/*
 *    Disk Array driver for Compaq SMART2 Controllers
 *    Copyright 1998 Compaq Computer Corporation
 *
 *    This program is free software; you can redistribute it and/or modify
 *    it under the terms of the GNU General Public License as published by
 *    the Free Software Foundation; either version 2 of the License, or
 *    (at your option) any later version.
 *
 *    This program is distributed in the hope that it will be useful,
 *    but WITHOUT ANY WARRANTY; without even the implied warranty of
 *    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
 *    NON INFRINGEMENT.  See the GNU General Public License for more details.
 *
 *    You should have received a copy of the GNU General Public License
 *    along with this program; if not, write to the Free Software
 *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 *    Questions/Comments/Bugfixes to arrays@compaq.com
 *
 *    If you want to make changes, improve or add functionality to this
 *    driver, you'll probably need the Compaq Array Controller Interface
 *    Specificiation (Document number ECG086/1198)
 */
#include <linux/module.h>
#include <linux/version.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/malloc.h>
#include <linux/delay.h>
#include <linux/major.h>
#include <linux/fs.h>
#include <linux/timer.h>
#include <linux/proc_fs.h>
#include <linux/hdreg.h>
#include <asm/uaccess.h>
#include <asm/spinlock.h>
#include <asm/io.h>


#define SMART2_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))

#define DRIVER_NAME "Compaq SMART2 Driver (v 1.0.5)"
#define DRIVER_VERSION SMART2_DRIVER_VERSION(1,0,5)
#define MAJOR_NR COMPAQ_SMART2_MAJOR
#include <linux/blk.h>
#include <linux/blkdev.h>
#include <linux/genhd.h>

#include "cpqarray.h"
#include "ida_cmd.h"
#include "smart1,2.h"
#include "ida_ioctl.h"

#define READ_AHEAD	128
#define NR_CMDS		128 /* This could probably go as high as ~400 */

#define MAX_CTLR	8
#define CTLR_SHIFT	8

static int nr_ctlr = 0;
static ctlr_info_t *hba[MAX_CTLR] = { 0, 0, 0, 0, 0, 0, 0, 0 };

static int eisa[8] = { 0, 0 ,0 ,0, 0, 0 ,0 ,0 };

#define NR_PRODUCTS (sizeof(products)/sizeof(struct board_type))

/*  board_id = Subsystem Device ID & Vendor ID
 *  product = Marketing Name for the board
 *  access = Address of the struct of function pointers 
 */
struct board_type products[] = {
	{ 0x0040110E, "IDA",			&smart1_access },
	{ 0x0140110E, "IDA-2",			&smart1_access },
	{ 0x1040110E, "IAES",			&smart1_access },
	{ 0x2040110E, "SMART",			&smart1_access },
	{ 0x3040110E, "SMART-2/E",		&smart2e_access },
	{ 0x40300E11, "SMART-2/P",		&smart2_access },
	{ 0x40310E11, "SMART-2SL",		&smart2_access },
	{ 0x40320E11, "Smart Array 3200",	&smart2_access },
	{ 0x40330E11, "Smart Array 3100ES",	&smart2_access },
	{ 0x40340E11, "Smart Array 221",	&smart2_access },
	{ 0x40400E11, "Integrated Array",	&smart4_access },
	{ 0x40500E11, "Smart Array 4200",	&smart4_access },
	{ 0x40510E11, "Smart Array 4250ES",	&smart4_access },
};

static struct hd_struct * ida;
static int * ida_sizes;
static int * ida_blocksizes;
static int * ida_hardsizes;
static struct gendisk ida_gendisk[MAX_CTLR];

struct proc_dir_entry *proc_array = NULL;

/* Debug... */
#define DBG(s)	do { s } while(0)
/* Debug (general info)... */
#define DBGINFO(s) do { } while(0)
/* Debug Paranoid... */
#define DBGP(s)  do { } while(0)
/* Debug Extra Paranoid... */
#define DBGPX(s) do { } while(0)

int cpqarray_init(void);
static int cpqarray_pci_detect(void);
static int cpqarray_pci_init(ctlr_info_t *c, unchar bus, unchar device_fn);
static ulong remap_pci_mem(ulong base, ulong size);
static int cpqarray_eisa_detect(void);
static int pollcomplete(int ctlr);
static void getgeometry(int ctlr);
static void start_fwbk(int ctlr);

static cmdlist_t * cmd_alloc(ctlr_info_t *h);
static void cmd_free(ctlr_info_t *h, cmdlist_t *c);

static int sendcmd(
	__u8	cmd,
	int	ctlr,
	void	*buff,
	size_t	size,
	unsigned int blk,
	unsigned int blkcnt,
	unsigned int log_unit );

static int ida_open(struct inode *inode, struct file *filep);
static int ida_release(struct inode *inode, struct file *filep);
static int ida_ioctl(struct inode *inode, struct file *filep, unsigned int cmd, unsigned long arg);
static int ida_ctlr_ioctl(int ctlr, int dsk, ida_ioctl_t *io);

static void do_ida_request(int i);
/*
 * This is a hack.  This driver eats a major number for each controller, and
 * sets blkdev[xxx].request_fn to each one of these so the real request
 * function knows what controller its working with.
 */
#define DO_IDA_REQUEST(x) { do_ida_request(x); }

static void do_ida_request0(void) DO_IDA_REQUEST(0);
static void do_ida_request1(void) DO_IDA_REQUEST(1);
static void do_ida_request2(void) DO_IDA_REQUEST(2);
static void do_ida_request3(void) DO_IDA_REQUEST(3);
static void do_ida_request4(void) DO_IDA_REQUEST(4);
static void do_ida_request5(void) DO_IDA_REQUEST(5);
static void do_ida_request6(void) DO_IDA_REQUEST(6);
static void do_ida_request7(void) DO_IDA_REQUEST(7);

static void start_io(ctlr_info_t *h);

static inline void addQ(cmdlist_t **Qptr, cmdlist_t *c);
static inline cmdlist_t *removeQ(cmdlist_t **Qptr, cmdlist_t *c);
static inline void complete_buffers(struct buffer_head *bh, int ok);
static inline void complete_command(cmdlist_t *cmd, int timeout);

static void do_ida_intr(int irq, void *dev_id, struct pt_regs * regs);
static void ida_timer(unsigned long tdata);
static int frevalidate_logvol(kdev_t dev);
static int revalidate_logvol(kdev_t dev, int maxusage);
static int revalidate_allvol(kdev_t dev);

static void ida_procinit(int i);
static int ida_proc_get_info(char *buffer, char **start, off_t offset, int length, int *eof, void *data);

static void ida_geninit(struct gendisk *g)
{
	int ctlr = g-ida_gendisk;
	int i,j;
	drv_info_t *drv;

	for(i=0; i<NWD; i++) {
		drv = &hba[ctlr]->drv[i];
		if (!drv->nr_blks)
			continue;
		ida[(ctlr<<CTLR_SHIFT) + (i<<NWD_SHIFT)].nr_sects =
		ida_sizes[(ctlr<<CTLR_SHIFT) + (i<<NWD_SHIFT)] =
				drv->nr_blks;

		for(j=0; j<16; j++) {
			ida_blocksizes[(ctlr<<CTLR_SHIFT) + (i<<NWD_SHIFT)+j] =
				1024;
			ida_hardsizes[(ctlr<<CTLR_SHIFT) + (i<<NWD_SHIFT)+j] =
				drv->blk_size;
		}
		ida_gendisk[ctlr].nr_real++;
	}

}

struct file_operations ida_fops  = {
	NULL,                        /* lseek - default */
	block_read,                  /* read - general block-dev read */
	block_write,                 /* write - general block-dev write */
	NULL,                        /* readdir - bad */
	NULL,                        /* select */
	ida_ioctl,                  /* ioctl */
	NULL,                        /* mmap */
	ida_open,                     /* open code */
	NULL,
	ida_release,                  /* release */
	block_fsync,	              /* fsync */
	NULL,                        /* fasync */
	NULL,			/* Disk change */
	frevalidate_logvol,	/* revalidate */
};


