Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 | /* aten.c (c) 1997-8 Grant R. Guenther <grant@torque.net> Under the terms of the GNU public license. aten.c is a low-level protocol driver for the ATEN EH-100 parallel port adapter. The EH-100 supports 4-bit and 8-bit modes only. There is also an EH-132 which supports EPP mode transfers. The EH-132 is not yet supported. */ /* Changes: 1.01 GRG 1998.05.05 init_proto, release_proto */ #define ATEN_VERSION "1.01" #include <linux/module.h> #include <linux/delay.h> #include <linux/kernel.h> #include <linux/types.h> #include <asm/io.h> #include "paride.h" #define j44(a,b) ((((a>>4)&0x0f)|(b&0xf0))^0x88) /* cont = 0 - access the IDE register file cont = 1 - access the IDE command set */ static int cont_map[2] = { 0x08, 0x20 }; static void aten_write_regr( PIA *pi, int cont, int regr, int val) { int r; r = regr + cont_map[cont] + 0x80; w0(r); w2(0xe); w2(6); w0(val); w2(7); w2(6); w2(0xc); } static int aten_read_regr( PIA *pi, int cont, int regr ) { int a, b, r; r = regr + cont_map[cont] + 0x40; switch (pi->mode) { case 0: w0(r); w2(0xe); w2(6); w2(7); w2(6); w2(0); a = r1(); w0(0x10); b = r1(); w2(0xc); return j44(a,b); case 1: r |= 0x10; w0(r); w2(0xe); w2(6); w0(0xff); w2(0x27); w2(0x26); w2(0x20); a = r0(); w2(0x26); w2(0xc); return a; } return -1; } static void aten_read_block( PIA *pi, char * buf, int count ) { int k, a, b, c, d; switch (pi->mode) { case 0: w0(0x48); w2(0xe); w2(6); for (k=0;k<count/2;k++) { w2(7); w2(6); w2(2); a = r1(); w0(0x58); b = r1(); w2(0); d = r1(); w0(0x48); c = r1(); buf[2*k] = j44(c,d); buf[2*k+1] = j44(a,b); } w2(0xc); break; case 1: w0(0x58); w2(0xe); w2(6); for (k=0;k<count/2;k++) { w2(0x27); w2(0x26); w2(0x22); a = r0(); w2(0x20); b = r0(); buf[2*k] = b; buf[2*k+1] = a; } w2(0x26); w2(0xc); break; } } static void aten_write_block( PIA *pi, char * buf, int count ) { int k; w0(0x88); w2(0xe); w2(6); for (k=0;k<count/2;k++) { w0(buf[2*k+1]); w2(0xe); w2(6); w0(buf[2*k]); w2(7); w2(6); } w2(0xc); } static void aten_connect ( PIA *pi ) { pi->saved_r0 = r0(); pi->saved_r2 = r2(); w2(0xc); } static void aten_disconnect ( PIA *pi ) { w0(pi->saved_r0); w2(pi->saved_r2); } static void aten_log_adapter( PIA *pi, char * scratch, int verbose ) { char *mode_string[2] = {"4-bit","8-bit"}; printk("%s: aten %s, ATEN EH-100 at 0x%x, ", pi->device,ATEN_VERSION,pi->port); printk("mode %d (%s), delay %d\n",pi->mode, mode_string[pi->mode],pi->delay); } static void aten_init_proto( PIA *pi ) { MOD_INC_USE_COUNT; } static void aten_release_proto( PIA *pi ) { MOD_DEC_USE_COUNT; } struct pi_protocol aten = {"aten",0,2,2,1,1, aten_write_regr, aten_read_regr, aten_write_block, aten_read_block, aten_connect, aten_disconnect, 0, 0, 0, aten_log_adapter, aten_init_proto, aten_release_proto }; #ifdef MODULE int init_module(void) { return pi_register( &aten ) - 1; } void cleanup_module(void) { pi_unregister( &aten ); } #endif /* end of aten.c */ |