#
# For a description of the syntax of this configuration file,
# see the Configure script.
#
mainmenu_name "Linux Kernel Configuration"

mainmenu_option next_comment
comment 'Code maturity level options'
bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
endmenu

mainmenu_option next_comment
comment 'Processor type and features'
choice 'Processor family' \
	"386			CONFIG_M386	\
	 486/Cx486		CONFIG_M486	\
	 586/K5/5x86/6x86	CONFIG_M586	\
	 Pentium/K6/TSC		CONFIG_M586TSC	\
	 PPro/6x86MX		CONFIG_M686" PPro
#
# Define implied options from the CPU selection here
#
if [ "$CONFIG_M386" != "y" ]; then
  define_bool CONFIG_X86_WP_WORKS_OK y
  define_bool CONFIG_X86_INVLPG y
  define_bool CONFIG_X86_BSWAP y
  define_bool CONFIG_X86_POPAD_OK y
fi
if [ "$CONFIG_M686" = "y" -o "$CONFIG_M586TSC" = "y" ]; then
  define_bool CONFIG_X86_TSC y
fi
if [ "$CONFIG_M686" = "y" ]; then
  define_bool CONFIG_X86_GOOD_APIC y
fi

choice 'Maximum Physical Memory' \
	"1GB		CONFIG_1GB \
	 2GB		CONFIG_2GB" 1GB

bool 'Math emulation' CONFIG_MATH_EMULATION
bool 'MTRR (Memory Type Range Register) support' CONFIG_MTRR
bool 'Symmetric multi-processing support' CONFIG_SMP
endmenu

mainmenu_option next_comment
comment 'Loadable module support'
bool 'Enable loadable module support' CONFIG_MODULES
if [ "$CONFIG_MODULES" = "y" ]; then
  bool 'Set version information on all symbols for modules' CONFIG_MODVERSIONS
  bool 'Kernel module loader' CONFIG_KMOD
fi
endmenu

mainmenu_option next_comment
comment 'General setup'

bool 'Networking support' CONFIG_NET
bool 'PCI support' CONFIG_PCI
if [ "$CONFIG_PCI" = "y" ]; then
  choice 'PCI access mode' \
	"BIOS		CONFIG_PCI_GOBIOS	\
	 Direct		CONFIG_PCI_GODIRECT	\
	 Any		CONFIG_PCI_GOANY"	Any
  if [ "$CONFIG_PCI_GOBIOS" = "y" -o "$CONFIG_PCI_GOANY" = "y" ]; then
    define_bool CONFIG_PCI_BIOS y
  fi
  if [ "$CONFIG_PCI_GODIRECT" = "y" -o "$CONFIG_PCI_GOANY" = "y" ]; then
    define_bool CONFIG_PCI_DIRECT y
  fi
  bool '   PCI quirks' CONFIG_PCI_QUIRKS
  if [ "$CONFIG_PCI_QUIRKS" = "y" -a "$CONFIG_EXPERIMENTAL" = "y" ]; then
    bool '   PCI bridge optimization (experimental)' CONFIG_PCI_OPTIMIZE
  fi
  bool '   Backward-compatible /proc/pci' CONFIG_PCI_OLD_PROC
fi
bool 'MCA support' CONFIG_MCA
bool 'SGI Visual Workstation support' CONFIG_VISWS
if [ "$CONFIG_VISWS" = "y" ]; then
  define_bool CONFIG_X86_VISWS_APIC y
  define_bool CONFIG_X86_LOCAL_APIC y
else
  if [ "$CONFIG_SMP" = "y" ]; then
    define_bool CONFIG_X86_IO_APIC y
    define_bool CONFIG_X86_LOCAL_APIC y
  fi
fi

bool 'System V IPC' CONFIG_SYSVIPC
bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
bool 'Sysctl support' CONFIG_SYSCTL
tristate 'Kernel support for a.out binaries' CONFIG_BINFMT_AOUT
tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
  tristate 'Kernel support for JAVA binaries (obsolete)' CONFIG_BINFMT_JAVA
fi