/*
 * Get us a file in /proc/array that says something about each controller.
 * Create /proc/array if it doesn't exist yet.
 */
static void ida_procinit(int i)
{
	struct proc_dir_entry *pd;

	if (proc_array == NULL) {
		proc_array = create_proc_entry("array", S_IFDIR|S_IRUGO|S_IXUGO,
								&proc_root);
		if (!proc_array) return;
	}

	pd = create_proc_entry(hba[i]->devname, S_IFREG|S_IRUGO, proc_array);
	if (!pd) return;
	pd->read_proc = ida_proc_get_info;
	pd->data = hba[i];
}

/*
 * Report information about this controller.
 */
static int ida_proc_get_info(char *buffer, char **start, off_t offset, int length, int *eof, void *data)
{
	off_t pos = 0;
	off_t len = 0;
	int size, i, ctlr;
	ctlr_info_t *h = (ctlr_info_t*)data;
	drv_info_t *drv;
#ifdef CPQ_PROC_PRINT_QUEUES
	cmdlist_t *c;
#endif

	ctlr = h->ctlr;
	size = sprintf(buffer, "%s:  Compaq %s Controller\n"
		"       Board ID: %08lx\n"
		"       Firmware Revision: %c%c%c%c\n"
		"       Controller Sig: %08lx\n"
		"       Memory Address: %08lx\n"
		"       I/O Port: %04x\n"
		"       IRQ: %x\n"
		"       Logical drives: %d\n"
		"       Physical drives: %d\n\n"
		"       Current Q depth: %d\n"
		"       Max Q depth since init: %d\n\n",
		h->devname, 
		h->product_name,
		(unsigned long)h->board_id,
		h->firm_rev[0], h->firm_rev[1], h->firm_rev[2], h->firm_rev[3],
		(unsigned long)h->ctlr_sig, (unsigned long)h->vaddr,
		(unsigned int) h->ioaddr, (unsigned int)h->intr,
		h->log_drives, h->phys_drives,
		h->Qdepth, h->maxQsinceinit);

	pos += size; len += size;
	
	size = sprintf(buffer+len, "Logical Drive Info:\n");
	pos += size; len += size;

	for(i=0; i<h->log_drives; i++) {
		drv = &h->drv[i];
		size = sprintf(buffer+len, "ida/c%dd%d: blksz=%d nr_blks=%d\n",
				ctlr, i, drv->blk_size, drv->nr_blks);
		pos += size; len += size;
	}

#ifdef CPQ_PROC_PRINT_QUEUES
	size = sprintf(buffer+len, "\nCurrent Queues:\n");
	pos += size; len += size;

	c = h->reqQ;
	size = sprintf(buffer+len, "reqQ = %p", c); pos += size; len += size;
	if (c) c=c->next;
	while(c && c != h->reqQ) {
		size = sprintf(buffer+len, "->%p", c);
		pos += size; len += size;
		c=c->next;
	}

	c = h->cmpQ;
	size = sprintf(buffer+len, "\ncmpQ = %p", c); pos += size; len += size;
	if (c) c=c->next;
	while(c && c != h->cmpQ) {
		size = sprintf(buffer+len, "->%p", c);
		pos += size; len += size;
		c=c->next;
	}

	size = sprintf(buffer+len, "\n"); pos += size; len += size;
#endif
	size = sprintf(buffer+len, "nr_allocs = %d\nnr_frees = %d\n",
			h->nr_allocs, h->nr_frees);
	pos += size; len += size;

	*eof = 1;
	*start = buffer+offset;
	len -= offset;
	if (len>length)
		len = length;
	return len;
}

#ifdef MODULE

MODULE_PARM(eisa, "1-8i");
EXPORT_NO_SYMBOLS;

/* This is a bit of a hack... */
int init_module(void)
{
	int i, j;
	if (cpqarray_init() == 0) /* all the block dev numbers already used */
		return -EIO;	  /* or no controllers were found */

	for(i=0; i<nr_ctlr; i++) {
		ida_geninit(&ida_gendisk[i]); 
		for(j=0; j<NWD; j++)	
			if (ida_sizes[(i<<CTLR_SHIFT) + (j<<NWD_SHIFT)])
				resetup_one_dev(&ida_gendisk[i], j);
	}
	return 0;
}
void cleanup_module(void)
{
	int i;
	struct gendisk *g;

	for(i=0; i<nr_ctlr; i++) {
		hba[i]->access.set_intr_mask(hba[i], 0);
		free_irq(hba[i]->intr, hba[i]);
		iounmap((void*)hba[i]->vaddr);
		unregister_blkdev(MAJOR_NR+i, hba[i]->devname);
		del_timer(&hba[i]->timer);
		remove_proc_entry(hba[i]->devname, proc_array);
		kfree(hba[i]->cmd_pool);
		kfree(hba[i]->cmd_pool_bits);

		if (gendisk_head == &ida_gendisk[i]) {
			gendisk_head = ida_gendisk[i].next;
		} else {
			for(g=gendisk_head; g; g=g->next) {
				if (g->next == &ida_gendisk[i]) {
					g->next = ida_gendisk[i].next;
					break;
				}
			}
		}
	}
	remove_proc_entry("array", &proc_root);
	kfree(ida);
	kfree(ida_sizes);
	kfree(ida_hardsizes);
	kfree(ida_blocksizes);


}
#endif /* MODULE */

/*
 *  This is it.  Find all the controllers and register them.  I really hate
 *  stealing all these major device numbers.
 *  returns the number of block devices registered.
 */
int cpqarray_init(void)
{
	void (*request_fns[MAX_CTLR])(void) = {
		do_ida_request0, do_ida_request1,
		do_ida_request2, do_ida_request3,
		do_ida_request4, do_ida_request5,
		do_ida_request6, do_ida_request7,
	};
	int i;
	int num_cntlrs_reg = 0;

	/* detect controllers */
	cpqarray_pci_detect();
	cpqarray_eisa_detect();
	
	if (nr_ctlr == 0)
		return(num_cntlrs_reg);

	printk(DRIVER_NAME "\n");
	printk("Found %d controller(s)\n", nr_ctlr);

	/* allocate space for disk structs */
	ida = kmalloc(sizeof(struct hd_struct)*nr_ctlr*NWD*16, GFP_KERNEL);
	
	if(ida==NULL)
	{
		printk( KERN_ERR "cpqarray: out of memory");
		return(num_cntlrs_reg);
	}
	ida_sizes =      kmalloc(sizeof(int)*nr_ctlr*NWD*16, GFP_KERNEL);
	if(ida_sizes==NULL)
	{
		kfree(ida); 
                printk( KERN_ERR "cpqarray: out of memory");
                return(num_cntlrs_reg);
        }

	ida_blocksizes = kmalloc(sizeof(int)*nr_ctlr*NWD*16, GFP_KERNEL);
	if(ida_blocksizes==NULL)
	{
		kfree(ida);
		kfree(ida_sizes); 
                printk( KERN_ERR "cpqarray: out of memory");
                return(num_cntlrs_reg);
        }

	ida_hardsizes =  kmalloc(sizeof(int)*nr_ctlr*NWD*16, GFP_KERNEL);
	if(ida_hardsizes==NULL)
	{
		kfree(ida);
                kfree(ida_sizes); 
		kfree(ida_blocksizes);
                printk( KERN_ERR "cpqarray: out of memory");
                return(num_cntlrs_reg);
        }

	memset(ida, 0, sizeof(struct hd_struct)*nr_ctlr*NWD*16);
	memset(ida_sizes, 0, sizeof(int)*nr_ctlr*NWD*16);
	memset(ida_blocksizes, 0, sizeof(int)*nr_ctlr*NWD*16);
	memset(ida_hardsizes, 0, sizeof(int)*nr_ctlr*NWD*16);
	memset(ida_gendisk, 0, sizeof(struct gendisk)*MAX_CTLR);

