_ADM*1) /* Sampling Counter storing mode */ #define MCCR0_TTE 0x00080000 /* Telecom Transmit FIFO 1/2-full */ /* or less interrupt Enable */ #define MCCR0_TRE 0x00100000 /* Telecom Receive FIFO 1/2-full */ /* or more interrupt Enable */ #define MCCR0_ATE 0x00200000 /* Audio Transmit FIFO 1/2-full */ /* or less interrupt Enable */ #define MCCR0_ARE 0x00400000 /* Audio Receive FIFO 1/2-full or */ /* more interrupt Enable */ #define MCCR0_LBM 0x00800000 /* Look-Back Mode */ #define MCCR0_ECP Fld (2, 24) /* External Clock Prescaler - 1 */ #define MCCR0_ExtClkDiv(Div) /* External Clock Divisor [1..4] */ \ (((Div) - 1) << FShft (MCCR0_ECP)) #define MCDR0_DATA Fld (12, 4) /* receive/transmit audio DATA */ /* FIFOs */ #define MCDR1_DATA Fld (14, 2) /* receive/transmit telecom DATA */ /* FIFOs */ /* receive/transmit CODEC reg. */ /* FIFOs: */ #define MCDR2_DATA Fld (16, 0) /* reg. DATA */ #define MCDR2_RW 0x00010000 /* reg. Read/Write (transmit) */ #define MCDR2_Rd (MCDR2_RW*0) /* reg. Read */ #define MCDR2_Wr (MCDR2_RW*1) /* reg. Write */ #define MCDR2_ADD Fld (4, 17) /* reg. ADDress */ #define MCSR_ATS 0x00000001 /* Audio Transmit FIFO 1/2-full */ /* or less Service request (read) */ #define MCSR_ARS 0x00000002 /* Audio Receive FIFO 1/2-full or */ /* more Service request (read) */ #define MCSR_TTS 0x00000004 /* Telecom Transmit FIFO 1/2-full */ /* or less Service request (read) */ #define MCSR_TRS 0x00000008 /* Telecom Receive FIFO 1/2-full */ /* or more Service request (read) */ #define MCSR_ATU 0x00000010 /* Audio Transmit FIFO Under-run */ #define MCSR_ARO 0x00000020 /* Audio Receive FIFO Over-run */ #define MCSR_TTU 0x00000040 /* Telecom Transmit FIFO Under-run */ #define MCSR_TRO 0x00000080 /* Telecom Receive FIFO Over-run */ #define MCSR_ANF 0x00000100 /* Audio transmit FIFO Not Full */ /* (read) */ #define MCSR_ANE 0x00000200 /* Audio receive FIFO Not Empty */ /* (read) */ #define MCSR_TNF 0x00000400 /* Telecom transmit FIFO Not Full */ /* (read) */ #define MCSR_TNE 0x00000800 /* Telecom receive FIFO Not Empty */ /* (read) */ #define MCSR_CWC 0x00001000 /* CODEC register Write Completed */ /* (read) */ #define MCSR_CRC 0x00002000 /* CODEC register Read Completed */ /* (read) */ #define MCSR_ACE 0x00004000 /* Audio CODEC Enabled (read) */ #define MCSR_TCE 0x00008000 /* Telecom CODEC Enabled (read) */ #define MCCR1_CFS 0x00100000 /* Clock Freq. Select */ #define MCCR1_F12MHz (MCCR1_CFS*0) /* Freq. (fmc) = ~ 12 MHz */ /* (11.981 MHz) */ #define MCCR1_F10MHz (MCCR1_CFS*1) /* Freq. (fmc) = ~ 10 MHz */ /* (9.585 MHz) */ /* * Synchronous Serial Port (SSP) control registers * * Registers * Ser4SSCR0 Serial port 4 Synchronous Serial Port (SSP) Control * Register 0 (read/write). * Ser4SSCR1 Serial port 4 Synchronous Serial Port (SSP) Control * Register 1 (read/write). * [Bits SPO and SP are only implemented in versions 2.0 * (rev. = 8) and higher of the StrongARM SA-1100.] * Ser4SSDR Serial port 4 Synchronous Serial Port (SSP) Data * Register (read/write). * Ser4SSSR Serial port 4 Synchronous Serial Port (SSP) Status * Register (read/write). * * Clocks * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz * or 3.5795 MHz). * fss, Tss Frequency, period of the SSP communication. */ #define _Ser4SSCR0 0x80070060 /* Ser. port 4 SSP Control Reg. 0 */ #define _Ser4SSCR1 0x80070064 /* Ser. port 4 SSP Control Reg. 1 */ #define _Ser4SSDR 0x8007006C /* Ser. port 4 SSP Data Reg. */ #define _Ser4SSSR 0x80070074 /* Ser. port 4 SSP Status Reg. */ #if LANGUAGE == C #define Ser4SSCR0 /* Ser. port 4 SSP Control Reg. 0 */ \ (*((volatile Word *) io_p2v (_Ser4SSCR0))) #define Ser4SSCR1 /* Ser. port 4 SSP Control Reg. 1 */ \ (*((volatile Word *) io_p2v (_Ser4SSCR1))) #define Ser4SSDR /* Ser. port 4 SSP Data Reg. */ \ (*((volatile Word *) io_p2v (_Ser4SSDR))) #define Ser4SSSR /* Ser. port 4 SSP Status Reg. */ \ (*((volatile Word *) io_p2v (_Ser4SSSR))) #endif /* LANGUAGE == C */ #define SSCR0_DSS Fld (4, 0) /* Data Size - 1 Select [3..15] */ #define SSCR0_DataSize(Size) /* Data Size Select [4..16] */ \ (((Size) - 1) << FShft (SSCR0_DSS)) #define SSCR0_FRF Fld (2, 4) /* FRame Format */ #define SSCR0_Motorola /* Motorola Serial Peripheral */ \ /* Interface (SPI) format */ \ (0 << FShft (SSCR0_FRF)) #define SSCR0_TI /* Texas Instruments Synchronous */ \ /* Serial format */ \ (1 << FShft (SSCR0_FRF)) #define SSCR0_National /* National Microwire format */ \ (2 << FShft (SSCR0_FRF)) #define SSCR0_SSE 0x00000080 /* SSP Enable */ #define SSCR0_SCR Fld (8, 8) /* Serial Clock Rate divisor/2 - 1 */ /* fss = fxtl/(2*(SCR + 1)) */ /* Tss = 2*(SCR + 1)*Txtl */ #define SSCR0_SerClkDiv(Div) /* Serial Clock Divisor [2..512] */ \ (((Div) - 2)/2 << FShft (SSCR0_SCR)) /* fss = fxtl/(2*Floor (Div/2)) */ /* Tss = 2*Floor (Div/2)*Txtl */ #define SSCR0_CeilSerClkDiv(Div) /* Ceil. of SerClkDiv [2..512] */ \ (((Div) - 1)/2 << FShft (SSCR0_SCR)) /* fss = fxtl/(2*Ceil (Div/2)) */ /* Tss = 2*Ceil (Div/2)*Txtl */ #define SSCR1_RIE 0x00000001 /* Receive FIFO 1/2-full or more */ /* Interrupt Enable */ #define SSCR1_TIE 0x00000002 /* Transmit FIFO 1/2-full or less */ /* Interrupt Enable */ #define SSCR1_LBM 0x00000004 /* Look-Back Mode */ #define SSCR1_SPO 0x00000008 /* Sample clock (SCLK) POlarity */ #define SSCR1_SClkIactL (SSCR1_SPO*0) /* Sample Clock Inactive Low */ #define SSCR1_SClkIactH (SSCR1_SPO*1) /* Sample Clock Inactive High */ #define SSCR1_SP 0x00000010 /* Sample clock (SCLK) Phase */ #define SSCR1_SClk1P (SSCR1_SP*0) /* Sample Clock active 1 Period */ /* after frame (SFRM, 1st edge) */ #define SSCR1_SClk1_2P (SSCR1_SP*1) /* Sample Clock active 1/2 Period */ /* after frame (SFRM, 1st edge) */ #define SSCR1_ECS 0x00000020 /* External Clock Select */ #define SSCR1_IntClk (SSCR1_ECS*0) /* Internal Clock */ #define SSCR1_ExtClk (SSCR1_ECS*1) /* External Clock (GPIO [19]) */ #define SSDR_DATA Fld (16, 0) /* receive/transmit DATA FIFOs */ #define SSSR_TNF 0x00000002 /* Transmit FIFO Not Full (read) */ #define SSSR_RNE 0x00000004 /* Receive FIFO Not Empty (read) */ #define SSSR_BSY 0x00000008 /* SSP BuSY (read) */ #define SSSR_TFS 0x00000010 /* Transmit FIFO 1/2-full or less */ /* Service request (read) */ #define SSSR_RFS 0x00000020 /* Receive FIFO 1/2-full or more */ /* Service request (read) */ #define SSSR_ROR 0x00000040 /* Receive FIFO Over-Run */ /* * Operating System (OS) timer control registers * * Registers * OSMR0 Operating System (OS) timer Match Register 0 * (read/write). * OSMR1 Operating System (OS) timer Match Register 1 * (read/write). * OSMR2 Operating System (OS) timer Match Register 2 * (read/write). * OSMR3 Operating System (OS) timer Match Register 3 * (read/write). * OSCR Operating System (OS) timer Counter Register * (read/write). * OSSR Operating System (OS) timer Status Register * (read/write). * OWER Operating System (OS) timer Watch-dog Enable Register * (read/write). * OIER Operating System (OS) timer Interrupt Enable Register * (read/write). */ #define _OSMR(Nb) /* OS timer Match Reg. [0..3] */ \ (0x90000000 + (Nb)*4) #define _OSMR0 _OSMR (0) /* OS timer Match Reg. 0 */ #define _OSMR1 _OSMR (1) /* OS timer Match Reg. 1 */ #define _OSMR2 _OSMR (2) /* OS timer Match Reg. 2 */ #define _OSMR3 _OSMR (3) /* OS timer Match Reg. 3 */ #define _OSCR 0x90000010 /* OS timer Counter Reg. */ #define _OSSR 0x90000014 /* OS timer Status Reg. */ #define _OWER 0x90000018 /* OS timer Watch-dog Enable Reg. */ #define _OIER 0x9000001C /* OS timer Interrupt Enable Reg. */ #if LANGUAGE == C #define OSMR /* OS timer Match Reg. [0..3] */ \ ((volatile Word *) io_p2v (_OSMR (0))) #define OSMR0 (OSMR [0]) /* OS timer Match Reg. 0 */ #define OSMR1 (OSMR [1]) /* OS timer Match Reg. 1 */ #define OSMR2 (OSMR [2]) /* OS timer Match Reg. 2 */ #define OSMR3 (OSMR [3]) /* OS timer Match Reg. 3 */ #define OSCR /* OS timer Counter Reg. */ \ (*((volatile Word *) io_p2v (_OSCR))) #define OSSR /* OS timer Status Reg. */ \ (*((volatile Word *) io_p2v (_OSSR))) #define OWER /* OS timer Watch-dog Enable Reg. */ \ (*((volatile Word *) io_p2v (_OWER))) #define OIER /* OS timer Interrupt Enable Reg. */ \ (*((volatile Word *) io_p2v (_OIER))) #endif /* LANGUAGE == C */ #define OSSR_M(Nb) /* Match detected [0..3] */ \ (0x00000001 << (Nb)) #define OSSR_M0 OSSR_M (0) /* Match detected 0 */ #define OSSR_M1 OSSR_M (1) /* Match detected 1 */ #define OSSR_M2 OSSR_M (2) /* Match detected 2 */ #define OSSR_M3 OSSR_M (3) /* Match detected 3 */ #define OWER_WME 0x00000001 /* Watch-dog Match Enable */ /* (set only) */ #define OIER_E(Nb) /* match interrupt Enable [0..3] */ \ (0x00000001 << (Nb)) #define OIER_E0 OIER_E (0) /* match interrupt Enable 0 */ #define OIER_E1 OIER_E (1) /* match interrupt Enable 1 */ #define OIER_E2 OIER_E (2) /* match interrupt Enable 2 */ #define OIER_E3 OIER_E (3) /* match interrupt Enable 3 */ /* * Real-Time Clock (RTC) control registers * * Registers * RTAR Real-Time Clock (RTC) Alarm Register (read/write). * RCNR Real-Time Clock (RTC) CouNt Register (read/write). * RTTR Real-Time Clock (RTC) Trim Register (read/write). * RTSR Real-Time Clock (RTC) Status Register (read/write). * * Clocks * frtx, Trtx Frequency, period of the real-time clock crystal * (32.768 kHz nominal). * frtc, Trtc Frequency, period of the real-time clock counter * (1 Hz nominal). */ #define _RTAR 0x90010000 /* RTC Alarm Reg. */ #define _RCNR 0x90010004 /* RTC CouNt Reg. */ #define _RTTR 0x90010008 /* RTC Trim Reg. */ #define _RTSR 0x90010010 /* RTC Status Reg. */ #if LANGUAGE == C #define RTAR /* RTC Alarm Reg. */ \ (*((volatile Word *) io_p2v (_RTAR))) #define RCNR /* RTC CouNt Reg. */ \ (*((volatile Word *) io_p2v (_RCNR))) #define RTTR /* RTC Trim Reg. */ \ (*((volatile Word *) io_p2v (_RTTR))) #define RTSR /* RTC Status Reg. */ \ (*((volatile Word *) io_p2v (_RTSR))) #endif /* LANGUAGE == C */ #define RTTR_C Fld (16, 0) /* clock divider Count - 1 */ #define RTTR_D Fld (10, 16) /* trim Delete count */ /* frtc = (1023*(C + 1) - D)*frtx/ */ /* (1023*(C + 1)^2) */ /* Trtc = (1023*(C + 1)^2)*Trtx/ */ /* (1023*(C + 1) - D) */ #define RTSR_AL 0x00000001 /* ALarm detected */ #define RTSR_HZ 0x00000002 /* 1 Hz clock detected */ #define RTSR_ALE 0x00000004 /* ALarm interrupt Enable */ #define RTSR_HZE 0x00000008 /* 1 Hz clock interrupt Enable */ /* * Power Manager (PM) control registers * * Registers * PMCR Power Manager (PM) Control Register (read/write). * PSSR Power Manager (PM) Sleep Status Register (read/write). * PSPR Power Manager (PM) Scratch-Pad Register (read/write). * PWER Power Manager (PM) Wake-up Enable Register * (read/write). * PCFR Power Manager (PM) general ConFiguration Register * (read/write). * PPCR Power Manager (PM) Phase-Locked Loop (PLL) * Configuration Register (read/write). * PGSR Power Manager (PM) General-Purpose Input/Output (GPIO) * Sleep state Register (read/write, see GPIO pins). * POSR Power Manager (PM) Oscillator Status Register (read). * * Clocks * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz * or 3.5795 MHz). * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). */ #define _PMCR 0x90020000 /* PM Control Reg. */ #define _PSSR 0x90020004 /* PM Sleep Status Reg. */ #define _PSPR 0x90020008 /* PM Scratch-Pad Reg. */ #define _PWER 0x9002000C /* PM Wake-up Enable Reg. */ #define _PCFR 0x90020010 /* PM general ConFiguration Reg. */ #define _PPCR 0x90020014 /* PM PLL Configuration Reg. */ #define _PGSR 0x90020018 /* PM GPIO Sleep state Reg. */ #define _POSR 0x9002001C /* PM Oscillator Status Reg. */ #if LANGUAGE == C #define PMCR /* PM Control Reg. */ \ (*((volatile Word *) io_p2v (_PMCR))) #define PSSR /* PM Sleep Status Reg. */ \ (*((volatile Word *) io_p2v (_PSSR))) #define PSPR /* PM Scratch-Pad Reg. */ \ (*((volatile Word *) io_p2v (_PSPR))) #define PWER /* PM Wake-up Enable Reg. */ \ (*((volatile Word *) io_p2v (_PWER))) #define PCFR /* PM general ConFiguration Reg. */ \ (*((volatile Word *) io_p2v (_PCFR))) #define PPCR /* PM PLL Configuration Reg. */ \ (*((volatile Word *) io_p2v (_PPCR))) #define PGSR /* PM GPIO Sleep state Reg. */ \ (*((volatile Word *) io_p2v (_PGSR))) #define POSR /* PM Oscillator Status Reg. */ \ (*((volatile Word *) io_p2v (_POSR))) #endif /* LANGUAGE == C */ #define PMCR_SF 0x00000001 /* Sleep Force (set only) */ #define PSSR_SS 0x00000001 /* Software Sleep */ #define PSSR_BFS 0x00000002 /* Battery Fault Status */ /* (BATT_FAULT) */ #define PSSR_VFS 0x00000004 /* Vdd Fault Status (VDD_FAULT) */ #define PSSR_DH 0x00000008 /* DRAM control Hold */ #define PSSR_PH 0x00000010 /* Peripheral control Hold */ #define PWER_GPIO(Nb) GPIO_GPIO (Nb) /* GPIO [0..27] wake-up enable */ #define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */ #define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */ #define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */ #define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */ #define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */ #define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */ #define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */ #define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */ #define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */ #define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */ #define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */ #define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */ #define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */ #define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */ #define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */ #define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */ #define PWER_GPIO16 PWER_GPIO (16) /* GPIO [16] wake-up enable */ #define PWER_GPIO17 PWER_GPIO (17) /* GPIO [17] wake-up enable */ #define PWER_GPIO18 PWER_GPIO (18) /* GPIO [18] wake-up enable */ #define PWER_GPIO19 PWER_GPIO (19) /* GPIO [19] wake-up enable */ #define PWER_GPIO20 PWER_GPIO (20) /* GPIO [20] wake-up enable */ #define PWER_GPIO21 PWER_GPIO (21) /* GPIO [21] wake-up enable */ #define PWER_GPIO22 PWER_GPIO (22) /* GPIO [22] wake-up enable */ #define PWER_GPIO23 PWER_GPIO (23) /* GPIO [23] wake-up enable */ #define PWER_GPIO24 PWER_GPIO (24) /* GPIO [24] wake-up enable */ #define PWER_GPIO25 PWER_GPIO (25) /* GPIO [25] wake-up enable */ #define PWER_GPIO26 PWER_GPIO (26) /* GPIO [26] wake-up enable */ #define PWER_GPIO27 PWER_GPIO (27) /* GPIO [27] wake-up enable */ #define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */ #define PCFR_OPDE 0x00000001 /* Oscillator Power-Down Enable */ #define PCFR_ClkRun (PCFR_OPDE*0) /* Clock Running in sleep mode */ #define PCFR_ClkStp (PCFR_OPDE*1) /* Clock Stopped in sleep mode */ #define PCFR_FP 0x00000002 /* Float PCMCIA pins */ #define PCFR_PCMCIANeg (PCFR_FP*0) /* PCMCIA pins Negated (1) */ #define PCFR_PCMCIAFlt (PCFR_FP*1) /* PCMCIA pins Floating */ #define PCFR_FS 0x00000004 /* Float Static memory pins */ #define PCFR_StMemNeg (PCFR_FS*0) /* Static Memory pins Negated (1) */ #define PCFR_StMemFlt (PCFR_FS*1) /* Static Memory pins Floating */ #define PCFR_FO 0x00000008 /* Force RTC oscillator */ /* (32.768 kHz) enable On */ #define PPCR_CCF Fld (5, 0) /* CPU core Clock (CCLK) Freq. */ #define PPCR_Fx16 /* Freq. x 16 (fcpu = 16*fxtl) */ \ (0x00 << FShft (PPCR_CCF)) #define PPCR_Fx20 /* Freq. x 20 (fcpu = 20*fxtl) */ \ (0x01 << FShft (PPCR_CCF)) #define PPCR_Fx24 /* Freq. x 24 (fcpu = 24*fxtl) */ \ (0x02 << FShft (PPCR_CCF)) #define PPCR_Fx28 /* Freq. x 28 (fcpu = 28*fxtl) */ \ (0x03 << FShft (PPCR_CCF)) #define PPCR_Fx32 /* Freq. x 32 (fcpu = 32*fxtl) */ \ (0x04 << FShft (PPCR_CCF)) #define PPCR_Fx36 /* Freq. x 36 (fcpu = 36*fxtl) */ \ (0x05 << FShft (PPCR_CCF)) #define PPCR_Fx40 /* Freq. x 40 (fcpu = 40*fxtl) */ \ (0x06 << FShft (PPCR_CCF)) #define PPCR_Fx44 /* Freq. x 44 (fcpu = 44*fxtl) */ \ (0x07 << FShft (PPCR_CCF)) #define PPCR_Fx48 /* Freq. x 48 (fcpu = 48*fxtl) */ \ (0x08 << FShft (PPCR_CCF)) #define PPCR_Fx52 /* Freq. x 52 (fcpu = 52*fxtl) */ \ (0x09 << FShft (PPCR_CCF)) #define PPCR_Fx56 /* Freq. x 56 (fcpu = 56*fxtl) */ \ (0x0A << FShft (PPCR_CCF)) #define PPCR_Fx60 /* Freq. x 60 (fcpu = 60*fxtl) */ \ (0x0B << FShft (PPCR_CCF)) #define PPCR_Fx64 /* Freq. x 64 (fcpu = 64*fxtl) */ \ (0x0C << FShft (PPCR_CCF)) #define PPCR_Fx68 /* Freq. x 68 (fcpu = 68*fxtl) */ \ (0x0D << FShft (PPCR_CCF)) #define PPCR_Fx72 /* Freq. x 72 (fcpu = 72*fxtl) */ \ (0x0E << FShft (PPCR_CCF)) #define PPCR_Fx76 /* Freq. x 76 (fcpu = 76*fxtl) */ \ (0x0F << FShft (PPCR_CCF)) /* 3.6864 MHz crystal (fxtl): */ #define PPCR_F59_0MHz PPCR_Fx16 /* Freq. (fcpu) = 59.0 MHz */ #define PPCR_F73_7MHz PPCR_Fx20 /* Freq. (fcpu) = 73.7 MHz */ #define PPCR_F88_5MHz PPCR_Fx24 /* Freq. (fcpu) = 88.5 MHz */ #define PPCR_F103_2MHz PPCR_Fx28 /* Freq. (fcpu) = 103.2 MHz */ #define PPCR_F118_0MHz PPCR_Fx32 /* Freq. (fcpu) = 118.0 MHz */ #define PPCR_F132_7MHz PPCR_Fx36 /* Freq. (fcpu) = 132.7 MHz */ #define PPCR_F147_5MHz PPCR_Fx40 /* Freq. (fcpu) = 147.5 MHz */ #define PPCR_F162_2MHz PPCR_Fx44 /* Freq. (fcpu) = 162.2 MHz */ #define PPCR_F176_9MHz PPCR_Fx48 /* Freq. (fcpu) = 176.9 MHz */ #define PPCR_F191_7MHz PPCR_Fx52 /* Freq. (fcpu) = 191.7 MHz */ #define PPCR_F206_4MHz PPCR_Fx56 /* Freq. (fcpu) = 206.4 MHz */ #define PPCR_F221_2MHz PPCR_Fx60 /* Freq. (fcpu) = 221.2 MHz */ #define PPCR_F239_6MHz PPCR_Fx64 /* Freq. (fcpu) = 239.6 MHz */ #define PPCR_F250_7MHz PPCR_Fx68 /* Freq. (fcpu) = 250.7 MHz */ #define PPCR_F265_4MHz PPCR_Fx72 /* Freq. (fcpu) = 265.4 MHz */ #define PPCR_F280_2MHz PPCR_Fx76 /* Freq. (fcpu) = 280.2 MHz */ /* 3.5795 MHz crystal (fxtl): */ #define PPCR_F57_3MHz PPCR_Fx16 /* Freq. (fcpu) = 57.3 MHz */ #define PPCR_F71_6MHz PPCR_Fx20 /* Freq. (fcpu) = 71.6 MHz */ #define PPCR_F85_9MHz PPCR_Fx24 /* Freq. (fcpu) = 85.9 MHz */ #define PPCR_F100_2MHz PPCR_Fx28 /* Freq. (fcpu) = 100.2 MHz */ #define PPCR_F114_5MHz PPCR_Fx32 /* Freq. (fcpu) = 114.5 MHz */ #define PPCR_F128_9MHz PPCR_Fx36 /* Freq. (fcpu) = 128.9 MHz */ #define PPCR_F143_2MHz PPCR_Fx40 /* Freq. (fcpu) = 143.2 MHz */ #define PPCR_F157_5MHz PPCR_Fx44 /* Freq. (fcpu) = 157.5 MHz */ #define PPCR_F171_8MHz PPCR_Fx48 /* Freq. (fcpu) = 171.8 MHz */ #define PPCR_F186_1MHz PPCR_Fx52 /* Freq. (fcpu) = 186.1 MHz */ #define PPCR_F200_5MHz PPCR_Fx56 /* Freq. (fcpu) = 200.5 MHz */ #define PPCR_F214_8MHz PPCR_Fx60 /* Freq. (fcpu) = 214.8 MHz */ #define PPCR_F229_1MHz PPCR_Fx64 /* Freq. (fcpu) = 229.1 MHz */ #define PPCR_F243_4MHz PPCR_Fx68 /* Freq. (fcpu) = 243.4 MHz */ #define PPCR_F257_7MHz PPCR_Fx72 /* Freq. (fcpu) = 257.7 MHz */ #define PPCR_F272_0MHz PPCR_Fx76 /* Freq. (fcpu) = 272.0 MHz */ #define POSR_OOK 0x00000001 /* RTC Oscillator (32.768 kHz) OK */ /* * Reset Controller (RC) control registers * * Registers * RSRR Reset Controller (RC) Software Reset Register * (read/write). * RCSR Reset Controller (RC) Status Register (read/write). */ #define _RSRR 0x90030000 /* RC Software Reset Reg. */ #define _RCSR 0x90030004 /* RC Status Reg. */ #if LANGUAGE == C #define RSRR /* RC Software Reset Reg. */ \ (*((volatile Word *) io_p2v (_RSRR))) #define RCSR /* RC Status Reg. */ \ (*((volatile Word *) io_p2v (_RCSR))) #endif /* LANGUAGE == C */ #define RSRR_SWR 0x00000001 /* SoftWare Reset (set only) */ #define RCSR_HWR 0x00000001 /* HardWare Reset */ #define RCSR_SWR 0x00000002 /* SoftWare Reset */ #define RCSR_WDR 0x00000004 /* Watch-Dog Reset */ #define RCSR_SMR 0x00000008 /* Sleep-Mode Reset */ /* * Test unit control registers * * Registers * TUCR Test Unit Control Register (read/write). */ #define _TUCR 0x90030008 /* Test Unit Control Reg. */ #if LANGUAGE == C #define TUCR /* Test Unit Control Reg. */ \ (*((volatile Word *) io_p2v (_TUCR))) #endif /* LANGUAGE == C */ #define TUCR_TIC 0x00000040 /* TIC mode */ #define TUCR_TTST 0x00000080 /* Trim TeST mode */ #define TUCR_RCRC 0x00000100 /* Richard's Cyclic Redundancy */ /* Check */ #define TUCR_PMD 0x00000200 /* Power Management Disable */ #define TUCR_MR 0x00000400 /* Memory Request mode */ #define TUCR_NoMB (TUCR_MR*0) /* No Memory Bus request & grant */ #define TUCR_MBGPIO (TUCR_MR*1) /* Memory Bus request (MBREQ) & */ /* grant (MBGNT) on GPIO [22:21] */ #define TUCR_CTB Fld (3, 20) /* Clock Test Bits */ #define TUCR_FDC 0x00800000 /* RTC Force Delete Count */ #define TUCR_FMC 0x01000000 /* Force Michelle's Control mode */ #define TUCR_TMC 0x02000000 /* RTC Trimmer Multiplexer Control */ #define TUCR_DPS 0x04000000 /* Disallow Pad Sleep */ #define TUCR_TSEL Fld (3, 29) /* clock Test SELect on GPIO [27] */ #define TUCR_32_768kHz /* 32.768 kHz osc. on GPIO [27] */ \ (0 << FShft (TUCR_TSEL)) #define TUCR_3_6864MHz /* 3.6864 MHz osc. on GPIO [27] */ \ (1 << FShft (TUCR_TSEL)) #define TUCR_VDD /* VDD ring osc./16 on GPIO [27] */ \ (2 << FShft (TUCR_TSEL)) #define TUCR_96MHzPLL /* 96 MHz PLL/4 on GPIO [27] */ \ (3 << FShft (TUCR_TSEL)) #define TUCR_Clock /* internal (fcpu/2) & 32.768 kHz */ \ /* Clocks on GPIO [26:27] */ \ (4 << FShft (TUCR_TSEL)) #define TUCR_3_6864MHzA /* 3.6864 MHz osc. on GPIO [27] */ \ /* (Alternative) */ \ (5 << FShft (TUCR_TSEL)) #define TUCR_MainPLL /* Main PLL/16 on GPIO [27] */ \ (6 << FShft (TUCR_TSEL)) #define TUCR_VDDL /* VDDL ring osc./4 on GPIO [27] */ \ (7 << FShft (TUCR_TSEL)) /* * General-Purpose Input/Output (GPIO) control registers * * Registers * GPLR General-Purpose Input/Output (GPIO) Pin Level * Register (read). * GPDR General-Purpose Input/Output (GPIO) Pin Direction * Register (read/write). * GPSR General-Purpose Input/Output (GPIO) Pin output Set * Register (write). * GPCR General-Purpose Input/Output (GPIO) Pin output Clear * Register (write). * GRER General-Purpose Input/Output (GPIO) Rising-Edge * detect Register (read/write). * GFER General-Purpose Input/Output (GPIO) Falling-Edge * detect Register (read/write). * GEDR General-Purpose Input/Output (GPIO) Edge Detect * status Register (read/write). * GAFR General-Purpose Input/Output (GPIO) Alternate * Function Register (read/write). * * Clock * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). */ #define _GPLR 0x90040000 /* GPIO Pin Level Reg. */ #define _GPDR 0x90040004 /* GPIO Pin Direction Reg. */ #define _GPSR 0x90040008 /* GPIO Pin output Set Reg. */ #define _GPCR 0x9004000C /* GPIO Pin output Clear Reg. */ #define _GRER 0x90040010 /* GPIO Rising-Edge detect Reg. */ #define _GFER 0x90040014 /* GPIO Falling-Edge detect Reg. */ #define _GEDR 0x90040018 /* GPIO Edge Detect status Reg. */ #define _GAFR 0x9004001C /* GPIO Alternate Function Reg. */ #if LANGUAGE == C #define GPLR /* GPIO Pin Level Reg. */ \ (*((volatile Word *) io_p2v (_GPLR))) #define GPDR /* GPIO Pin Direction Reg. */ \ (*((volatile Word *) io_p2v (_GPDR))) #define GPSR /* GPIO Pin output Set Reg. */ \ (*((volatile Word *) io_p2v (_GPSR))) #define GPCR /* GPIO Pin output Clear Reg. */ \ (*((volatile Word *) io_p2v (_GPCR))) #define GRER /* GPIO Rising-Edge detect Reg. */ \ (*((volatile Word *) io_p2v (_GRER))) #define GFER /* GPIO Falling-Edge detect Reg. */ \ (*((volatile Word *) io_p2v (_GFER))) #define GEDR /* GPIO Edge Detect status Reg. */ \ (*((volatile Word *) io_p2v (_GEDR))) #define GAFR /* GPIO Alternate Function Reg. */ \ (*((volatile Word *) io_p2v (_GAFR))) #endif /* LANGUAGE == C */ #define GPIO_MIN (0) #define GPIO_MAX (27) #define GPIO_GPIO(Nb) /* GPIO [0..27] */ \ (0x00000001 << (Nb)) #define GPIO_GPIO0 GPIO_GPIO (0) /* GPIO [0] */ #define GPIO_GPIO1 GPIO_GPIO (1) /* GPIO [1] */ #define GPIO_GPIO2 GPIO_GPIO (2) /* GPIO [2] */ #define GPIO_GPIO3 GPIO_GPIO (3) /* GPIO [3] */ #define GPIO_GPIO4 GPIO_GPIO (4) /* GPIO [4] */ #define GPIO_GPIO5 GPIO_GPIO (5) /* GPIO [5] */ #define GPIO_GPIO6 GPIO_GPIO (6) /* GPIO [6] */ #define GPIO_GPIO7 GPIO_GPIO (7) /* GPIO [7] */ #define GPIO_GPIO8 GPIO_GPIO (8) /* GPIO [8] */ #define GPIO_GPIO9 GPIO_GPIO (9) /* GPIO [9] */ #define GPIO_GPIO10 GPIO_GPIO (10) /* GPIO [10] */ #define GPIO_GPIO11 GPIO_GPIO (11) /* GPIO [11] */ #define GPIO_GPIO12 GPIO_GPIO (12) /* GPIO [12] */ #define GPIO_GPIO13 GPIO_GPIO (13) /* GPIO [13] */ #define GPIO_GPIO14 GPIO_GPIO (14) /* GPIO [14] */ #define GPIO_GPIO15 GPIO_GPIO (15) /* GPIO [15] */ #define GPIO_GPIO16 GPIO_GPIO (16) /* GPIO [16] */ #define GPIO_GPIO17 GPIO_GPIO (17) /* GPIO [17] */ #define GPIO_GPIO18 GPIO_GPIO (18) /* GPIO [18] */ #define GPIO_GPIO19 GPIO_GPIO (19) /* GPIO [19] */ #define GPIO_GPIO20 GPIO_GPIO (20) /* GPIO [20] */ #define GPIO_GPIO21 GPIO_GPIO (21) /* GPIO [21] */ #define GPIO_GPIO22 GPIO_GPIO (22) /* GPIO [22] */ #define GPIO_GPIO23 GPIO_GPIO (23) /* GPIO [23] */ #define GPIO_GPIO24 GPIO_GPIO (24) /* GPIO [24] */ #define GPIO_GPIO25 GPIO_GPIO (25) /* GPIO [25] */ #define GPIO_GPIO26 GPIO_GPIO (26) /* GPIO [26] */ #define GPIO_GPIO27 GPIO_GPIO (27) /* GPIO [27] */ #define GPIO_LDD(Nb) /* LCD Data [8..15] (O) */ \ GPIO_GPIO ((Nb) - 6) #define GPIO_LDD8 GPIO_LDD (8) /* LCD Data [8] (O) */ #define GPIO_LDD9 GPIO_LDD (9) /* LCD Data [9] (O) */ #define GPIO_LDD10 GPIO_LDD (10) /* LCD Data [10] (O) */ #define GPIO_LDD11 GPIO_LDD (11) /* LCD Data [11] (O) */ #define GPIO_LDD12 GPIO_LDD (12) /* LCD Data [12] (O) */ #define GPIO_LDD13 GPIO_LDD (13) /* LCD Data [13] (O) */ #define GPIO_LDD14 GPIO_LDD (14) /* LCD Data [14] (O) */ #define GPIO_LDD15 GPIO_LDD (15) /* LCD Data [15] (O) */ /* ser. port 4: */ #define GPIO_SSP_TXD GPIO_GPIO (10) /* SSP Transmit Data (O) */ #define GPIO_SSP_RXD GPIO_GPIO (11) /* SSP Receive Data (I) */ #define GPIO_SSP_SCLK GPIO_GPIO (12) /* SSP Sample CLocK (O) */ #define GPIO_SSP_SFRM GPIO_GPIO (13) /* SSP Sample FRaMe (O) */ /* ser. port 1: */ #define GPIO_UART_TXD GPIO_GPIO (14) /* UART Transmit Data (O) */ #define GPIO_UART_RXD GPIO_GPIO (15) /* UART Receive Data (I) */ #define GPIO_SDLC_SCLK GPIO_GPIO (16) /* SDLC Sample CLocK (I/O) */ #define GPIO_SDLC_AAF GPIO_GPIO (17) /* SDLC Abort After Frame (O) */ #define GPIO_UART_SCLK1 GPIO_GPIO (18) /* UART Sample CLocK 1 (I) */ /* ser. port 4: */ #define GPIO_SSP_CLK GPIO_GPIO (19) /* SSP external CLocK (I) */ /* ser. port 3: */ #define GPIO_UART_SCLK3 GPIO_GPIO (20) /* UART Sample CLocK 3 (I) */ /* ser. port 4: */ #define GPIO_MCP_CLK GPIO_GPIO (21) /* MCP CLocK (I) */ /* test controller: */ #define GPIO_TIC_ACK GPIO_GPIO (21) /* TIC ACKnowledge (O) */ #define GPIO_MBGNT GPIO_GPIO (21) /* Memory Bus GraNT (O) */ #define GPIO_TREQA GPIO_GPIO (22) /* TIC REQuest A (I) */ #define GPIO_MBREQ GPIO_GPIO (22) /* Memory Bus REQuest (I) */ #define GPIO_TREQB GPIO_GPIO (23) /* TIC REQuest B (I) */ #define GPIO_1Hz GPIO_GPIO (25) /* 1 Hz clock (O) */ #define GPIO_RCLK GPIO_GPIO (26) /* internal (R) CLocK (O, fcpu/2) */ #define GPIO_32_768kHz GPIO_GPIO (27) /* 32.768 kHz clock (O, RTC) */ #define GPDR_In 0 /* Input */ #define GPDR_Out 1 /* Output */ /* * Interrupt Controller (IC) control registers * * Registers * ICIP Interrupt Controller (IC) Interrupt ReQuest (IRQ) * Pending register (read). * ICMR Interrupt Controller (IC) Mask Register (read/write). * ICLR Interrupt Controller (IC) Level Register (read/write). * ICCR Interrupt Controller (IC) Control Register * (read/write). * [The ICCR register is only implemented in versions 2.0 * (rev. = 8) and higher of the StrongARM SA-1100.] * ICFP Interrupt Controller (IC) Fast Interrupt reQuest * (FIQ) Pending register (read). * ICPR Interrupt Controller (IC) Pending Register (read). * [The ICPR register is active low (inverted) in * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the * StrongARM SA-1100, it is active high (non-inverted) in * versions 2.0 (rev. = 8) and higher.] */ #define _ICIP 0x90050000 /* IC IRQ Pending reg. */ #define _ICMR 0x90050004 /* IC Mask Reg. */ #define _ICLR 0x90050008 /* IC Level Reg. */ #define _ICCR 0x9005000C /* IC Control Reg. */ #define _ICFP 0x90050010 /* IC FIQ Pending reg. */ #define _ICPR 0x90050020 /* IC Pending Reg. */ #if LANGUAGE == C #define ICIP /* IC IRQ Pending reg. */ \ (*((volatile Word *) io_p2v (_ICIP))) #define ICMR /* IC Mask Reg. */ \ (*((volatile Word *) io_p2v (_ICMR))) #define ICLR /* IC Level Reg. */ \ (*((volatile Word *) io_p2v (_ICLR))) #define ICCR /* IC Control Reg. */ \ (*((volatile Word *) io_p2v (_ICCR))) #define ICFP /* IC FIQ Pending reg. */ \ (*((volatile Word *) io_p2v (_ICFP))) #define ICPR /* IC Pending Reg. */ \ (*((volatile Word *) io_p2v (_ICPR))) #endif /* LANGUAGE == C */ #define IC_GPIO(Nb) /* GPIO [0..10] */ \ (0x00000001 << (Nb)) #define IC_GPIO0 IC_GPIO (0) /* GPIO [0] */ #define IC_GPIO1 IC_GPIO (1) /* GPIO [1] */ #define IC_GPIO2 IC_GPIO (2) /* GPIO [2] */ #define IC_GPIO3 IC_GPIO (3) /* GPIO [3] */ #define IC_GPIO4 IC_GPIO (4) /* GPIO [4] */ #define IC_GPIO5 IC_GPIO (5) /* GPIO [5] */ #define IC_GPIO6 IC_GPIO (6) /* GPIO [6] */ #define IC_GPIO7 IC_GPIO (7) /* GPIO [7] */ #define IC_GPIO8 IC_GPIO (8) /* GPIO [8] */ #define IC_GPIO9 IC_GPIO (9) /* GPIO [9] */ #define IC_GPIO10 IC_GPIO (10) /* GPIO [10] */ #define IC_GPIO11_27 0x00000800 /* GPIO [11:27] (ORed) */ #define IC_LCD 0x00001000 /* LCD controller */ #define IC_Ser0UDC 0x00002000 /* Ser. port 0 UDC */ #define IC_Ser1SDLC 0x00004000 /* Ser. port 1 SDLC */ #define IC_Ser1UART 0x00008000 /* Ser. port 1 UART */ #define IC_Ser2ICP 0x00010000 /* Ser. port 2 ICP */ #define IC_Ser3UART 0x00020000 /* Ser. port 3 UART */ #define IC_Ser4MCP 0x00040000 /* Ser. port 4 MCP */ #define IC_Ser4SSP 0x00080000 /* Ser. port 4 SSP */ #define IC_DMA(Nb) /* DMA controller channel [0..5] */ \ (0x00100000 << (Nb)) #define IC_DMA0 IC_DMA (0) /* DMA controller channel 0 */ #define IC_DMA1 IC_DMA (1) /* DMA controller channel 1 */ #define IC_DMA2 IC_DMA (2) /* DMA controller channel 2 */ #define IC_DMA3 IC_DMA (3) /* DMA controller channel 3 */ #define IC_DMA4 IC_DMA (4) /* DMA controller channel 4 */ #define IC_DMA5 IC_DMA (5) /* DMA controller channel 5 */ #define IC_OST(Nb) /* OS Timer match [0..3] */ \ (0x04000000 << (Nb)) #define IC_OST0 IC_OST (0) /* OS Timer match 0 */ #define IC_OST1 IC_OST (1) /* OS Timer match 1 */ #define IC_OST2 IC_OST (2) /* OS Timer match 2 */ #define IC_OST3 IC_OST (3) /* OS Timer match 3 */ #define IC_RTC1Hz 0x40000000 /* RTC 1 Hz clock */ #define IC_RTCAlrm 0x80000000 /* RTC Alarm */ #define ICLR_IRQ 0 /* Interrupt ReQuest */ #define ICLR_FIQ 1 /* Fast Interrupt reQuest */ #define ICCR_DIM 0x00000001 /* Disable Idle-mode interrupt */ /* Mask */ #define ICCR_IdleAllInt (ICCR_DIM*0) /* Idle-mode All Interrupt enable */ /* (ICMR ignored) */ #define ICCR_IdleMskInt (ICCR_DIM*1) /* Idle-mode non-Masked Interrupt */ /* enable (ICMR used) */ /* * Peripheral Pin Controller (PPC) control registers * * Registers * PPDR Peripheral Pin Controller (PPC) Pin Direction * Register (read/write). * PPSR Peripheral Pin Controller (PPC) Pin State Register * (read/write). * PPAR Peripheral Pin Controller (PPC) Pin Assignment * Register (read/write). * PSDR Peripheral Pin Controller (PPC) Sleep-mode pin * Direction Register (read/write). * PPFR Peripheral Pin Controller (PPC) Pin Flag Register * (read). */ #define _PPDR 0x90060000 /* PPC Pin Direction Reg. */ #define _PPSR 0x90060004 /* PPC Pin State Reg. */ #define _PPAR 0x90060008 /* PPC Pin Assignment Reg. */ #define _PSDR 0x9006000C /* PPC Sleep-mode pin Direction */ /* Reg. */ #define _PPFR 0x90060010 /* PPC Pin Flag Reg. */ #if LANGUAGE == C #define PPDR /* PPC Pin Direction Reg. */ \ (*((volatile Word *) io_p2v (_PPDR))) #define PPSR /* PPC Pin State Reg. */ \ (*((volatile Word *) io_p2v (_PPSR))) #define PPAR /* PPC Pin Assignment Reg. */ \ (*((volatile Word *) io_p2v (_PPAR))) #define PSDR /* PPC Sleep-mode pin Direction */ \ /* Reg. */ \ (*((volatile Word *) io_p2v (_PSDR))) #define PPFR /* PPC Pin Flag Reg. */ \ (*((volatile Word *) io_p2v (_PPFR))) #endif /* LANGUAGE == C */ #define PPC_LDD(Nb) /* LCD Data [0..7] */ \ (0x00000001 << (Nb)) #define PPC_LDD0 PPC_LDD (0) /* LCD Data [0] */ #define PPC_LDD1 PPC_LDD (1) /* LCD Data [1] */ #define PPC_LDD2 PPC_LDD (2) /* LCD Data [2] */ #define PPC_LDD3 PPC_LDD (3) /* LCD Data [3] */ #define PPC_LDD4 PPC_LDD (4) /* LCD Data [4] */ #define PPC_LDD5 PPC_LDD (5) /* LCD Data [5] */ #define PPC_LDD6 PPC_LDD (6) /* LCD Data [6] */ #define PPC_LDD7 PPC_LDD (7) /* LCD Data [7] */ #define PPC_L_PCLK 0x00000100 /* LCD Pixel CLocK */ #define PPC_L_LCLK 0x00000200 /* LCD Line CLocK */ #define PPC_L_FCLK 0x00000400 /* LCD Frame CLocK */ #define PPC_L_BIAS 0x00000800 /* LCD AC BIAS */ /* ser. port 1: */ #define PPC_TXD1 0x00001000 /* SDLC/UART Transmit Data 1 */ #define PPC_RXD1 0x00002000 /* SDLC/UART Receive Data 1 */ /* ser. port 2: */ #define PPC_TXD2 0x00004000 /* IPC Transmit Data 2 */ #define PPC_RXD2 0x00008000 /* IPC Receive Data 2 */ /* ser. port 3: */ #define PPC_TXD3 0x00010000 /* UART Transmit Data 3 */ #define PPC_RXD3 0x00020000 /* UART Receive Data 3 */ /* ser. port 4: */ #define PPC_TXD4 0x00040000 /* MCP/SSP Transmit Data 4 */ #define PPC_RXD4 0x00080000 /* MCP/SSP Receive Data 4 */ #define PPC_SCLK 0x00100000 /* MCP/SSP Sample CLocK */ #define PPC_SFRM 0x00200000 /* MCP/SSP Sample FRaMe */ #define PPDR_In 0 /* Input */ #define PPDR_Out 1 /* Output */ /* ser. port 1: */ #define PPAR_UPR 0x00001000 /* UART Pin Reassignment */ #define PPAR_UARTTR (PPAR_UPR*0) /* UART on TXD_1 & RXD_1 */ #define PPAR_UARTGPIO (PPAR_UPR*1) /* UART on GPIO [14:15] */ /* ser. port 4: */ #define PPAR_SPR 0x00040000 /* SSP Pin Reassignment */ #define PPAR_SSPTRSS (PPAR_SPR*0) /* SSP on TXD_C, RXD_C, SCLK_C, */ /* & SFRM_C */ #define PPAR_SSPGPIO (PPAR_SPR*1) /* SSP on GPIO [10:13] */ #define PSDR_OutL 0 /* Output Low in sleep mode */ #define PSDR_Flt 1 /* Floating (input) in sleep mode */ #define PPFR_LCD 0x00000001 /* LCD controller */ #define PPFR_SP1TX 0x00001000 /* Ser. Port 1 SDLC/UART Transmit */ #define PPFR_SP1RX 0x00002000 /* Ser. Port 1 SDLC/UART Receive */ #define PPFR_SP2TX 0x00004000 /* Ser. Port 2 ICP Transmit */ #define PPFR_SP2RX 0x00008000 /* Ser. Port 2 ICP Receive */ #define PPFR_SP3TX 0x00010000 /* Ser. Port 3 UART Transmit */ #define PPFR_SP3RX 0x00020000 /* Ser. Port 3 UART Receive */ #define PPFR_SP4 0x00040000 /* Ser. Port 4 MCP/SSP */ #define PPFR_PerEn 0 /* Peripheral Enabled */ #define PPFR_PPCEn 1 /* PPC Enabled */ /* * Dynamic Random-Access Memory (DRAM) control registers * * Registers * MDCNFG Memory system: Dynamic Random-Access Memory (DRAM) * CoNFiGuration register (read/write). * MDCAS0 Memory system: Dynamic Random-Access Memory (DRAM) * Column Address Strobe (CAS) shift register 0 * (read/write). * MDCAS1 Memory system: Dynamic Random-Access Memory (DRAM) * Column Address Strobe (CAS) shift register 1 * (read/write). * MDCAS2 Memory system: Dynamic Random-Access Memory (DRAM) * Column Address Strobe (CAS) shift register 2 * (read/write). * * Clocks * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2). * fcas, Tcas Frequency, period of the DRAM CAS shift registers. */ /* Memory system: */ #define _MDCNFG 0xA0000000 /* DRAM CoNFiGuration reg. */ #define _MDCAS(Nb) /* DRAM CAS shift reg. [0..3] */ \ (0xA0000004 + (Nb)*4) #define _MDCAS0 _MDCAS (0) /* DRAM CAS shift reg. 0 */ #define _MDCAS1 _MDCAS (1) /* DRAM CAS shift reg. 1 */ #define _MDCAS2 _MDCAS (2) /* DRAM CAS shift reg. 2 */ #if LANGUAGE == C /* Memory system: */ #define MDCNFG /* DRAM CoNFiGuration reg. */ \ (*((volatile Word *) io_p2v (_MDCNFG))) #define MDCAS /* DRAM CAS shift reg. [0..3] */ \ ((volatile Word *) io_p2v (_MDCAS (0))) #define MDCAS0 (MDCAS [0]) /* DRAM CAS shift reg. 0 */ #define MDCAS1 (MDCAS [1]) /* DRAM CAS shift reg. 1 */ #define MDCAS2 (MDCAS [2]) /* DRAM CAS shift reg. 2 */ #endif /* LANGUAGE == C */ /* SA1100 MDCNFG values */ #define MDCNFG_DE(Nb) /* DRAM Enable bank [0..3] */ \ (0x00000001 << (Nb)) #define MDCNFG_DE0 MDCNFG_DE (0) /* DRAM Enable bank 0 */ #define MDCNFG_DE1 MDCNFG_DE (1) /* DRAM Enable bank 1 */ #define MDCNFG_DE2 MDCNFG_DE (2) /* DRAM Enable bank 2 */ #define MDCNFG_DE3 MDCNFG_DE (3) /* DRAM Enable bank 3 */ #define MDCNFG_DRAC Fld (2, 4) /* DRAM Row Address Count - 9 */ #define MDCNFG_RowAdd(Add) /* Row Address count [9..12] */ \ (((Add) - 9) << FShft (MDCNFG_DRAC)) #define MDCNFG_CDB2 0x00000040 /* shift reg. Clock Divide By 2 */ /* (fcas = fcpu/2) */ #define MDCNFG_TRP Fld (4, 7) /* Time RAS Pre-charge - 1 [Tmem] */ #define MDCNFG_PrChrg(Tcpu) /* Pre-Charge time [2..32 Tcpu] */ \ (((Tcpu) - 2)/2 << FShft (MDCNFG_TRP)) #define MDCNFG_CeilPrChrg(Tcpu) /* Ceil. of PrChrg [2..32 Tcpu] */ \ (((Tcpu) - 1)/2 << FShft (MDCNFG_TRP)) #define MDCNFG_TRASR Fld (4, 11) /* Time RAS Refresh - 1 [Tmem] */ #define MDCNFG_Ref(Tcpu) /* Refresh time [2..32 Tcpu] */ \ (((Tcpu) - 2)/2 << FShft (MDCNFG_TRASR)) #define MDCNFG_CeilRef(Tcpu) /* Ceil. of Ref [2..32 Tcpu] */ \ (((Tcpu) - 1)/2 << FShft (MDCNFG_TRASR)) #define MDCNFG_TDL Fld (2, 15) /* Time Data Latch [Tcpu] */ #define MDCNFG_DataLtch(Tcpu) /* Data Latch delay [0..3 Tcpu] */ \ ((Tcpu) << FShft (MDCNFG_TDL)) #define MDCNFG_DRI Fld (15, 17) /* min. DRAM Refresh Interval/4 */ /* [Tmem] */ #define MDCNFG_RefInt(Tcpu) /* min. Refresh Interval */ \ /* [0..262136 Tcpu] */ \ ((Tcpu)/8 << FShft (MDCNFG_DRI)) /* SA1110 MDCNFG values */ #define MDCNFG_SA1110_DE0 0x00000001 /* DRAM Enable bank 0 */ #define MDCNFG_SA1110_DE1 0x00000002 /* DRAM Enable bank 1 */ #define MDCNFG_SA1110_DTIM0 0x00000004 /* DRAM timing type 0/1 */ #define MDCNFG_SA1110_DWID0 0x00000008 /* DRAM bus width 0/1 */ #define MDCNFG_SA1110_DRAC0 Fld(3, 