tristate 'Parallel port support' CONFIG_PARPORT
if [ "$CONFIG_PARPORT" != "n" ]; then
  dep_tristate '   PC-style hardware' CONFIG_PARPORT_PC $CONFIG_PARPORT
  if [ "$CONFIG_PARPORT_PC" != "n" ]; then
    bool '   Support foreign hardware' CONFIG_PARPORT_OTHER
  fi
fi

bool 'Advanced Power Management BIOS support' CONFIG_APM
if [ "$CONFIG_APM" = "y" ]; then
  bool '   Ignore USER SUSPEND' CONFIG_APM_IGNORE_USER_SUSPEND
  bool '   Enable PM at boot time' CONFIG_APM_DO_ENABLE
  bool '   Make CPU Idle calls when idle' CONFIG_APM_CPU_IDLE
  bool '   Enable console blanking using APM' CONFIG_APM_DISPLAY_BLANK
  bool '   Power off on shutdown' CONFIG_APM_POWER_OFF
  bool '   Ignore multiple suspend' CONFIG_APM_IGNORE_MULTIPLE_SUSPEND
  bool '   Ignore multiple suspend/resume cycles' CONFIG_APM_IGNORE_SUSPEND_BOUNCE
  bool '   RTC stores time in GMT' CONFIG_APM_RTC_IS_GMT
  bool '   Allow interrupts during APM BIOS calls' CONFIG_APM_ALLOW_INTS
fi

endmenu

source drivers/i2o/Config.in

source drivers/pnp/Config.in

source drivers/block/Config.in

if [ "$CONFIG_NET" = "y" ]; then
  source net/Config.in
fi

mainmenu_option next_comment
comment 'SCSI support'

tristate 'SCSI support' CONFIG_SCSI

if [ "$CONFIG_SCSI" != "n" ]; then
  source drivers/scsi/Config.in
fi
endmenu

if [ "$CONFIG_NET" = "y" ]; then
  mainmenu_option next_comment
  comment 'Network device support'

  bool 'Network device support' CONFIG_NETDEVICES
  if [ "$CONFIG_NETDEVICES" = "y" ]; then
    source drivers/net/Config.in
  fi
  endmenu
fi

source net/ax25/Config.in

source net/irda/Config.in

mainmenu_option next_comment
comment 'ISDN subsystem'
if [ "$CONFIG_NET" != "n" ]; then
  tristate 'ISDN support' CONFIG_ISDN
  if [ "$CONFIG_ISDN" != "n" ]; then
    source drivers/isdn/Config.in
  fi
fi
endmenu

mainmenu_option next_comment
comment 'Old CD-ROM drivers (not SCSI, not IDE)'

bool 'Support non-SCSI/IDE/ATAPI CDROM drives' CONFIG_CD_NO_IDESCSI
if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then
  source drivers/cdrom/Config.in
fi
endmenu

source drivers/char/Config.in

source drivers/usb/Config.in

source fs/Config.in

if [ "$CONFIG_VT" = "y" ]; then
  mainmenu_option next_comment
  comment 'Console drivers'
  bool 'VGA text console' CONFIG_VGA_CONSOLE
  bool 'Video mode selection support' CONFIG_VIDEO_SELECT
  if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
    tristate 'MDA text console (dual-headed) (EXPERIMENTAL)' CONFIG_MDA_CONSOLE
    bool 'Support for frame buffer devices (EXPERIMENTAL)' CONFIG_FB
  fi
  source drivers/video/Config.in
  endmenu
fi

mainmenu_option next_comment
comment 'Sound'

tristate 'Sound card support' CONFIG_SOUND
if [ "$CONFIG_SOUND" != "n" ]; then
  source drivers/sound/Config.in
fi
endmenu

mainmenu_option next_comment
comment 'Kernel hacking'

#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC
bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ
endmenu