	/* 
	 * register block devices
	 * Find disks and fill in structs
	 * Get an interrupt, set the Q depth and get into /proc
	 */
	for(i=0; i< nr_ctlr; i++) {
	  	/* If this successful it should insure that we are the only */
		/* instance of the driver */	
		if (register_blkdev(MAJOR_NR+i, hba[i]->devname, &ida_fops)) {
                        printk(KERN_ERR "cpqarray: Unable to get major number %d for ida\n",
                                MAJOR_NR+i);
                        continue;
                }

		hba[i]->access.set_intr_mask(hba[i], 0);
		if (request_irq(hba[i]->intr, do_ida_intr,
			SA_INTERRUPT|SA_SHIRQ, hba[i]->devname, hba[i])) {

			printk(KERN_ERR "cpqarray: Unable to get irq %d for %s\n", 
				hba[i]->intr, hba[i]->devname);
			unregister_blkdev(MAJOR_NR+i, hba[i]->devname);
			continue;
		}
		num_cntlrs_reg++;
		hba[i]->cmd_pool = (cmdlist_t *)kmalloc(
				NR_CMDS * sizeof(cmdlist_t), GFP_KERNEL);
		hba[i]->cmd_pool_bits = (__u32*)kmalloc(
				((NR_CMDS+31)/32)*sizeof(__u32), GFP_KERNEL);
		
		if(hba[i]->cmd_pool_bits == NULL || hba[i]->cmd_pool == NULL)
		{
			nr_ctlr = i; 
			if(hba[i]->cmd_pool_bits)
				kfree(hba[i]->cmd_pool_bits);
			if(hba[i]->cmd_pool)
				kfree(hba[i]->cmd_pool);
			free_irq(hba[i]->intr, hba[i]);
			unregister_blkdev(MAJOR_NR+i, hba[i]->devname);
			num_cntlrs_reg--;
                	printk( KERN_ERR "cpqarray: out of memory");

			/* If num_cntlrs_reg == 0, no controllers worked. 
			 *	init_module will fail, so clean up global 
			 *	memory that clean_module would do.
			*/	
			if (num_cntlrs_reg == 0) 
			{
				kfree(ida);
				kfree(ida_sizes);
				kfree(ida_hardsizes);
				kfree(ida_blocksizes);
			}
                	return(num_cntlrs_reg);
	
		}
		memset(hba[i]->cmd_pool, 0, NR_CMDS * sizeof(cmdlist_t));
		memset(hba[i]->cmd_pool_bits, 0, ((NR_CMDS+31)/32)*sizeof(__u32));
		printk(KERN_INFO "cpqarray: Finding drives on %s", 
			hba[i]->devname);
		getgeometry(i);
		start_fwbk(i); 

		hba[i]->access.set_intr_mask(hba[i], FIFO_NOT_EMPTY);

		ida_procinit(i);
		ida_gendisk[i].major = MAJOR_NR + i;
		ida_gendisk[i].major_name = "ida";
		ida_gendisk[i].minor_shift = NWD_SHIFT;
		ida_gendisk[i].max_p = 16;
		ida_gendisk[i].max_nr = 16;
		ida_gendisk[i].init = ida_geninit;
		ida_gendisk[i].part = ida + (i*256);
		ida_gendisk[i].sizes = ida_sizes + (i*256);
		/* ida_gendisk[i].nr_real is handled by getgeometry */
	
		blk_dev[MAJOR_NR+i].request_fn = request_fns[i];
		blksize_size[MAJOR_NR+i] = ida_blocksizes + (i*256);
		hardsect_size[MAJOR_NR+i] = ida_hardsizes + (i*256);
		read_ahead[MAJOR_NR+i] = READ_AHEAD;

		/* Get on the disk list */
		ida_gendisk[i].next = gendisk_head;
		gendisk_head = &ida_gendisk[i];

		init_timer(&hba[i]->timer);
		hba[i]->timer.expires = jiffies + IDA_TIMER;
		hba[i]->timer.data = (unsigned long)hba[i];
		hba[i]->timer.function = ida_timer;
		add_timer(&hba[i]->timer);

	}
	/* done ! */
	return(num_cntlrs_reg);
}

/*
 * Find the controller and initialize it
 *  Cannot use the class code to search, because older array controllers use
 *    0x018000 and new ones use 0x010400.  So I might as well search for each
 *    each device IDs, being there are only going to be three of them. 
 */
static int cpqarray_pci_detect(void)
{
	int index;
	unchar bus=0, dev_fn=0;

#define IDA_BOARD_TYPES 3
	static int ida_vendor_id[IDA_BOARD_TYPES] = { PCI_VENDOR_ID_DEC, 
		PCI_VENDOR_ID_NCR, PCI_VENDOR_ID_COMPAQ };
	static int ida_device_id[IDA_BOARD_TYPES] = { PCI_DEVICE_ID_COMPAQ_42XX,
		PCI_DEVICE_ID_NCR_53C1510, PCI_DEVICE_ID_COMPAQ_SMART2P };
	int brdtype;
	
	/* search for all PCI board types that could be for this driver */
	for(brdtype=0; brdtype<IDA_BOARD_TYPES; brdtype++)
	{
		for(index=0; ; index++) {
			if (pcibios_find_device(ida_vendor_id[brdtype],
			 	ida_device_id[brdtype], index, &bus, &dev_fn))
				break;
			printk(KERN_DEBUG "cpqarray: Device %x has been found at %x %x\n",
				ida_vendor_id[brdtype], bus, dev_fn);
			if (index == 1000000) break;
			if (nr_ctlr == 8) {
				printk(KERN_WARNING "cpqarray: This driver"
				" supports a maximum of 8 controllers.\n");
				break;
			}

			/* if it is a PCI_DEVICE_ID_NCR_53C1510, make sure it's 
				the Compaq version of the chip */ 

			if (ida_device_id[brdtype] == PCI_DEVICE_ID_NCR_53C1510)
			{	
				unsigned short subvendor=0;
				if(pcibios_read_config_word(bus, dev_fn, 
                        		PCI_SUBSYSTEM_VENDOR_ID, &subvendor))
                		{
                        		printk(KERN_DEBUG "cpqarray: failed to read subvendor\n");
                        		continue;
                		}
				if(subvendor !=  PCI_VENDOR_ID_COMPAQ)
				{
					printk(KERN_DEBUG 
						"cpqarray: not a Compaq integrated array controller\n");
					continue;
				}
			}
			hba[nr_ctlr] = kmalloc(sizeof(ctlr_info_t), GFP_KERNEL);
			if(hba[nr_ctlr]==NULL)
			{
				printk(KERN_ERR "cpqarray: out of memory.\n");
				continue;
			}
			memset(hba[nr_ctlr], 0, sizeof(ctlr_info_t));
			if (cpqarray_pci_init(hba[nr_ctlr], bus, dev_fn) != 0)
			{
				kfree(hba[nr_ctlr]);
				continue;
			}
			sprintf(hba[nr_ctlr]->devname, "ida%d", nr_ctlr);
			hba[nr_ctlr]->ctlr = nr_ctlr;
			nr_ctlr++;

		}
	}

	return nr_ctlr;
}
/*
 * Find the IO address of the controller, its IRQ and so forth.  Fill
 * in some basic stuff into the ctlr_info_t structure.
 */
static int cpqarray_pci_init(ctlr_info_t *c, unchar bus, unchar device_fn)
{
	ushort vendor_id, device_id, command;
	unchar cache_line_size, latency_timer;
	unchar irq, revision;
	uint addr[6];
	__u32 board_id;
	struct pci_dev *pdev;

	int i;

	pdev = pci_find_slot(bus, device_fn);
	vendor_id = pdev->vendor;
	device_id = pdev->device;
	irq = pdev->irq;

	for(i=0; i<6; i++)
		addr[i] = pdev->base_address[i];

	(void) pcibios_read_config_word(bus, device_fn,
					PCI_COMMAND,&command);
	(void) pcibios_read_config_byte(bus, device_fn,
					PCI_CLASS_REVISION,&revision);
	(void) pcibios_read_config_byte(bus, device_fn,
					PCI_CACHE_LINE_SIZE, &cache_line_size);
	(void) pcibios_read_config_byte(bus, device_fn,
					PCI_LATENCY_TIMER, &latency_timer);

