Loading...
#include <linux/module.h> #include <linux/kernel.h> #include <linux/errno.h> #include <asm/uaccess.h> #include <linux/init.h> #include <linux/malloc.h> #include <linux/delay.h> #include <linux/ioctl.h> // #define DEBUG #include "usb.h" /* WARNING: These DATA_DUMP's can produce a lot of data. Caveat Emptor. */ // #define RD_DATA_DUMP /* Enable to dump data - limited to 24 bytes */ // #define WR_DATA_DUMP /* DEBUG does not have to be defined. */ #define IS_EP_BULK(ep) ((ep).bmAttributes == USB_ENDPOINT_XFER_BULK ? 1 : 0) #define IS_EP_BULK_IN(ep) (IS_EP_BULK(ep) && ((ep).bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) #define IS_EP_BULK_OUT(ep) (IS_EP_BULK(ep) && ((ep).bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) #define IS_EP_INTR(ep) ((ep).bmAttributes == USB_ENDPOINT_XFER_INT ? 1 : 0) #define USB_SCN_MINOR(X) MINOR((X)->i_rdev) - SCN_BASE_MNR #ifdef DEBUG #define SCN_DEBUG(X) X #else #define SCN_DEBUG(X) #endif #define IBUF_SIZE 32768 #define OBUF_SIZE 4096 /* FIXME: These are NOT registered ioctls()'s */ #define PV8630_IOCTL_INREQUEST 69 #define PV8630_IOCTL_OUTREQUEST 70 #define SCN_MAX_MNR 16 /* We're allocated 16 minors */ #define SCN_BASE_MNR 48 /* USB Scanners start at minor 48 */ struct scn_usb_data { struct usb_device *scn_dev; struct urb scn_irq; unsigned int ifnum; /* Interface number of the USB device */ kdev_t scn_minor; /* Scanner minor - used in disconnect() */ unsigned char button; /* Front panel buffer */ char isopen; /* Not zero if the device is open */ char present; /* Not zero if device is present */ char *obuf, *ibuf; /* transfer buffers */ char bulk_in_ep, bulk_out_ep, intr_ep; /* Endpoint assignments */ }; static struct scn_usb_data *p_scn_table[SCN_MAX_MNR] = { NULL, /* ... */}; MODULE_AUTHOR("David E. Nelson, dnelson@jump.net, http://www.jump.net/~dnelson"); MODULE_DESCRIPTION("USB Scanner Driver"); static __s32 vendor=-1, product=-1; MODULE_PARM(vendor, "i"); MODULE_PARM_DESC(vendor, "User specified USB idVendor"); MODULE_PARM(product, "i"); MODULE_PARM_DESC(product, "User specified USB idProduct"); /* Forward declarations */ static struct usb_driver scanner_driver; |