$Id: README.eicon,v 1.5 1999/10/11 18:13:25 armin Exp $

(c) 1999 Cytronics & Melware (info@melware.de)

This document describes the eicon driver for the
Eicon.Diehl active ISDN cards.

It is meant to be used with isdn4linux, an ISDN link-level module for Linux.

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.



Supported Cards
===============

Old ISA type
------------
- S-Card ISA
- SX-Card ISA
- SXn-Card ISA
- SCOM-Card ISA
- Quadro-Card ISA
- S2M-Card ISA

DIVA Server family
------------------
- DIVA Server BRI/PCI 2M
- DIVA Server PRI/PCI 2M (9M 23M 30M)
	supported functions of onboard DSPs:
	- analog modem
	- fax group 2/3 (Fax Class 2 commands)
	- DTMF detection


ISDN D-Channel Protocols
------------------------

- ETSI (Euro-DSS1) 
- 1TR6 (German ISDN) *not testet*



You can load the module simply by using the insmod or modprobe function :

  insmod eicon [id=driverid] [membase=<membase>] [irq=<irq>]


The module will automatically probe the PCI-cards. If the id-options
is omitted, the driver will assume 'eicon0' for the first pci card and
increases the digit with each further card. With a given driver-id
the module appends a number starting with '0'.

For ISA-cards you have to specify membase, irq and id. If id or
membase is missing/invalid, the driver will not be loaded except
PCI-cards were found. Additional ISA-cards and irq/membase changes
can be done with the eiconctrl utility.

After loading the module, you have to download the protocol and
dsp-code by using the eiconctrl utility of isdn4k-utils.


Example for loading and starting a BRI card with E-DSS1 Protocol.

	eiconctrl [-d DriverId] load etsi


Example for loading and starting a PRI card with E-DSS1 Protocol.

	eiconctrl [-d DriverId] load etsi -s2 -n


Details about using the eiconctrl utility are in 'man eiconctrl'
or will be printed by starting eiconctrl without any parameters.

Thanks to 
	Deutsche Mailbox Saar-Lor-Lux GmbH
	for sponsoring and testing fax
	capabilities with Diva Server cards.


Any reports about bugs, errors and even wishes are welcome.


Have fun !

Armin Schindler
mac@melware.de
http://www.melware.de