	(void) pcibios_read_config_dword(bus, device_fn, 0x2c, &board_id);

DBGINFO(
	printk("vendor_id = %x\n", vendor_id);
	printk("device_id = %x\n", device_id);
	printk("command = %x\n", command);
	for(i=0; i<6; i++)
		printk("addr[%d] = %x\n", i, addr[i]);
	printk("revision = %x\n", revision);
	printk("irq = %x\n", irq);
	printk("cache_line_size = %x\n", cache_line_size);
	printk("latency_timer = %x\n", latency_timer);
	printk("board_id = %x\n", board_id);
);

	c->intr = irq;
	c->ioaddr = addr[0] & ~0x1;

	/*
	 * Memory base addr is first addr with the first bit _not_ set
	 */
	for(i=0; i<6; i++)
		if (!(addr[i] & 0x1)) {
			c->paddr = addr[i];
			break;
		}
	c->vaddr = remap_pci_mem(c->paddr, 128);
	c->board_id = board_id;

	for(i=0; i<NR_PRODUCTS; i++) {
		if (board_id == products[i].board_id) {
			c->product_name = products[i].product_name;
			c->access = *(products[i].access);
			break;
		}
	}
	if (i == NR_PRODUCTS) {
		printk(KERN_WARNING "cpqarray: Sorry, I don't know how"
			" to access the SMART Array controller %08lx\n", 
				(unsigned long)board_id);
		return -1;
	}

	return 0;
}

/*
 * Map (physical) PCI mem into (virtual) kernel space
 */
static ulong remap_pci_mem(ulong base, ulong size)
{
        ulong page_base        = ((ulong) base) & PAGE_MASK;
        ulong page_offs        = ((ulong) base) - page_base;
        ulong page_remapped    = (ulong) ioremap(page_base, page_offs+size);

        return (ulong) (page_remapped ? (page_remapped + page_offs) : 0UL);
}

/*
 * Copy the contents of the ints[] array passed to us by init.
 */
void cpqarray_setup(char *str, int *ints)
{
	int i;
	for(i=0; i<ints[0] && i<8; i++)
		eisa[i] = ints[i+1];
}

/*
 * Find an EISA controller's signature.  Set up an hba if we find it.
 */
static int cpqarray_eisa_detect(void)
{
	int i=0, j;
	__u32 board_id;
	int intr;

	while(i<8 && eisa[i]) {
		if (nr_ctlr == 8) {
			printk(KERN_WARNING "cpqarray: This driver supports"
				" a maximum of 8 controllers.\n");
			break;
		}
		board_id = inl(eisa[i]+0xC80);
		for(j=0; j < NR_PRODUCTS; j++)
			if (board_id == products[j].board_id) 
				break;

		if (j == NR_PRODUCTS) {
			printk(KERN_WARNING "cpqarray: Sorry, I don't know how"
				" to access the SMART Array controller %08lx\n",
				 (unsigned long)board_id);
			continue;
		}
		hba[nr_ctlr] = kmalloc(sizeof(ctlr_info_t), GFP_KERNEL);
		if(hba[nr_ctlr]==NULL)
		{
			printk(KERN_ERR "cpqarray: out of memory.\n");
			continue;
		}
		memset(hba[nr_ctlr], 0, sizeof(ctlr_info_t));
		hba[nr_ctlr]->ioaddr = eisa[i];

		/*
		 * Read the config register to find our interrupt
		 */
		intr = inb(eisa[i]+0xCC0) >> 4;
		if (intr & 1) intr = 11;
		else if (intr & 2) intr = 10;
		else if (intr & 4) intr = 14;
		else if (intr & 8) intr = 15;
		
		hba[nr_ctlr]->intr = intr;
		sprintf(hba[nr_ctlr]->devname, "ida%d", nr_ctlr);
		hba[nr_ctlr]->product_name = products[j].product_name;
		hba[nr_ctlr]->access = *(products[j].access);
		hba[nr_ctlr]->ctlr = nr_ctlr;
		hba[nr_ctlr]->board_id = board_id;

DBGINFO(
	printk("i = %d, j = %d\n", i, j);
	printk("irq = %x\n", intr);
	printk("product name = %s\n", products[j].product_name);
	printk("board_id = %x\n", board_id);
);

		nr_ctlr++;
		i++;
	}

	return nr_ctlr;
}


/*
 * Open.  Make sure the device is really there.
 */
static int ida_open(struct inode *inode, struct file *filep)
{
	int ctlr = MAJOR(inode->i_rdev) - MAJOR_NR;
	int dsk  = MINOR(inode->i_rdev) >> NWD_SHIFT;

	DBGINFO(printk("ida_open %x (%x:%x)\n", inode->i_rdev, ctlr, dsk) );
	if (ctlr > MAX_CTLR || hba[ctlr] == NULL)
		return -ENXIO;

	if (!suser() && ida_sizes[(ctlr << CTLR_SHIFT) +
						MINOR(inode->i_rdev)] == 0)
		return -ENXIO;

	/*
	 * Root is allowed to open raw volume zero even if its not configured
	 * so array config can still work.  I don't think I really like this,
	 * but I'm already using way to many device nodes to claim another one
	 * for "raw controller".
	 */
	if (suser()
		&& ida_sizes[(ctlr << CTLR_SHIFT) + MINOR(inode->i_rdev)] == 0 
		&& MINOR(inode->i_rdev) != 0)
		return -ENXIO;

	hba[ctlr]->drv[dsk].usage_count++;
	hba[ctlr]->usage_count++;
	MOD_INC_USE_COUNT;
	return 0;
}

/*
 * Close.  Sync first.
 */
static int ida_release(struct inode *inode, struct file *filep)
{
	int ctlr = MAJOR(inode->i_rdev) - MAJOR_NR;
	int dsk  = MINOR(inode->i_rdev) >> NWD_SHIFT;

	DBGINFO(printk("ida_release %x (%x:%x)\n", inode->i_rdev, ctlr, dsk) );
	fsync_dev(inode->i_rdev);

	hba[ctlr]->drv[dsk].usage_count--;
	hba[ctlr]->usage_count--;
	MOD_DEC_USE_COUNT;
	return 0;
}

/*
 * Enqueuing and dequeuing functions for cmdlists.
 */
static inline void addQ(cmdlist_t **Qptr, cmdlist_t *c)
{
	if (*Qptr == NULL) {
		*Qptr = c;
		c->next = c->prev = c;
	} else {
		c->prev = (*Qptr)->prev;
		c->next = (*Qptr);
		(*Qptr)->prev->next = c;
		(*Qptr)->prev = c;
	}
}

static inline cmdlist_t *removeQ(cmdlist_t **Qptr, cmdlist_t *c)
{
	if (c && c->next != c) {
		if (*Qptr == c) *Qptr = c->next;
		c->prev->next = c->next;
		c->next->prev = c->prev;
	} else {
		*Qptr = NULL;
	}
	return c;
}