4) /* DRAM row addr bit count */ /* bank 0/1 */ #define MDCNFG_SA1110_CDB20 0x00000080 /* Mem Clock divide by 2 0/1 */ #define MDCNFG_SA1110_TRP0 Fld(3, 8) /* RAS precharge 0/1 */ #define MDCNFG_SA1110_TDL0 Fld(2, 12) /* Data input latch after CAS*/ /* deassertion 0/1 */ #define MDCNFG_SA1110_TWR0 Fld(2, 14) /* SDRAM write recovery 0/1 */ #define MDCNFG_SA1110_DE2 0x00010000 /* DRAM Enable bank 0 */ #define MDCNFG_SA1110_DE3 0x00020000 /* DRAM Enable bank 1 */ #define MDCNFG_SA1110_DTIM2 0x00040000 /* DRAM timing type 0/1 */ #define MDCNFG_SA1110_DWID2 0x00080000 /* DRAM bus width 0/1 */ #define MDCNFG_SA1110_DRAC2 Fld(3, 20) /* DRAM row addr bit count */ /* bank 0/1 */ #define MDCNFG_SA1110_CDB22 0x00800000 /* Mem Clock divide by 2 0/1 */ #define MDCNFG_SA1110_TRP2 Fld(3, 24) /* RAS precharge 0/1 */ #define MDCNFG_SA1110_TDL2 Fld(2, 28) /* Data input latch after CAS*/ /* deassertion 0/1 */ #define MDCNFG_SA1110_TWR2 Fld(2, 30) /* SDRAM write recovery 0/1 */ /* * Static memory control registers * * Registers * MSC0 Memory system: Static memory Control register 0 * (read/write). * MSC1 Memory system: Static memory Control register 1 * (read/write). * * Clocks * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2). */ /* Memory system: */ #define _MSC(Nb) /* Static memory Control reg. */ \ /* [0..1] */ \ (0xA0000010 + (Nb)*4) #define _MSC0 _MSC (0) /* Static memory Control reg. 0 */ #define _MSC1 _MSC (1) /* Static memory Control reg. 1 */ #if LANGUAGE == C /* Memory system: */ #define MSC /* Static memory Control reg. */ \ /* [0..1] */ \ ((volatile Word *) io_p2v (_MSC (0))) #define MSC0 (MSC [0]) /* Static memory Control reg. 0 */ #define MSC1 (MSC [1]) /* Static memory Control reg. 1 */ #endif /* LANGUAGE == C */ #define MSC_Bnk(Nb) /* static memory Bank [0..3] */ \ Fld (16, ((Nb) Modulo 2)*16) #define MSC0_Bnk0 MSC_Bnk (0) /* static memory Bank 0 */ #define MSC0_Bnk1 MSC_Bnk (1) /* static memory Bank 1 */ #define MSC1_Bnk2 MSC_Bnk (2) /* static memory Bank 2 */ #define MSC1_Bnk3 MSC_Bnk (3) /* static memory Bank 3 */ #define MSC_RT Fld (2, 0) /* ROM/static memory Type */ #define MSC_NonBrst /* Non-Burst static memory */ \ (0 << FShft (MSC_RT)) #define MSC_SRAM /* 32-bit byte-writable SRAM */ \ (1 << FShft (MSC_RT)) #define MSC_Brst4 /* Burst-of-4 static memory */ \ (2 << FShft (MSC_RT)) #define MSC_Brst8 /* Burst-of-8 static memory */ \ (3 << FShft (MSC_RT)) #define MSC_RBW 0x0004 /* ROM/static memory Bus Width */ #define MSC_32BitStMem (MSC_RBW*0) /* 32-Bit Static Memory */ #define MSC_16BitStMem (MSC_RBW*1) /* 16-Bit Static Memory */ #define MSC_RDF Fld (5, 3) /* ROM/static memory read Delay */ /* First access - 1(.5) [Tmem] */ #define MSC_1stRdAcc(Tcpu) /* 1st Read Access time (burst */ \ /* static memory) [3..65 Tcpu] */ \ (((Tcpu) - 3)/2 << FShft (MSC_RDF)) #define MSC_Ceil1stRdAcc(Tcpu) /* Ceil. of 1stRdAcc [3..65 Tcpu] */ \ (((Tcpu) - 2)/2 << FShft (MSC_RDF)) #define MSC_RdAcc(Tcpu) /* Read Access time (non-burst */ \ /* static memory) [2..64 Tcpu] */ \ (((Tcpu) - 2)/2 << FShft (MSC_RDF)) #define MSC_CeilRdAcc(Tcpu) /* Ceil. of RdAcc [2..64 Tcpu] */ \ (((Tcpu) - 1)/2 << FShft (MSC_RDF)) #define MSC_RDN Fld (5, 8) /* ROM/static memory read Delay */ /* Next access - 1 [Tmem] */ #define MSC_NxtRdAcc(Tcpu) /* Next Read Access time (burst */ \ /* static memory) [2..64 Tcpu] */ \ (((Tcpu) - 2)/2 << FShft (MSC_RDN)) #define MSC_CeilNxtRdAcc(Tcpu) /* Ceil. of NxtRdAcc [2..64 Tcpu] */ \ (((Tcpu) - 1)/2 << FShft (MSC_RDN)) #define MSC_WrAcc(Tcpu) /* Write Access time (non-burst */ \ /* static memory) [2..64 Tcpu] */ \ (((Tcpu) - 2)/2 << FShft (MSC_RDN)) #define MSC_CeilWrAcc(Tcpu) /* Ceil. of WrAcc [2..64 Tcpu] */ \ (((Tcpu) - 1)/2 << FShft (MSC_RDN)) #define MSC_RRR Fld (3, 13) /* ROM/static memory RecoveRy */ /* time/2 [Tmem] */ #define MSC_Rec(Tcpu) /* Recovery time [0..28 Tcpu] */ \ ((Tcpu)/4 << FShft (MSC_RRR)) #define MSC_CeilRec(Tcpu) /* Ceil. of Rec [0..28 Tcpu] */ \ (((Tcpu) + 3)/4 << FShft (MSC_RRR)) /* * Personal Computer Memory Card International Association (PCMCIA) control * register * * Register * MECR Memory system: Expansion memory bus (PCMCIA) * Configuration Register (read/write). * * Clocks * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2). * fbclk, Tbclk Frequency, period of the PCMCIA clock (BCLK). */ /* Memory system: */ #define _MECR 0xA0000018 /* Expansion memory bus (PCMCIA) */ /* Configuration Reg. */ #if LANGUAGE == C /* Memory system: */ #define MECR /* Expansion memory bus (PCMCIA) */ \ /* Configuration Reg. */ \ (*((volatile Word *) io_p2v (_MECR))) #endif /* LANGUAGE == C */ #define MECR_PCMCIA(Nb) /* PCMCIA [0..1] */ \ Fld (15, (Nb)*16) #define MECR_PCMCIA0 MECR_PCMCIA (0) /* PCMCIA 0 */ #define MECR_PCMCIA1 MECR_PCMCIA (1) /* PCMCIA 1 */ #define MECR_BSIO Fld (5, 0) /* BCLK Select I/O - 1 [Tmem] */ #define MECR_IOClk(Tcpu) /* I/O Clock [2..64 Tcpu] */ \ (((Tcpu) - 2)/2 << FShft (MECR_BSIO)) #define MECR_CeilIOClk(Tcpu) /* Ceil. of IOClk [2..64 Tcpu] */ \ (((Tcpu) - 1)/2 << FShft (MECR_BSIO)) #define MECR_BSA Fld (5, 5) /* BCLK Select Attribute - 1 */ /* [Tmem] */ #define MECR_AttrClk(Tcpu) /* Attribute Clock [2..64 Tcpu] */ \ (((Tcpu) - 2)/2 << FShft (MECR_BSA)) #define MECR_CeilAttrClk(Tcpu) /* Ceil. of AttrClk [2..64 Tcpu] */ \ (((Tcpu) - 1)/2 << FShft (MECR_BSA)) #define MECR_BSM Fld (5, 10) /* BCLK Select Memory - 1 [Tmem] */ #define MECR_MemClk(Tcpu) /* Memory Clock [2..64 Tcpu] */ \ (((Tcpu) - 2)/2 << FShft (MECR_BSM)) #define MECR_CeilMemClk(Tcpu) /* Ceil. of MemClk [2..64 Tcpu] */ \ (((Tcpu) - 1)/2 << FShft (MECR_BSM)) /* * On SA1110 only */ #define _MDREFR 0xA000001C #if LANGUAGE == C /* Memory system: */ #define MDREFR \ (*((volatile Word *) io_p2v (_MDREFR))) #endif /* LANGUAGE == C */ #define MDREFR_TRASR Fld (4, 0) #define MDREFR_DRI Fld (12, 4) #define MDREFR_E0PIN (1 << 16) #define MDREFR_K0RUN (1 << 17) #define MDREFR_K0DB2 (1 << 18) #define MDREFR_E1PIN (1 << 20) #define MDREFR_K1RUN (1 << 21) #define MDREFR_K1DB2 (1 << 22) #define MDREFR_K2RUN (1 << 25) #define MDREFR_K2DB2 (1 << 26) #define MDREFR_EAPD (1 << 28) #define MDREFR_KAPD (1 << 29) #define MDREFR_SLFRSH (1 << 31) /* * Direct Memory Access (DMA) control registers * * Registers * DDAR0 Direct Memory Access (DMA) Device Address Register * channel 0 (read/write). * DCSR0 Direct Memory Access (DMA) Control and Status * Register channel 0 (read/write). * DBSA0 Direct Memory Access (DMA) Buffer Start address * register A channel 0 (read/write). * DBTA0 Direct Memory Access (DMA) Buffer Transfer count * register A channel 0 (read/write). * DBSB0 Direct Memory Access (DMA) Buffer Start address * register B channel 0 (read/write). * DBTB0 Direct Memory Access (DMA) Buffer Transfer count * register B channel 0 (read/write). * * DDAR1 Direct Memory Access (DMA) Device Address Register * channel 1 (read/write). * DCSR1 Direct Memory Access (DMA) Control and Status * Register channel 1 (read/write). * DBSA1 Direct Memory Access (DMA) Buffer Start address * register A channel 1 (read/write). * DBTA1 Direct Memory Access (DMA) Buffer Transfer count * register A channel 1 (read/write). * DBSB1 Direct Memory Access (DMA) Buffer Start address * register B channel 1 (read/write). * DBTB1 Direct Memory Access (DMA) Buffer Transfer count * register B channel 1 (read/write). * * DDAR2 Direct Memory Access (DMA) Device Address Register * channel 2 (read/write). * DCSR2 Direct Memory Access (DMA) Control and Status * Register channel 2 (read/write). * DBSA2 Direct Memory Access (DMA) Buffer Start address * register A channel 2 (read/write). * DBTA2 Direct Memory Access (DMA) Buffer Transfer count * register A channel 2 (read/write). * DBSB2 Direct Memory Access (DMA) Buffer Start address * register B channel 2 (read/write). * DBTB2 Direct Memory Access (DMA) Buffer Transfer count * register B channel 2 (read/write). * * DDAR3 Direct Memory Access (DMA) Device Address Register * channel 3 (read/write). * DCSR3 Direct Memory Access (DMA) Control and Status * Register channel 3 (read/write). * DBSA3 Direct Memory Access (DMA) Buffer Start address * register A channel 3 (read/write). * DBTA3 Direct Memory Access (DMA) Buffer Transfer count * register A channel 3 (read/write). * DBSB3 Direct Memory Access (DMA) Buffer Start address * register B channel 3 (read/write). * DBTB3 Direct Memory Access (DMA) Buffer Transfer count * register B channel 3 (read/write). * * DDAR4 Direct Memory Access (DMA) Device Address Register * channel 4 (read/write). * DCSR4 Direct Memory Access (DMA) Control and Status * Register channel 4 (read/write). * DBSA4 Direct Memory Access (DMA) Buffer Start address * register A channel 4 (read/write). * DBTA4 Direct Memory Access (DMA) Buffer Transfer count * register A channel 4 (read/write). * DBSB4 Direct Memory Access (DMA) Buffer Start address * register B channel 4 (read/write). * DBTB4 Direct Memory Access (DMA) Buffer Transfer count * register B channel 4 (read/write). * * DDAR5 Direct Memory Access (DMA) Device Address Register * channel 5 (read/write). * DCSR5 Direct Memory Access (DMA) Control and Status * Register channel 5 (read/write). * DBSA5 Direct Memory Access (DMA) Buffer Start address * register A channel 5 (read/write). * DBTA5 Direct Memory Access (DMA) Buffer Transfer count * register A channel 5 (read/write). * DBSB5 