/*
 * Get a request and submit it to the controller.
 * This routine needs to grab all the requests it possibly can from the
 * req Q and submit them.  Interrupts are off (and need to be off) when you
 * are in here (either via the dummy do_ida_request functions or by being
 * called from the interrupt handler
 */
static void do_ida_request(int ctlr)
{
	ctlr_info_t *h = hba[ctlr];
	cmdlist_t *c;
	int seg, sect;
	char *lastdataend;
	struct buffer_head *bh;
	struct request *creq;

	creq = blk_dev[MAJOR_NR+ctlr].current_request;
	if (creq == NULL || creq->rq_status == RQ_INACTIVE)
	{
		start_io(h);
		return;
	}

	if (ctlr != MAJOR(creq->rq_dev)-MAJOR_NR ||
		ctlr > nr_ctlr || h == NULL) {
		printk("cpqarray: doreq cmd for %d, %x at %p\n",
				ctlr, creq->rq_dev, creq);
		complete_buffers(creq->bh, 0);
	 	start_io(h);	
		return;
	}

	if ((c = cmd_alloc(h)) == NULL)
	{
		start_io(h);
		return;
	}

	bh = creq->bh;

	c->ctlr = ctlr;
	c->hdr.unit = MINOR(creq->rq_dev) >> NWD_SHIFT;
	c->hdr.size = sizeof(rblk_t) >> 2;
	c->size += sizeof(rblk_t);

	c->req.hdr.blk = ida[(ctlr<<CTLR_SHIFT) + MINOR(creq->rq_dev)].start_sect + creq->sector;
	c->bh = bh;
DBGPX(
	if (bh == NULL)
		panic("bh == NULL?");
	
	printk("sector=%d, nr_sectors=%d\n", creq->sector, creq->nr_sectors);
);
	seg = 0; lastdataend = NULL;
	sect = 0;
	while(bh) {
		sect += bh->b_size/512;
DBGPX(
		if (bh->b_size % 512) {
			printk("Oh damn.  %d+%d, size = %d\n", creq->sector, sect, bh->b_size);
			panic("b_size %% 512 != 0");
		}
);
		if (bh->b_data == lastdataend) {
			c->req.sg[seg-1].size += bh->b_size;
			lastdataend += bh->b_size;
		} else {
			c->req.sg[seg].size = bh->b_size;
			c->req.sg[seg].addr = (__u32)virt_to_bus(bh->b_data);
			lastdataend = bh->b_data + bh->b_size;
			if (++seg == SG_MAX)
				break;
		}
		bh = bh->b_reqnext;
	}
DBGPX(	printk("Submitting %d sectors in %d segments\n", sect, seg); );
	c->req.hdr.sg_cnt = seg;
	c->req.hdr.blk_cnt = sect;

	creq->sector += sect;
	creq->nr_sectors -= sect;

	/* Ready the next request:
	 * Fix up creq if we still have more buffers in the buffer chain, or
	 * mark this request as done and ready the next one.
         */
	if (creq->nr_sectors) {
DBGPX(
		if (bh==NULL) {
			printk("sector=%d, nr_sectors=%d, sect=%d, seg=%d\n",
				creq->sector, creq->nr_sectors, sect, seg);
			panic("mother...");
		}
);
		creq->bh = bh->b_reqnext;
		bh->b_reqnext = NULL;
DBGPX(		printk("More to do on same request %p\n", creq); );
	} else {
DBGPX(		printk("Done with %p, queueing %p\n", creq, creq->next); );
		creq->rq_status = RQ_INACTIVE;
		blk_dev[MAJOR_NR+ctlr].current_request = creq->next;
		wake_up(&wait_for_request);
	}

	c->req.hdr.cmd = (creq->cmd == READ) ? IDA_READ : IDA_WRITE;
	c->type = CMD_RWREQ;

	/* Put the request on the tail of the request queue */
	addQ(&h->reqQ, c);
	h->Qdepth++;
	if (h->Qdepth > h->maxQsinceinit) 
		h->maxQsinceinit = h->Qdepth;

	start_io(h);
}

/* 
 * start_io submits everything on a controller's request queue
 * and moves it to the completion queue.
 *
 * Interrupts had better be off if you're in here
 */
static void start_io(ctlr_info_t *h)
{
	cmdlist_t *c;

	while((c = h->reqQ) != NULL) {
		/* Can't do anything if we're busy */
		if (h->access.fifo_full(h) == 0)
			return;

		/* Get the first entry from the request Q */
		removeQ(&h->reqQ, c);
		h->Qdepth--;
	
		/* Tell the controller to do our bidding */
		h->access.submit_command(h, c);

		/* Get onto the completion Q */
		addQ(&h->cmpQ, c);
	}
}

static inline void complete_buffers(struct buffer_head *bh, int ok)
{
	struct buffer_head *xbh;
	while(bh) {
		xbh = bh->b_reqnext;
		bh->b_reqnext = NULL;
		
		bh->b_end_io(bh, ok);

		bh = xbh;
	}
}
/*
 * Mark all buffers that cmd was responsible for
 */
static inline void complete_command(cmdlist_t *cmd, int timeout)
{
	char buf[80];
	int ok=1;

	if (cmd->req.hdr.rcode & RCODE_NONFATAL &&
	   (hba[cmd->ctlr]->misc_tflags & MISC_NONFATAL_WARN) == 0) {
		sprintf(buf, "Non Fatal error on ida/c%dd%d\n",
				cmd->ctlr, cmd->hdr.unit);
		console_print(buf);
		hba[cmd->ctlr]->misc_tflags |= MISC_NONFATAL_WARN;
	}
	if (cmd->req.hdr.rcode & RCODE_FATAL) {
		sprintf(buf, "Fatal error on ida/c%dd%d\n",
				cmd->ctlr, cmd->hdr.unit);
		console_print(buf);
		ok = 0;
	}
	if (cmd->req.hdr.rcode & RCODE_INVREQ) {
				sprintf(buf, "Invalid request on ida/c%dd%d = (cmd=%x sect=%d cnt=%d sg=%d ret=%x)\n",
				cmd->ctlr, cmd->hdr.unit, cmd->req.hdr.cmd,
				cmd->req.hdr.blk, cmd->req.hdr.blk_cnt,
				cmd->req.hdr.sg_cnt, cmd->req.hdr.rcode);
		console_print(buf);
		ok = 0;	
	}
	if (timeout) ok = 0;
	complete_buffers(cmd->bh, ok);
}

/*
 *  The controller will interrupt us upon completion of commands.
 *  Find the command on the completion queue, remove it, tell the OS and
 *  try to queue up more IO
 */
static void do_ida_intr(int irq, void *dev_id, struct pt_regs *regs)
{
	ctlr_info_t *h = dev_id;
	cmdlist_t *c;
	unsigned long istat;
	unsigned long flags;
	__u32 a,a1;


	istat = h->access.intr_pending(h);
	/* Is this interrupt for us? */
	if (istat == 0)
		return;

	/*
	 * If there are completed commands in the completion queue,
	 * we had better do something about it.
	 */
	spin_lock_irqsave(&io_request_lock, flags);
	if (istat & FIFO_NOT_EMPTY) {
		while((a = h->access.command_completed(h))) {
			a1 = a; a &= ~3;
			if ((c = h->cmpQ) == NULL)
			{  
				printk(KERN_WARNING "cpqarray: Completion of %08lx ignored\n", (unsigned long)a1);
				continue;	
			} 
			while(c->busaddr != a) {
				c = c->next;
				if (c == h->cmpQ) 
					break;
			}
			/*
			 * If we've found the command, take it off the
			 * completion Q and free it
			 */
			if (c->busaddr == a) {
				removeQ(&h->cmpQ, c);
				if (c->type == CMD_RWREQ) {
					complete_command(c, 0);
					cmd_free(h, c);
				} else if (c->type == CMD_IOCTL_PEND) {
					c->type = CMD_IOCTL_DONE;
				}
				continue;
			}
		}
	}

	/*
	 * See if we can queue up some more IO
	 */
	do_ida_request(h->ctlr);
	spin_unlock_irqrestore(&io_request_lock, flags);
}

/*
 * This timer was for timing out requests that haven't happened after
 * IDA_TIMEOUT.  That wasn't such a good idea.  This timer is used to
 * reset a flags structure so we don't flood the user with
 * "Non-Fatal error" messages.
 */
static void ida_timer(unsigned long tdata)
{
	ctlr_info_t *h = (ctlr_info_t*)tdata;

	h->timer.expires = jiffies + IDA_TIMER;
	add_timer(&h->timer);
	h->misc_tflags = 0;
}

/*
 *  ida_ioctl does some miscellaneous stuff like reporting drive geometry,
 *  setting readahead and submitting commands from userspace to the controller.
 */
static int ida_ioctl(struct inode *inode, struct file *filep, unsigned int cmd, unsigned long arg)
{
	int ctlr = MAJOR(inode->i_rdev) - MAJOR_NR;
	int dsk  = MINOR(inode->i_rdev) >> NWD_SHIFT;
	int error;
	int diskinfo[4];
	struct hd_geometry *geo = (struct hd_geometry *)arg;
	ida_ioctl_t *io = (ida_ioctl_t*)arg;
	ida_ioctl_t my_io;

	switch(cmd) {
	case HDIO_GETGEO:
		if (hba[ctlr]->drv[dsk].cylinders) {
			diskinfo[0] = hba[ctlr]->drv[dsk].heads;
			diskinfo[1] = hba[ctlr]->drv[dsk].sectors;
			diskinfo[2] = hba[ctlr]->drv[dsk].cylinders;
		} else {
			diskinfo[0] = 0xff;
			diskinfo[1] = 0x3f;
			diskinfo[2] = hba[ctlr]->drv[dsk].nr_blks / (0xff*0x3f);
		}
		put_user(diskinfo[0], &geo->heads);
		put_user(diskinfo[1], &geo->sectors);
		put_user(diskinfo[2], &geo->cylinders);
		put_user(ida[(ctlr<<CTLR_SHIFT)+MINOR(inode->i_rdev)].start_sect, &geo->start);
		return 0;
	case IDAGETDRVINFO:
		return copy_to_user(&io->c.drv,&hba[ctlr]->drv[dsk],sizeof(drv_info_t));
	case BLKGETSIZE:
		if (!arg) return -EINVAL;
		put_user(ida[(ctlr<<CTLR_SHIFT)+MINOR(inode->i_rdev)].nr_sects, (long*)arg);
		return 0;
	case BLKRASET:
		if (!suser()) return -EACCES;
		if (!(inode->i_rdev)) return -EINVAL;
		if (arg>0xff) return -EINVAL;
		read_ahead[MAJOR(inode->i_rdev)] = arg;
		return 0;
	case BLKRAGET:
		if (!arg) return -EINVAL;
		put_user(read_ahead[MAJOR(inode->i_rdev)], (int*)arg);
		return 0;
	case BLKRRPART:
		return revalidate_logvol(inode->i_rdev, 1);
	case IDAPASSTHRU:
		if (!suser()) return -EPERM;
		error = copy_from_user(&my_io, io, sizeof(my_io));
		if (error) return error;
		error = ida_ctlr_ioctl(ctlr, dsk, &my_io);
		if (error) return error;
		error = copy_to_user(io, &my_io, sizeof(my_io));
		return error;
	case IDAGETCTLRSIG:
		if (!arg) return -EINVAL;
		put_user(hba[ctlr]->ctlr_sig, (int*)arg);
		return 0;
	case IDAREVALIDATEVOLS:
		return revalidate_allvol(inode->i_rdev);
	case IDADRIVERVERSION:
		if (!arg) return -EINVAL;
		put_user(DRIVER_VERSION, (unsigned long*)arg);
		return 0;

	RO_IOCTLS(inode->i_rdev, arg);

	default:
		return -EBADRQC;
	}
		
}
/*
 * ida_ctlr_ioctl is for passing commands to the controller from userspace.
 * The command block (io) has already been copied to kernel space for us,
 * however, any elements in the sglist need to be copied to kernel space
 * or copied back to userspace.
 *
 * Only root may perform a controller passthru command, however I'm not doing
 * any serious sanity checking on the arguments.  Doing an IDA_WRITE_MEDIA and
 * putting a 64M buffer in the sglist is probably a *bad* idea.
 */
static int ida_ctlr_ioctl(int ctlr, int dsk, ida_ioctl_t *io)
{
	ctlr_info_t *h = hba[ctlr];
	cmdlist_t *c;
	void *p = NULL;
	unsigned long flags;
	int error;

	if ((c = cmd_alloc(NULL)) == NULL)
		return -ENOMEM;
	c->ctlr = ctlr;
	c->hdr.unit = (io->unit & UNITVALID) ? (io->unit & ~UNITVALID) : dsk;
	c->hdr.size = sizeof(rblk_t) >> 2;
	c->size += sizeof(rblk_t);

	c->req.hdr.cmd = io->cmd;
	c->req.hdr.blk = io->blk;
	c->req.hdr.blk_cnt = io->blk_cnt;
	c->type = CMD_IOCTL_PEND;

	/* Pre submit processing */
	switch(io->cmd) {
	case PASSTHRU_A:
		p = kmalloc(io->sg[0].size, GFP_KERNEL);
		if (!p) 
		{ 
			error = -ENOMEM; 
			cmd_free(NULL, c); 
			return(error);
		}
		copy_from_user(p, (void*)io->sg[0].addr, io->sg[0].size);
		c->req.bp = virt_to_bus(&(io->c));
		c->req.sg[0].size = io->sg[0].size;
		c->req.sg[0].addr = virt_to_bus(p);
		c->req.hdr.sg_cnt = 1;
		break;
	case IDA_READ:
		p = kmalloc(io->sg[0].size, GFP_KERNEL);
		if (!p) 
		{ 
                        error = -ENOMEM; 
                        cmd_free(NULL, c);
                        return(error);
                }

		c->req.sg[0].size = io->sg[0].size;
		c->req.sg[0].addr = virt_to_bus(p);
		c->req.hdr.sg_cnt = 1;
		break;
	case IDA_WRITE:
	case IDA_WRITE_MEDIA:
	case DIAG_PASS_THRU:
		p = kmalloc(io->sg[0].size, GFP_KERNEL);
		if (!p) 
 		{ 
                        error = -ENOMEM; 
                        cmd_free(NULL, c);
                        return(error);
                }
		copy_from_user(p, (void*)io->sg[0].addr, io->sg[0].size);
		c->req.sg[0].size = io->sg[0].size;
		c->req.sg[0].addr = virt_to_bus(p);
		c->req.hdr.sg_cnt = 1;
		break;
	default:
		c->req.sg[0].size = sizeof(io->c);
		c->req.sg[0].addr = virt_to_bus(&io->c);
		c->req.hdr.sg_cnt = 1;
	}

	/* Put the request on the tail of the request queue */
	spin_lock_irqsave(&io_request_lock, flags);
	addQ(&h->reqQ, c);
	h->Qdepth++;
	start_io(h);
	spin_unlock_irqrestore(&io_request_lock, flags);

	/* Wait for completion */
	while(c->type != CMD_IOCTL_DONE)
		schedule();

	/* Post submit processing */
	switch(io->cmd) {
	case PASSTHRU_A:
	case IDA_READ:
	case DIAG_PASS_THRU:
		copy_to_user((void*)io->sg[0].addr, p, io->sg[0].size);
		/* fall through and free p */
	case IDA_WRITE:
	case IDA_WRITE_MEDIA:
		kfree(p);
		break;
	default:
		/* Nothing to do */
	}

	io->rcode = c->req.hdr.rcode;
	cmd_free(NULL, c);
	return(0);
}

/*
 * Commands are pre-allocated in a large block.  Here we use a simple bitmap
 * scheme to suballocte them to the driver.  Operations that are not time
 * critical (and can wait for kmalloc and possibly sleep) can pass in NULL
 * as the first argument to get a new command.
 */
static cmdlist_t * cmd_alloc(ctlr_info_t *h)
{
	cmdlist_t * c;
	int i;

	if (h == NULL) {
		c = (cmdlist_t*)kmalloc(sizeof(cmdlist_t), GFP_KERNEL);
		if(c==NULL)
			return NULL;
	} else {
		do {
			i = find_first_zero_bit(h->cmd_pool_bits, NR_CMDS);
			if (i == NR_CMDS)
				return NULL;
		} while(test_and_set_bit(i%32, h->cmd_pool_bits+(i/32)) != 0);
		c = h->cmd_pool + i;
		h->nr_allocs++;
	}

	memset(c, 0, sizeof(cmdlist_t));
	c->busaddr = virt_to_bus(c);
	return c;
}

static void cmd_free(ctlr_info_t *h, cmdlist_t *c)
{
	int i;

	if (h == NULL) {
		kfree(c);
	} else {
		i = c - h->cmd_pool;
		clear_bit(i%32, h->cmd_pool_bits+(i/32));
		h->nr_frees++;
	}
}