Direct Memory Access (DMA) Buffer Start address * register B channel 5 (read/write). * DBTB5 Direct Memory Access (DMA) Buffer Transfer count * register B channel 5 (read/write). */ #define DMASp 0x00000020 /* DMA control reg. Space [byte] */ #define _DDAR(Nb) /* DMA Device Address Reg. */ \ /* channel [0..5] */ \ (0xB0000000 + (Nb)*DMASp) #define _SetDCSR(Nb) /* Set DMA Control & Status Reg. */ \ /* channel [0..5] (write) */ \ (0xB0000004 + (Nb)*DMASp) #define _ClrDCSR(Nb) /* Clear DMA Control & Status Reg. */ \ /* channel [0..5] (write) */ \ (0xB0000008 + (Nb)*DMASp) #define _RdDCSR(Nb) /* Read DMA Control & Status Reg. */ \ /* channel [0..5] (read) */ \ (0xB000000C + (Nb)*DMASp) #define _DBSA(Nb) /* DMA Buffer Start address reg. A */ \ /* channel [0..5] */ \ (0xB0000010 + (Nb)*DMASp) #define _DBTA(Nb) /* DMA Buffer Transfer count */ \ /* reg. A channel [0..5] */ \ (0xB0000014 + (Nb)*DMASp) #define _DBSB(Nb) /* DMA Buffer Start address reg. B */ \ /* channel [0..5] */ \ (0xB0000018 + (Nb)*DMASp) #define _DBTB(Nb) /* DMA Buffer Transfer count */ \ /* reg. B channel [0..5] */ \ (0xB000001C + (Nb)*DMASp) #define _DDAR0 _DDAR (0) /* DMA Device Address Reg. */ /* channel 0 */ #define _SetDCSR0 _SetDCSR (0) /* Set DMA Control & Status Reg. */ /* channel 0 (write) */ #define _ClrDCSR0 _ClrDCSR (0) /* Clear DMA Control & Status Reg. */ /* channel 0 (write) */ #define _RdDCSR0 _RdDCSR (0) /* Read DMA Control & Status Reg. */ /* channel 0 (read) */ #define _DBSA0 _DBSA (0) /* DMA Buffer Start address reg. A */ /* channel 0 */ #define _DBTA0 _DBTA (0) /* DMA Buffer Transfer count */ /* reg. A channel 0 */ #define _DBSB0 _DBSB (0) /* DMA Buffer Start address reg. B */ /* channel 0 */ #define _DBTB0 _DBTB (0) /* DMA Buffer Transfer count */ /* reg. B channel 0 */ #define _DDAR1 _DDAR (1) /* DMA Device Address Reg. */ /* channel 1 */ #define _SetDCSR1 _SetDCSR (1) /* Set DMA Control & Status Reg. */ /* channel 1 (write) */ #define _ClrDCSR1 _ClrDCSR (1) /* Clear DMA Control & Status Reg. */ /* channel 1 (write) */ #define _RdDCSR1 _RdDCSR (1) /* Read DMA Control & Status Reg. */ /* channel 1 (read) */ #define _DBSA1 _DBSA (1) /* DMA Buffer Start address reg. A */ /* channel 1 */ #define _DBTA1 _DBTA (1) /* DMA Buffer Transfer count */ /* reg. A channel 1 */ #define _DBSB1 _DBSB (1) /* DMA Buffer Start address reg. B */ /* channel 1 */ #define _DBTB1 _DBTB (1) /* DMA Buffer Transfer count */ /* reg. B channel 1 */ #define _DDAR2 _DDAR (2) /* DMA Device Address Reg. */ /* channel 2 */ #define _SetDCSR2 _SetDCSR (2) /* Set DMA Control & Status Reg. */ /* channel 2 (write) */ #define _ClrDCSR2 _ClrDCSR (2) /* Clear DMA Control & Status Reg. */ /* channel 2 (write) */ #define _RdDCSR2 _RdDCSR (2) /* Read DMA Control & Status Reg. */ /* channel 2 (read) */ #define _DBSA2 _DBSA (2) /* DMA Buffer Start address reg. A */ /* channel 2 */ #define _DBTA2 _DBTA (2) /* DMA Buffer Transfer count */ /* reg. A channel 2 */ #define _DBSB2 _DBSB (2) /* DMA Buffer Start address reg. B */ /* channel 2 */ #define _DBTB2 _DBTB (2) /* DMA Buffer Transfer count */ /* reg. B channel 2 */ #define _DDAR3 _DDAR (3) /* DMA Device Address Reg. */ /* channel 3 */ #define _SetDCSR3 _SetDCSR (3) /* Set DMA Control & Status Reg. */ /* channel 3 (write) */ #define _ClrDCSR3 _ClrDCSR (3) /* Clear DMA Control & Status Reg. */ /* channel 3 (write) */ #define _RdDCSR3 _RdDCSR (3) /* Read DMA Control & Status Reg. */ /* channel 3 (read) */ #define _DBSA3 _DBSA (3) /* DMA Buffer Start address reg. A */ /* channel 3 */ #define _DBTA3 _DBTA (3) /* DMA Buffer Transfer count */ /* reg. A channel 3 */ #define _DBSB3 _DBSB (3) /* DMA Buffer Start address reg. B */ /* channel 3 */ #define _DBTB3 _DBTB (3) /* DMA Buffer Transfer count */ /* reg. B channel 3 */ #define _DDAR4 _DDAR (4) /* DMA Device Address Reg. */ /* channel 4 */ #define _SetDCSR4 _SetDCSR (4) /* Set DMA Control & Status Reg. */ /* channel 4 (write) */ #define _ClrDCSR4 _ClrDCSR (4) /* Clear DMA Control & Status Reg. */ /* channel 4 (write) */ #define _RdDCSR4 _RdDCSR (4) /* Read DMA Control & Status Reg. */ /* channel 4 (read) */ #define _DBSA4 _DBSA (4) /* DMA Buffer Start address reg. A */ /* channel 4 */ #define _DBTA4 _DBTA (4) /* DMA Buffer Transfer count */ /* reg. A channel 4 */ #define _DBSB4 _DBSB (4) /* DMA Buffer Start address reg. B */ /* channel 4 */ #define _DBTB4 _DBTB (4) /* DMA Buffer Transfer count */ /* reg. B channel 4 */ #define _DDAR5 _DDAR (5) /* DMA Device Address Reg. */ /* channel 5 */ #define _SetDCSR5 _SetDCSR (5) /* Set DMA Control & Status Reg. */ /* channel 5 (write) */ #define _ClrDCSR5 _ClrDCSR (5) /* Clear DMA Control & Status Reg. */ /* channel 5 (write) */ #define _RdDCSR5 _RdDCSR (5) /* Read DMA Control & Status Reg. */ /* channel 5 (read) */ #define _DBSA5 _DBSA (5) /* DMA Buffer Start address reg. A */ /* channel 5 */ #define _DBTA5 _DBTA (5) /* DMA Buffer Transfer count */ /* reg. A channel 5 */ #define _DBSB5 _DBSB (5) /* DMA Buffer Start address reg. B */ /* channel 5 */ #define _DBTB5 _DBTB (5) /* DMA Buffer Transfer count */ /* reg. B channel 5 */ #if LANGUAGE == C #define DDAR0 /* DMA Device Address Reg. */ \ /* channel 0 */ \ (*((volatile Word *) io_p2v (_DDAR0))) #define SetDCSR0 /* Set DMA Control & Status Reg. */ \ /* channel 0 (write) */ \ (*((volatile Word *) io_p2v (_SetDCSR0))) #define ClrDCSR0 /* Clear DMA Control & Status Reg. */ \ /* channel 0 (write) */ \ (*((volatile Word *) io_p2v (_ClrDCSR0))) #define RdDCSR0 /* Read DMA Control & Status Reg. */ \ /* channel 0 (read) */ \ (*((volatile Word *) io_p2v (_RdDCSR0))) #define DBSA0 /* DMA Buffer Start address reg. A */ \ /* channel 0 */ \ (*((volatile Address *) io_p2v (_DBSA0))) #define DBTA0 /* DMA Buffer Transfer count */ \ /* reg. A channel 0 */ \ (*((volatile Word *) io_p2v (_DBTA0))) #define DBSB0 /* DMA Buffer Start address reg. B */ \ /* channel 0 */ \ (*((volatile Address *) io_p2v (_DBSB0))) #define DBTB0 /* DMA Buffer Transfer count */ \ /* reg. B channel 0 */ \ (*((volatile Word *) io_p2v (_DBTB0))) #define DDAR1 /* DMA Device Address Reg. */ \ /* channel 1 */ \ (*((volatile Word *) io_p2v (_DDAR1))) #define SetDCSR1 /* Set DMA Control & Status Reg. */ \ /* channel 1 (write) */ \ (*((volatile Word *) io_p2v (_SetDCSR1))) #define ClrDCSR1 /* Clear DMA Control & Status Reg. */ \ /* channel 1 (write) */ \ (*((volatile Word *) io_p2v (_ClrDCSR1))) #define RdDCSR1 /* Read DMA Control & Status Reg. */ \ /* channel 1 (read) */ \ (*((volatile Word *) io_p2v (_RdDCSR1))) #define DBSA1 /* DMA Buffer Start address reg. A */ \ /* channel 1 */ \ (*((volatile Address *) io_p2v (_DBSA1))) #define DBTA1 /* DMA Buffer Transfer count */ \ /* reg. A channel 1 */ \ (*((volatile Word *) io_p2v (_DBTA1))) #define DBSB1 /* DMA Buffer Start address reg. B */ \ /* channel 1 */ \ (*((volatile Address *) io_p2v (_DBSB1))) #define DBTB1 /* DMA Buffer Transfer count */ \ /* reg. B channel 1 */ \ (*((volatile Word *) io_p2v (_DBTB1))) #define DDAR2 /* DMA Device Address Reg. */ \ /* channel 2 */ \ (*((volatile Word *) io_p2v (_DDAR2))) #define SetDCSR2 /* Set DMA Control & Status Reg. */ \ /* channel 2 (write) */ \ (*((volatile Word *) io_p2v (_SetDCSR2))) #define ClrDCSR2 /* Clear DMA Control & Status Reg. */ \ /* channel 2 (write) */ \ (*((volatile Word *) io_p2v (_ClrDCSR2))) #define RdDCSR2 /* Read DMA Control & Status Reg. */ \ /* channel 2 (read) */ \ (*((volatile Word *) io_p2v (_RdDCSR2))) #define DBSA2 /* DMA Buffer Start address reg. A */ \ /* channel 2 */ \ (*((volatile Address *) io_p2v (_DBSA2))) #define DBTA2 /* DMA Buffer Transfer count */ \ /* reg. A channel 2 */ \ (*((volatile Word *) io_p2v (_DBTA2))) #define DBSB2 /* DMA Buffer Start address reg. B */ \ /* channel 2 */ \ (*((volatile Address *) io_p2v (_DBSB2))) #define DBTB2 /* DMA Buffer Transfer count */ \ /* reg. B channel 2 */ \ (*((volatile Word *) io_p2v (_DBTB2))) #define DDAR3 /* DMA Device Address Reg. */ \ /* channel 3 */ \ (*((volatile Word *) io_p2v (_DDAR3))) #define SetDCSR3 /* Set DMA Control & Status Reg. */ \ /* channel 3 (write) */ \ (*((volatile Word *) io_p2v (_SetDCSR3))) #define ClrDCSR3 /* Clear DMA Control & Status Reg. */ \ /* channel 3 (write) */ \ (*((volatile Word *) io_p2v (_ClrDCSR3))) #define RdDCSR3 /* Read DMA Control & Status Reg. */ \ /* channel 3 (read) */ \ (*((volatile Word *) io_p2v (_RdDCSR3))) #define DBSA3 /* DMA Buffer Start address reg. A */ \ /* channel 3 */ \ (*((volatile Address *) io_p2v (_DBSA3))) #define DBTA3 /* DMA Buffer Transfer count */ \ /* reg. A channel 3 */ \ (*((volatile Word *) io_p2v (_DBTA3))) #define DBSB3 /* DMA Buffer Start address reg. B */ \ /* channel 3 */ \ (*((volatile Address *) io_p2v (_DBSB3))) #define DBTB3 /* DMA Buffer Transfer count */ \ /* reg. B channel 3 */ \ (*((volatile Word *) io_p2v (_DBTB3))) #define DDAR4 /* DMA Device Address Reg. */ \ /* channel 4 */ \ (*((volatile Word *) io_p2v (_DDAR4))) #define SetDCSR4 /* Set DMA Control & Status Reg. */ \ /* channel 4 (write) */ \ (*((volatile Word *) io_p2v (_SetDCSR4))) #define ClrDCSR4 /* Clear DMA Control & Status Reg. */ \ /* channel 4 (write) */ \ (*((volatile Word *) io_p2v (_ClrDCSR4))) #define RdDCSR4 /* Read DMA Control & Status Reg. */ \ /* channel 4 (read) */ \ (*((volatile Word *) io_p2v (_RdDCSR4))) #define DBSA4 /* DMA Buffer