/***********************************************************************
    name:        sendcmd
    Send a command to an IDA using the memory mapped FIFO interface
    and wait for it to complete.  
    This routine should only be called at init time.
***********************************************************************/
static int sendcmd(
	__u8	cmd,
	int	ctlr,
	void	*buff,
	size_t	size,
	unsigned int blk,
	unsigned int blkcnt,
	unsigned int log_unit )
{
	cmdlist_t *c;
	int complete;
	unsigned long temp;
	unsigned long i;
	ctlr_info_t *info_p = hba[ctlr];

	c = cmd_alloc(info_p);
	c->ctlr = ctlr;
	c->hdr.unit = log_unit;
	c->hdr.prio = 0;
	c->hdr.size = sizeof(rblk_t) >> 2;
	c->size += sizeof(rblk_t);

	/* The request information. */
	c->req.hdr.next = 0;
	c->req.hdr.rcode = 0;
	c->req.bp = 0;
	c->req.hdr.sg_cnt = 1;
	c->req.hdr.reserved = 0;
	
	if (size == 0)
		c->req.sg[0].size = 512;
	else
		c->req.sg[0].size = size;

	c->req.hdr.blk = blk;
	c->req.hdr.blk_cnt = blkcnt;
	c->req.hdr.cmd = (unsigned char) cmd;
	c->req.sg[0].addr = (__u32) virt_to_bus(buff);
	/*
	 * Disable interrupt
	 */
	info_p->access.set_intr_mask(info_p, 0);
	/* Make sure there is room in the command FIFO */
	/* Actually it should be completely empty at this time. */
	for (i = 200000; i > 0; i--) {
		temp = info_p->access.fifo_full(info_p);
		if (temp != 0) {
			break;
		}
		udelay(10);
DBG(
		printk(KERN_WARNING "cpqarray ida%d: idaSendPciCmd FIFO full,"
			" waiting!\n", ctlr);
);
	} 
	/*
	 * Send the cmd
	 */
	info_p->access.submit_command(info_p, c);
	complete = pollcomplete(ctlr);
	if (complete != 1) {
		if (complete != c->busaddr) {
			printk( KERN_WARNING
			"cpqarray ida%d: idaSendPciCmd "
		      "Invalid command list address returned! (%08lx)\n",
				ctlr, (unsigned long)complete);
			cmd_free(info_p, c);
			return (IO_ERROR);
		}
	} else {
		printk( KERN_WARNING
			"cpqarray ida%d: idaSendPciCmd Timeout out, "
			"No command list address returned!\n",
			ctlr);
		cmd_free(info_p, c);
		return (IO_ERROR);
	}

	if (c->req.hdr.rcode & 0x00FE) {
		if (!(c->req.hdr.rcode & BIG_PROBLEM)) {
			printk( KERN_WARNING
			"cpqarray ida%d: idaSendPciCmd, error: "
				"Controller failed at init time "
				"cmd: 0x%x, return code = 0x%x\n",
				ctlr, c->req.hdr.cmd, c->req.hdr.rcode);

			cmd_free(info_p, c);
			return (IO_ERROR);
		}
	}
	cmd_free(info_p, c);
	return (IO_OK);
}

static int frevalidate_logvol(kdev_t dev)
{
	return revalidate_logvol(dev, 0);
}

/*
 * revalidate_allvol is for online array config utilities.  After a
 * utility reconfigures the drives in the array, it can use this function
 * (through an ioctl) to make the driver zap any previous disk structs for
 * that controller and get new ones.
 *
 * Right now I'm using the getgeometry() function to do this, but this
 * function should probably be finer grained and allow you to revalidate one
 * particualar logical volume (instead of all of them on a particular
 * controller).
 */
static int revalidate_allvol(kdev_t dev)
{
	int ctlr, i;
	unsigned long flags;

	ctlr = MAJOR(dev) - MAJOR_NR;
	if (MINOR(dev) != 0)
		return -ENXIO;

	spin_lock_irqsave(&io_request_lock, flags);
	if (hba[ctlr]->usage_count > 1) {
		spin_unlock_irqrestore(&io_request_lock, flags);
		printk(KERN_WARNING "cpqarray: Device busy for volume"
			" revalidation (usage=%d)\n", hba[ctlr]->usage_count);
		return -EBUSY;
	}
	spin_unlock_irqrestore(&io_request_lock, flags);
	hba[ctlr]->usage_count++;

	/*
	 * Set the partition and block size structures for all volumes
	 * on this controller to zero.  We will reread all of this data
	 */
	memset(ida+(ctlr*256),            0, sizeof(struct hd_struct)*NWD*16);
	memset(ida_sizes+(ctlr*256),      0, sizeof(int)*NWD*16);
	memset(ida_blocksizes+(ctlr*256), 0, sizeof(int)*NWD*16);
	memset(ida_hardsizes+(ctlr*256),  0, sizeof(int)*NWD*16);
	memset(hba[ctlr]->drv,            0, sizeof(drv_info_t)*NWD);
	ida_gendisk[ctlr].nr_real = 0;

	/*
	 * Tell the array controller not to give us any interupts while
	 * we check the new geometry.  Then turn interrupts back on when
	 * we're done.
	 */
	hba[ctlr]->access.set_intr_mask(hba[ctlr], 0);
	getgeometry(ctlr);
	hba[ctlr]->access.set_intr_mask(hba[ctlr], FIFO_NOT_EMPTY);

	ida_geninit(&ida_gendisk[ctlr]);
	for(i=0; i<NWD; i++)
		if (ida_sizes[(ctlr<<CTLR_SHIFT) + (i<<NWD_SHIFT)])
			revalidate_logvol(dev+(i<<NWD_SHIFT), 2);

	hba[ctlr]->usage_count--;
	return 0;
}

/* Borrowed and adapted from sd.c */
static int revalidate_logvol(kdev_t dev, int maxusage)
{
	int ctlr, target;
	struct gendisk *gdev;
	unsigned long flags;
	int max_p;
	int start;
	int i;

	target = DEVICE_NR(dev);
	ctlr = MAJOR(dev) - MAJOR_NR;
	gdev = &ida_gendisk[ctlr];
	
	spin_lock_irqsave(&io_request_lock, flags);
	if (hba[ctlr]->drv[target].usage_count > maxusage) {
		spin_unlock_irqrestore(&io_request_lock, flags);
		printk(KERN_WARNING "cpqarray: Device busy for "
			"revalidation (usage=%d)\n",
			hba[ctlr]->drv[target].usage_count);
		return -EBUSY;
	}

	hba[ctlr]->drv[target].usage_count++;
	spin_unlock_irqrestore(&io_request_lock, flags);

	max_p = gdev->max_p;
	start = target << gdev->minor_shift;

	for(i=max_p; i>=0; i--) {
		int minor = start+i;
		kdev_t devi = MKDEV(MAJOR_NR + ctlr, minor);
		struct super_block *sb = get_super(devi);
		sync_dev(devi);
		if (sb) invalidate_inodes(sb);
		invalidate_buffers(devi);
		gdev->part[minor].start_sect = 0;	
		gdev->part[minor].nr_sects = 0;	

		/* reset the blocksize so we can read the partition table */
		blksize_size[MAJOR_NR+ctlr][minor] = 1024;
	}

	gdev->part[start].nr_sects =  hba[ctlr]->drv[target].nr_blks;
	resetup_one_dev(gdev, target);
	hba[ctlr]->drv[target].usage_count--;
	return 0;
}


/********************************************************************
    name: pollcomplete
    Wait polling for a command to complete.
    The memory mapped FIFO is polled for the completion.
    Used only at init time, interrupts disabled.
 ********************************************************************/
static int pollcomplete(int ctlr)
{
	int done;
	int i;

	/* Wait (up to 2 seconds) for a command to complete */

	for (i = 200000; i > 0; i--) {
		done = hba[ctlr]->access.command_completed(hba[ctlr]);
		if (done == 0) {
			udelay(10);	/* a short fixed delay */
		} else
			return (done);
	}
	/* Invalid address to tell caller we ran out of time */
	return 1;
}
/*****************************************************************
    start_fwbk
    Starts controller firmwares background processing. 
    Currently only the Integrated Raid controller needs this done.
    If the PCI mem address registers are written to after this, 
	 data corruption may occur
*****************************************************************/
static void start_fwbk(int ctlr)
{
		id_ctlr_t *id_ctlr_buf; 
	int ret_code;

	if(	hba[ctlr]->board_id != 0x40400E11)
	/* Not a Integrated Raid, so there is nothing for us to do */
		return;
	printk(KERN_DEBUG "cpqarray: Starting firmware's background"
		" processing\n");
	/* Command does not return anything, but idasend command needs a 
		buffer */
	id_ctlr_buf = (id_ctlr_t *)kmalloc(sizeof(id_ctlr_t), GFP_KERNEL);
	if(id_ctlr_buf==NULL)
	{
		printk(KERN_WARNING "cpqarray: Out of memory. "
			"Unable to start background processing.\n");
		return;
	}		
	ret_code = sendcmd(RESUME_BACKGROUND_ACTIVITY, ctlr, 
		id_ctlr_buf, 0, 0, 0, 0);
	if(ret_code != IO_OK)
		printk(KERN_WARNING "cpqarray: Unable to start"
			" background processing\n");
	kfree(id_ctlr_buf);
}
/*****************************************************************
    getgeometry
    Get ida logical volume geometry from the controller 
    This is a large bit of code which once existed in two flavors,
    It is used only at init time.
*****************************************************************/
static void getgeometry(int ctlr)
{				
	id_log_drv_t *id_ldrive;
	id_ctlr_t *id_ctlr_buf;
	sense_log_drv_stat_t *id_lstatus_buf;
	config_t *sense_config_buf;
	unsigned int log_unit, log_index;
	int ret_code, size;
	drv_info_t *drv;
	ctlr_info_t *info_p = hba[ctlr];

	info_p->log_drv_map = 0;	
	
	id_ldrive = (id_log_drv_t *)kmalloc(sizeof(id_log_drv_t), GFP_KERNEL);
	if(id_ldrive == NULL)
	{
		printk( KERN_ERR "cpqarray:  out of memory.\n");
		return;
	}
	id_ctlr_buf = (id_ctlr_t *)kmalloc(sizeof(id_ctlr_t), GFP_KERNEL);
	if(id_ctlr_buf == NULL)
	{
		kfree(id_ldrive);
		printk( KERN_ERR "cpqarray:  out of memory.\n");
                return;
        }

	id_lstatus_buf = (sense_log_drv_stat_t *)kmalloc(sizeof(sense_log_drv_stat_t), GFP_KERNEL);
	if(id_lstatus_buf == NULL)
	{
		kfree(id_ctlr_buf);
                kfree(id_ldrive);
                printk( KERN_ERR "cpqarray:  out of memory.\n");
                return;
        }

	sense_config_buf = (config_t *)kmalloc(sizeof(config_t), GFP_KERNEL);
	if(sense_config_buf == NULL)
	{
		kfree(id_lstatus_buf);
                kfree(id_ctlr_buf);
                kfree(id_ldrive);
                printk( KERN_ERR "cpqarray:  out of memory.\n");
                return;
        }

	memset(id_ldrive, 0, sizeof(id_log_drv_t));
	memset(id_ctlr_buf, 0, sizeof(id_ctlr_t));
	memset(id_lstatus_buf, 0, sizeof(sense_log_drv_stat_t));
	memset(sense_config_buf, 0, sizeof(config_t));

	info_p->phys_drives = 0;
	info_p->log_drv_map = 0;
	info_p->drv_assign_map = 0;
	info_p->drv_spare_map = 0;
	info_p->mp_failed_drv_map = 0;	/* only initialized here */
	/* Get controllers info for this logical drive */
	ret_code = sendcmd(ID_CTLR, ctlr, id_ctlr_buf, 0, 0, 0, 0);
	if (ret_code == IO_ERROR) {
		/*
		 * If can't get controller info, set the logical drive map to 0,
		 * so the idastubopen will fail on all logical drives
		 * on the controller.
		 */
		 /* Free all the buffers and return */ 
		printk(KERN_ERR "cpqarray: error sending ID controller\n");
		kfree(sense_config_buf);
                kfree(id_lstatus_buf);
                kfree(id_ctlr_buf);
                kfree(id_ldrive);
                return;
        }

	info_p->log_drives = id_ctlr_buf->nr_drvs;;
	*(__u32*)(info_p->firm_rev) = *(__u32*)(id_ctlr_buf->firm_rev);
	info_p->ctlr_sig = id_ctlr_buf->cfg_sig;

	printk(" (%s)\n", info_p->product_name);
	/*
	 * Initialize logical drive map to zero
	 */
	log_index = 0;
	/*
	 * Get drive geometry for all logical drives
	 */
	if (id_ctlr_buf->nr_drvs > 16)
		printk(KERN_WARNING "cpqarray ida%d:  This driver supports "
			"16 logical drives per controller.\n.  "
			" Additional drives will not be "
			"detected\n", ctlr);

	for (log_unit = 0;
	     (log_index < id_ctlr_buf->nr_drvs)
	     && (log_unit < NWD);
	     log_unit++) {

		size = sizeof(sense_log_drv_stat_t);

		/*
		   Send "Identify logical drive status" cmd
		 */
		ret_code = sendcmd(SENSE_LOG_DRV_STAT,
			     ctlr, id_lstatus_buf, size, 0, 0, log_unit);
		if (ret_code == IO_ERROR) {
			/*
			   If can't get logical drive status, set
			   the logical drive map to 0, so the
			   idastubopen will fail for all logical drives
			   on the controller. 
			 */
			info_p->log_drv_map = 0;	
			printk( KERN_WARNING
			     "cpqarray ida%d: idaGetGeometry - Controller"
				" failed to report status of logical drive %d\n"
			 "Access to this controller has been disabled\n",
				ctlr, log_unit);
			/* Free all the buffers and return */
                	kfree(sense_config_buf);
                	kfree(id_lstatus_buf);
                	kfree(id_ctlr_buf);
                	kfree(id_ldrive);
                	return;
		}
		/*
		   Make sure the logical drive is configured
		 */
		if (id_lstatus_buf->status != LOG_NOT_CONF) {
			ret_code = sendcmd(ID_LOG_DRV, ctlr, id_ldrive,
			       sizeof(id_log_drv_t), 0, 0, log_unit);
			/*
			   If error, the bit for this
			   logical drive won't be set and
			   idastubopen will return error. 
			 */
			if (ret_code != IO_ERROR) {
				drv = &info_p->drv[log_unit];
				drv->blk_size = id_ldrive->blk_size;
				drv->nr_blks = id_ldrive->nr_blks;
				drv->cylinders = id_ldrive->drv.cyl;
				drv->heads = id_ldrive->drv.heads;
				drv->sectors = id_ldrive->drv.sect_per_track;
				info_p->log_drv_map |=	(1 << log_unit);

	printk(KERN_INFO "cpqarray ida/c%dd%d: blksz=%d nr_blks=%d\n",
		ctlr, log_unit, drv->blk_size, drv->nr_blks);
				ret_code = sendcmd(SENSE_CONFIG,
						  ctlr, sense_config_buf,
				 sizeof(config_t), 0, 0, log_unit);
				if (ret_code == IO_ERROR) {
					info_p->log_drv_map = 0;
					/* Free all the buffers and return */
                			printk(KERN_ERR "cpqarray: error sending sense config\n");
                			kfree(sense_config_buf);
                			kfree(id_lstatus_buf);
                			kfree(id_ctlr_buf);
                			kfree(id_ldrive);
                			return;

				}
				info_p->phys_drives =
				    sense_config_buf->ctlr_phys_drv;
				info_p->drv_assign_map
				    |= sense_config_buf->drv_asgn_map;
				info_p->drv_assign_map
				    |= sense_config_buf->spare_asgn_map;
				info_p->drv_spare_map
				    |= sense_config_buf->spare_asgn_map;
			}	/* end of if no error on id_ldrive */
			log_index = log_index + 1;
		}		/* end of if logical drive configured */
	}			/* end of for log_unit */
	kfree(sense_config_buf);
	kfree(id_ldrive);
	kfree(id_lstatus_buf);
	kfree(id_ctlr_buf);
	return;
}