Start address reg. A */ \ /* channel 4 */ \ (*((volatile Address *) io_p2v (_DBSA4))) #define DBTA4 /* DMA Buffer Transfer count */ \ /* reg. A channel 4 */ \ (*((volatile Word *) io_p2v (_DBTA4))) #define DBSB4 /* DMA Buffer Start address reg. B */ \ /* channel 4 */ \ (*((volatile Address *) io_p2v (_DBSB4))) #define DBTB4 /* DMA Buffer Transfer count */ \ /* reg. B channel 4 */ \ (*((volatile Word *) io_p2v (_DBTB4))) #define DDAR5 /* DMA Device Address Reg. */ \ /* channel 5 */ \ (*((volatile Word *) io_p2v (_DDAR5))) #define SetDCSR5 /* Set DMA Control & Status Reg. */ \ /* channel 5 (write) */ \ (*((volatile Word *) io_p2v (_SetDCSR5))) #define ClrDCSR5 /* Clear DMA Control & Status Reg. */ \ /* channel 5 (write) */ \ (*((volatile Word *) io_p2v (_ClrDCSR5))) #define RdDCSR5 /* Read DMA Control & Status Reg. */ \ /* channel 5 (read) */ \ (*((volatile Word *) io_p2v (_RdDCSR5))) #define DBSA5 /* DMA Buffer Start address reg. A */ \ /* channel 5 */ \ (*((volatile Address *) io_p2v (_DBSA5))) #define DBTA5 /* DMA Buffer Transfer count */ \ /* reg. A channel 5 */ \ (*((volatile Word *) io_p2v (_DBTA5))) #define DBSB5 /* DMA Buffer Start address reg. B */ \ /* channel 5 */ \ (*((volatile Address *) io_p2v (_DBSB5))) #define DBTB5 /* DMA Buffer Transfer count */ \ /* reg. B channel 5 */ \ (*((volatile Word *) io_p2v (_DBTB5))) #endif /* LANGUAGE == C */ #define DDAR_RW 0x00000001 /* device data Read/Write */ #define DDAR_DevWr (DDAR_RW*0) /* Device data Write */ /* (memory -> device) */ #define DDAR_DevRd (DDAR_RW*1) /* Device data Read */ /* (device -> memory) */ #define DDAR_E 0x00000002 /* big/little Endian device */ #define DDAR_LtlEnd (DDAR_E*0) /* Little Endian device */ #define DDAR_BigEnd (DDAR_E*1) /* Big Endian device */ #define DDAR_BS 0x00000004 /* device Burst Size */ #define DDAR_Brst4 (DDAR_BS*0) /* Burst-of-4 device */ #define DDAR_Brst8 (DDAR_BS*1) /* Burst-of-8 device */ #define DDAR_DW 0x00000008 /* device Data Width */ #define DDAR_8BitDev (DDAR_DW*0) /* 8-Bit Device */ #define DDAR_16BitDev (DDAR_DW*1) /* 16-Bit Device */ #define DDAR_DS Fld (4, 4) /* Device Select */ #define DDAR_Ser0UDCTr /* Ser. port 0 UDC Transmit */ \ (0x0 << FShft (DDAR_DS)) #define DDAR_Ser0UDCRc /* Ser. port 0 UDC Receive */ \ (0x1 << FShft (DDAR_DS)) #define DDAR_Ser1SDLCTr /* Ser. port 1 SDLC Transmit */ \ (0x2 << FShft (DDAR_DS)) #define DDAR_Ser1SDLCRc /* Ser. port 1 SDLC Receive */ \ (0x3 << FShft (DDAR_DS)) #define DDAR_Ser1UARTTr /* Ser. port 1 UART Transmit */ \ (0x4 << FShft (DDAR_DS)) #define DDAR_Ser1UARTRc /* Ser. port 1 UART Receive */ \ (0x5 << FShft (DDAR_DS)) #define DDAR_Ser2ICPTr /* Ser. port 2 ICP Transmit */ \ (0x6 << FShft (DDAR_DS)) #define DDAR_Ser2ICPRc /* Ser. port 2 ICP Receive */ \ (0x7 << FShft (DDAR_DS)) #define DDAR_Ser3UARTTr /* Ser. port 3 UART Transmit */ \ (0x8 << FShft (DDAR_DS)) #define DDAR_Ser3UARTRc /* Ser. port 3 UART Receive */ \ (0x9 << FShft (DDAR_DS)) #define DDAR_Ser4MCP0Tr /* Ser. port 4 MCP 0 Transmit */ \ /* (audio) */ \ (0xA << FShft (DDAR_DS)) #define DDAR_Ser4MCP0Rc /* Ser. port 4 MCP 0 Receive */ \ /* (audio) */ \ (0xB << FShft (DDAR_DS)) #define DDAR_Ser4MCP1Tr /* Ser. port 4 MCP 1 Transmit */ \ /* (telecom) */ \ (0xC << FShft (DDAR_DS)) #define DDAR_Ser4MCP1Rc /* Ser. port 4 MCP 1 Receive */ \ /* (telecom) */ \ (0xD << FShft (DDAR_DS)) #define DDAR_Ser4SSPTr /* Ser. port 4 SSP Transmit */ \ (0xE << FShft (DDAR_DS)) #define DDAR_Ser4SSPRc /* Ser. port 4 SSP Receive */ \ (0xF << FShft (DDAR_DS)) #define DDAR_DA Fld (24, 8) /* Device Address */ #define DDAR_DevAdd(Add) /* Device Address */ \ (((Add) & 0xF0000000) | \ (((Add) & 0X003FFFFC) << (FShft (DDAR_DA) - 2))) #define DDAR_Ser0UDCWr /* Ser. port 0 UDC Write */ \ (DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \ DDAR_Ser0UDCTr + DDAR_DevAdd (_Ser0UDCDR)) #define DDAR_Ser0UDCRd /* Ser. port 0 UDC Read */ \ (DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \ DDAR_Ser0UDCRc + DDAR_DevAdd (_Ser0UDCDR)) #define DDAR_Ser1UARTWr /* Ser. port 1 UART Write */ \ (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \ DDAR_Ser1UARTTr + DDAR_DevAdd (_Ser1UTDR)) #define DDAR_Ser1UARTRd /* Ser. port 1 UART Read */ \ (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \ DDAR_Ser1UARTRc + DDAR_DevAdd (_Ser1UTDR)) #define DDAR_Ser1SDLCWr /* Ser. port 1 SDLC Write */ \ (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \ DDAR_Ser1SDLCTr + DDAR_DevAdd (_Ser1SDDR)) #define DDAR_Ser1SDLCRd /* Ser. port 1 SDLC Read */ \ (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \ DDAR_Ser1SDLCRc + DDAR_DevAdd (_Ser1SDDR)) #define DDAR_Ser2UARTWr /* Ser. port 2 UART Write */ \ (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \ DDAR_Ser2ICPTr + DDAR_DevAdd (_Ser2UTDR)) #define DDAR_Ser2UARTRd /* Ser. port 2 UART Read */ \ (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \ DDAR_Ser2ICPRc + DDAR_DevAdd (_Ser2UTDR)) #define DDAR_Ser2HSSPWr /* Ser. port 2 HSSP Write */ \ (DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \ DDAR_Ser2ICPTr + DDAR_DevAdd (_Ser2HSDR)) #define DDAR_Ser2HSSPRd /* Ser. port 2 HSSP Read */ \ (DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \ DDAR_Ser2ICPRc + DDAR_DevAdd (_Ser2HSDR)) #define DDAR_Ser3UARTWr /* Ser. port 3 UART Write */ \ (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \ DDAR_Ser3UARTTr + DDAR_DevAdd (_Ser3UTDR)) #define DDAR_Ser3UARTRd /* Ser. port 3 UART Read */ \ (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \ DDAR_Ser3UARTRc + DDAR_DevAdd (_Ser3UTDR)) #define DDAR_Ser4MCP0Wr /* Ser. port 4 MCP 0 Write (audio) */ \ (DDAR_DevWr + DDAR_Brst8 + DDAR_16BitDev + \ DDAR_Ser4MCP0Tr + DDAR_DevAdd (_Ser4MCDR0)) #define DDAR_Ser4MCP0Rd /* Ser. port 4 MCP 0 Read (audio) */ \ (DDAR_DevRd + DDAR_Brst8 + DDAR_16BitDev + \ DDAR_Ser4MCP0Rc + DDAR_DevAdd (_Ser4MCDR0)) #define DDAR_Ser4MCP1Wr /* Ser. port 4 MCP 1 Write */ \ /* (telecom) */ \ (DDAR_DevWr + DDAR_Brst8 + DDAR_16BitDev + \ DDAR_Ser4MCP1Tr + DDAR_DevAdd (_Ser4MCDR1)) #define DDAR_Ser4MCP1Rd /* Ser. port 4 MCP 1 Read */ \ /* (telecom) */ \ (DDAR_DevRd + DDAR_Brst8 + DDAR_16BitDev + \ DDAR_Ser4MCP1Rc + DDAR_DevAdd (_Ser4MCDR1)) #define DDAR_Ser4SSPWr /* Ser. port 4 SSP Write (16 bits) */ \ (DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \ DDAR_Ser4SSPTr + DDAR_DevAdd (_Ser4SSDR)) #define DDAR_Ser4SSPRd /* Ser. port 4 SSP Read (16 bits) */ \ (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \ DDAR_Ser4SSPRc + DDAR_DevAdd (_Ser4SSDR)) #define DCSR_RUN 0x00000001 /* DMA RUNing */ #define DCSR_IE 0x00000002 /* DMA Interrupt Enable */ #define DCSR_ERROR 0x00000004 /* DMA ERROR */ #define DCSR_DONEA 0x00000008 /* DONE DMA transfer buffer A */ #define DCSR_STRTA 0x00000010 /* STaRTed DMA transfer buffer A */ #define DCSR_DONEB 0x00000020 /* DONE DMA transfer buffer B */ #define DCSR_STRTB 0x00000040 /* STaRTed DMA transfer buffer B */ #define DCSR_BIU 0x00000080 /* DMA Buffer In Use */ #define DCSR_BufA (DCSR_BIU*0) /* DMA Buffer A in use */ #define DCSR_BufB (DCSR_BIU*1) /* DMA Buffer B in use */ #define DBT_TC Fld (13, 0) /* Transfer Count */ #define DBTA_TCA DBT_TC /* Transfer Count buffer A */ #define DBTB_TCB DBT_TC /* Transfer Count buffer B */ /* * Liquid Crystal Display (LCD) control registers * * Registers * LCCR0 Liquid Crystal Display (LCD) Control Register 0 * (read/write). * [Bits LDM, BAM, and ERM are only implemented in * versions 2.0 (rev. = 8) and higher of the StrongARM * SA-1100.] * LCSR Liquid Crystal Display (LCD) Status Register * (read/write). * [Bit LDD can be only read in versions 1.0 (rev. = 1) * and 1.1 (rev. = 2) of the StrongARM SA-1100, it can be * read and written (cleared) in versions 2.0 (rev. = 8) * and higher.] * DBAR1 Liquid Crystal Display (LCD) Direct Memory Access * (DMA) Base Address Register channel 1 (read/write). * DCAR1 Liquid Crystal Display (LCD) Direct Memory Access * (DMA) Current Address Register channel 1 (read). * DBAR2 Liquid Crystal Display (LCD) Direct Memory Access * (DMA) Base Address Register channel 2 (read/write). * DCAR2 Liquid Crystal Display (LCD) Direct Memory Access * (DMA) Current Address Register channel 2 (read). * LCCR1 Liquid Crystal Display (LCD) Control Register 1 * (read/write). * [The LCCR1 register can be only written in * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the * StrongARM SA-1100, it can be written and read in * versions 2.0 (rev. = 8) and higher.] * LCCR2 Liquid Crystal Display (LCD) Control Register 2 * (read/write). * [The LCCR1 register can be only written in * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the * StrongARM SA-1100, it can be written and read in * versions 2.0 (rev. = 8) and higher.] * LCCR3 Liquid Crystal Display (LCD) Control Register 3 * (read/write). * [The LCCR1 register can be only written in * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the * StrongARM SA-1100, it can be written and read in * versions 2.0 (rev. = 8) and higher. Bit PCP is only * implemented in versions 2.0 (rev. = 8) and higher of * the StrongARM SA-1100.] * * Clocks * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2). * fpix, Tpix Frequency, period of the pixel clock. * fln, Tln Frequency, period of the line clock. * fac, Tac Frequency, period of the AC bias clock. */ #define LCD_PEntrySp 2 /* LCD Palette Entry Space [byte] */ #define LCD_4BitPSp /* LCD 4-Bit pixel Palette Space */ \ /* [byte] */ \ (16*LCD_PEntrySp) #define LCD_8BitPSp /* LCD 8-Bit pixel Palette Space */ \ /* [byte] */ \ (256*LCD_PEntrySp) #define LCD_12_16BitPSp /* LCD 12/16-Bit pixel */ \ /* dummy-Palette Space [byte] */ \ (16*LCD_PEntrySp) #define LCD_PGrey Fld (4, 0) /* LCD Palette entry Grey value */ #define LCD_PBlue Fld (4, 0) /* LCD Palette entry Blue value */ #define LCD_PGreen Fld (4, 4) /* LCD Palette entry Green value */ #define LCD_PRed Fld (4, 8) /* LCD Palette entry Red value */ #define LCD_PBS Fld (2, 12) /* LCD Pixel Bit Size */ #define LCD_4Bit /* LCD 4-Bit pixel mode */ \ (0 << FShft (LCD_PBS)) #define LCD_8Bit /* LCD 8-Bit pixel mode */ \ (1 << FShft (LCD_PBS)) #define LCD_12_16Bit /* LCD 12/16-Bit pixel mode */ \ (2 << FShft (LCD_PBS)) #define LCD_Int0_0 0x0 /* LCD Intensity = 0.0% = 0 */ #define LCD_Int11_1 0x1 /* LCD Intensity = 11.1% = 1/9 */ #define LCD_Int20_0 0x2 /* LCD Intensity = 20.0% = 1/5 */ #define LCD_Int26_7 0x3 /* LCD Intensity = 26.7% = 4/15 */ #define LCD_Int33_3 0x4 /* LCD Intensity = 33.3% = 3/9 */ #define LCD_Int40_0 0x5 /* LCD Intensity = 40.0% = 2/5 */ #define LCD_Int44_4 0x6 /* LCD Intensity = 44.4% = 4/9 */ #define LCD_Int50_0 0x7 /* LCD Intensity = 50.0% = 1/2 */ #define LCD_Int55_6 0x8 /* LCD Intensity = 55.6% = 5/9 */ #define LCD_Int60_0 0x9 /* LCD Intensity = 60.0% = 3/5 */ #define LCD_Int66_7 0xA /* LCD Intensity = 66.7% = 6/9 */ #define LCD_Int73_3 0xB /* LCD Intensity = 73.3% = 11/15 */ #define LCD_Int80_0 0xC /* LCD Intensity = 80.0% = 4/5 */ #define LCD_Int88_9 0xD /* LCD Intensity = 88.9% = 8/9 */ #define LCD_Int100_0 0xE /* LCD Intensity = 100.0% = 1 */ #define LCD_Int100_0A 0xF /* LCD Intensity = 100.0% = 1 */ /* (Alternative) */ #define _LCCR0 0xB0100000 /* LCD Control Reg. 0 */ #define _LCSR 0xB0100004 /* LCD Status Reg. */ #define _DBAR1 0xB0100010 /* LCD DMA Base Address Reg. */ /* channel 1 */ #define _DCAR1 0xB0100014 /* LCD DMA Current Address Reg. */ /* channel 1 */ #define _DBAR2 0xB0100018 /* LCD DMA Base Address Reg. */ /* channel 2 */ #define _DCAR2 0xB010001C /* LCD DMA Current Address Reg. */ /* channel 2 */ #define _LCCR1 0xB0100020 /* LCD Control Reg. 1 */ #define _LCCR2 0xB0100024 /* LCD Control Reg. 2 */ #define _LCCR3 0xB0100028 /* LCD Control Reg. 3 */ #if LANGUAGE == C #define LCCR0 /* LCD Control Reg. 0 */ \ (*((volatile Word *) io_p2v (_LCCR0))) #define LCSR /* LCD Status Reg. */ \ (*((volatile Word *) io_p2v (_LCSR))) #define DBAR1 /* LCD DMA Base Address Reg. */ \ /* channel 1 */ \ (*((volatile Address *) io_p2v (_DBAR1))) #define DCAR1 /* LCD DMA Current Address Reg. */ \ /* channel 1 */ \ (*((volatile Address *) io_p2v (_DCAR1))) #define DBAR2 /* LCD DMA Base Address Reg. */ \ /* channel 2 */ \ (*((volatile Address *) io_p2v (_DBAR2))) #define DCAR2 /* LCD DMA Current Address Reg. */ \ /* channel 2 */ \ (*((volatile Address *) io_p2v (_DCAR2))) #define LCCR1 /* LCD Control Reg. 1 */ \ (*((volatile Word *) io_p2v (_LCCR1))) #define LCCR2 /* LCD Control Reg. 2 */ \ (*((volatile Word *) io_p2v (_LCCR2))) #define LCCR3 /* LCD Control Reg. 3 */ \ (*((volatile Word *) io_p2v (_LCCR3))) #endif /* LANGUAGE == C */ #define LCCR0_LEN 0x00000001 /* LCD ENable */ #define LCCR0_CMS 0x00000002 /* Color/Monochrome display Select */ #define LCCR0_Color (LCCR0_CMS*0) /* Color display */ #define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */ #define LCCR0_SDS 0x00000004 /* Single/Dual panel display */ /* Select */ #define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */ #define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */ #define LCCR0_LDM 0x00000008 /* LCD Disable done (LDD) */ /* interrupt Mask (disable) */ #define LCCR0_BAM 0x00000010 /* Base Address update (BAU) */ /* interrupt Mask (disable) */ #define LCCR0_ERM 0x00000020 /* LCD ERror (BER, IOL, IUL, IOU, */ /* IUU, OOL, OUL, OOU, and OUU) */ /* interrupt Mask (disable) */ #define LCCR0_PAS 0x00000080 /* Passive/Active display Select */ #define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */ #define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */ #define LCCR0_BLE 0x00000100 /* Big/Little Endian select */ #define LCCR0_LtlEnd (LCCR0_BLE*0) /* Little Endian frame buffer */ #define LCCR0_BigEnd (LCCR0_BLE*1) /* Big Endian frame buffer */ #define LCCR0_DPD 0x00000200 /* Double Pixel Data (monochrome */ /* display mode) */ #define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome */ /* display */ #define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome */ /* display */ #define LCCR0_PDD Fld (8, 12) /* Palette DMA request Delay */ /* [Tmem] */ #define LCCR0_DMADel(Tcpu) /* palette DMA request Delay */ \ /* [0..510 Tcpu] */ \ ((Tcpu)/2 << FShft (LCCR0_PDD)) #define LCSR_LDD 0x00000001 /* LCD Disable Done */ #define LCSR_BAU 0x00000002 /* Base Address Update (read) */ #define LCSR_BER 0x00000004 /* Bus ERror */ #define LCSR_ABC 0x00000008 /* AC Bias clock Count */ #define LCSR_IOL 0x00000010 /* Input FIFO Over-run Lower */ /* panel */ #define LCSR_IUL 0x00000020 /* Input FIFO Under-run Lower */ /* panel */ #define LCSR_IOU 0x00000040 /* Input FIFO Over-run Upper */ /* panel */ #define LCSR_IUU 0x00000080 /* Input FIFO Under-run Upper */ /* panel */ #define LCSR_OOL 0x00000100 /* Output FIFO Over-run Lower */ /* panel */ #define LCSR_OUL 0x00000200 /* Output FIFO Under-run Lower */ /* panel */ #define LCSR_OOU 0x00000400 /* Output FIFO Over-run Upper */ /* panel */ #define LCSR_OUU 0x00000800 /* Output FIFO Under-run Upper */ /* panel */ #define LCCR1_PPL Fld (6, 4) /* Pixels Per Line/16 - 1 */ #define LCCR1_DisWdth(Pixel) /* Display Width [16..1024 pix.] */ \ (((Pixel) - 16)/16 << FShft (LCCR1_PPL)) #define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */ /* pulse Width - 2 [Tpix] (L_LCLK) */ #define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \ /* pulse Width [2..65 Tpix] */ \ (((Tpix) - 2) << FShft (LCCR1_HSW)) #define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */ /* count - 1 [Tpix] */ #define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \ /* [1..256 Tpix] */ \ (((Tpix) - 1) << FShft (LCCR1_ELW)) #define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */ /* Wait count - 1 [Tpix] */ #define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \ /* [1..256 Tpix] */ \ (((Tpix) - 1) << FShft (LCCR1_BLW)) #define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */ #define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \ (((Line) - 1) << FShft (LCCR2_LPP)) #define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */ /* Width - 1 [Tln] (L_FCLK) */ #define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \ /* Width [1..64 Tln] */ \ (((Tln) - 1) << FShft (LCCR2_VSW)) #define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */ /* count [Tln] */ #define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \ /* [0..255 Tln] */ \ ((Tln) << FShft (LCCR2_EFW)) #define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */ /* Wait count [Tln] */ #define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \ /* [0..255 Tln] */ \ ((Tln) << FShft (LCCR2_BFW)) #define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor/2 - 2 */ /* [1..255] (L_PCLK) */ /* fpix = fcpu/(2*(PCD + 2)) */ /* Tpix = 2*(PCD + 2)*Tcpu */ #define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor [6..514] */ \ (((Div) - 4)/2 << FShft (LCCR3_PCD)) /* fpix = fcpu/(2*Floor (Div/2)) */ /* Tpix = 2*Floor (Div/2)*Tcpu */ #define LCCR3_CeilPixClkDiv(Div) /* Ceil. of PixClkDiv [6..514] */ \ (((Div) - 3)/2 << FShft (LCCR3_PCD)) /* fpix = fcpu/(2*Ceil (Div/2)) */ /* Tpix = 2*Ceil (Div/2)*Tcpu */ #define LCCR3_ACB Fld (8, 8) /* AC Bias clock half period - 1 */ /* [Tln] (L_BIAS) */ #define LCCR3_ACBsDiv(Div) /* AC Bias clock Divisor [2..512] */ \ (((Div) - 2)/2 << FShft (LCCR3_ACB)) /* fac = fln/(2*Floor (Div/2)) */ /* Tac = 2*Floor (Div/2)*Tln */ #define LCCR3_CeilACBsDiv(Div) /* Ceil. of ACBsDiv [2..512] */ \ (((Div) - 1)/2 << FShft (LCCR3_ACB)) /* fac = fln/(2*Ceil (Div/2)) */ /* Tac = 2*Ceil (Div/2)*Tln */ #define LCCR3_API Fld (4, 16) /* AC bias Pin transitions per */ /* Interrupt */ #define LCCR3_ACBsCntOff /* AC Bias clock transition Count */ \ /* Off */ \ (0 << FShft (LCCR3_API)) #define LCCR3_ACBsCnt(Trans) /* AC Bias clock transition Count */ \ /* [1..15] */ \ ((Trans) << FShft (LCCR3_API)) #define LCCR3_VSP 0x00100000 /* Vertical Synchronization pulse */ /* Polarity (L_FCLK) */ #define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */ /* active High */ #define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */ /* active Low */ #define LCCR3_HSP 0x00200000 /* Horizontal Synchronization */ /* pulse Polarity (L_LCLK) */ #define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */ /* pulse active High */ #define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */ /* pulse active Low */ #define LCCR3_PCP 0x00400000 /* Pixel Clock Polarity (L_PCLK) */ #define LCCR3_PixFlEdg (LCCR3_PCP*0) /* Pixel clock Falling-Edge */ #define LCCR3_PixRsEdg (LCCR3_PCP*1) /* Pixel clock Rising-Edge */ #define LCCR3_OEP 0x00800000 /* Output Enable Polarity (L_BIAS, */ /* active display mode) */ #define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */ #define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */ #undef C #undef Assembly |